Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 2319424, 1 page
https://doi.org/10.1155/2017/2319424

Corrigendum

Corrigendum to “Preparation and Characterization of Amorphous B Powders by Salt-Assisted SHS Technique”

Yujing Ou,1,2 Peiqing La,¹ Dandan Zhu,² and Yalong Zhu²

¹State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals, Lanzhou University of Technology, Lanzhou, Gansu 730050, China
²School of Petrochemical Engineering, Lanzhou University of Technology, Lanzhou, Gansu 730050, China

Correspondence should be addressed to Peiqing La; pqla@lut.cn

Received 21 December 2016; Accepted 5 January 2017; Published 8 February 2017

Copyright © 2017 Yujing Ou et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

In the article titled “Preparation and Characterization of Amorphous B Powders by Salt-Assisted SHS Technique” [1], there was an error in the authors’ affiliations. The correct affiliation list is shown above.

References

Y. Ou, P. La, D. Zhu, and Y. Zhu, “Preparation and characterization of amorphous B powders by salt-assisted SHS technique,” Advances in Materials Science and Engineering, vol. 2015, Article ID 287143, 7 pages, 2015.