The theoretical homology based structural model of Cry1Ab15 δ-endotoxin produced by Bacillus thuringiensis BtB-Hm-16 was predicted using the Cry1Aa template (resolution 2.25 Å). The Cry1Ab15 resembles the template structure by sharing a common three-domain extending conformation structure responsible for pore-forming and specificity determination. The novel structural differences found are the presence of β0 and α3, and the absence of α7b, β1a, α10a, α10b, β12, and α11a while α9 is located spatially downstream. Validation by SUPERPOSE and with the use of PROCHECK program showed folding of 98% of modeled residues in a favourable and stable orientation with a total energy Z-score of −6.56; the constructed model has an RMSD of only 1.15 Å. These increments of 3D structure information will be helpful in the design of domain swapping experiments aimed at improving toxicity and will help in elucidating the common mechanism of toxin action.
1. Introduction
Bacillus thuringiensis (Bt) a soil bacterium produces pertinacious toxin generally referred to as insecticidal crystal protein. This toxin belongs to a large family with target spectrum spanning insects, nematodes, flatworm, and protozoa [1]. In nature, Cry toxins are produced as crystalline protoxin (hence named Cry protein) within Bt sporangia, and after ingestion by a susceptible insect larva, these protoxins are solubilized and proteolytically cleaved into an active toxin fragment that binds to at least one of the four different types of high affinity receptors and later get inserted into the brush border epithelium. The insertion of toxin creates pores in the cell membrane that causes the leaching of the cellular electrolytes. This disruption causes cell lyses and finally larval death [2]. So far, Cry1 toxins have extensively been used in studies of insect control either as transgenic spores or as spray formulations. Where three-dimensional crystal structure of Cry1 family of protein is concerned, few of the toxins in solutions have been analysed by X-ray diffraction crystallography [3–9], and a few of them have been predicted using the homology modelling method [10–12]. All these toxins have a different toxicity spectrum; in spite of this, these proteins show a similar tertiary organization. This property impels for elucidation of three-dimensional structures of the rest of the reported Cry1 family members for possible setting down of unifying mechanisms underlying the toxicity. There are currently many templates for protein structures prediction available from the Protein Data Bank (PDB) [13], and all such templates are constantly increasing in number. For three-dimensional structure prediction, modeled structure, by applying template-based modeling, has become so accurate that they can be applied for molecular replacement information in many cases. Therefore, in this paper, as an increment in a structure elucidation, the model of the Cry1Ab15 toxin is reported based on the hypothesis of structural similarity with Cry1Aa toxin [7]. This model supports existing hypotheses of receptor insertion and will further provide an initiation point for the domain-swapping and mutagenesis experiments among different Cry toxins.
2. Materials and Methods2.1. Sequence Data
The amino acid sequence of the putative Cry1Ab15 protein of Bacillus thuringiensis was retrieved from the National Center for Biotechnology Information (NCBI) database. The sequence accession number was AAO13302. It was ascertained that the three-dimensional structure of the protein was not available in the Protein Data Bank; hence, the present exercise of developing the three-dimensional model was undertaken.
2.2. Template Selection and Structure Prediction
Homology method-dependent modeling is an effective approach for a three-dimensional structure of protein provided by an experimentally obtained three-dimensional structure of homologous protein. All experimentally determined homologous protein can serve as a template for modeling. Since template selection is an important factor that affects quality, therefore, an attempt was made for a suitable template searching using mGenTHREADER [14], which is an online tool for searching similar sequences, based on sequence and structure-wise similarity. The target protein was 577 amino acid long stretches. From the homologous searching, Cry1Aa (PDB: 1CIY, resolution 2.25 Å) was selected as a template protein. Finally, amino acid sequence alignment between the target (Cry1Ab15) and template protein was derived using the MEGA4 software [15]. The three-dimensional structure of target protein was predicted by using the alignment file in MODELLER software [16] whereby predicted structure was returned.
2.3. Homology Modeling of Cry1Ab15
The possible outliers and side chains static constrain refinement of the developed model was performed on Summa Lab server [17] after the selected theoretical model were further subjected to a series of tests for evaluating its consistency and reliability. Backbone confirmation was evaluated by the inspection of the Psi/Phi Ramachandran plot from RAMPAGE web server [18]. The energy criterion was evaluated by ProSA web server [19], which compares the potential of mean forces derived from a large set of NMR and X-ray crystallographically derived protein structures of similar sizes. Potential deviations were calculated by SUPERPOSE web server [20] for root mean square deviations (RMSD) between target and template protein structure. The comparative analysis of generated model showed it to be superimposable. The secondary structure visualization was made using PDBsum [21], and amino acid sequence alignments are generated with SAS software [22] (Figure 1). The visualization of models was performed on UCF Chimera software [23] and PyMOL [24] loaded on a personal computer machine that has an Intel Quad core processor and four gigabytes of random accessed memory. Figures and electrostatic potential calculations were generated with PyMOL0.99rc6. The final model was submitted to the PMDB database [25] to obtain protein model databank (PMDB) identifier PM0076556.
Amino acid sequence alignment of the Cry1Ab15 with Cry1Aa (1ciy: A). The residues highlighted in red color represent helix; those in blue represent strand; in green represent turn; and those in black represent coil, and alignment is generated using SAS software.
3. Results and Discussion
Sequence alignment showed 88.3% identity (Smith Waterman Score-3356; Z-Score-3981.3; E Value-6.4e-215) between the Cry1Ab15 and Cry1Aa. It is observed that a model tends to be reliable if identity percentage between the template and target protein is above 40%. Low degree of reliability arises when identity decreases below 20% [26]. Identity difference in the present case is sufficiently high to carry out the theoretical modeling for the Cry1Ab15 toxin stretch of 84–661 residues (Figure 1). Sequence alignment of domain I, domain II, and domain III was straightforward within the possible limits of flanking domains. Domain III is quite well conserved both on the N-terminal and C-terminal sides. Domain I is composed of residues 86–341 and consists of 9 α-helices and too small β-strands. All the helices in the Cry1Ab15 model were slightly longer than those in Cry1Aa (Table 1). The amphiphilicity (Hoops and Woods) values indicated an exposed nature of a few of the helices of domain I (α1, α2a, α2b, α3, and α6). These values correspond well with the accessibility calculated with Swiss PDB, except for α1, which is packed against domain II (Figure 2). It is possible that this helix will have some mobility, with an emphasis that one of the cutting sites by gut proteases is located close to the middle of this helix [27]. On the other hand, membrane insertion and pore formation are thought to occur through elements of domain I, composed of a bundle of six amphipathic α-helices surrounding the highly hydrophobic helix α5 [7]. Spectroscopic studies with synthetic peptides corresponding to domain I helices revealed that α4 and α5 have the greatest propensity for insertion into artificial membranes, although insertion and pore formation were more efficient when α4 and α5 were connected by a segment analogous to the α4-α5 loop of the toxin [28, 29]. A particularly large number of single-site mutations with altered amino acids from these helices, which lead to a strong reduction in the toxicity and pore-forming ability of the toxin, have been characterized [30–33]. Also, a site-directed chemical modification study has provided strong evidence that α4 lines the lumens of the pores formed by the toxin [34]. Recent studies have established that toxin activity is especially sensitive to modifications not only in the charged residues of α4 [33] but also in most of its hydrophilic residue [30]. Furthermore, the loss of activity of most of these mutants did not result from an altered selectivity or the size of the pores, but from a reduced pore-forming capacity of the toxin [34]. The charge distribution pattern in the Cry1Ab15 theoretical model corresponds to a negatively charged patch along β4 and β13 (Figures 3 and 4) of domains II and III, respectively. The Cry1Ab15 domain I model relates well with the data from Gerber and Shai [29] who have suggested that α4 and α5 insert into the membrane in an antiparallel manner as a helical hairpin. It is possible that according to the surface electrostatic potential of helices 4 and 5 there was a neutral region in the middle of the helices which probably indicates, if we follow the umbrella model and consider it to be correct, that both helices cross the membrane with their polar sides exposed to the solvent as it has been suggested by the results of mutagenesis experiments done by Girard et al. [31] with the Cry1Ac toxin. This region is also the most conserved among the Cry toxins. Girard et al. [31] demonstrated that mutations in the base of helix 3 and the loop between α3 and α4 that cause alterations in the balance of negative charged residues may cause loss of toxicity. Mutations in helices α2 and α6 and the surface residues of α3 have no important effect on toxicity; meanwhile, helices α4 and α5 seem to be very sensitive to mutations. Helix α1 probably does not play an important part in toxin activity after the cleavage of the protoxin. It is possible that the mutations aimed to an increasing the amphiphilicity in these helices will improve the pore-forming activity of the Cry1Ab15 type toxins. The structure of domain I of the toxin, the effect of site-directed mutagenesis in this domain on toxin activity, and the studies with hybrid toxins [35–37] all suggest that domain I, or parts of it, inserts 125 into the membrane and forms a pore. This idea is further supported by studies that show that truncated proteins corresponding to domain I of CryIA(c) [38] δ-endotoxin form ion channels in model lipid membranes similar to those formed by the intact toxins. After receptor binding, the network of contacts between α7, the helix in the interface between the pore-forming domain and the receptor-binding domain, and α5, α6, and, presumably, α4 helices may assist at the insertion of the α4-α5 hairpin into the membrane by the unpacking of the helical bundle that exists in the nonmembrane-bound form of the toxin. This hypothesis might account for the observation that α7 mutants are susceptible to proteolysis by either trypsin or midgut juice [39]. Our model also supports the notion that the α4-α5 hairpin is the major structural component in the lining of the pores formed by δ-endotoxin. Therefore, it is possible to create toxin variants with better membrane permeability potential by stabilizing the hairpin antiparallel structure by cross-linking α4 with α5. This postulation is important because mutations within transmembrane segments of proteins usually decrease or have no effect on the biological activities of these proteins. Thus, it is conceivable that the introduction of several salt bridges or other bonds between α4-α5 helices or the stabilization of the α4-α5 hairpin by the creation of bridging interactions between the α3-α4 and α5-α6 loops may result in a significantly enhanced toxic activity. Other studies also support the umbrella-like model for domain I insertion into membranes [34, 40, 41]. As for other Cry toxins, domain II of the Cry1Ab15 toxin consists of three Greek key beta sheets arranged in a beta prism topology. It is comprised of residues 350–508, one helix (α8), and 11 β-strands (Table 1). In the case of the three domain Cry toxins, specificity is mostly attributed to their capacity to bind to certain proteins located on the surface of the intestinal membrane through specific segments of domains II and III, composed mainly of β sheets [42, 43]. Loop β4-β5 is mostly hydrophilic, and the charged residues located at the tip of the loop are probably important determinants of insect specificity. As in loop β2-β3, few glycine residues are also present before a negatively charged residue supporting the hypothesis that correct orientation of charged residues in the specificity loops could be important in receptor recognition. Mutations in defined regions of the Cry1Aa toxin have identified residues 365–371 (equivalent to residues in the Cry1Ab15 β6-β7 loop) as essential for binding to the membrane of midgut cells of Bombyx mori [35, 44]. In the Cry1Ab15 model, this region is shorter than their counterparts in Cry1Aa. Loop β2-β3 seems also to be able to modulate the toxicity and specificity of Cry1C [45]. The dual specificity of Cry2Aa for Lepidoptera and Diptera has been mapped to residues 307–382 that corresponds in the Cry1Ab15 theoretical model to sheet 1, strand β6, and loop β6-β7. Domain III comprised residues 471–608 and showed high conservation of residues and the only important modification is a 3-residue deletion between β16 and β17. Several studies indicate that site mutations in conserve blocks reduce toxicity and alter channel properties at least in Cry1Ac [7] and Cry1Aa [42, 46], and divergence in block 5 element [8, 41] postulates an alternative mechanism of membrane permeabilization.
The comparison among three-domain structural components of Cry1Aa and Cry1Ab15 toxin molecules.
Domain I
Domain II
Domain III
Cry1Aa
Cry1Ab15
Cry1Aa
Cry1Ab15
Cry1Aa
Cry1Ab15
β0
—
Thr31-Tyr33
α8a
Pro271-Glu274
Pro271-Asn275
α11a
Leu475-Lys477
—
α1
Pro35-Ser48
Pro35-Ser48
α8b
Ala284-Gln289
Ser283-Ser290
β13a
Ser486-Val488
Ser487-Val489
α2a
Aln54-Ile63
Aln54-Trp65
β2
Asp298-His310
Ile299-His310
β13b
Ile498-Arg501
Ile499-Arg502
α2b
Pro70-Ile84
Pro70-Ile84
β3
Phe313-Trp316
Glu313-Ser324
β14
Gly505-Asn513
Gly506-Asn514
α3
Glu90-Ala119
Glu90-Ala119
β4
Gly318-Pro325
Tyr359-Arg368
β15
Tyr522-Ser530
Tyr523-Ala530
α4
Pro124-Leu148
Pro124-Leu148
α9
Val326-Phe328
*
Ser409-Glu412
β16
Leu534-Ile540
Leu534-Ile541
α5
Gln154-Trp182
Val155-Trp182
β5
Val348-Ser351
Leu380-Tyr390
β17
Arg543-Phe550
Arg544-Phe551
α6
Ala186-Val218
Ala186-Val218
β6
Ile357-Arg367
Ala399-Tyr401
α12a
Ser562-Ser564
Ser563-Ser565
α7a
Ser223-Thr239
Ser223-Tyr250
β7
Leu380-Leu383
Thr406-Asp408
β18
Arg566-Gly569
Arg567-Phe571
α7b
Leu241-Tyr250
—
β8
Gly385-Phe390
His428-Arg437
β19
Ser580-His588
Ser581-His589
β1a
Glu266-Thr269
—
β9
Thr400-Tyr402
Ile447-His457
β20
Val596-Pro605
Val597-Pro606
α10a
Ser410-Asp412
—
α13
—
Phe611-Ala623
α10b
Pro423-Gly426
—
β10
His429-Val434
Gln473-Pro475
β11
Phe452-His456
Thr480-Leu482
β12
Thr471-Pro474
—
—: similar component not present. *Components in italics are spatially present at downstream sites.
The two-dimensional structure annotation showing sequential arrangements of helices and sheets in Cry1Ab15 toxin molecule using the PDB Sum (http://www.ebi.ac.uk/pdbsum/). The structure is as the spiral shape are helix labeled as H1 and H2; and the arrows as strands are labeled by their sheets A and B while motifs β are beta turn and γ are gamma turn while the bend tube shape is a beta hairpin.
The comparative three-dimensional, three-domain structure of the Cry1Ab15 ((b), (d), (f)) and Cry1Aa ((a), (c), (e)) molecules.
The comparative figures separately showing details among three structural domains of Cry1Ab15 and Cry1Aa molecules.
Finally, the recognition of artefacts and errors in experimental and theoretical structures remains a problem in the field of structure modeling. A structural comparison of Cry1Aa toxin with the theoretical model of the Cry1Ab15 protein indicates correspondence with the general model for a Cry protein the superimposed backbone traces showed low RMS deviations (Figure 5). The comparison between the overall energy of developed structure and those of experimentally determined structures in PROSA database validated the developed model as folded near to experimentally determined, natural structures (Figure 6) while the Ramachandran plot analysis (Figure 7) supported the above conclusions by showing that most of the residue (98%) has φ and ψ angles in the core- and allowed-regions, except for nine residues which qualified for outlier region. Most bond lengths, bond angles, and torsion angles were in the range of values expected for a naturally folded protein (Figure 7).
Superimposed backbone 3D structure between Cry1Aa1 (green) and Cry1Ab15 (red) coordinates. The RMSD for backbone and alpha carbons is 1.15. The image was generated using the SUPERPOSE software (http://wishart.biology.ualberta.ca/SuperPose/).
Evaluation of Cry1Ab15 using ProSA server (https://prosa.services.came.sbg.ac.at/). The plot indicating nearness of constructed structure with the native structures. The Z-score of evaluated model was −6.56, shown as a large black dot.
Ramachandran plot analysis of the Cry1Ab15 toxin oligomer showing placement of residues in deduced model. General plot statistics are: 94.0% (568/604) of all residues were in favored (98%) regions residues in additional allowed regions 99.0% (598/604) of all residues were in allowed (>99.8%) regions. The figure was generated using RAMPAGE web server (http://mordred.bioc.cam.ac.uk/).
4. Conclusions
In conclusion, evidence presented here, based on the identification of structural equivalent residues of Cry1Aa in Cry1Ab15 toxin through homology modeling, indicates that due to the high amino acid homology between these two toxins, they do share a common three-dimensional structure. Cry1Aa and Cry1Ab15 contain the most variable regions in the loops of domain II, which is responsible for the specificity of these toxins. Structural comparison indicates a correspondence to the general model for a Cry protein (an α + β structure with three domains) and few of the differences present are the presence of 175 β0 and α3 the absence of α7b, β1a, α10a, α10b, β12, and α11a while α9 is located spatially downstream. This is the first model of a Cry1Ab15 protein and its importance can be perceived since the members of this group of toxins are potentially important entomopathogenic candidates.
Conflict of Interests
The author declares that he has no direct financial relation with the commercial identities mentioned in the paper that might lead to a conflict of interests including the necessary citation.
Acknowledgments
The author is grateful to ICAR for fellowship. Infrastructure facility and encouragement of the Director NBAIM are duly acknowledged.
RohJ. Y.ChoiJ. Y.LiM. S.JinB. R.JeY. H.Bacillus thuringiensis as a specific, safe, and effective tool for insect pest control20071745475592-s2.0-34248371704HofmannC.VanderbruggenH.HofteH.van RieJ.JansensS.van MellaertH.Specificity of Bacillus thuringiensisδ-endotoxins is correlated with the presence of high-affinity binding sites in the brush border membrane of target insect midguts19888521784478482-s2.0-0006952717BoonsermP.DavisP.EllarD. J.LiJ.Crystal structure of the mosquito-larvicidal toxin Cry4Ba and its biological implications200534823633822-s2.0-1624439243510.1016/j.jmb.2005.02.013BoonsermP.MoM.AngsuthanasombatC.LescarJ.Structure of the functional form of the mosquito larvicidal Cry4Aa toxin from Bacillus thuringiensis at a 2.8-angstrom resolution20061889339134012-s2.0-3364625735610.1128/JB.188.9.3391-3401.2006DerbyshireD. J.EllarD. J.LiJ.Crystallization of the Bacillus thuringiensis toxin Cry1Ac and its complex with the receptor ligand N-acetyl-D-galactosamine20015712193819442-s2.0-003521472410.1107/S090744490101040XGalitskyN.CodyV.WojtczakA.GhoshD.LuftJ. R.PangbornW.EnglishL.Structure of the insecticidal bacterial δ-endotoxin Cry3Bb1 of Bacillus thuringiensis2001578110111092-s2.0-003490281310.1107/S0907444901008186GrochulskiP.MassonL.BorisovaS.Pusztai-CareyM.SchwartzJ.BrousseauR.CyglerM.Bacillus thuringiensis CryIA(a) insecticidal toxin: crystal structure and channel formation199525434474642-s2.0-002961921610.1006/jmbi.1995.0630LiJ.CarrollJ.EllarD. J.Crystal structure of insecticidal δ-endotoxin from Bacillus thuringiensis at 2.5 Å resolution199135363478158212-s2.0-002605063910.1038/353815a0MorseR. J.YamamotoT.StroudR. M.Structure of Cry2Aa suggests an unexpected receptor binding epitope2001954094172-s2.0-003498064210.1016/S0969-2126(01)00601-3GutierrezP.AlzateO.OrduzS.A theoretical model of the tridimensional structure of Bacillus thuringiensis subsp. medellin Cry 11Bb toxin deduced by homology modelling20019633573642-s2.0-0035315996Xin-MinZ.Li-QiuX.Xue-ZhiD.Fa-XiangW.The theoretical three-dimensional structure of Bacillus thuringiensis Cry5Aa and its biological implications20092821041102-s2.0-6344909776610.1007/s10930-009-9169-0XiaL. Q.ZhaoX. M.DingX. Z.WangF. X.SunY. J.The theoretical 3D structure of Bacillus thuringiensis Cry5Ba20081498438482-s2.0-4844909360410.1007/s00894-008-0318-8BermanH. M.WestbrookJ.FengZ.GillilandG.BhatT. N.WeissigH.ShindyalovI. N.BourneP. E.The protein data bank20002812352422-s2.0-0033954256BuchanD. W. A.WardS. M.LobleyA. E.NugentT. C. O.BrysonK.JonesD. T.Protein annotation and modelling servers at University College London2010382W563W5682-s2.0-7795428747810.1093/nar/gkq427TamuraK.DudleyJ.NeiM.KumarS.MEGA4: molecular evolutionary genetics analysis (MEGA) software version 4.02007248159615992-s2.0-3454778175010.1093/molbev/msm092SaliA.PottertonL.YuanF.van VlijmenH.KarplusM.Evaluation of comparative protein modeling by MODELLER19952333183262-s2.0-002887181410.1002/prot.340230306SummaC. M.LevittM.Near-native structure refinement using in vacuo energy minimization20071049317731822-s2.0-3384767358310.1073/pnas.0611593104DavisI. W.Leaver-FayA.ChenV. B.BlockJ. N.KapralG. J.WangX.MurrayL. W.ArendallW. B.IIISnoeyinkJ.RichardsonJ. S.RichardsonD. C.MolProbity: all-atom contacts and structure validation for proteins and nucleic acids200735W375W3832-s2.0-3454759255710.1093/nar/gkm216WiedersteinM.SipplM. J.ProSA-web: interactive web service for the recognition of errors in three-dimensional structures of proteins200735W407W4102-s2.0-3454756644610.1093/nar/gkm290MaitiR.van DomselaarG. H.ZhangH.WishartD. S.SuperPose: a simple server for sophisticated structural superposition200432W590W5942-s2.0-324288121110.1093/nar/gkh477LaskowskiR. A.ChistyakovV. V.ThorntonJ. M.PDBsum more: new summaries and analyses of the known 3D structures of proteins and nucleic acids200533D266D2682-s2.0-1344425430010.1093/nar/gki001MilburnD.LaskowskiR. A.ThorntonJ. M.Sequences annotated by structure: a tool to facilitate the use of structural information in sequence analysis199811108558592-s2.0-0031762430PettersenE. F.GoddardT. D.HuangC. C.CouchG. S.GreenblattD. M.MengE. C.FerrinT. E.UCSF Chimera—a visualization system for exploratory research and analysis20042513160516122-s2.0-444422156510.1002/jcc.20084The PyMOL Molecular Graphics SystemVersion 1.2r3pre, PyMol was used for visualization of modelsSchrödinger, LLCCastrignanòT.De MeoP. D.CozzettoD.TalamoI. G.TramontanoA.The PMDB protein model database200634D306D3092-s2.0-33644877685ChothiaC.LeskA. M.The relation between the divergence of sequence and structure in proteins1986548238262-s2.0-0022706389SeguraC.GuzmanF.PatarroyoM. E.OrduzS.Activation pattern and toxicity of the Cry11 bb1 toxin of Bacillus thuringiensis subsp. medellin200076156622-s2.0-003384848110.1006/jipa.2000.4945LuH.RajamohanF.DeanD. H.Identification of amino acid residues of Bacillus thuringiensisδ-endotoxin CryIAa associated with membrane binding and toxicity to Bombyx mori199417617555455592-s2.0-0028128867GerberD.ShaiY.Insertion and organization within membranes of the δ-endotoxin pore-forming domain, helix 4-loop-helix 5, and inhibition of its activity by a mutant helix 4 peptide20002753123602236072-s2.0-003460464510.1074/jbc.M002596200GazitE.La RoccaP.SansomM. S. P.ShaiY.The structure and organization within the membrane of the helices composing the pore-forming domain of Bacillus thuringiensisδ-endotoxin are consistent with an “umbrella-like” structure of the pore1998952112289122942-s2.0-0032514753GirardF.VachonV.PréfontaineG.MarceauL.SuY.LaroucheG.VincentC.SchwartzJ. L.MassonL.LapradeR.Cysteine scanning mutagenesis of α4, a putative pore-lining helix of the Bacillus thuringiensis insecticidal toxin Cry1Aa2008749256525722-s2.0-4304915007310.1128/AEM.00094-08KumarA. S. M.AronsonA. I.Analysis of mutations in the pore-forming region essential for insecticidal activity of a Bacillus thuringiensisδ-endotoxin199918119610361072-s2.0-0032870058Nuez-ValdezM. E.SánchezJ.LinaL.GüerecaL.BravoA.Structural and functional studies of α-helix 5 region from Bacillus thuringiensis Cry1Ab δ-endotoxin2001154611221312-s2.0-003583133110.1016/S0167-4838(01)00132-7CouxF.VachonV.RangC.MoozarK.MassonL.RoyerM.BesM.RivestS.BrousseauR.SchwartzJ.LapradeR.FrutosR.Role of interdomain salt bridges in the pore-forming ability of the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac20012763835546355512-s2.0-003592964810.1074/jbc.M101887200MassonL.TabashnikB. E.LiuY. B.BrousseauR.SchwartzJ. L.Helix 4 of the Bacillus thuringiensis Cry1Aa toxin lines the lumen of the ion channel19992744531996320002-s2.0-003352756310.1074/jbc.274.45.31996GeA. Z.ShivarovaN. I.DeanD. H.Location of the Bombyx mori specificity domain on a Bacillus thuringiensisδ-endotoxin protein19898611403740412-s2.0-0024687823AhmadW.EllarD. J.Directed mutagenesis of selected regions of a Bacillus thuringiensis entomocidal protein1990681-2971042-s2.0-0025138436WuD.AronsonA. I.Localized mutagenesis defines regions of the Bacillus thuringiensisδ endotoxin involved in toxicity and specificity1992267423112317WaltersF. S.SlatinS. L.KuleszaC. A.EnglishL. H.Ion channel activity of N-terminal fragments from CryIA(c) δ-endotoxin199319629219262-s2.0-002743168510.1006/bbrc.1993.2337DeanD. H.RajamohanF.LeeM. K.WuS. J.ChenX. J.AlcantaraE.HussainS. R.Probing the mechanism of action of Bacillus thuringiensis insecticidal proteins by site-directed mutagenesis—a minireview199617911111172-s2.0-003057427510.1016/S0378-1119(96)00442-8GazitE.BurshteinN.EllarD. J.SawyerT.ShaiY.Bacillus thuringiensis cytolytic toxin associates specifically with its synthetic helices A and C in the membrane bound state. Implications for the assembly of oligomeric transmembrane pores1997364915546155542-s2.0-003070856010.1021/bi9707584SchwartzJ. L.PotvinL.ChenX. J.BrousseauR.LapradeR.DeanD. H.Single-site mutations in the conserved alternating-arginine region affect ionic channels formed by CryIAa, a Bacillus thuringiensis toxin19976310397839842-s2.0-0030756318PigottC. R.EllarD. J.Role of receptors in Bacillus thuringiensis crystal toxin activity20077122552812-s2.0-3425078264610.1128/MMBR.00034-06GómezI.Pardo-LópezL.Munoz-GarayC.FernandezL. E.PérezC.SánchezJ.SoberónM.BravoA.Role of receptor interaction in the mode of action of insecticidal Cry and Cyt toxins produced by Bacillus thuringiensis200728116917310.1016/j.peptides.2006.06.013SmithG. P.EllarD. J.Mutagenesis of two surface-exposed loops of the Bacillus thuringiensis CrylC δ-endotoxin affects insecticidal specificity199430226116162-s2.0-0027997324ChenX. J.LeeM. K.DeanD. H.Site-directed mutations in a highly conserved region of Bacillus thuringiensisδ-endotoxin affect inhibition of short circuit current across Bombyx mori midgets199390199041904510.1073/pnas.90.19.9041