We have critically investigated the ATR-IR spectroscopy data behavior of burned human teeth as opposed to the generally observed behavior in human bones that were subjected to heat treatment, whether deliberate or accidental. It is shown that the deterioration of the crystallinity index (CI) behavior sometimes observed in bones subjected to high temperature appears to be of higher frequency in the case of bioapatite from teeth. This occurs because the formation of the β-tricalcium phosphate (β-TCP) phase, otherwise known as whitlockite, clearly ascertained by the X-ray diffraction (XRD) patterns collected on the same powdered specimens investigated by ATR-IR. These results point to the need of combining more than one physicochemical technique even if apparently well suitable, in order to verify whether the assumed conditions assessed by spectroscopy are fully maintained in the specimens after temperature and/or mechanical processing.
1. Introduction
The study of burned human remains is of considerable importance in archaeology, forensic anthropology, and crime scene investigations. We can have the presence of fire in many situations such as accidents and homicides. In fact fire is a common method for attempting to conceal evidence of criminal activity inflicted on human victims.
To know the temperatures at which a bone was subjected is a great index to better understand the modifications suffered by bone structures due to combustion [1] to promote the differentiation between natural and anthropogenic phenomena and to better interpret the techniques used in the resolution of forensic cases where cremation or other fire damage to remains is present [2–6].
At this microscopic scale, there are two key features influenced by heating that are worth exploring: changes to the elemental composition and changes to the crystalline structure of the bone.
Thus, new and accurate experimental methods are needed to clarify the variety of factors that lead to varying levels of thermal effects.
It has been argued that the most appropriate means of addressing microstructural studies of burned bones are the physicochemical and spectroscopic approaches, such as the Fourier Transform Infrared Spectroscopy (FT-IR) and X-ray diffraction (XRD) [7–14]. In recent years, many researchers have turned their attention to alternative ways of studying and identifying burned bones. For this purpose, the potential of the crystallinity index (CI)—or splitting factor (SF)—has been investigated intensively [9, 15–22], although the applications on real forensic or archaeological scenarios are still rare in literature [20–23]. CI can be measured with both X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). Although both methods have been used in the literature [20, 21, 23], the CI values defined using XRD cannot be directly compared to those created using FT-IR [11, 18, 24].
XRD is ideal for defining a crystallinity parameter of the bioinorganic phase as the pattern involves directly the effect of 3D periodicity (i.e., the organization degree in all directions) of the elementary cell, the smallest unit fundamental for expressing the physical, chemical, and symmetry properties of a crystal. Conversely, the FT-IR spectroscopy supplies a fingerprint of the chemical environment surrounding the bond vibrations excited by the frequencies of the IR incoming beam. Nevertheless, it should be maintained that FT-IR is advantageous to define a fresh bone because it is particularly sensible to the presence of genetic matter as it can be verified in the frequency range 1300–1700 cm−1 [25]. On the contrary, hard X-ray radiation used in diffraction is relatively insensitive to the presence of such component.
FT-IR spectroscopy has the potential for being portable into the field, requires a very small amount of sample, can be cheaper to use, and has been shown to be more accurate at lower burning temperatures [16, 26, 27]. In particular, the methodology of KBr FT-IR, for the sample preparation, involves laborious dilution in a transparent means while with FT-IR ATR (attenuated total reflectance) the infrared beam impinges directly a large area of the sample [18], maximizing the reproducibility of the signals regardless the protocols followed by the operator.
However, the accuracy of temperature determination solely using the FT-IR approach has some critical aspects. In the absence of long range order information, it is generally assumed that the inorganic apatite component remains as a single phase, but this may not always be the case once the bone is subjected to a high-temperature treatment. In fact when bioapatite is subjected to a thermal treatment, we can find also a multiphase condition for the resultant product due to a transformation of a part of hydroxylapatite (HA) to the β-three-calcium-phosphate phase (β-TCP) of a mineral named whitlockite [28].
The presence of β-TCP as well as the presence of other mineralogical phases due to various taphonomy effects can strongly alter the shape of v4-v3 bands; consequently, the calculation of the CI and all the recently proposed ratios by Thompson et al. [29] may not be correct. That is why a multidisciplinary approach would be always advisable, possibly with the combined use of various physicochemical techniques such as ATR-IR and XRD.
In this sense, we present in this paper a collection of comparative examples using animal and human bones combined with synthetic apatite heat-treated at selected temperatures. The trend of CI was inspected in order to identify advantages and limitations of the use of the FT-IR spectroscopic technique in the study of burned bones.
2. Material and Methods
The human bones fragments and teeth employed in this study were kindly made available from the Universitat Autonoma de Barcelona (Spain). The cremated human teeth originate from the Necropolis of Monte Sirai (Carbonia, Italy). The pig bone specimens were kindly made available from the Department of Animal Biology, University of Sassari (Italy). Synthetic powder hydroxylapatite was synthesized by Aldrich Chemistry®.
The samples were heat-treated in air using a NEY muffle furnace at selected temperatures (500-700-900-1100°C for 10 and 40 minutes), using a rate of 20°C/min both for heating and for cooling the bone specimens.
FT-IR spectra were collected in ATR mode with a Bruker Alpha Platinum-ATR interferometer in terms of absorbance versus wavenumber ν in the range 370–4000 cm−1, with a resolution of 4 cm−1. Each spectrum was obtained by averaging 256 interferograms. The loose powder was dispersed inside a hole cavity of spheroidal shape with its surface aligned to the plate defining it.
The crystallinity index adopted here is the same as that used in the majority of archaeological and forensic applications. The absorption bands at 605 and 565 cm−1 were used following baseline correction, and the heights of these absorptions peaks were summed and then divided by the height of the minimum between them [30].
The bone samples were analyzed with a Bruker M4 Tornado μ-XRF spectrometer using a Rh X-ray source model MCBM 50–0.6 B working at 50 kV and 600 μA under vacuum (20 mbar) and using an Al filter 12.5 μm thick. In order to check the macroscopic chemical homogeneity, a series of 20 spectra were collected for each bone specimen. Each spectrum was accumulated for 600 s.
The XRD patterns were collected using Bruker D2 Phaser instrument working at a power of 30 kV and 10 mA in the Bragg-Brentano vertical alignment with a Cu-Ka tube emission (λ = 1.5418 Å).
The width of divergent and antiscatter slits was 1 mm (0.61°); primary and secondary axial Soller slits of 2.5° were also mounted with a linear detector LYNXEYE with 5° opening and a monochromatisation by Ni foil for the Kb radiation. The powder patterns were collected in the angular range 9°–140° in 2θ with a step size of 0.05°. The collection time of each pattern was pursued for 47 min. Our sample holder for XRD analysis is a circular cavity of 25 mm in diameter and 2 mm in depth, containing about 190 mg of powder bone.
Digitized diagrams were initially subjected to preprocessing for qualitative phase recognition according to the programs Highscore® and Match® and then analyzed quantitatively according to the Rietveld method [31], using the programme MAUD [32]. It is worth noting that one stringent requirement of any Rietveld program needs the correct loading of the crystal structure solution of substances not only concerning space group and lattice parameters but also including atomic location of the asymmetric unit [33].
3. Results and Discussion
In Figure 1, we report a conventional behavior of the FT-IR spectra collected in ATR mode as a function of reported temperature values (500, 700, 900, and 1100°C, for 10 minutes) for a human bone.
The ATR transmittance spectrum of a human unburned bone (bottom pattern) and that for the same specimen treated at the 500–1100°C temperature range. It is possible to appreciate a whole conventional evolution of bands as discussed in the text.
Summarizing briefly, the v4(PO4) and v3(PO4) bands occur in the 500–700 and 850–1200 cm−1 range, respectively. The series of bands in the range 1300–1800 cm−1, particularly those at 1417 and 1660 cm−1, are attributed to the presence of carbonate groups in bone material and to the organic genetic components, respectively, and can be used as a means for quantitative evaluation of their presence during drying [18, 34].
Our spectra evolution in such range confirms the usefulness and convenience of the proposed approach. We can also note increasing sharpening of the v3 and v4 bands attributed to phosphate groups. In particular, the v4 bands are further used as a means to study the CI evolution through numerical evaluation of the splitting factor SF in the pertinent range selected as a function of temperature and reported in Figure 2.
The v4(PO4) bands are also magnified in the frequency range where the CI crystallinity index or SF splitting factor are worked out numerically and their figures reported.
On this clear evidence, the calibration of the CI as a function of temperature has been reversed in order to estimate the temperature to which a bone specimen was subjected after a fire event [18–20].
It is obvious that the reliability of such results depends on the validity of assumptions involved in the study underway and strictly maintained by the sample under investigation. In particular, the infrared spectroscopy is sensible to the vibrations modes around selected atomic species (or molecular groups) in a solid, crystalline matrix. It is expected that such matrix when subjected to thermal treatment enforces its crystalline properties, that is, its degree of (3D) spatial organization in the course of a thermal treatment. This may occur in at least two different but concomitant ways: (i) crystal growth and (ii) elimination of imperfections from the regular lattice. In both cases, it is implicitly assumed that the main parameters governing the crystal symmetry (i.e., the symmetry operation, i.e., the space group assumed by the crystal) are not changing. Whether this occurs or not can be inspected clearly by X-ray diffraction.
Figure 3 shows the behavior of the ATR-IR spectra of human teeth as a function of reported temperature values (500, 700, 900, and 1100°C, for 40 minutes). Tooth enamel is another bioapatite product whose crystallinity study versus temperature could be addressed by ATR similar to human bones. Making reference to the range 1300–1800 cm−1, we may note better the carbonate bands (and their progressive disappearance) rather than those of the genetic material, here less evident.
The spectra evolution as a function of temperature treatment for a human tooth shows an unconventional behavior for the v4(PO4) band in terms of crystallinity index values. We can also note an additional peak which appears at ca. 1123 cm−1 as indicated by arrows.
Of course these bands are disappearing in the high-temperature spectra. If we follow simultaneously the v4 band evolution we may envisage a complex progression of signals (see Figure 4).
Magnification of the v4 band evolution; we may envisage a complex progression of signals. In this case, the values of SF do not present an increasing monotonic trend with temperature but remain nearly constant around 3.3-3.4. Note the shoulder which appears at about 547 cm−1 attributable to β-TCP phase.
In this case the values of SF do not present an increasing monotonic trend with temperature but remain nearly constant around 3.3-3.4.
As a matter of fact, in the temperature range 700–1100°C from the XRD pattern we were able to recognize the presence of β-TCP phase. On account of the new system created, the IR bands of β-TCP are expected to overlap with the bands of bioapatite. An additional peak at ca. 1123 cm−1 (see Figure 3) and the shoulder which appears at about 547 cm−1 (see Figure 4) as indicated by arrows are attributable to β-TCP.
To this regard, Figure 5 shows ATR-IR curves in correspondence with the v4(PO4) band for the transformation behavior of synthetic hydroxylapatite as a function of the indicated temperatures. Although the curve of unburned synthetic hydroxylapatite shows features different from untreated bioapatite, we may notice that, from 700 up to 1100°C, the high temperature bands with new components are heavily affected with respect to their original shape to the point of making any SF determination useless.
The ATR experiment involving synthetic hydroxylapatite displays the emergency of high-temperature features sensibly affecting the conventional band shape and sharpening, to the point of making any CI determination useless.
Figures 6, 7, and 8 refer to the changes of the v4 band shape due to the presence of β-TCP at various levels in three different specimens, all of them subjected to high temperature heat treatment, supplemented with XRD patterns and corresponding Rietveld fit.
A detailed comparison of different FT-IR curves collected for three different bioapatite specimens with the correspondent XRD patterns and relevant Rietveld phase evaluation. The distortions of ATR curves with respect to the conventional expected behavior are strictly related to the amount of β-TCP phase which was stimulated by the high-temperature treatment as it clearly emerges from XRD analyses.
A detailed comparison of different FT-IR curves collected for three different bioapatite specimens with the correspondent XRD patterns and relevant Rietveld phase evaluation. The distortions of ATR curves with respect to the conventional expected behavior are strictly related to the amount of β-TCP phase which was stimulated by the high-temperature treatment as it clearly emerges from XRD analyses.
A detailed comparison of different FT-IR curves collected for three different bioapatite specimens with the correspondent XRD patterns and relevant Rietveld phase evaluation. The distortions of ATR curves with respect to the conventional expected behavior are strictly related to the amount of β-TCP phase which was stimulated by the high-temperature treatment as it clearly emerges from XRD analyses.
Figure 6(a) shows a conventional pattern of a cremated human tooth from an archaeological cremation. The burning temperature reached during the process is unknown. Nevertheless, the value of SF (5.68) permits estimating roughly the temperature [18–20]. Note that the peak at 562 cm−1 is of intensity higher than that of the peak at 600 cm−1. The XRD phase analysis of Figure 6(b) shows that in addition to the predominating presence of bioapatite (red curve) there is a weak appearance (11% wt.) of the β-TCP phase (blue curve). Accordingly, the bar sequences at the bottom mark the expected position of peaks for the indicated phases. The curve below represents the residuals, that is, the difference between the square root of calculated and experimental intensities, respectively.
Figure 7(a) shows a pig bone which was treated at 1100°C in a muffle furnace for 10 minutes. With respect to the previous case, we may notice a substantial change of the band shape. In addition, the peaks at 568 cm−1 and 601 cm−1, respectively, show approximately the same height. Also note that the prominent shoulder previously indicated by the arrow in Figure 4 here is missing. According to the Rietveld fit of the XRD pattern (data points), this specimen had developed 24% of β-TCP and 86% of bioapatite (see Figure 7(b)).
Figure 8(a) represents an extreme case, in which a human tooth was treated in a furnace at 1100°C for 40 minutes. In this case, the relative intensities of the peaks at 569 and 603 cm−1, respectively, are reversed with respect to the curve recorded for the specimen shown in Figure 6(a).
Analysis of the correspondent XRD pattern has established the presence of 70% β-TCP phase for such specimen (see Figure 8(b)). Refined lattice parameters turned out to be 10.37 and 37.23 Å to compare with the values of a = 10.42 and 37.42 Å, respectively, for pure commercial β-TCP (synthesized by Aldrich Chemistry®).
The appearance of β-TCP from human bones seems difficult to account for [35] and has been related to the environmental pH and/or to presence of magnesium ions which may substitute for calcium. The transformation process involves multiple intermediates, the stability of which depends on the cation (Ca and Mg) activities and the solution pH. However, in our studies of biomaterials such as bones and teeth, we never observed the β-TCP phase nor the clear presence of magnesium ions from XRF spectroscopy.
As is shown in Figure 9, the X-ray fluorescence spectra did not show evaluable peaks attributed to magnesium (1.25 keV) for a list of specimens where high-temperature formation of β-TCP was reported. As is also seen in Figure 6, there are other chemical elements such as chlorine, sulphur, and perhaps aluminium that may be related with the observed transformation. A high-temperature treatment seems to be the necessary requisite in order to observe conversion of bioapatite to β-TCP [28].
The XRF spectra analysis for bones and tooth where we have observed formation of β-TCP after a high temperature treatment. The peak of magnesium expected at 1.25 keV appears to be totally absent for all spectra. This cast some doubts about the presumed role of Mg ions in stabilizing the β-TCP phase. Nevertheless there are other weak peaks from other elements (Al, S, and Cl) whose role should be inspected.
In fact, Elliott [36] has suggested for bioapatite a general chemical equation of the type A5(BO4)3(X), where A = Ca2+ or Mg2+ ions, B = P or S, and X = F−, OH−, or 1/2CO32-.
When A = Ca2+, B = P(V), and X = OH−, we meet the chemical equation of synthetic apatite transforming to pure β-TCP:(1)2Ca5PO43OH⟶3Ca3PO42+CaO+H2OOf course in such high temperature reaction, gaseous water is supposed to be evolved, which may account for sporadic observations of teeth eruption and explosion during heat-treatment, while solid CaO can rehydrate to Ca(OH)2 (portlandite) after cooling down at room temperature.
Unfortunately, there is no well-defined temperature for the above transformation reaction to occur, the main reasons being that, apart from pH, bioapatite may be stabilized unpredictably also by grain boundaries, defects, and inclusion of various chemical species difficult to identify and evaluate properly.
The appearance of β-TCP phase from bones appears to be sporadic and seems to occur at temperatures around 1100°C [28]. Conversely for teeth, we have observed a more systematic occurrence of β-TCP at temperatures as low as 750°C.
Figure 10 shows the sequence of Rietveld fit for the human teeth which were thermally treated in a furnace at 700, 750, 900, and 1100°C for 10 minutes at a rate of 20°C/min and then cooling in air. The patterns show the appearance of the β-TCP phase (blue full line) occurring at a temperature as low as 750°C and following peak sharpening.
The series of XRD patterns for a tooth heat-treated at 700–1100°C temperature range suggest that the occurrence of β-TCP is observable by heating the specimen in a furnace as low as 750°C for 10 minutes at a rate of 20°C/min and then cooling in air.
A β-TCP amount of ca 5% from an otherwise bioapatite matrix can be ascertained from the XRD patterns in the 2θ range 26–37 using our experimental conditions paying attention to its most intense peak (0,2,10) occurring at 2θ = 31.18° in reason of their lattice parameters a = 10.37 and c = 37.21 Å, respectively.
As can be seen in Figure 7, such shoulder emerges more clearly with other diagnostic peaks of β-TCP at higher temperatures of treatment, because of sharpening of the peaks related to the increase of the average crystallite size for both bioapatite and β-TCP phases and/or release of internal strain.
Two other points are worth noting from Rietveld analysis:
The amount of β-TCP separated at temperatures as high as 1100°C remains approximately around 14%.
The lattice parameters of β-TCP remain essentially unchanged during the thermal process and the values are slightly below those determined in the literature of the “supposed magnesium stabilized” phase. Comparison with the XRD quantitative data reported in Figure 6(b) suggest that the holding time at a final temperature may help the kinetics of decomposition, at parity of temperature rate increase selected. Finally, we would like to add that the unknown phase reported from thermal treatments of dental tissue and synthetic hydroxylapatite in the synchrotron radiation patterns of Sui et al. [37] (λ is not reported but calculable as ca. 0.69 Å) is very likely the β-TCP phase.
We should note that such presence of β-TCP is hardly distinct in the v4 band of phosphates in the ATR-IR spectrum because of their relative importance in comparison to bioapatite. Nevertheless, the P–O bond length distribution of phosphate in bioapatite [38] is certainly different from phosphate bond length distribution in β-TCP [39].
4. Conclusions
The use of ATR-IR spectroscopy in the study of burned bones using the v4 band of phosphates in the range 500–700 cm−1 may deserve special care in the case of occurrence of β-TCP (or equivalently other phosphate phases that in principle can react after chemical or physical treatments applied to the bioapatite). This is because the range of frequencies where the CI of bioapatite is determined turns out to be heavily affected by other bands of similar phosphate groups like those allocated in the β-TCP crystal structure. This emphasize the use of XRD as a valuable tool for supplementing the studies by ATR-IR on human bones and teeth to assess or reject occurrence of high-temperature fires both in forensic and in archaeological bone sample remains. Even when the shape of the v4 band is different from the expected profile, the comparison between ATR-IR and XRD data may contribute to reconstruct the firing processes to which the bones were subjected.
For example, the presence of β-TCP in human teeth as revealed by XRD may be additional evidence of a thermal treatment equivalent to at least 750°C. Normally the CI values from ATR-IR spectra conducted for estimating the heat treatment are correlated just to the XRD peak sharpening from the apatite phase, throughout a line broadening analysis. On the other hand, also analysis of the v4 band of phosphates deviating from the conventional shape so far examined can be interpreted more rigorously.
The reason why β-TCP appears at relatively moderate temperature in teeth examined here in comparison to bones still remains obscure, and further studies need to be addressed acquiring information about chemical species and following the crystal structure parameters.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
Acknowledgments
The authors thank Professor Marco Zedda (Department of Animal Biology, University of Sassari, Italy) and Dr. Michele Guirguis (Department of History, University of Sassari, Italy) for supplying some osseous materials employed in this study and Professor Plinio Innocenzi, Dr. Luca Malfatti, and Dr. Barbara Lasio [Sciences and Nanotechnology Laboratory (LMNT), University of Sassari, Italy]. This work is supported by Autonomous Region of Sardinia, with the project titled “Archaeometric and Physico-Chemical Investigation Using a Multi-Technique Approach on Archaeological, Anthropological and Paleontological Materials from the Mediterranean Area and Sardinia.”
MarchR. J.Bar-JosefO.Cavalli-SforzaL.MarchR. J.PipernoL'étude des structures de combustion préhistoriques: une approche interdisciplinaireXIII International Congress of Prehistoric and protohistoric SciencesSeptember 1996Forlì, Italy251275Colloquia 5 The Lower and Middle Paleolithic Colloquium IXOwsleyD. W.Identification of the fragmentary, burned remains of two U.S. journalists seven years after their disappearance in Guatemala1993386137213822-s2.0-0027432832MurrayK. A.RoseJ. C.The analysis of cremains: a case study involving the inappropriate disposal of mortuary remains1993381981032-s2.0-0027463651HoldenJ. L.ClementJ. G.PhakeyP. P.Age and temperature related changes to the ultrastructure and composition of human bone mineral1995109140014092-s2.0-0029161578KennedyK. A. R.The wrong urn: commingling of cremains in mortuary practices19964146896922-s2.0-0029992738CattaneoC.DiMartinoS.ScaliS.CraigO. E.GrandiM.SokolR. J.Determining the human origin of fragments of burnt bone: a comparative study of histological, immunological and DNA techniques19991022-318119110.1016/s0379-0738(99)00059-62-s2.0-0033061088ShipmanP.FosterG.SchoeningerM.Burnt bones and teeth: an experimental study of color, morphology, crystal structure and shrinkage198411430732510.1016/0305-4403(84)90013-X2-s2.0-0021605770NeweselyH.GrupeG.HerrmannB.Chemical stability of hydroxyapatite under different conditions1988Berlin, GermanySpringer116Proceedings in Life Sciences10.1007/978-3-642-73297-3_1StinerM. C.KuhnS. L.WeinerS.Bar-YosefO.Differential burning, recrystallization, and fragmentation of archaeological bone199522222323710.1006/jasc.1995.00242-s2.0-0000157557RavaglioliA.KrajewskiA.CelottiG. C.PiancastelliA.BacchiniB.MontanariL.ZamaG.PiombiL.Mineral evolution of bone199617661762210.1016/0142-9612(96)88712-62-s2.0-0030111137RogersK. D.DanielsP.An X-ray diffraction study of the effects of heat treatment on bone mineral microstructure200223122577258510.1016/S0142-9612(01)00395-72-s2.0-0036010019PigaG.MalgosaA.ThompsonT. J. U.EnzoS.A new calibration of the XRD technique for the study of archaeological burned human remains20083582171217810.1016/j.jas.2008.02.0032-s2.0-44449094472PigaG.ThompsonT. J. U.MalgosaA.EnzoS.The potential of X-ray diffraction in the analysis of burned remains from forensic contexts200954353453910.1111/j.1556-4029.2009.01037.x2-s2.0-65349162189PigaG.2012Biblioteca de Comunicación y Hemeroteca General, Universitat Autónoma de Barcelonahttp://www.educacion.es/teseo/mostrarRef.do?ref=996840KoonH. E. C.NicholsonR. A.CollinsM. J.A practical approach to the identification of low temperature heated bone using TEM200330111393139910.1016/s0305-4403(03)00034-72-s2.0-0141890755MunroL. E.LongstaffeF. J.WhiteC. D.Burning and boiling of modern deer bone: effects on crystallinity and oxygen isotope composition of bioapatite phosphate20072491-29010210.1016/j.palaeo.2007.01.0112-s2.0-34248181499OlsenJ.HeinemeierJ.BennikeP.KrauseC.Margrethe HornstrupK.ThraneH.Characterisation and blind testing of radiocarbon dating of cremated bone200835379180010.1016/j.jas.2007.06.0112-s2.0-38549103671ThompsonT. J. U.GauthierM.IslamM.The application of a new method of Fourier Transform Infrared Spectroscopy to the analysis of burned bone200936391091410.1016/j.jas.2008.11.0132-s2.0-58149293411ThompsonT. J. U.IslamM.PiduruK.MarcelA.An investigation into the internal and external variables acting on crystallinity index using Fourier Transform Infrared Spectroscopy on unaltered and burned bone20112991-216817410.1016/j.palaeo.2010.10.0442-s2.0-78650609678PigaG.GuirguisM.BartoloniP.MalgosaA.EnzoS.A funerary rite study of the Phoenician-Punic necropolis of Mount Sirai (Sardinia, Italy)201020214415710.1002/oa.1012PigaG.MalgosaA.ThompsonT. J. U.GuirguisM.EnzoS.A unique case of prone position in the primary cremation Tomb 252 of Monte Sirai necropolis (Carbonia, Sardinia, Italy)201525214615910.1002/oa.22702-s2.0-84866039242SquiresK. E.ThompsonT. J. U.IslamM.ChamberlainA.The application of histomorphometry and Fourier Transform Infrared Spectroscopy to the analysis of early Anglo-Saxon burned bone20113892399240910.1016/j.jas.2011.04.0252-s2.0-79960107895PigaG.Hernández-GaschJ. H.MalgosaA.GanaduM. L.EnzoS.Cremation practices coexisting at the S'Illot des Porros Necropolis during the Second Iron Age in the Balearic Islands (Spain)201061644045210.1016/j.jchb.2010.09.0032-s2.0-78449239202ChakrabortyS.BagS.PalS.MukherjeeA. K.Structural and microstructural characterization of bioapatites and synthetic hydroxyapatite using X-ray powder diffraction and Fourier transform infrared techniques200639338539010.1107/s00218898060103512-s2.0-33744456483PigaG.BrunettiA.LasioB.EnzoS.MalgosaA.XRF investigation on skeletal remains from King Peter III of Aragon (1239–1285 A.D) and Queen Blanche of Anjou (1280–1310 A.D)2014114364765310.1007/s00339-014-8272-zWeinerS.GoldbergP.Bar-YosefO.Bone preservation in Kebara Cave, Israel using on-site Fourier transform infrared spectrometry199320661362710.1006/jasc.1993.10372-s2.0-0000438563WrightL. E.SchwarczH. P.Infrared and isotopic evidence for diagenesis of bone apatite at Dos Pilas, Guatemala: palaeodietary implications199623693994410.1006/jasc.1996.00872-s2.0-0030428032PigaG.SolinasG.ThompsonT. J. U.BrunettiA.MalgosaA.EnzoS.Is X-ray diffraction able to distinguish between animal and human bones?201340177878510.1016/j.jas.2012.07.0042-s2.0-84867911834ThompsonT. J. U.IslamM.BonniereM.A new statistical approach for determining the crystallinity of heat-altered bone mineral from FTIR spectra201340141642210.1016/j.jas.2012.07.0082-s2.0-84867910103WeinerS.Bar-YosefO.States of preservation of bones from prehistoric sites in the Near East: a survey199017218719610.1016/0305-4403(90)90058-d2-s2.0-0025206192RietveldH. M.Line profiles of neutron powder-diffraction peaks for structure refinement196722115115210.1107/S0365110X67000234LutterottiL.Total pattern fitting for the combined size-strain-stress-texture determination in thin film diffraction20102683-433434010.1016/j.nimb.2009.09.0532-s2.0-75949101985GraulisS.ChateignerD.DownsR. T.YokochiA. F. T.QuirósM.LutterottiL.ManakovaE.ButkusJ.MoeckP.Le BailA.Crystallography Open Database—an open-access collection of crystal structures200942472672910.1107/s00218898090166902-s2.0-67651160601LebonM.ReicheI.FröhlichF.BahainJ.-J.FalguèresC.Characterization of archaeological burnt bones: contribution of a new analytical protocol based on derivative FTIR spectroscopy and curve fitting of the v1v3 PO4 domain200839271479148810.1007/s00216-008-2469-yJangH. L.LeeH. K.JinK.AhnH.-Y.LeeH.-E.NamK. T.Phase transformation from hydroxyapatite to the secondary bone mineral, whitlockite2015371342134910.1039/c4tb01793eElliottJ. C.1994Amsterdam, The NetherlandsElsevier Science & TechnologySuiT.SandholzerM. A.LuntA. J. G.BaimpasN.SmithA.LandiniG.KorsunskyA. M.In situ X-ray scattering evaluation of heatinduced ultrastructural changes in dental tissues and synthetic hydroxyapatite201411952013092810.1098/rsif.2013.0928WilsonR. M.ElliottJ. C.DowkerS. E. P.Rietveld refinement of the crystallographic structure of human dental enamel apatites1999849140614142-s2.0-0033402315YashimaM.SakaiA.KamiyamaT.HoshikawaA.Crystal structure analysis of β-tricalcium phosphate Ca3(PO4)2 by neutron powder diffraction2003175227227710.1016/s0022-4596(03)00279-22-s2.0-0141920742