Halophilic Bacteria of Lunsu Produce an Array of Industrially Important Enzymes with Salt Tolerant Activity

The halophilic bacterial isolates SS1, SS2, SS3, SS5, and SS8 were characterized for production of industrially important enzymes like amylase, protease, lipase, and glutaminase. Halophilic bacterial isolates SS1 and SS3 exhibited salt dependent extracellular amylase and protease activities. Both the halophilic isolates SS1 and SS3 exhibited maximum amylase and protease activities in the presence of 1.5 and 1.0 M NaCl, respectively, with the optimum pH 8 and temperature 40°C. SS2 showed maximum extracellular protease and lipase activities in the presence of 0.75 M NaCl, at optimum pH of 7, and temperature 37°C. The glutaminase activity of SS3 increased with increase in concentration of NaCl up to 2.5 M. The optimum pH and temperature for L-glutaminase activity of SS3 was 8 and 40°C, respectively. The combined hydrolytic activities of these halophilic bacterial isolates can be used for bioconversion of organic materials to useful products.


Introduction
Hydrolases constitute a class of enzymes widely distributed in nature from bacteria to higher eukaryotes. The growing demand for enzymes stable under high salt concentrations has focused attention on halophiles. Halophiles receive special interest because they can grow in a wide range of salt concentrations. Halophilic microorganisms are a potential source of extremozymes called halozymes like proteases, amylases, nucleases, lipases, cellulases, xylanases, catalases, and esterases, which are capable of functioning under high concentrations of salt, wide range of pH values, and temperatures at which other proteins will usually precipitate or denature. The halozymes can be exploited wherever enzymatic transformations are required to function in the presence of organic solvents and extremes in temperature and salt content. Halozymes have identical enzymatic features like their nonhalophilic counterpart but exhibit marked differences in their structural features which make them functional at harsh conditions [1]. These include high proportion of acidic amino-acids located predominantly at the protein surface and requirement of high salt concentration for optimum biological functions. The halophilic enzymes are also stable in the presence of high salt concentrations due to conglomeration of slightly hydrophobic groups and hydration of the protein surface due to carboxylic groups present in glutamate and aspartate. These halozymes have been commercialized in various industries including food, baking, feed, chemical and pharmaceutical, paper and pulp, detergent, leather industries, fish sauce and soy sauce preparations, saline waste water, and oilfield waste treatment [2,3]. Various halophiles such as Salicola marasensis sp. IC10, Pseudoalteromonas spp., Haloarcula sp., Haloferax mediterranei, Natrialba magadii, Salimicrobium halophilum LY20, Salinivibrio sp., Nesterenkonia sp. strain F, Chromohalobacter sp. TVSP 101, and Halomonas meridiana have been explored for halozymes such as amylase, lipase, glutaminase, and protease [4][5][6][7][8]. Certain enzymes from halophiles display polyextremophilic features like haloalkaliphilicity, thus showing activity in high saline and high alkaline conditions [9]. For example, enzymes isolated from Pseudoalteromonas spp. CP76 show its optimum activity at high salt concentration (7.5% NaCl) and pH 8.5 [2]. In addition, some archaeal enzymes are of great interest, such as the amylase of Haloarcula sp., function optimally at 4.3 M salt and stable in toluene, benzene, and chloroform [10].

Biochemistry Research International
As salt has the effect of reducing water activity, halophilic enzymes are thought to be important biocatalysts in lowwater-activity environments, such as in aqueous/organic and in nonaqueous media [11]. An alkaline protease tolerant to xylene, ethanol, acetone, butanol, benzene, and chloroform has been reported from salt tolerant Streptomyces clavuligerus strain Mit-1 [12].
In this study we describe the screening and characterization of the extracellular hydrolytic enzymes produced by halophilic microorganisms isolated from the soil sediment of Lunsu, a salt water body of Himachal Pradesh, India. To the author's knowledge, this is the first study on the evaluation of extracellular hydrolytic activities of microorganisms isolated from Lunsu.

Materials and Methods
The halophilic bacterial strains used in this study were isolated from soil sediment of Lunsu water body, Himachal Pradesh, India [13]. The bacterial isolates were identified by 16S rDNA sequencing using 27 F and 1492 R primers.

Characterization of Enzymatic Features of
Halophilic Bacteria 2.1.1. Qualitative Enzyme Assays. The halophilic bacterial isolates SS1, SS2, SS3, SS5, and SS8 were screened for amylase, protease, and lipase activity on LB agar medium containing 1 M NaCl. Medium was supplemented with 1% starch, 1% skim milk, and 1% Tween-80 for respective amylase, protease and lipase activities. All the halobacterial isolates were cultured in LB with 1 M NaCl by incubating at 37 ∘ C for 24 h with shaking at 200 rpm. The absorbance of the culture was measured at 600 nm and cell density was normalized to 600 = 0.1. Equal number of cells of each strain was spotted and the plates were incubated at 37 ∘ C for 48 hours.
These halophilic isolates were also used for the detection of L-glutaminase production by dye based procedure [14]. All the bacterial cultures were inoculated in medium supplemented with 1% L-glutamine and phenol red pH indicator. The culture tubes were incubated at 37 ∘ C for 48 h.
For visualizing amylase activity, the starch agar plates having bacterial growth were flooded with Gram's iodine solution. The appearance of clear zone around the bacterial colonies indicated the utilization of starch by the halophilic bacteria and thus indicative of the presence of amylase activity. The plates were assessed for protease activity by monitoring the zone of clearance around the bacterial growth. The zone formation around the colony indicates the hydrolysis of casein present in skim milk due to protease production. Bacteria producing lipase exhibited precipitation of Tween-80 around the region of bacterial growth and zone of precipitation around colonies on Tween-80 agar plates confirmed that the isolates produced lipase enzyme.
For each assay, the zone of clearance was measured from three independent experiments and the average values (in cm) are reported with standard deviation. The glutaminase production was assessed by the change in color of medium from yellow to pink.

Preparation of Extracellular Crude Enzyme.
The halophilic isolates producing the respective enzymes were inoculated in LB broth containing 1 M NaCl and cultured at 37 ∘ C for 48 hours. After incubation period, all the cultures were centrifuged at 8000 rpm at 4 ∘ C for 15 min. The cell-free spent medium of the cultures was used to determine the extracellular enzyme activity. Total proteins in cell-free spent medium were estimated by Bradford method [15].

Amylase
Activity. Amylase activity was quantified by Dinitrosalicylic acid (DNS) method using starch as a substrate [16]. 20 g of total protein (cell-free spent medium as extracellular enzyme source) was added to 0.2 mL of 1% starch solution. The reaction mixture was incubated at 37 ∘ C for 30 min and the enzyme reaction was stopped by the addition of 2.0 mL DNS reagent. Further, reaction mixtures were boiled in a water bath for 10 min, cooled at room temperature, and the absorbance was measured at 540 nm. One unit of amylase was defined as the amount of enzyme liberating 1 g of maltose per minute under the assay conditions.

Protease Activity.
Protease activity was measured as described by Kuberan et al. [17]. The reaction mixture containing 1 mL of 1% casein (insoluble) in reaction buffer (50 mM Tris Cl, pH 8.0, and 100 mM NaCl) was mixed with 20 g of protein as crude cell-free enzyme source and incubated at 37 ∘ C for 30 minutes. The reaction was stopped by adding 3 mL of 5% trichloroacetic acid (TCA), followed by centrifugation at 8,000 rpm for 5 min. The supernatant was used for quantification by Lowry's method using tyrosine as a standard by measuring absorbance at 660 nm [18]. One unit of protease activity was defined as the amount of enzyme that liberates 1 g of tyrosine per mL of the reaction mixture per minute under the assay conditions.

Glutaminase
Activity. The glutaminase enzyme activity was measured by estimating the amount of ammonia liberated from glutamine [19]. 20 g of protein as crude cellfree enzyme source was mixed with 0.5 mL of 0.04 M Lglutamine, 0.5 mL of 0.1 M phosphate buffer (pH 7.0), and 0.5 mL of distilled water. The reaction mixture was incubated at 37 ∘ C for 30 min and stopped by adding 0.5 mL of 1.5 M TCA. 0.5 mL of above mixture was taken and added to 3.7 mL of distilled water followed by addition of 0.2 mL Nessler's reagent. The absorbance was recorded at 450 nm and the amount of ammonia liberated was calculated from the standard graph of ammonium sulphate. One unit of glutaminase was defined as amount of enzyme that liberates one micromole of ammonia under assay conditions.

Lipase Activity.
Lipase assay mixture consisted of 0.75 mM para nitrophenyl palmitate (pNPP) and 20 g of crude cell-free enzyme in 0.1 M potassium phosphate buffer of pH 7.0 in a 3 mL reaction volume. Reaction mixture was incubated at 37 ∘ C for 30 min and stopped by adding 1 mL chilled mixture of acetone : ethanol (1 : 1). The absorbance of p-nitrophenol released was measured at 410 nm [20]. The unknown concentration of p-nitrophenol released was determined from the standard graph of p-nitrophenol. One unit of lipase was defined as the amount of enzyme that releases one micromole of p-nitrophenol per minute under assay conditions. Enzyme blank was prepared in all the assays without adding the respective enzyme.

Determination of the Optimal NaCl Concentration, pH,
and Temperature for Enzymes' Activities. Under standard assay conditions described above, the optimal NaCl concentrations, pH, and temperature for each of the enzyme's (amylase, protease, glutaminase, and lipase) activity were determined. To study the effect of NaCl on enzyme activities, enzyme assays were performed at varying NaCl concentrations (0, 0.5, 1, 1.5, 2, and 2.5 M NaCl). Optimal temperature for enzyme activity was determined by incubating the reaction mixture at different temperatures within the range of 20-60 ∘ C. Effect of pH on the different enzyme activity was studied in reaction buffer of varying pH (5)(6)(7)(8)(9)(10)(11). Reaction buffers used include citrate-phosphate buffer (pH 5 and 6), phosphate buffer (pH 7), Tris-HCl buffer (pH 8 and 9), and glycine-NaOH buffer (pH 10 and 11).
All the enzyme assays were repeated at least three times, and the results reported here represent the average from three independent experiments with standard deviation.

Halophilic Bacterial Isolates SS1 and SS3 Have Salt Dependent Halophilic Amylase Activity.
To check the ability of halophilic bacterial isolates for amylase production, starch agar plates having bacterial growth were flooded with Gram's iodine as described above. After flooding with Gram's iodine, a clear zone was observed around the growth of halophilic isolates SS1 and SS3, which indicated the presence of amylase activity. The average diameter of zone of clearance was 1.8 ± 0.5 cm for SS1 and 2.0 ± 0.4 cm for SS3, respectively (Figure 1(a)). In contrast, no zone of clearance was observed for SS2, SS5, and SS8 isolates. E. coli strain DH5 neither exhibited growth nor any amylase activity.

Effect of Salt (NaCl), pH, and Temperature on the Amylase
Activity of Halophilic Bacterial Isolates. Quantitative amylase assay was carried out by DNS method using starch as a substrate and cell-free spent medium as enzyme source as described. Enzyme assay was performed with the amylase producing halophilic bacterial isolates, SS1 and SS3. To study the effect of salt on amylase activity, quantitative amylase assay was performed in reaction buffer containing increasing concentrations of NaCl (0, 0.5, 0.75, 1.0, 1.5, 2.0, and 2.5 M). Halophilic bacterial isolates SS1 and SS3 showed extracellular amylase activity in the presence of 0.5-2 M NaCl, with maximum enzyme activity of 2416 ± 57 U/mg at 1.5 M and 2264 ± 78 U/mg at 1 M NaCl, respectively (Figure 1(b)). Interestingly, no amylase activity was observed in the absence of NaCl (0 M) for both SS1 and SS3, indicating halophilic nature of their amylase activity ( Table 1).
The extracellular amylolytic activity of SS1 and SS3 was assayed at different temperatures ranging from 25 to 70 ∘ C and pH 6-12 in the presence of their optimum NaCl concentration (1.5 M for SS1 and 1 M for SS3). Both the halophilic isolates (SS1 and SS3) showed amylase activity in a pH range of 6-12 and temperature range of 25-60 ∘ C (Figures 1(c) and  1(d)). The optimum pH and temperature for amylase activity of SS1 and SS3 were found to be 8 and 40 ∘ C, respectively (Table 1). Surprisingly, 60-63% amylase activity was retained at pH 12 and 50-52% amylase activity was observed at 60 ∘ C (Figures 1(c) and 1(d)).

The Halophilic Bacterial Isolates SS1, SS2, and SS3 Have
Protease Activity. Most halophilic bacteria are known to secrete proteases into the external environment that can have unique applications in biotechnology. The halophilic isolates were therefore screened for protease production based on the zone of clearance surrounding the growth on skimmed milk agar plates (LB agar medium supplemented with 1 M NaCl and 1% skim milk) at 37 ∘ C as described above. The zone of clearance appears due to the digestion of casein present in skimmed milk by the action of extracellular protease. Halophilic bacterial isolates SS1, SS2, and SS3 were found protease positive, while the isolates SS5, SS8, and E. coli strain DH5 were found to be protease negative (Figure 2(a)). The diameter of zone of clearance of SS1, SS2, and SS3 was 1.9 ± 0.3, 2.5 ± 0.2, and 2.1 ± 0.4 cm, respectively. Therefore, halophilic bacterial isolates SS1, SS2, and SS3 were used to measure their protease activity.

Effect of NaCl, pH, and Temperature on the Protease
Activity of Halophilic Bacterial Isolates. To assess the halo tolerant nature of protease enzyme, quantitative protease assay was performed (as described) in a reaction buffer containing increasing concentrations of NaCl (0, 0.5, 0.75, 1.0, 1.5, 2.0, and 2.5 M). The protease activity of isolate SS1 and SS3 increased with increasing concentration of salt in the reaction, with maximum activity in the presence of 1.5 and 1 M NaCl, respectively (Figure 2(b); Table 1). The maximum protease activity of SS1 and SS3 was 2956 ± 52 and 3178 ± 89 U/mg, respectively (Figure 2(a)). No activity was observed in the absence of NaCl and almost 50% activity was retained at 2 M NaCl. These results indicate that the protease activity of SS1 and SS3 isolates is halophilic in nature. It was observed that bacterial isolate SS2 showed maximum protease activity of 2967 ± 49 U/mg in the presence of 0.75 M NaCl.
The effect of pH and temperature on caseinolytic activity of the enzyme was determined in presence of optimal NaCl concentration. To determine the optimum pH for protease activity, protease assay was carried out in a reaction buffer of varying pH (5)(6)(7)(8)(9)(10)(11)(12). Protease activity of halophilic isolate SS1, SS2, and SS3 was observed between pH 6 and 11. The maximum protease activity was observed at pH 8.0 for SS1 Negative (−) sign indicates no detectable enzyme activity was observed.  Table 1). These results indicate that the extracellular protease from halophilic isolate SS2 was neutrophilic in nature.
To determine the effect of temperature on protease activity, protease assay was performed as described above and incubated at different temperatures (25,30,37,40,50, 60, and 70 ∘ C). The maximum protease activity of SS1 and SS3 isolates was observed at 40 ∘ C, whereas SS2 isolate exhibited maximum protease activity at 37 ∘ C, with 30% activity retained at 60 ∘ C. These results were suggestive of a broad range of temperature for protease activity (Figure 2(d)).

The Halophilic Bacterial Isolate SS2 Exhibits Halotolerant
Lipase Activity. To detect the production of lipase enzymes, the halobacterial isolates (SS1, SS2, SS3, SS5, and SS8) were spotted on LB medium supplemented with 1 M NaCl and 1% Tween-80 as described. Only the halobacterial isolate SS2 produced zones of precipitation that indicates the presence of isolates (SS1, SS2, SS3 and SS4, and SS5 and SS8) was spotted on LB agar medium supplemented with 1% Tween-80 and 1 M NaCl. The plates were incubated at 30 ∘ C for 24 h to visualize lipase activity. Effect of NaCl, pH, and temperature on lipase activity of halophilic isolates: the specific lipase activity (U/mg) of the bacterial isolate Shewanella algae SS2 was plotted against the different concentrations of sodium chloride (NaCl) (b), varying pH (c), and temperature (d) as indicated. In each panel, the data represent an average of three independent experiments with standard deviation. lipase activity (Figure 3(a)). On the other hand, E. coli strain DH5 failed to grow in the medium supplemented with NaCl.

Effect of NaCl, pH, and Temperature on the Lipase Activity of Halophilic Bacterial Isolate.
To assess the halo tolerant nature of lipase activity of SS2 isolate, quantitative enzyme assay was carried out in a reaction buffer containing increasing concentrations of NaCl (0-2.5 M) as described. Enzyme activity was determined by using pNPP as substrate. The halophilic bacterial isolate SS2 showed maximum lipase activity of 4327 ± 92 U/mg in the presence of 0.75 M NaCl, and the lipase activity decreased with increase in NaCl concentration above 0.75 M NaCl (Figure 3(b)).
The effect of pH and temperature on lipase activity was determined in presence of optimal NaCl concentration. Maximum lipase activity of SS2 isolate was observed at pH 7.0 and temperature 37 ∘ C (Figures 3(b) and 3(c); Table 1). At pH 12, there was a drastic decrease in lipase activity and only 23-27% of lipase activity was retained (Figure 3(c)). The maximum lipase activity of isolate SS2 was observed at 37 ∘ C, with 65-72% activity retained at 60 ∘ C (Figure 3(d)). These results indicate that lipase enzyme is active over a wide range of temperature.

All the Halophilic Bacterial
Isolates Except SS1 Exhibit Glutaminase Activity. As glutaminase is an industrially important enzyme, therefore, the halophilic bacterial isolates were screened for glutaminase production as described above. All the halophilic bacterial isolates, except SS1 showed change in color of medium from yellow to pink (Figure 4(a)). These results indicate that these isolates are positive for glutaminase activity. in NaCl concentration up to 1 M NaCl (Figure 4(a)). The maximum specific glutaminase activity of bacterial isolates SS2, SS3, SS5, and SS8 at 1, 2.5, 1.5, and 0.75 M NaCl was 68±3, 79 ± 4, 55 ± 3, and 41 ± 2 U/mg, respectively. Interestingly, glutaminase activity of SS3 increased with increase in NaCl concentration up to 2.5 M NaCl (Figure 4(b)). The optimum pH for glutaminase activity of bacterial isolate SS3 and SS5 was pH 8 (Figure 4(c)). Maximum glutaminase activity of SS2 and SS8 was observed at pH 7 (Figure 4(d)). The optimum temperature for glutaminase activity of SS3 and SS5 was 40 ∘ C, while it was 37 ∘ C for SS2 and SS8 (Table 1). More than 25% glutaminase activity of halophilic bacterial isolates was retained at pH 11 and temperature 70 ∘ C (Figure 4(d)).

Halozymes Are Produced by Halophilic Bacterial Isolates of Lunsu.
Halophiles are rich sources of enzymes such as protease, amylase, lipase, and xylanases. Collectively, these enzymes are referred to as halozymes, enzymes that exhibit salt tolerant or salt dependent catalytic activity. In the present study, the five halophilic bacterial isolates were found to produce one or more halozymes like amylase, protease, lipase, and glutaminase. In a hypersaline lake of Iran, Rohban et al. reported the ability of halophilic strains to produce different extracellular hydrolases (lipase, amylase, protease, xylanase, DNase, inulinase, pectinase, cellulase, and pullulanase) [21].
Virgibacillus sp. strain JS5 isolated from the Arabian soil of west coast of Karnataka, India, exhibited potential to produce the extracellular enzymes such as amylase, protease, inulinase, and gelatinase [22]. Amylases are important component of several industries. Halophilic amylase offers an additional potential of being salt tolerant. In this study, SS1 and SS3 exhibited halophilic amylase activity, which required the presence of at least 0.5 M NaCl for enzyme activity. In quantitative assays, it was found that amylase activity of halophilic isolates SS1 and SS3 was highest in the presence of 1.5 and 1 M NaCl, respectively. This is an attractive property for saline waste water treatment containing starch residues in the presence of high salt. Moreover, no amylase activity was observed below 0.5 M NaCl. Optimum temperature and pH for amylase activity of SS1 and SS3 was 40 ∘ C and pH 8, respectively. Coronado et al. reported the optimum temperature of the -amylase produced by Halomonas meridiana to be 37 ∘ C [23]. Halobacillus sp. strain MA-2 was found to exhibit maximum amylase activity in the presence 1 M NaCl, and the optimum pH and temperature for enzyme activity was 7.5 and 50 ∘ C, respectively. A moderately halophilic strain LY9 with amylolytic activity was isolated from soil sample collected from Yuncheng, China. The enzyme showed optimal activity at 60 ∘ C, pH 8.0, and 2 M NaCl [24].
Halophilic/halotolerant protease enzymes are advantageous in industrial processes where the concentrated salt solution used will inhibit the nonhalophilic protease activity. Amongst an array of five halophilic bacterial isolates of Lunsu, halophilic bacterial isolates SS1, SS2, and SS3 exhibited extracellular proteolytic activity. Maximum protease activity of SS1 and SS3 was observed in the presence of 1-1.5 M NaCl, whereas SS2 showed maximum protease activity in presence of 0.75 M NaCl at pH 7. The presence of salt tolerant protease activity has been reported for Halobacterium halobium, Natrialba magadii, and Natronococcus occultus [25][26][27]. In another study, caseinolytic activity of the Halobacillus karajensis strain MA-2 was found to be optimal at temperature 50 ∘ C, pH 9.0, and 0.5 M NaCl [28]. In another study, optimum protease activity of a haloalkaliphilic bacteria S5 isolated from saline habitat of coastal Gujarat, India, was observed at 1.8 M NaCl and pH 9-9.5 [29]. Thus, comparison of the results from our study with the existing literature revealed that protease produced by halophilic bacterial isolates SS1 and SS3 exhibit the best halotolerance, being active up to 1.5 M NaCl.
Owing to their ability to function in the presence of organic solvents, halophilic lipases are advantageous as lipase mediated catalysis occurs at interface of aqueous and organic layers. Since lipases are advantageous for several applications, the halophilic bacterial isolates of Lunsu were explored for lipase production. SS2 isolate was found to possess extracellular lipase activity.
The optimum salt concentration, pH, and temperature for lipase activity of bacterial isolate SS2 were 0.75 M NaCl, pH 7.0, and temperature 37 ∘ C, respectively. Moderate halophiles of the genera Bacillus and Staphylococcus isolated from Maharlu salt lake in Iran were reported positive for lipase activity [30]. Extreme halotolerant lipase was also reported from Haloarcula marismortui [31,32]. A halophilic strain Chromohalobacter sp. LY7-8 with high lipolytic activity was isolated from salt lake of Yuncheng, China [33]. The enzyme showed optimal activity at 60 ∘ C, pH 9.0, and 2.1 M NaCl. Similarly, halophilic lipase from the halotolerant Staphylococcus warneri PB233 showed optimum pH of 7.0 and temperature of 40 ∘ C for its activity. It was stable between pH 7.0 and 9.0 and temperature of 30-40 ∘ C. The purified lipase showed maximum activity in the presence of 2.5 M NaCl, indicating its halophilic nature [34]. Thus, the halophilic bacterial isolate SS2 can be exploited for production of halotolerant extracellular lipase.
Glutaminases, in general, exhibit activity in the presence of high concentration of salt. Halophiles can be a valuable source of glutaminase, owing to their production of halozymes. In the present study, halophilic bacterial isolates SS2, SS3, SS5, and SS8 exhibited the ability to secrete extracellular glutaminase with diverse properties. The glutaminase activity of halophilic bacterial isolates SS2, SS3, SS5, and SS8 was found to be salt tolerant, and the enzyme remained functional in the presence of 2.5 M NaCl. In addition, the haloenzyme glutaminase also showed activity in the presence of wide range of pH (6)(7)(8)(9)(10)(11) and temperature (25-50 ∘ C).
Glutaminase from Stenotrophomonas maltophilia NYW-81 was found to be stable in the presence of 2.6 M NaCl at pH 8 [35]. About 50% of enzyme activity was retained at 70 ∘ C, for 10 min. L-Glutaminase obtained from Aspergillus oryzae showed optimum activity at temperature range of 37-45 ∘ C and lost its activity at 55 ∘ C [36]. The marine Micrococcus luteus K3 was reported to have glutaminase activity at pH 8.0, temperature of 50 ∘ C, and 1.5-2 M NaCl [37]. Although glutaminase has been studied in fungi and other mesophilic bacteria, very few reports exist on glutaminase from halophiles. In this context, the halophilic bacterial isolates of Lunsu serve as a novel source of glutaminase from the halophilic domain.

Conclusion
The cost effective extracellular enzymes produced by halophilic isolates of Lunsu have great economical potential in industrial, agricultural, chemical, pharmaceutical, and biotechnological applications. The combined hydrolytic activity of some halophilic bacterial isolates can be used for bioconversion of organic materials to useful products in hypersaline or polluted environments. Owing to their ability to remain functional in extreme conditions such as high temperatures, wide range of pH, and high salt concentrations, the halozymes isolated in this study offer important biotechnological potential.