Cutting fluid is applied for numerous reasons while machining a workpiece, like increasing tool life, minimizing workpiece thermal deformation, enhancing surface finish, flushing away chips from cutting surface, and so on. Hence, choosing a proper cutting fluid for a specific machining application becomes important for enhanced efficiency and effectiveness of a manufacturing process. Cutting fluid selection is a complex procedure as the decision depends on many complicated interactions, including work material’s machinability, rigorousness of operation, cutting tool material, metallurgical, chemical, and human compatibility, reliability and stability of fluid, and cost. In this paper, a decision making model is developed based on quality function deployment technique with a view to respond to the complex character of cutting fluid selection problem and facilitate judicious selection of cutting fluid from a comprehensive list of available alternatives. In the first example, HD-CUTSOL is recognized as the most suitable cutting fluid for drilling holes in titanium alloy with tungsten carbide tool and in the second example, for performing honing operation on stainless steel alloy with cubic boron nitride tool, CF5 emerges out as the best honing fluid. Implementation of this model would result in cost reduction through decreased manpower requirement, enhanced workforce efficiency, and efficient information exploitation.
There exists an assortment of machining operations for fabrication of finished metal parts/products for various applications across diverse categories of manufacturing industries. An enormous amount of heat is generated during those machining operations due to plastic deformation of the chips produced, friction between the cutting tool and chips, and interaction between the cutting tool and workpiece. The rise in temperature as a result of the generated heat affects both the cutting tool and the workpiece, which in turn leads to several predicaments, like (a) difficulty in handling and controlling dimensional requirements of the workpiece, (b) reduction in hardness of the cutting tool, and (c) formation of built-up edge on the rake face of cutting tool, thereby modifying the geometry of the cutting tool and affecting surface finish of the workpiece. Moreover, it is expected that the machine tools employed for performing the cutting operations should run efficiently, productively, and reliably for substantial period of time. Therefore, cutting fluids are extensively utilized in manufacturing industries to lessen the effect of generated heat on the final product and to avert the abrupt breakdown of machine tools. They have a strong impact on the cutting tool’s life, quality of the finished part/product, and productivity and efficiency of the machining process, when considered as a whole. Thus, cutting fluids play a major role in machining operations.
At earlier days, a machine tool was polished and cooled through application of plain oils, also termed as cutting fluid, on it. Gradually, formation of cutting fluids has become more and more complex with dynamic business environment, global competition, continuously improving technology, and advent of more intricate metal removal processes. At present, they comprise special blends/mixtures of chemical additives, lubricants, and water-based oils to meet the performance and productivity demands of different manufacturing processes. In addition, each cutting fluid has a disparate composition to cater varying convoluted requirements of the machining operation. For example, depending on the machining speeds and loads, different base oil viscosities for cutting fluids are needed. Similarly, dissimilar thickeners provide distinct characteristics, like good adhesion to workpiece surface or good corrosion resistance. There is a wide range of cutting fluids available in the market, each having unique composition and property, and, therefore, recognizing a particular cutting fluid as the most suitable choice from those present alternatives is an arduous task. In a workshop, assorted machining operations are carried out on various workpiece materials and, thus, it is not at all economical to store a large variety of cutting fluids to meet all those machining requirements. Besides, the functional and economical requirements and compatibility of the cutting fluids with other components of the machine tool should be contemplated while choosing the best alternative. Compatibility issue arises because interaction of the cutting fluid is not limited to cutting tool only but also with other tool parts, like seal, paint of the machine tool, and so forth. Additionally, it is acknowledged that a cutting fluid which is otherwise appropriate may not be preferred by the end user owing to its odour or viscosity. Moreover, there may be instances, where multiple machining operations are conducted employing the same machine tool. These factors further complicate the nature of the selection problem. Thus, this paper proposes the development of a decision making model which aids in selecting a suitable cutting fluid for a given machining condition using quality function deployment (QFD) technique in a cost effective manner. A user friendly software prototype in Visual BASIC 6.0 is designed to ease out the entire cutting fluid selection procedure.
De Chiffre and Belluco [
The review of the earlier research works reveals that a diverse range of MCDM methods and computer-based software has been applied for evaluation and selection of cutting fluids for varying machining applications. But, those previously implemented MCDM methodologies, such as AHP, TOPSIS, MOOSRA, SAW, WPM, digraph theory, and matrix approach, have some inherent limitations. For example, AHP method is generally complex and time consuming due to the formation of its pairwise comparison matrices. TOPSIS method captures only the objective criteria while ignoring the subjective ones, while MOOSRA method is quite sensitive to large variations in the rationalized values of the attributes. On the other hand, SAW method only employs maximizing evaluation criteria and therefore minimizing evaluation criteria should be converted into maximizing forms prior to their application. In digraph theory and matrix approach, the number of interrelationships between the considered evaluation criteria grows on considerably with increase in the number of attributes, and WPM method is designed to solve only those decision problems that involve criteria all of the same type. In addition, most of the past research works were focused on green manufacturing and considered only the occupational health and environmental hazards caused due to the applications of various cutting fluids in manufacturing industries. It is observed that till date no attempt has been made to include those factors that significantly affect the choice of cutting fluid, like (a) machining operation, (b) workpiece material, and (c) cutting material into the decision making framework. Moreover, the previously applied techniques did not provide any emphasis on the requirements of customers which play a crucial role in success and growth of any manufacturing industry. Therefore, there is an ardent need for establishment of a reliable and structured decision making model which can explicitly evaluate the quality and capability of cutting fluids to arrive at the best possible course of action. The QFD is a technique that can effectively incorporate customers’ needs into a product. It also encourages group decision making where discussions continue until all the available and pertinent information are analyzed, and a consensus choice of alternatives most likely to attain the organization’s stated goals is achieved. Thus, in this paper, a QFD-based model is developed in Visual BASIC 6.0 to choose the most suitable cutting fluid to achieve better process performance. The developed model would eliminate rigorous calculations and probable human error involved in the selection process through dramatically minimizing human intervention, thus reducing the time to arrive at the best cutting fluid selection decision.
In the contemporary competitive environment, quality of product has been transformed into a hygiene factor instead of being a differentiating factor for the manufacturing organizations. Simultaneously, the emphasis of the organizations has been progressively focused on methods and techniques for supporting design and development of products which meet the specifications defined by the customers. Additionally, it is also eminent that consumers’ wants and needs constantly vary with respect to time and are always dynamic in nature. Thus, the manufacturing organizations are required to implement a method which emphasizes on how to accommodate these changing needs into the designed product and even endeavor to forecast them in the near future that would benefit customers in long run. QFD is a method to capture each stated and unstated need of the customers within “voice of customers” and convert them into specific plans to manufacture products to meet those customers’ requirements. It has the ability to evaluate performance of various technical requirements based on the needs of customers that can simplify, speed up, and improve the design cycle of the developed product. Unlike other approaches which focus more on engineering capabilities and less on customers’ needs, QFD concentrates all product development activities on customers’ needs.
QFD method employs a robust matrix, commonly known as house of quality (HOQ) matrix for documentation of the necessary information and perceptions about the product [
HOQ matrix.
Cutting fluids are extensively utilized in manufacturing industries to cater the varying needs of machining processes. Application of a cutting fluid has many benefits as discussed above; however, in certain instances, use of an inappropriate cutting fluid may hinder the material removal process instead of facilitating it. Thus, the process engineers need to have domain expertise and experience in order to analyze, evaluate, and choose the best cutting fluid alternative for a specific combination of machining operation, workpiece material, and cutting material. Additionally, cutting fluid selection is a process of addressing trade-offs between several competing demands of the customers, which involve huge time consuming computations. These issues can be tackled successfully through adoption of a QFD-based decision making model as it solves the cutting fluid selection problem while providing due importance to the needs of customers (i.e., machining application requirements). This decision making framework is entirely automated through development of a software prototype which is integrated with a database of cutting fluids in order to minimize human intervention. The software prototype is designed in Visual BASIC 6.0 to have a user friendly graphical interface. Figure
Architecture of the QFD-based model for cutting fluid selection.
In the first step, cutting fluids available in the market are categorized according to their composition and subsequently an exhaustive database of those cutting fluid types is developed. The pertinent information and detailed data regarding the properties of each category of cutting fluid are compiled from the catalogs and brochures of various cutting fluid manufacturers present on their corresponding websites.
Next, a critical analysis of the related past research works, published books, and periodicals [
Flow and pressure of a cutting fluid are determined by its mode of application, like flooding, spraying, dripping, misting, brushing, and so forth. Utilization of those cutting fluid application modes mainly depends upon the requirements of machining application and availability of the equipment. It is observed that a machine operator usually utilizes his knowledge and experience to opt for a particular mode of application of cutting fluid with a view to maximize its penetration to the point of contact considering all the facility constraints. Therefore, taking this into account, the developed QFD-based model is designed in such a way that the selection procedure of cutting fluid is not dependent on its flow and pressure. This facilitates flexibility in choosing the best cutting fluid based on all important criteria, and then according to availability of machineries and machining application requirements, one can vary pressure and flow of the selected cutting fluid while employing different modes of application.
After the choices related to the combination of the said three parameters are made, the first part of the third stage starts with the identification of various evaluation criteria from a detailed list of different physical and chemical properties associated with the cutting fluid. Density at 29°C (in g/cm3), pH at 5% tap water, corrosion resistance (in relative (R) scale), flash point (in °C), pour point (in °C), viscosity at 40°C (in cSt), sulphur wt%, chlorine wt%, fatty ester wt%, cost (in R scale), lubricity (in R scale), cooling (in R scale), foaming (in R scale), disposability (in R scale), recyclability (in R scale), and rancidity (in R scale) are taken into account as the most important properties for evaluating cutting fluids. Here, a relative scale of 1–5 is used, where 1 and 5 represent the lowest and the highest values, respectively, as given in Table
Scale indicating relative values for cutting fluid properties.
Scale | Interpretation |
---|---|
1 | Lowest |
2 | Low |
3 | Moderate |
4 | High |
5 | Highest |
A market survey is then conducted employing customers’ feedback forms and questionnaires to accumulate demands of the customers related to selection of a cutting fluid. The important customers’ requirements associated with selection of cutting fluid are identified as follows: the ability to dissipate the generated heat, to lubricate the contact surface, to wash away chips; protecting against corrosion, not foam or smoke away, having compatibility with the machine tool, facilitating good surface finish, being stable while in application and in storage, procurement cost, maintenance/recycling/disposal cost, deleterious effect on operator, nontoxic and odourless, noninflammable, and not causing pollution and bacterial contamination. These customers’ requirements are placed along the rows of HOQ matrix.
The development of the related HOQ matrix is the final part of the third stage, which begins with identifying the beneficial or nonbeneficial customers’ requirements. These customers’ requirements are quantified by the value of the corresponding improvement driver (
Scale indicating priority weight and correlation index.
Scale | Priority weight | Correlation index |
---|---|---|
1 | Not important | Very, very weak relation |
2 | Least important | Very weak relation |
3 | Very less important | Weaker relation |
4 | Less important | Weak relation |
5 | Moderately important | Moderate relation |
6 | Important | Strong relation |
7 | Very important | Stronger relation |
8 | Very, very important | Very strong relation |
9 | Most important | Very, very strong relation |
The last stage of this model embarks with establishing the decision matrix to obtain performance scores for the shortlisted cutting fluid alternatives. The developed framework provides the end user with two options, that is, “cutting fluid alternatives from database,” that is, to choose suitable cutting fluid alternatives from the integrated database and “customized cutting fluid alternatives,” that is, flexibility to fill up the decision matrix with relevant details of the suitable cutting fluid options according to the end user’s choice. Once the decision matrix is completely developed, a linear normalization approach is employed to generate a normalized matrix to make it dimensionless and comparable. Now, the performance score for each cutting fluid alternative is calculated using the following expression:
Two illustrative examples are demonstrated and subsequently solved in this paper to validate the potentiality and applicability of the developed QFD-based model for cutting fluid selection.
In this example, the most suitable cutting fluid is intended to be selected for drilling holes in titanium alloy employing drill bits of tungsten carbide. The selection procedure begins with choosing the relevant details about the machining operation, workpiece material, and cutting material from various options available in the opening window of the developed framework, as shown in Figure
Opening window for Example 1.
In the subsequent stage of this selection procedure, different important evaluation criteria which affect the cutting fluid selection process are identified as density, flash point, fatty ester wt%, cost, and rancidity. The “HOQ matrix” functional key is then pressed to generate an empty HOQ matrix. The improvement driver values articulating beneficial and nonbeneficial attributes of the customers’ requirements are then filled up in the HOQ matrix. The priority values for the considered customer’s requirements are also entered into their respective positions. The correlation indices indicating the interrelationships between customers’ requirements and technical requirements are then put into the HOQ matrix. Once all the relevant data are assigned to HOQ matrix, “Weight” functional key is pressed to derive the priority weight for each of the considered evaluation criteria. It is observed that density, rancidity, and cost have negative priority weights as they are the nonbeneficial attributes, whereas flash point and fatty ester wt% with positive priority weights are always preferred with their higher values. A set of seven alternatives to be evaluated is chosen from the list of feasible cutting fluids for final selection of the most appropriate option, as exhibited in Figure
HOQ matrix for Example 1.
The final decision matrix for this cutting fluid selection problem is developed in another window from the database on pressing “decision matrix” functional key. The performance scores and ranking preorder of the finally shortlisted seven cutting fluid alternatives along with a graphical representation of their performance scores are shown in Figure
Decision matrix for Example 1.
This example illustrates the selection procedure of the most suitable cutting fluid for performing honing operation on stainless steel alloy with cubic boron nitride tool. Thus, “honing/lapping,” “stainless steel alloy,” and “cubic boron nitride” are, respectively, chosen as the machining operation, workpiece material, and cutting material, as exhibited in Figure
Opening window for Example 2.
For this selection problem, corrosion resistance, viscosity, sulphur wt%, and recyclability are considered as the most significant evaluation criteria based on their effects on the machining requirements. The developed model then generates an empty HOQ matrix which is subsequently filled up by the end user with pertinent details. The corresponding HOQ matrix is exhibited in Figure
HOQ matrix for Example 2.
Now, the end user provides all the necessary data for the five honing fluid alternatives as required for calculating their performance scores in the decision matrix, as shown in Figure
Decision matrix for Example 2.
In the current scenario of rapid technological advancement, cut-throat competition, and information processing revolution, manufacturing organizations are being compelled to relentlessly develop innovative methods/technologies to produce high quality products/components at the lowest possible cost and time to cater the diverse and dynamic needs of customers. Thus, this paper emphasizes on development of a QFD-based model to automate the entire decision making process for selecting the best cutting fluid alternative for a given machining condition. The graphical user interface built in Visual BASIC 6.0 facilitates a seamless interaction of the developed model with the process engineers. The level of human intervention is drastically reduced, requiring no in-depth technical knowledge regarding the cutting fluid’s applicability, capability and economy, and related effects of the considered evaluation criteria on the machining operation. It implies that the developed QFD-based decision making model minimizes human error, thereby assisting in better management of cutting fluids through ascertaining an effective and productive work culture in the organization. The approach of continuous improvement of the manufacturing organization is also supported through periodic upgrading of the database with the changing business environment. Moreover, this designed framework is flexible in nature in two dimensions. At first, it includes a wide range of cutting fluid alternatives from diverse manufacturers into its database, and secondly the end user is provided with two options, that is, evaluating the common cutting fluids retrieved from the existing database or examining special ones through personally entering their details. The results derived from implementation of this QFD-based model exactly corroborate with the practiced choices of the industrial experts. The application of this model also reduces manpower requirement, enhances personnel efficiency, and utilizes information effectively, thus minimizing the overall machining cost.
The authors declare that there is no conflict of interests regarding the publication of this paper.