Computational Intelligence and Neuroscience
Volume 2017 (2017), Article ID 3105053, 8 pages
https://doi.org/10.1155/2017/3105053

Research Article

A Novel Active Semisupervised Convolutional Neural Network Algorithm for SAR Image Recognition

Fei Gao,¹ Zhenyu Yue,¹ Jun Wang,¹ Jinping Sun,¹ Erfu Yang,² and Huiyu Zhou³

¹Electronic Information Engineering, Beihang University, Beijing 100191, China
²Space Mechatronic Systems Technology Laboratory, Department of Design, Manufacture and Engineering Management, University of Strathclyde, Glasgow G1 1XJ, UK
³School of Electronics, Electrical Engineering and Computer Science, Queen’s University, Belfast BT7 1NN, UK

Correspondence should be addressed to Jun Wang; wangj203@buaa.edu.cn

Received 5 May 2017; Revised 9 August 2017; Accepted 23 August 2017; Published 1 October 2017

Academic Editor: George A. Papakostas

Copyright © 2017 Fei Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

Convolutional neural network (CNN) can be applied in synthetic aperture radar (SAR) object recognition for achieving good performance. However, it requires a large number of the labelled samples in its training phase, and therefore its performance could decrease dramatically when the labelled samples are insufficient. To solve this problem, in this paper, we present a novel active semisupervised CNN algorithm. First, the active learning is used to query the most informative and reliable samples in the unlabelled samples to extend the initial training dataset. Next, a semisupervised method is developed by adding a new regularization term into the loss function of CNN. As a result, the class probability information contained in the unlabelled samples can be maximally utilized. The experimental results on the MSTAR database demonstrate the effectiveness of the proposed algorithm despite the lack of the initial labelled samples.

1. Introduction

Synthetic aperture radar (SAR) has wide applications in both military and civilian fields due to its merits, such as strong penetrating ability and adaption to severe weathers. SAR automatic target recognition technology (SAR-ATR) aims at automatically recognizing the targets from SAR images [1]. With an increasing amount of the data acquired by a SAR imaging system, the SAR-ATR has become one of research hotspots.

Traditional machine learning methods for the SAR-ATR include Support Vector Machine (SVM) [2], local texture feature [3, 4], dictionary learning [5, 6], and sparse representation [7]. These methods have produced some promising results, but they heavily rely on the hand-crafted feature extraction [8]. Because of the imaging nature, clutters and speckling noise exist in the SAR images, which increases the difficulty of feature extraction despite the fact that experts are involved.

In recent years, with the development of deep learning techniques, CNN has received a great attention in object recognition [9–11]. It can automatically extract the target features without experts’ intervention. Compared with the traditional machine learning methods, the CNN is more effective and robust and has been successfully applied to SAR image recognition. In [12], a CNN method was proposed for improving the SAR image classification accuracy. The experimental result showed that the CNN method outperforms the Gabor feature extraction-based SVM method, which demonstrated a great potential of the CNN for SAR image recognition. A convolutional network was designed in [13] to automatically extract the features for SAR target recognition. Using the learned convolutional features, the accuracy of 84.7% was achieved on the 10 types of targets in the MSTAR dataset. Zhou et al. [14] studied the application of the Deep Convolutional Neural Networks (DCNN) in the polarimetric SAR image classification, in which the hierarchical spatial features of images could be automatically learned by the DCNN and the classification accuracy was improved significantly.

As can be found, the CNN has made a great breakthrough in the SAR image recognition. However, the sample labelling for SAR image is still time-consuming, and the accuracy of the image recognition decreases quickly when the labelled samples are insufficient. Active learning (AL) can be effective by adding the most informative and reliable unlabelled samples into the labelled training set. As a result, it would be a promising way to solve the above-mentioned problem. Wang et al. proposed an AL method for the SAR image classification based on a SVM classifier [15]. The most uncertain samples were chosen according to the confidence value, and the experimental results showed that the AL-based method can effectively improve the classification accuracy when the labelled samples are insufficient. Babaee et al. presented an active learning method by employing a low-rank classifier as the training model. This method selects the samples whose labels are predicted wrong but the classifier is highly certain about them, namely, the first certain wrong labelled (FCWL) selection criteria [16]. Samat et al. reported an active extreme learning machine (AELM) method for the polarimetric SAR image classification. In this method, the class supports based on the posterior probability are utilized as the selecting criterion. According to the experimental results, the proposed method was faster than the existing techniques in the both learning and classification phases [17].

Active learning method effectively adds the most informative and reliable unlabelled samples into the training set. The remaining samples may be less informative and the use of active learning may cause too much computational complexity. However, the information contained in them can be used to improve the generalization ability of the classification algorithm. Semisupervised learning (SSL) is an effective way to utilize the information contained in the unlabelled samples. The commonly used SSL methods include semisupervised SVM [18], label propagation [19], and semisupervised clustering. Recently, SSL has been successfully applied in the SAR image recognition. Duan et al. introduced a semisupervised classification method incorporating the likelihood space approach in the training and testing processes so that the unlabelled samples can be effectively used to improve the classification performance [20]. To overcome the complexity of data and the difficulty of creating a fine-level ground truth, a semisupervised method for ice-water classification based on self-training was presented in [21]. By integrating the spatial context model, the region merging, and the self-training technique, the proposed algorithm is capable of accurately distinguishing ice and open water in SAR images using a very small number of labelled samples. In [22], the unlabelled samples were analysed by an unsupervised clustering algorithm under the usage of all the available information. Besides, each sample was classified by a supervised method using the available information at the current phase of clustering. The experimental results on the SAR image showed that the proposed semisupervised method leads to promising classification results.

Recently, inspired by the superiority of CNN, AL, and SSL, the combination of the three methods has become a research tendency. For example, a deep active learning method and a semisupervised CNN were constructed [23–25]. The experimental results demonstrated the effectiveness of these methods for hyperspectral or optical image recognition. However, we have seen a number of problems from SAR images, for example, difficult feature extraction, time-consuming sample labelling, and insufficient labelled samples. The developed techniques are rarely applied to SAR image recognition. In this paper, a novel active semisupervised CNN algorithm for SAR image recognition is proposed. First, the most informative and reliable samples selected by the active learning method are labelled using an information entropy criterion. We believe that the information entropy can be used to effectively measure the reliability of the unlabelled samples, and it can be calculated based on the output of the CNN framework. Then, the class probability information of the remaining unlabelled samples is obtained from the output of the softmax layer of the CNN. Afterwards, the class probability information is designed as the regularization term and added to the loss function of the CNN for the retraining purpose. Since the class probability information can effectively control the impact of the unlabelled samples in the training process, the unlabelled samples are well utilized at this stage.

The rest of this paper is arranged as follows. In Section 2, the convolutional neural network is briefly introduced. Section 3 describes the proposed method in detail. Then experiments are performed in Section 4. Finally, we summarize this paper in Section 5.

2. Convolutional Neural Network

As a multilayer neural network structure, CNN is mainly composed of an input layer, a convolution layer, a pooling layer, and an output layer, where both the convolution and pooling layers are hidden. The input layer is used to receive the pixel values from the original image. The convolution layer extracts the image features by utilizing the convolution kernel. The pooling layer uses local image correlation to reduce the amount of data to be processed. The output layer maps the extracted features to the corresponding labels. The training of the CNN is composed of two ways: forward and backward propagation.

2.1. Forward Propagation

The mapping process of an image in the CNN is a forward propagation process, where the output of a previous layer is taken as the input of the current layer. In order to provide a full version of the linear model, a nonlinear activation function is added to the neurons of each layer in the mapping process. Since the first layer only receives pixel values from the image, there are no activation functions. From the second layer of the CNN, the nonlinear activation functions are employed. The output of each layer can be expressed as follows:

where denotes the layer. If , is the pixel value matrix of the image. If , represents the feature map matrix , which is extracted from the layer, that is, . , , and represent the weight matrix, the bias matrix, and the weighted input of the layer, respectively; is the nonlinear activation function, and a rectified linear unit (Relu) is selected in this paper. Suppose ; the layer is the output layer, and denotes the final output vector.

2.2. Backpropagation

The standard backward propagation (BP) algorithm is used to update the parameters and of the CNN [10]. The BP algorithm is a supervised learning method which firstly constructs a cost function based on the actual and the expected outputs, and then a gradient descent method (GD) is used to update and along the gradient descent direction of the cost function. In detail, we suppose represents the cost function of the CNN structure. The error vector of the output layer can be expressed as follows:

In the process of backward propagation, the error vector of the layer can be derived from the error vector of the output layer. Thus, the error vector for each layer can be computed by the Chain Rule as follows:

where the symbolic is the Hadamard product (or Schur product) which denotes the element-wise product of the two vectors. The gradients of and are denoted by and , respectively. The partial derivative of to and can be calculated using (1) and (3):

The change values of and can be calculated by

where represents the learning rate.

2.3. The Output Layer

If the number of neurons in the output layer is N, the CNN eventually divides the input images into categories. In the forward propagation process, the input of the output layer is , since the output of the softmax activation function provides the probability of each class to which a sample belongs. Thus, unlike the middle layer of the CNN, we use the softmax activation function instead of the Relu function in the output layer, which is the key in our proposed method. The output is normalized by the softmax function, which can be expressed as

where is the output of the th neuron in the output layer and is the parameter of the softmax function. It is obvious that , and if one item increases, all the other items will decrease accordingly.

3. The Proposed Method

First, we define the symbols to be used in this section. The training dataset is composed of two parts: , where represents the set of the labelled samples and represents the set of the unlabelled samples. is the total number of the training samples. The training process of the proposed methods is composed of two stages. As shown in Figure 1, first, the most informative and reliable samples selected by the active learning method are labelled based on the information entropy. Then the class probability information extracted from the remaining samples is designed as a regularization term, which will be added to the loss function of the CNN for retraining. When the training process has finished, the unlabelled samples go to the CNN and obtain the labels which can be calculated from the softmax layer of the CNN.

Figure 1: The flowchart of the training process of the proposed algorithm.

3.1. Active Learning

To improve the robustness of the classification model when there are insufficient labelled samples, it is necessary to extend the initial training set. Especially for the CNN model with a large number of parameters, the model will be overfitting and weak in generalization if the labelled samples are inadequate. Thus, an active learning method is utilized to increase the number of training samples.

The CNN model employed in this paper is shown in Figure 2, where Conv, Max pool, and Flatten represent the convolution layer, the subsampling layer, and the fully connected layer, respectively. First of all, CNN is trained using the initially labelled samples. After that, the unlabelled samples go into the CNN, and the information entropy of each unlabelled sample is calculated using the output of the softmax layer. The information entropy measures the uncertainty of the samples. The greater the value of the information entropy is, the greater the uncertainty of a sample is. In other words, if the sample is closer to the classification plane, the probability of the sample belonging to a specific category is more uniform.

Figure 2: The CNN model employed in this paper.

The probability of each class to which a sample belongs is represented by , which can be obtained by (6). Then, the information entropy of the unlabelled sample can be calculated by

To extract the most informative samples, the top unlabelled samples with the maximum information entropy are selected and manually labelled. Then they are added to the initial training set. Since the certainty of the samples with small information entropy is high, the labels obtained by the CNN model are considered reliable. Therefore, samples with small entropy are selected and labelled with the CNN. Then these samples are added to the initial training set as well. At this point, the training set is expanded.

Since the initial set of the labelled samples is small, the ability of a CNN model to measure the uncertainty of the samples is weak, which may cause a large deviation. Thus, instead of selecting samples, it is more reasonable to select in an iterative manner. At the beginning of the training process, the epochs are small because the labelled samples are insufficient. With the increase of the training set, the epochs of the CNN can be increased gradually. In this paper, we select the epochs according to the following rule:

where denotes the iterations of the active learning algorithm and denotes the epochs of the CNN during each iteration.

When a certain number of the unlabelled samples have been selected manually, the remaining samples are supposed to be reliable. If we continue selecting the unlabelled samples based on the active learning method, the improvement of generalization ability and the classification accuracy of the CNN is not ensured. Thus, after a certain number of the unlabelled samples are manually labelled, the iteration should be terminated. The main drawback of the CNN is that the training process costs too much time. In order to achieve a trade-off between the number of the unlabelled samples and the complexity of the algorithm, the iterations should be chosen appropriately.

3.2. Semisupervised Learning

Although the uncertainty of the remaining unlabelled samples is not significant, the class probability information contained in the samples can be used to improve the generalization ability of the CNN. We design a regularization term based on the class probability information of the unlabelled samples, which is added to the loss function of the CNN. The commonly used cost functions for the CNN include quadratic cost function, cross-entropy cost function, and log likelihood cost function. When the softmax layer is used as the output layer, the log likelihood cost function is simple and effective. The expression of the log likelihood cost function is as follows:

where represents the output of the th neuron in the output layer corresponding to the input sample and represents the expected value of the th neuron. and denote the actual vector and the expected vector output from the softmax layer, respectively.

The maximum class probability output from the softmax layer is used to design the regularization term. The maximum output of the softmax layer relevant to the unlabelled input sample is expressed as follows:

The regularization term of the unlabelled samples is expressed by

where denotes the label of the unlabelled samples assigned by the CNN. plays the role of a constraint. A higher value of indicates that the sample plays a more important role in the training process of the CNN model. After introducing the regularization term of the unlabelled samples, we have the cost function as follows:

where is the weighting parameter.

For , the error vector of the output layer is

For , the error vector of the output layer is

According to (1), (13), and (14), the sensitivity of the modified cost function can be obtained as

As the error vector of the output layer is obtained, the sensitivity of each layer can be calculated using (3) iteratively, and the parameters of each layer can be updated according to (4) and (5).

4. Experiment

We perform experiments on the Moving and Stationary Target Acquisition and Recognition (MSTAR) database, which is cofunded by National Defense Research Planning Bureau (DARPA) and the US Air Force Research Laboratory (AFRL). Ten types of vehicle targets in the MSTAR database are chosen in our experiment, that is, 2S1, ZSU234, BMP2, BRDM2, BTR60, BTR70, D7, ZIL131, T62, and T72. The SAR and corresponding optical images of each type are shown in Figure 3. Table 1 lists the detailed information of target chips involved in this experiment.

Table 1: The training and testing set of our experiment.

Type
Tops
Model
Training set
Testing set

Depression
Number
Depression
Number

2S1
Artillery
B_01

299

274

ZSU234
D_08

299

274

BRDM2
Truck
E_71

298

274

BTR60
K10YT_7532

256

195

BMP2
SN_9563

233

195

BTR70
C_71

233

196

D7
92V_13015

299

274

ZIL131
E_12

299

274

T62
Tank
A_51

299

273

T72
#A64

299

274

Sum: 2814
Sum: 2503

Figure 3: SAR images and corresponding optical images of ten types of targets in the MSTAR database.

4.1. The Effectiveness of the Active Learning Method

We select 5% of the samples as the initial labelled training set which is used to train the CNN. Then the active learning method based on information entropy is utilized to expand the labelled training set in an iterative manner. During each iteration, the active learning method manually labels 8 samples with the largest information entropy, and 10 samples with the minimum information entropy are labelled by the CNN. To demonstrate the effectiveness of the active learning method, we compare it with the random selection method in which 8 unlabelled samples are randomly selected and manually labelled during each iteration. The classification accuracy of the above two methods varies with the iterations, as shown in Figure 4. Obviously, the classification accuracy of the active learning method is higher than that of the random selection method. Thus, it validates that the active learning method can select the unlabelled samples more effectively. The selected samples are then added to the labelled training set, which is helpful for improving the classification accuracy.

Figure 4: Classification accuracy of active learning method and random selection method.

4.2. The Effectiveness of Semisupervised Learning Method

After the expansion of the initial labelled training set, the semisupervised learning method is utilized by obtaining the regularization term based on the remaining samples and we then add it to the cost function of the CNN. To demonstrate the effectiveness of the regularization method, we compare it with the method without any regularization. The comparison result is shown in Figure 5. As can be seen, the classification accuracy of the regularization method is higher than those without any regularization. The convergence speed of the regularization method is also faster because the method without any regularization needs 100 epochs for convergence, but the regularization method only needs 80 epochs. Thus, it validates that the regularization method is capable of utilizing the information contained in the unlabelled samples, which is helpful to improve the classification accuracy and the convergence speed of the proposed method.

Figure 5: Classification accuracy of the methods with regularization and without regularization.

4.3. Comparison with Other Methods

In this section, we compare the performance of our method with that of the CNN [13], label propagation (LP) [19], and progressive semisupervised SVM with diversity (PS3VM-D) [18]. The CNN is a fully supervised algorithm which only utilizes the labelled samples to train the classification model. The LP and PS3VM-D are both semisupervised methods. The LP establishes a similar matrix and propagates the label of the labelled samples to the unlabelled samples according to the degree of similarity. The PS3VM-D selects the reliable unlabelled samples to expand the initial labelled training set. The comparison results are shown in Figure 6.

Figure 6: Classification accuracy of different classification methods.

We find that our method outperforms the CNN method significantly when the labelled samples are insufficient, and this is due to our active learning and regularization strategy. The generalization ability of the CNN method is weak due to the small number of the labelled samples. With the increase of the labelled samples, the classification accuracy of the CNN method gradually increases, and ultimately it is the same as our method. Furthermore, the classification accuracy of our method is better than that of the other two semisupervised methods. The LP and PS3VM-D assign pseudolabels to the unlabelled samples; however, if the pseudolabels are wrong, the labels will have a negative influence on the subsequent classifier training process. In contrast, our method utilizes the unlabelled samples by designing a regularization term based on the class probability information; then the regularization term is added to the loss function of the CNN for the retraining purpose. In summary, our method is effective and has a strong generalization ability especially when the labelled samples are insufficient.

5. Conclusion

The CNN has achieved a great success in the field of image recognition. To improve the classification accuracy of the SAR image when the labelled samples are insufficient, a new active semisupervised CNN method has been proposed in this paper. First, we query the most informative and reliable samples by utilizing the active learning method, and then the semisupervised regularization is designed based on the remaining unlabelled samples. The main contributions of this paper are summarized as follows:

(1)We used the active learning method to select the most informative and reliable samples, which are labelled manually and by the CNN, respectively. Thus, the overfitting issue is handled by adding the selected samples to the initial training set.(2)We designed a regularization term based on the class probability information of the unlabelled samples, and then the regularization term is added to the loss function of the CNN for retraining. Hence, the classification accuracy and generalization ability of the CNN were improved effectively.

From the experiment results, we observe that our method is effective and has a strong generalization ability especially when the labelled samples are insufficient; for example, the classification accuracy of our method is 95.7% when the number of the labelled samples is 236, which is apparently higher than the other methods using the same number of the labelled samples.

Conflicts of Interest

The authors declare that they have no conflicts of interest.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (61771027; 61071139; 61471019; 61171122; 61501011; 61671035), the Aeronautical Science Foundation of China (20142051022), and the Preresearch Project (9140A07040515HK01009). Dr. E. Yang is supported in part by the RSE-NNSFC Joint Project (2017–2019) (6161101383) with China University of Petroleum (Huadong). Dr. H. Zhou is supported by UK EPSRC under Grants EP/N508664/1, EP/R007187/1, and EP/N011074/1 and Royal Society-Newton Advanced Fellowship under Grant NA160342.

References

Q. Zhao and J. C. Principe, “Support vector machines for SAR automatic target recognition,” IEEE Transactions on Aerospace and Electronic Systems, vol. 37, no. 2, pp. 643–654, 2001.

W. Middelmann, A. Ebert, and U. Thoennessen, “Automatic target recognition in SAR images based on a svm classification scheme,” in Proceedings of the International Conference on Adaptive and Natural Computing Algorithms, pp. 492–499, Springer, 2007.

Ö. Aytekin, M. Koc, and I. Ulusoy, “Local primitive pattern for the classification of SAR images,” IEEE Transactions on Geoscience and Remote Sensing, vol. 51, no. 4, pp. 2431–2441, 2013.

S. Fukuda and H. Hirosawa, “A wavelet-based texture feature set applied to classification of multifrequency polarimetric SAR images,” IEEE Transactions on Geoscience and Remote Sensing, vol. 37, no. 5, pp. 2282–2286, 1999.

X. Zhan, R. Zhang, D. Yin, and C. Huo, “SAR image compression using multiscale dictionary learning and sparse representation,” IEEE Geoscience and Remote Sensing Letters, vol. 10, no. 5, pp. 1090–1094, 2013.

S. Yang, Y. Zhang, and Y. Han, “Speckle reduction of SAR image through dictionary learning and point target enhancing approaches,” in Proceedings of the 6th International Conference on Radar, RADAR 2011, pp. 1926–1929, October 2011.

G. Dong, G. Kuang, N. Wang, and W. Wang, “Classification via sparse representation of steerable wavelet frames on Grassmann manifold: application to target recognition in SAR image,” IEEE Transactions on Image Processing, vol. 26, no. 6, pp. 2892–2904, 2017.

C. O. Dumitru and M. Datcu, “Information content of very high resolution SAR images: Study of feature extraction and imaging parameters,” IEEE Transactions on Geoscience and Remote Sensing, vol. 51, no. 8, pp. 4591–4610, 2013.

A. Krizhevsky, I. Sutskever, and G. E. Hinton, “Imagenet classification with deep convolutional neural networks,” in Proceedings of the 26th Annual Conference on Neural Information Processing Systems (NIPS '12), pp. 1097–1105, Lake Tahoe, Nev, USA, December 2012.

P. Vasuki, S. Mohamed, and M. Roomi, “Automatic target classification in SAR images by multilayer back propagation neural network,” Research Journal of Applied Sciences, Engineering and Technology, vol. 4, no. 24, pp. 5510–5514, 2012.

K. Simonyan and A. Zisserman, “Very deep convolutional networks for large-scale image recognition,” Computer Science, 2014.

J. Zhao, W. Guo, S. Cui, Z. Zhang, and W. Yu, “Convolutional Neural Network for SAR image classification at patch level,” in Proceedings of the 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, pp. 945–948, July 2016.

S. Chen and H. Wang, “SAR target recognition based on deep learning,” in Proceedings of the 2014 IEEE International Conference on Data Science and Advanced Analytics, DSAA 2014, pp. 541–547, November 2014.

Y. Zhou, H. Wang, F. Xu, and Y. Q. Jin, “Polarimetric SAR image classification using deep convolutional neural networks,” IEEE Geoscience & Remote Sensing Letters, no. 99, pp. 1–5, 2016.

T. Wang, Y. Li, and H. Xiong, “A novel locally active learning method for SAR image classification,” in Proceedings of the Joint 2014 IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2014 and the 35th Canadian Symposium on Remote Sensing, CSRS 2014, pp. 4596–4599, July 2014.

M. Babaee, S. Tsoukalas, G. Rigoll, and M. Datcu, “Visualization-Based Active Learning for the Annotation of SAR Images,” IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 8, no. 10, pp. 4687–4698, 2015.

A. Samat, P. Gamba, P. Du, and J. Luo, “Active extreme learning machines for quad-polarimetric SAR imagery classification,” International Journal of Applied Earth Observation and Geoinformation, vol. 35, pp. 305–319, 2015.

C. Persello and L. Bruzzone, “Active and semisupervised learning for the classification of remote sensing images,” IEEE Transactions on Geoscience and Remote Sensing, vol. 52, no. 11, pp. 6937–6956, 2014.

F. Wang and C. Zhang, “Label propagation through linear neighborhoods,” IEEE Transactions on Knowledge & Data Engineering, vol. 20, no. 1, pp. 55–67, 2007.

R. Duan, W. Jiang, and H. Man, “Semi-supervised image classification in likelihood space,” in Proceedings of the 2006 IEEE International Conference on Image Processing, ICIP 2006, pp. 957–960, October 2006.

F. Li, D. A. Clausi, L. Wang, and L. Xu, “A semi-supervised approach for ice-water classification using dual-polarization SAR satellite imagery,” in Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition Workshops, CVPRW 2015, pp. 28–35, June 2015.

R. Hänsch and O. Hellwich, “Semi-supervised learning for classification of polarimetric SAR-data,” in Proceedings of the 2009 IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2009, pp. III987–III990, July 2009.

Liu P, Zhang H, Eom K B. Active Deep Learning for Classification of Hyperspectral Images. IEEE Journal of Selected Topics in Applied Earth Observations &amp; Remote Sensing, 2016, PP(99):1-13.

K. Wang, D. Zhang, Y. Li et al., “Cost-effective active learning for deep image classification,” IEEE Transactions on Circuits & Systems for Video Technology, no. 1, article 99, 2017.

B. Liu, X. Yu, P. Zhang, X. Tan, A. Yu, and Z. Xue, “A semi-supervised convolutional neural network for hyperspectral image classification,” Remote Sensing Letters, vol. 8, no. 9, pp. 839–848, 2017.