Fuzzy Human Reliability Analysis : Applications and Contributions Review

The applications and contributions of fuzzy set theory to human reliability analysis (HRA) are reassessed.Themain contribution of fuzzymathematics relies on its ability to represent vague information.ManyHRA authors havemade contributions developing new models, introducing fuzzy quantification methodologies. Conversely, others have drawn on fuzzy techniques or methodologies for quantifying already existing models. Fuzzy contributions improve HRA in five main aspects: (1) uncertainty treatment, (2) expert judgment data treatment, (3) fuzzy fault trees, (4) performance shaping factors, and (5) human behaviour model. Finally, recent fuzzy applications and new trends in fuzzy HRA are herein discussed.


Introduction
The term "Human Reliability Assessment" (HRA), human reliability evaluation or analysis, was first introduced in 1962 by Munger et al. [1] and can be defined as "the probability that a task or job is successfully completed by an individual in a specific state of operation of the system in a minimum required time (if there is time requirements)" [2].
In the negative sense, "human error" is defined as "the failure probability to execute a given task (or execution of a prohibited task), which may cause equipment damage or disrupt the sequence Operations" [3].
Almost all HRA methods and approaches share the assumption that it is significant to use the concept of "human error," so it is also significant to develop ways to estimate chances of "human error."As a result, numerous studies have been performed to produce data sets or databases to be used as a basis for human error probabilities (HEP) quantification.This view prevails despite serious doubts expressed by HRA scientists and professionals and related disciplines.A general review of HRA [4] notes that many approaches are based on highly questionable assumptions about human behaviour.
The main contribution of fuzzy mathematics is its ability to represent vague information.It has been used to model systems that are difficult to define precisely [5].As a methodology, fuzzy set theory incorporates vagueness and subjectivity.Fuzzy decision-making includes the uncertainties of human behaviour in decision-making.Fuzzy set theory, created by Zadeh in 1965, emerges as a powerful way to quantitatively represent and manipulate imprecise decisionmaking problems [6].Since the vague parameters are treated as imprecise rather than precise values, the process is more powerful and results are more credible.Fuzzy mathematics emerges as a tool to model processes that are too complex for traditional techniques (such as probability theory) and when process information is qualitative, inaccurate, or unclear; for these cases the concept of membership function properly represents this type of knowledge [7].
Fuzzy logic captures an inherent property of most human communications: they are not accurate, concise, perfectly clear, and crisp [8].The meaning of the word (natural language) is diffused because a word can be applied perfectly to some objects or events, clearly excluding others, and can be applied to a certain extent, in part, to other objects or events.Language statements are inherently vague; this fact could be addressed with fuzzy set theory [9].Fuzzy logic resembles the way that humans make decisions and inferences [7].

Advances in Fuzzy Systems
In fuzzy processing there are basically three components [7]: (1) fuzzification, (2) fuzzy inference, and (3) defuzzification.Fuzzification is the process by which the input variables are transformed into fuzzy numbers sets.Fuzzy inference is a set of fuzzy if-then-else rules used to process diffuse inputs and generate fuzzy conclusions; that is, fuzzy inference interprets input vector values and, based on a rules set, generates an output vector.Defuzzification is the process of weighing and averaging out all fuzzy values into a single output signal or decision.
It is easy to see the applicability of this tool for quantifying human reliability.Many HRA authors have made contributions developing new models with fuzzy quantification methodologies or using fuzzy techniques or methodologies for quantifying existing models, for example, fuzzy CREAM [7].In the following sections the main concepts of HRA methodologies and fuzzy applications and contributions made to human reliability are presented.

Human Reliability Assessment Review
The birth of HRA methods was in 1960, but most of the techniques for human factor evaluation, in terms of propensity to fail, have been developed since the mid-80s.HRA techniques or approaches can be basically divided into two categories: first and second generation.Currently, dynamic HRA techniques or methods of the third generation, understood as an evolution of the previous generations [10], are subject to research.
The first-generation methods or quantitative HRA methods were based on statistics.The most important firstgeneration HRA method is THERP (technique for human error-rate prediction) [11], based on event tree analysis.A lot of methods and models in classical HRA theory assume that all probabilities are accurate [12]; that is, each probability involved can be perfectly determined.HEP can be assigned on the basis of operator's task characteristics and then modified by performance shaping factors (PSFs).In first-generation HRA, task characteristics are represented by HEPs; and the context, which is represented by PSF, is considered a minor factor in HEP estimation [12].This generation is concentrated in HRA quantification, in terms of action success/failure, with less attention paid to in-depth causes and reasons for human behaviour.
The integrity of probabilistic information implicates two conditions: (1) all probabilities and probability distributions are well known or determinable; (2) system components are independent; that is, all random variables that describe component reliability behaviour are independent or alternatively dependence is precisely known.
Precise measurements of system reliability can be calculated whenever these two conditions are met.However, reliability evaluations combined with systems and components description may come from various sources.In most practical applications, it is difficult to expect that the first condition is met and, usually, the second condition is violated.
Utkin and Coolen [13] provide an important contribution to the imprecise reliability, discuss a variety of topics, and review the suggested applications of imprecise probabilities in terms of reliability.Modelling human error through probabilistic approaches has shown a limitation in qualitative aspects' quantification of human error and attributes complexity of involved circumstances.Mosleh and Chang [14] indicate the first-generation HRA methods' limitations, enumerate some expectations, and show that methods should be based on human behaviour models.
Among first-generation techniques are Absolute Probability Judgment (APJ), Human Error Assessment and Reduction Technique (HEART), Human Error Justified Data Information (JHEDI), Probabilistic Human Reliability Analysis (PHRA), Action Tree System Operator (OATS), and Success Likelihood Index Method (SLIM).The most popular and effective method is THERP, characterized, as other firstgeneration approaches, by a precise mathematical treatment of probability and error rates.THERP is based on event tree where each branch represents a combination of human activities and their mutual influences and results.
The main features of first-generation methods can be summarized [15] as (1) binary representation of human actions (success/failure); (2) human action phenomenology; (3) low attention in human cognitive actions (lack of a cognitive model); (4) emphasis on quantifying the probability of incorrect human actions; (5) dichotomy between the errors of omission and commission; and (6) indirect treatment of context.
THERP and approaches developed in parallel-as HCR (Human Cognition Reliability) developed by Hannaman, Spurgin, and Lukic in 1985-describe cognitive aspects of operator performance with a cognitive model of human behaviour, known as skill-rule-knowledge (SRK) model [16].This model, based on human behaviour classification, is divided into practical skills, rules, and knowledge-based behaviour, depending on the cognitive level used.Attention and conscious thought that an individual gives to activities decreased from the third to the first level.This model of behaviour fits very well with Reason's human error theory [17]: there are several types of errors, depending on the actions' result carried out with intention or not.Reason distinguished "slips" errors that occur in skill level; "lapses" errors caused by memory failure; and "mistakes" errors made during the action execution.In THERP, however, bad actions are divided into omission and commission errors representing, respectively, failure to carry out necessary operations to achieve the desired result and execution of actions not referred to as concerned task, which keep off the desired result [18].
First-generation HRA methods ignore the cognitive processes that underlie human behaviour, in fact, they have a cognitive model without realism and they are psychologically inadequate.They are often criticized for not considering some factors' impact such as environment, organizational factors and other relevant PSFs, and inadequate treatment of commission errors and expert judgment [14,18,19].Hollnagel [18] noted that "all inadequacies of previous HRA methods often lead analysts to perform an HEP evaluation deliberately high and with greater uncertainty limits to compensate, at least in part, these problems" [18].This is clearly not a desirable solution.
In the early 1990s, the need for improved HRA methods generated a number of important research and development activities worldwide.These efforts led to great advances in first-generation methods and the birth of new techniques, identified as second generation.These HRA methods were, at first, vague and unclear.While first-generation HRA methods are primarily behavioural approaches, second-generation HRA methods aspire to be conceptual [14].
The gap between generations is evident in the abandonment of quantitative approach in probabilistic risk analysis (PRA) or probabilistic safety assessment (PSA) in favour of greater attention to qualitative assessment of human error.The focus was on cognitive aspects of human beings, causes of errors rather than their frequency, study of factors interaction that increases error probability, and PSFs interdependence.
The second-generation HRA methods (such as CREAM "Cognitive Reliability and Error Analysis Method" or ATHEANA "A Technique for Human Event Analysis") are based on human behaviour models.This generation of methods emphasizes the qualitative characterization of human error, describing cognitive roots and human cognitive functions involved.
Clearly, any attempt to understand human behaviour should include the role of human cognition, defined as the act or process of knowing that includes awareness and human operator judge.From the HRA analyst's perspective, the immediate solution considering human cognition was the introduction of a new error category: "cognitive error," which is defined as both the lack of an activity predominantly cognitive and the inferred cause of activity fails.For example, CREAM, developed by Hollnagel in 1993, maintains the division between causes and logical consequences of human error.Causes of misconduct (genotypes) are the reasons that determine the occurrence of certain behaviours and effects (phenotypes) are represented by incorrect forms of cognition and inappropriate actions.
Cognitive models have been developed to represent the logical-rational process of human beings and include dependence on personal factors (such as stress, incompetence, etc.), situation conditions (normal system conditions, abnormal conditions, or emergencies), and human-machine interface models, which reflect the control system process [20].In this perspective, human operator must be seen as a part of an integrated system (its acronym in English is MTO: "Man-Technology-Organization"), that is, a team of operators (men) working together to achieve the same goal, which is involved in the mechanical process (technology) within an organization and company management (organization), and, together, representing the resources available.Cognitive models used in second generation are based on the assumption that human behaviour is governed by two basic principles: cyclical nature of human cognition and cognitive processes dependence with context and work environment.
Another difference between generations refers to the choice and use of PSF.None of the first HRA approaches seeks to explain how PSFs exert their effect on performance and, in addition, PSFs-such as management methods and attitudes, organizational factors, cultural differences, and irrational behaviour-are not adequately addressed.PSFs in first generation are mainly derived focusing on environmental impact, while PSFs in second generation were obtained by focusing on cognitive effects [21].PSFs of both generations were revised and collected in a single taxonomy of performance factors [22].
Most important second-generation methods are A Technique for Human Event Analysis (ATHEANA), Cognitive Environmental Simulation (CES), Connectionism Assessment of Human Reliability (CAHR), and Méthode d'Evaluation Realisation des Missions Opérateur pour la Sûreté (MERMOS-assessment method of operational security missions).

Applications and Contributions of Fuzzy
Mathematics to Human Reliability 3.1.The Uncertainty Problem: Fuzzy Reliability.One of the main contributions of fuzzy mathematics to human reliability is to capture the phenomenon of uncertainty, associated with information sources and the intrinsic randomness of man-machine systems.As Zio indicates [23], a fundamental problem in reliability analysis is the uncertainty of failure occurrence and its consequences.Risk analyses have three types of treatments of uncertainty according to degree of information availability [24]: (1) historical information available and sufficient (modelled through simple probabilistic frequencies); (2) information available but insufficient (modelled by statistical theories as Bayesian networks); and (3) information not available (modelled through expert judgment).Uncertainty is a function of incompleteness and fuzziness that can be modelled using membership functions.Contributing factors to uncertainty are four [24]: (1) inadequate statistical analysis methods (for statistical parameters); (2) lack of sufficient information for proper statistical analysis (for statistical models); (3) complexities of working conditions and health (for expert judgment); and (4) the level of education and experience (also for expert judgment).
As indicated by Konstandinidou et al. [7] it is necessary to build a human reliability model that can incorporate subjective information and, therefore, an adequate mathematical treatment for this type of information.As Sheridan says [8] operators' knowledge (indispensable source of information for task analysis) of system variables and their interrelationships is fuzzy.
Natural language introduces uncertainty for its vagueness and imprecision.For example, the principle underlying the design of all systems is that if the system is designed to withstand the worst accident scenarios then it can be resistant to any credible accident; refer to "worst case scenario" which implies subjectivity and arbitrariness, leading to contemplation of highly improbable scenarios [23].A fuzzy treatment of this linguistic term should address that problem.
Equally, conceptual constructs such as "situational awareness" (SA), criticized for its vagueness and imprecision, are modelled by Naderpour et al. [25] using Bayesian networks and fuzzy inference system.Situational awareness is a crucial factor to improve performance and reduce human error; however, few methods assess SA because it is difficult to model and evaluate.The construct "mental model," identified as a folk model as well as situational awareness [26], can take two forms: the first is qualitative (describing the interrelationships between a set of objects and experienced events); the second is a quantitative cause and effect relationship (this model addresses questions like "what happens if").The second type of mental model can be represented by fuzzy rules [8].
HEROS model [9] is an expert system where vagueness of verbal statements is modelled with linguistic variables represented by fuzzy numbers and fuzzy intervals.The input of "expert system" is PSFs evaluation in natural language and the output, also in natural language, is a human error characterization (very unlikely, unlikely, likely, very likely, and very likely).
Some authors speak of "fuzzy reliability" to incorporate this issue [27,28].In fuzzy reliability, probability and binary states are replaced with possibility and fuzzy states.Error possibility provides a more detailed description than error probability in probabilistic reliability [27].
Uncertainty about stress and intensity of components in fuzzy reliability can be classified as follows [28]: (1) random stress and fuzzy intensity, (2) fuzzy stress and random intensity, and (3) fuzzy stress and fuzzy intensity.For an electronic component, for example, stress can be operating temperature or voltage; intensity can be the maximum temperature or voltage that component supports.In practice, variable's stress or intensity is difficult to compute, so they are fuzzy variables.In fuzzy reliability each component is taken as a fuzzy variable.
Other types of uncertainty treated with fuzzy logic arise from human failure event and human actions dependencies.Methods developed to date do not provide task dependencies [29]; one of the desirable attributes of an improved model is the ability to cover human failure events, their dependencies, and recoveries [30].This source of uncertainty is approached in two main ways: by fuzzy expert judgment elicitation [31,32] or HEP modifications by dependencies considerations [33,34].Recent third-generation HRA models, or dynamic HRA, include simulation to address task dependency [35].

Expert Judgment Data Treatment.
Applying HRA methodologies involves numerous judgments expressed in natural language; for example, THERP's degree of stress, operating instructions, and training quality have to be qualified verbally; or in HRC, they are based solely on verbal evaluations [9].
One of the great problems of extracting information from an expert is the bias degree of people's judgments about variables values [8].To address this problem, three types of calibration are used: (1) people's biases are quite stable so they will be the same for the same or similar situations in the same or similar variables, so they can be treated with probability densities; (2) human judgment includes not only the best guess but the degree of confidence in self-response; and (3) judgment can be compared with actual events.
In countries where objective probabilistic risk information is extremely rare or inadequate, using subjective judgment based on experts' experience is inevitable [24].
In these cases fuzzy theories are useful; fuzzy sets are used to handle ambiguity in probabilistic modelling of subjective judgments.For example, fuzzy theory is applied to convert expert opinion in natural language to obtain numerical values of risk factors [36].
FORAS risk assessment model (Flight Operations Risk Assessment System) [37] is a fuzzy expert system (FES), based on aviation experts knowledge (variables can be linguistic values).The risk model is a hierarchical decomposition of risk contributing factors, whose interrelations are represented by fuzzy sets rules.This decomposition allows identifying major contribution elements.FES is ideal for environments, such as aviation safety, where knowledge is highly subjective and empirical, resulting from years of experience, accident investigations, simulations, and psychological studies.
The vast majority of fuzzy sets applications in HRA use fuzzy logic ability to formally represent qualitative and ambiguous statements, without including a FES to obtain expert knowledge.According to Zio et al. [31], the only model that obtains expert knowledge through fuzzy set theory was published by Huang et al. [38].

Binary Logic and Fuzzy
Logic: Fuzzy Fault Trees.Errors are modelled according to a binary logic of success/failure, so other error modes are not explicitly identified [39].However, human reliability analysis should not be limited to binary treatment of human actions (correct or failed actions) typically used in fault trees.Many actions may not be included in that binary logic, for example, initiating events [15].Binary fault trees do not allow context representation nor individuals' representation, their interrelationships, and system dynamics [40].
In Fuzzy Causal Model (FCM) [36], accident mechanism is explained by directed acyclic diagrams showing the logical relationships of a variety of events.In contrast to traditional failure trees, and even Bayesian networks, not only the occurrence events probability range but also the incidence relations and influence degree between different events are represented by triangular fuzzy numbers (, , ).The causal fuzzy model has two interesting contributions: (1) "relaxed" logical operators, that is, AND operator in which, given all the true input variables, there is a low probability of nonoccurrence of the output variable, and OR operator in which, given all the negative input variables, there is a low possibility of occurrence of the output variable; (2) fuzzy conditional operators, that is, output variable occurrence probability given the input variable, which can be a fuzzy value.
Celik and Cebi [41] used Human Factors Analysis and Classification System (HFACS) theory integrated with Fuzzy Analytical Hierarchy Process (FAHP) to quantitatively evaluate human errors contribution in shipping accidents, trying to ensure accident reports consistency in order to clearly identify causes of accidents.

Performance Shaping Factors.
Most of human reliability theories are based on implicit functions relating PSFs with error probabilities; however, they fail to consider variability, uncertainty, and incomplete knowledge that characterize many domains and experts [42].
Bertolini [43] uses "fuzzy cognitive maps" to rank PSFs importance.Using an expert group and by Delphi technique, Bertolini establishes the relationships between 34 PSFs, setting the "fuzzy cognitive map."Thus, he determines that "noise" factor is the main factor that decreases human reliability.This is an extremely interesting and practical finding, especially in systems design, but questionable for its use in absolute terms and in quantifying human reliability.
In the model developed by Li et al. [44], all performance factors, such as "working environment," have three states (incompatible, compatible, and advantageous); each state has an occurrence probability (which is estimated by expert judgment and not through historical data) according to a triangular fuzzy membership function, where the peak is the most likely value and extreme values are confidence interval limits.
HEROS model [9] uses a fuzzy inference system (expert system) combining fuzzy values of each PSF; then these values are associated to calculate human error possibility.
Kim and Bishu [45] use fuzzy logic in parameters modelling (age, experience in and out of the control room, and education) that influences the relationship between response time and misdiagnosis probability in an emergency situation.Despite differences found in laboratory observations and field observations, an approximate error value resulting from fuzzy regression models plays an important role given the difficult data acquisition in real cases.

Human Behaviour Model.
Artificial intelligence authors use fuzzy logic to simulate and emulate human behaviour and cognition.Many authors, in order to improve HRA methodologies, introduce the role of human cognition [15], and they have used this knowledge to be incorporated in human reliability analysis modelling human behaviour or human information processing with fuzzy logic.
As an example, SAMPLE model (Situation Awareness Model for Pilot-in-the-Loop Evaluation) [46] can be cited.Created by Charles River Analytics and supported by Wright-Patterson Air Force Base, SAMPLE is an "information processing model" in dynamic systems; it has an agent based architecture that represents human entities (fighter pilots, commercial pilots, air traffic controllers, and dispatchers).It includes fuzzy technologies, Bayesian reasoning, and rulebased expert systems.
Another interesting problem is decision-making modelling.Zadeh [47] proposed the use of fuzzy logic for handling uncertainties associated with human decision-making.Leiden et al. [46] are pioneers in decision-making theory based on recognition (recognition-primed decision-making RPD).According to this theory, good decisions can be reached through the recognition of experience in typical situations and the subsequent identification of the alternative that works.This recognition is modelled applying fuzzy pattern recognition.
The usual assumption in fuzzy logic is that, given a situation, the rule or combination of rules that have greater applicability (membership degree) should dominate the action; in other words, the action attesting a greater membership degree must be chosen [8].Terano and Sugeno [48] used fuzzy logic for multiple targets weighting problem.The decision maker can assign a score   to each of the  objectives and can also judge the relevance   of any combination of the  objectives (taking one at a time, taking in pairs, etc.).For each objectives combination, relevance   is compared with the worst scores for each objective in that combination and the worst of the two is taken.A combination with greater weight is then chosen.

Most Recent Fuzzy Set Contributions and Applications
The applications of fuzzy logic started after Zadeh's publications in 1965 [6], principally in automatic control [49], visual and speech recognition, home electronics, man-machine models interaction, artificial intelligence, and several industrial applications.Mendel and John [50] proposed fuzzy sets type-2 in order to model different levels of uncertainty for different forms of data.According to [51] fuzzy sets type-2 approach appears to be in its infancy.In this section, recent fuzzy applications are compared and fuzzy HRA applications are contextualized.
A bibliometric analysis from 2012 to 2015 was made using the online databases: ISI-Web of Science, ScienceDirect, SpringerLink, Informaworld, Engineering Village, Emerald, and IEEE Xplore.Application of fuzzy set can be classified under three main sets (Figure 1): (1) manufacturing operations and industries, (2) service operations and industries, and (3) information and communication technology (telecommunication network planning, image processing, pattern recognition, information retrieval, and weather forecasting, etc.); and the main subject areas of fuzzy application are computer science, engineering, automatic and control systems, robotics, and mathematics.Principal fuzzy engineering applications [52] are (Figure 2) (a) classification and pattern recognition, (b) fuzzy control systems, (c) fuzzy optimization, (d) fuzzy cognitive mapping, and (e) system identification.In this context, fuzzy HRA publications represent almost 1% of principal fuzzy applications (Figure 1) and 1% of fuzzy engineering applications (Figure 2).
A recent and important line of research is about fuzzy Bayesian network (26% of fuzzy HRA applications from 2012 to 2015); the applications were, for example, PSFs quantification improvement [44], case applications [53][54][55][56], and fuzzy Bayesian CREAM [57].On the other hand, the most popular recent works were about fuzzy CREAM (probably due to the method popularity), however, without a big amount of publications (2%).In terms of membership functions, the most used continue to be triangular functions (56%), followed by Gaussian (26%) and trapezoidal (18%).Only 6 (0) Fuzzy HRA 1% (1) Manufacturing operations and industries 7% (2) Service operations and industries 7% (3) Information and communication technology 85% (<1% of fuzzy HRA applications) articles from 2012 to 2015 mentioned type-2 fuzzy sets, but none of them really apply.Present researches on HRA suggest that "failure arises from systematic and predictable organizational factors at work, not simply erratic behaviours by individuals" [58].This new line focuses on anticipating and preventing failure conditions as a system characteristic instead of considering human operator as a probabilistic failure component.This system capacity is called resilience [59].Resilience engineering redefines the concept of safety: "the ability to succeed under varying conditions" [59].As an emerging line of research, resilience engineering needs improvements, especially in the way of measuring the resilience of organizations.Dekker and Hollnagel [26] indicate that phenomenon or construct explanations should be decomposed or reduced into fundamental elements that suggest possible measures allowing explication's corroboration.The quantification and measurement of abstract and complex construct like "resilience engineering" entails numerous problems, and fuzzy logic should be the adequate mathematical tool for its modelling.Nevertheless, there are no publications on the subject.

Conclusion and Discussion
This review presents the advantages of using fuzzy mathematics to quantify human reliability.Even if they represent less than 1% of the actual fuzzy applications, human reliability analyses prove to be a prosperous and growing field of application of fuzzy techniques.Fuzzy contributions improve HRA in five main aspects: (1) uncertainty treatment, (2) expert judgment data treatment, (3) fuzzy fault trees, (4) performance shaping factors, and (5) human behaviour model.
In the first case, sources of uncertainty and examples of fuzzy treatment were discussed.Ambiguous, qualitative, imprecise, and vague information is modelled with fuzzy sets in many HRA methods.The major advantage of using fuzzy sets is to capture the uncertainty associated with verbal statements, linguistic variables, subjective information, conceptual constructs (as situation awareness or mental models), and task dependencies.In fuzzy reliability, probability and binary states are replaced by possibility and fuzzy states.
Expert judgment is the principal source of information in HRA, for it is very difficult, or even impossible, to develop an HRA method without drawing on expert opinion.Fuzzy sets are used to handle ambiguity in probabilistic modelling of subjective judgments, transforming natural language into numerical values and addressing the bias degree of people's judgments on variable values.Fuzzy expert systems prove to capture expert knowledge in HRA applications.
Another important contribution is fuzzy fault trees including "relaxed" logical operators and fuzzy conditional operators.Fuzzy fault trees allow for simpler representations of the complex nature of human actions and much more flexibility than binary fault trees.
Concerning PSF, there is a wide application of fuzzy techniques ranging from triangular fuzzy numbers to represent PSFs confidence limits to fuzzy cognitive maps to establish PSFs relationships and dependence and determining the main factor that decreases human reliability.Fuzzy sets admit PSFs variability, uncertainty, and incomplete knowledge.
Finally, many HRA methods include artificial intelligence approaches to model human behaviour.Both an agent based architecture that represents human entities with fuzzy technologies, Bayesian reasoning, and rule-based expert systems and a decision-making model based on fuzzy pattern recognition or multiple targets weighting problems are examples of the complexity achieved by fuzzy artificial intelligence methods in HRA applications.Due to these methodologies, great depth and accuracy in modelling human behaviour can be reached.
This paper puts forth the applications and contributions of fuzzy set theory to human reliability modelling.As shown, most of these applications resort to triangular membership functions demonstrating strength, flexibility, and simplicity enough for safety analyses.The inclusion of fuzzy theory type-2 is one vacant area of HRA research.Proposed by Mendel and John as an extension of ordinary fuzzy sets, fuzzy grade or fuzzy sets type-2 may probably decrease the uncertainty in human reliability analyses.However, the exploiting of this theory in human reliability techniques for safety analyses may increase calculation complexity to impractical levels.

Figure 1 :Figure 2 :
Figure 1: Comparison between fuzzy HRA applications and principal fuzzy applications.