Computational and Mathematical Methods in Medicine
Volume 2015 (2015), Article ID 275045, 9 pages
http://dx.doi.org/10.1155/2015/275045

Research Article

Matrix Factorization-Based Prediction of Novel Drug Indications by Integrating Genomic Space

Wen Dai,¹ Xi Liu,¹ Yibo Gao,¹ Lin Chen,¹ Jianglong Song,¹ Di Chen,¹ Kuo Gao,² Yongshi Jiang,¹ Yiping Yang,¹ Jianxin Chen,² and Peng Lu¹

¹Institute of Automation, Chinese Academy of Sciences, Beijing 100190, China
²Beijing University of Chinese Medicine, Beijing 100029, China

Received 10 December 2014; Accepted 6 May 2015

Academic Editor: Francesco Pappalardo

Copyright © 2015 Wen Dai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

There has been rising interest in the discovery of novel drug indications because of high costs in introducing new drugs. Many computational techniques have been proposed to detect potential drug-disease associations based on the creation of explicit profiles of drugs and diseases, while seldom research takes advantage of the immense accumulation of interaction data. In this work, we propose a matrix factorization model based on known drug-disease associations to predict novel drug indications. In addition, genomic space is also integrated into our framework. The introduction of genomic space, which includes drug-gene interactions, disease-gene interactions, and gene-gene interactions, is aimed at providing molecular biological information for prediction of drug-disease associations. The rationality lies in our belief that association between drug and disease has its evidence in the interactome network of genes. Experiments show that the integration of genomic space is indeed effective. Drugs, diseases, and genes are described with feature vectors of the same dimension, which are retrieved from the interaction data. Then a matrix factorization model is set up to quantify the association between drugs and diseases. Finally, we use the matrix factorization model to predict novel indications for drugs.

1. Introduction

The number of new drugs introduced to the market has significantly declined in the past decade as the procedure of drug approval is time-consuming, costly, and risky. It is estimated that an average of more than $800 million is spent in a time period of 15 years to bring a single drug to market [1]. Therefore, there has been rising interest in alternative drug indication discovery, which is an effective strategy of drug development. It can renew a failed drug or expand the number of indications for a successful one. Besides, this strategy offers the possibility of reducing research and development timelines without increasing risk [2]. The successful stories of a novel indication of a drug for a new condition include Minoxidil, Viagra, Avastin, and Rituxan [3]. However, most of these discoveries are based on serendipity and not systematic analysis.

Recently, many systematic computational techniques have been proposed to generate new hypotheses for additional indications of drugs. Most of the attempts have focused on either drug repositioning or matching drug and disease profiles. Gottlieb et al. retrieved 5 drug-drug similarity measures and 6 disease-disease similarity measures to learn a logistic regression classifier, which performs well in predicting potential drug-disease associations [4]. Iorio et al. utilized transcriptomics to discover new drug mode of action [5]. Li and Lu took advantage of pathway information [6] to infer new uses of existing drugs. Yang and Agarwal selected clinical side effects to undertake systematic drug repositioning [7]. Researchers utilize the rich information from these profiles for the large scale prediction of novel drug indications.

Clearly, the previous research could help reposition a known drug to a new indication. However, most of these methods paid more attention to the creation of explicit profiles of drugs and diseases. For example, Gottlieb et al. prepared five features for drugs and two sets of features for diseases [4] in order to calculate similarities for drugs and diseases, respectively. In fact, it takes time to collect these profiles before establishing the model. Furthermore, the selection of features is not an easy job, which needs lots of domain knowledge and experience.

To get rid of the concerns in preparing substantial profiles for drugs and diseases, we present an alternative means by taking advantage of the interaction data. As we know, matrix factorization is the frequently used technique in collaborative filtering, which predicts user preferences for product by learning past user-item relationships [8]. In fact, previous studies have also adopted interaction data in pharmaceutical sciences. For example, Zheng et al. used matrix factorization to predict effective drug-target interaction from the known ones [9]. Gönen proposed a Bayesian matrix factorization model for predicting drug-target interaction networks [10]. Nevertheless, seldom research focuses on adopting known drug-disease associations in generating matrix factorization models for the prediction of novel drug indications. In this work, we propose a matrix factorization model with the integration of genomic space to detect potential drug-disease associations and predict novel drug indications. Specifically, genomic space here refers to interactions regarding genes, including drug-gene interactions, disease-gene interactions, and gene-gene interactions. The introduction of genomic space can add molecular biological information for predicting drug-disease associations [11]. In fact, genomic topology has also played a role in previous research. Zhao and Li [12] utilized important gene modules to decipher how drugs and diseases are associated in the molecular level. Li et al. [13] employed network interactions in the molecular level to evaluate synergies between drugs. In our work, we use eigenvalue decomposition to calculate feature vectors of genes from gene interaction network. In this way, the topological characteristics of gene interaction network are retrieved for investigation of drug-disease associations.

The workflow of our strategy is illustrated in Figure 1; low-rank feature vectors of genes are firstly retrieved from gene interaction network by using eigenvalue decomposition. Then feature vectors of drugs and diseases are, respectively, obtained from drug-gene interactions and disease-gene interactions. In this way, the topological characteristics of gene interaction network are fused into the features of drugs and diseases. Afterwards, a matrix factorization model is generated to approximate the known associations between drugs and diseases. The output of the model can be regarded as a measurement of the possibility of association between one certain drug and one certain disease. Finally, the matrix factorization model is used to infer new drug-disease associations and predict novel drug indications. In this paper, we firstly demonstrated the role of genomic space in our strategy by comparing matrix factorization models with genomic space and without genomic space. Then our strategy was compared with three state-of-the-art collaborative filtering tools to demonstrate a better performance of our strategy. With the accumulation of more and more interaction data in the future, we believe that our method would play a greater role.

Figure 1: Strategy pipeline. Firstly, feature vectors of genes are extracted from gene interaction network. Then, feature vectors of the same rank are obtained for drugs and diseases from drug-gene interactions and disease-gene interactions, respectively. Next, a matrix factorization model is generated to reconstruct the known drug-disease associations. Finally, the estimated feature vectors of drugs and diseases are used to infer new drug-disease associations and predict novel drug indications.

2. Methods

2.1. Problem Definition

Let be a given set of drugs, be a given set of diseases, and be a given set of genes, where , , and are the number of drugs, the number of diseases, and the number of genes, respectively. We use to denote the interaction data. Specifically, let be a binary matrix of true labels of drug-disease associations, in which only some entries are known. In the known entries, if drug and disease are known to be associated with each other and if drug and disease are known to be not associated. The other entries are unknown as we are not sure whether they are associated or not. Then we use two binary matrices to represent the associated genes of drugs and diseases: let be a binary matrix of drug-gene interactions, where if drug and gene interact with each other, and otherwise; let be a binary matrix of disease-gene interactions, where if disease and gene interact with each other, and otherwise. Finally, the gene interaction network, consisting of genes, is adopted for exploiting genomic topology. To study the effect of the integration of genomic space, we assume that all the drugs and all the diseases have interacting genes in the gene interaction network.

The goal is to calculate a scoring matrix , which is derived from the known interaction data, to predict scores for the unknown ones in . Specifically, the entry indicates the potential of association between drug and disease .

2.2. Creation of Feature Vectors

The introduction of genomic space is aimed at providing biological information in the molecular level for predicting drug-disease associations. The main idea is to exploit the genomic space to create low-rank feature vectors, which are used to describe the feature spaces of genes, drugs, and diseases. Firstly, we construct a gene interaction network from the gene-gene interactions. The network is composed of a certain number of gene nodes and a set of edges describing the interactions between gene nodes. To extract topology information from the network, the gene closeness metric is proposed. Specifically, for each pair of gene nodes () where and , the gene closeness metric is computed by

where is the shortest distance between and in the network and and are the adjustment parameters. It should be noted that is regarded as infinity when the two gene nodes are unreachable. The gene closeness is used to measure the relationship of two genes that belong to the set . In this way, a gene relation matrix is generated from the genomic space. Afterwards, eigenvalue decomposition [14] of the matrix is applied to construct a unified space, which is a low-rank Euclidian space, so that all the genes can be represented by sets of -dimension feature vectors . The detailed procedure is as follows.

(1)Calculate the eigenvalues, which are arranged in the descending order, and the corresponding eigenvectors of the gene relation matrix .(2)Retrieve the first eigenvalues to form the diagonal matrix ; retrieve the corresponding eigenvectors to form the matrix , where each column is an eigenvector.(3)Calculate the matrix , by which the gene relation matrix can be decomposed as .(4)Represent all the genes by using the row vectors of the matrix .

In this way, the characteristic of gene interaction network is extracted to form the feature vectors which constitute the feature space of genes.

Next, the feature spaces of drugs and diseases are, respectively, obtained according to the interaction matrices and . We calculate the feature vectors of drugs and diseases, denoted as and , respectively, using the following formulae:

After that, feature vectors of genes, drugs, and diseases are integrated into a unified space of the same rank. The assumption under this integration is that the association between drug and disease has its evidence in the gene interaction network. In other words, if a drug is known to be associated with a disease, then targets of the drug might be more highly interconnected with the disease genes in the interactome network.

2.3. Generation of Matrix Factorization Model

The intuition behind the proposed matrix factorization model is that there should be some latent features that determine how drugs and diseases are associated. As illustrated in Figure 1, the matrix is factorized into two low-rank matrices and : a feature matrix of drugs denoted as and a feature matrix of diseases denoted as . In matrix , the th row represents the feature vector of the th drug; in matrix , the th row represents the feature vector of the th disease. To integrate the genomic space, the original states of matrices and are obtained from feature vectors of drugs and diseases, which are extracted from the gene interaction network:

By using , we can reconstruct the known associations between drugs and diseases and predict possibilities for the unknown ones. In order to constrain the output to fall within the range of 0-1, we add a sigmoid active function to the output . Thus, the final model is described as

where is the predicted possibility of the association between the th drug and th disease, making up the scoring matrix .

To estimate and in the matrix factorization, we choose to minimize the squared error of the known drug-disease associations. To avoid overfitting of and to the known associations, an regularization is added to the loss function, which can be written as follows:

where is the set of known drug-disease associations and is a regularization coefficient. In the optimization function, is the true label for association between the th drug and the th disease, while is the predicted value for the corresponding drug-disease pair.

To learn the model, we use stochastic gradient descent to estimate and , which minimizes the optimization function. By setting the partial derivative of as and , we obtain the updating rule of and as follows:

where is the difference between the true value and the predicted value and is the learning rate. Algorithm 1 uses pseudocode to show the optimization process of the matrix factorization model with stochastic gradient descent. We stop the training until the model converges to a relatively stable state.

Input: Known drug-disease association set  , learning rate  , regularization coefficient  

Output: Drug feature vectors , disease feature vectors

,  

repeat

    for training sample    do

    end

until the shrinkage of training error is below a user-defined value

Algorithm 1: Algorithm for learning the matrix factorization model.

3. Results

3.1. Preparation of Interaction Data

The interaction data, including drug-disease associations, drug-gene interactions, and disease-gene interactions, were firstly manually collected from [4, 15, 16]. Then two genes are considered to be interacted if their products interact with each other in the protein-protein interaction network, which is retrieved from HPRD database [17]. In this way, gene-gene interactions were acquired to yield a gene interaction network of 36882 unique pairwise binary interactions between 9415 genes. We unified these data sources by using DrugBank ID to represent drugs, using OMIM ID to represent diseases, and using Entrez Gene ID to represent genes. To meet the requirement that all drugs and diseases in the drug-disease associations should have interacting genes in the gene interaction network, we examined the drug-disease associations and kept the ones in which both the drug and the disease have interactors in the 9415 genes. In this way, 213 drug-disease associations involving 130 drugs and 50 diseases were kept. Besides, 776 drug-gene interactions concerning the 130 drugs and 74 disease-gene interactions concerning the 50 diseases were left. In total, there were 994 distinct genes in these interactions. The following research was carried out based on these data.

3.2. Establishment of Our Model

To extract topology information from gene interaction network, gene closeness metrics were computed for the 994 genes based on the interactome network of 9415 genes to form a gene relation matrix. During the computation, we set and to make the values of gene closeness relatively evenly distributed. It should be pointed out that the selection of and is not a key issue in the research, as it is a simple transformation of the values and has a limited influence on our method. The matrix was used to extract feature vectors of the 994 genes. Then features of drugs and diseases were retrieved according to the drug-gene interactions and disease-gene interactions. Next, training set of drug-disease pairs was prepared beforehand. The positive set was made up of the 213 known drug-disease associations. The negative set was generated by randomly combining drugs from the 130 drugs and diseases from the 50 diseases. As the number of interacting drug-disease pairs is significantly fewer than noninteracting pairs in practical situations, the negative set was twice as large as the positive set. Then we performed a 10-fold cross-validation procedure in matrix factorization: the training samples were randomly split into 10 subsets of roughly equal size; each subset was in turn taken as the test set. The performance was evaluated by plotting a receiver operating characteristic (ROC) curve for the test set and calculating the Area under the ROC Curve (AUC). We repeated the cross-validation experiment independently for 5 times, in each of which a different random partition of the samples to 10 subsets was used, and took the average to obtain a robust AUC score estimate.

In the training, two coefficients have to be determined firstly: regularization coefficient and learning rate. Models based on different coefficients were set up and measured according to the performance of AUC. As illustrated in Figure 2, regularization coefficient exerts a large influence on the model, while learning rate has a relatively marginal effect. Smaller regularization coefficient means a better fitting of the training samples, while larger regularization would penalize more on overfitting. An appropriate regularization coefficient is chosen to reach a compromise between training error and generalization ability. Learning rate has a limited influence on the model. The performance decreases insignificantly with the increase of learning rate. Thus, a larger learning rate is preferred as it indicates a shorter training time. Finally, regularization coefficient was set as 2⁻⁷, and learning rate was set as 2⁻⁴.

(a)

(b)

Figure 2: The AUC results of models based on different penalization and learning rate. (a) Learning rate remains the same, while penalization coefficients increase twofold each time. (b) Penalization coefficient remains the same, while learning rate increases twofold each time.

It should be noted that the dimension of feature vectors, denoted by , was set as 8 in the previous experiment. However, it is not a requirement. As the feature vectors were extracted from eigenvalue decomposition of the gene relation matrix, can be set as any value from 1 to 994. As illustrated in Figure 3, we changed the dimension of feature vectors and compared the performances of models. It can be seen that the chosen of does not affect the performance much. Larger value of should lead to less variance from the original data; nevertheless, the increase of AUC is quite small compared to the expansion of feature vectors. Thus, we chose as 32, which results in an acceptable performance. Finally, we note that taking the negative set several times as large as the positive set has a negligible effect on the resulting AUC score, which is demonstrated in Figure 4.

Figure 3: The AUC results of models based on different dimensions. Penalization coefficient and learning rate remain the same.

Figure 4: The AUC results of models based on different folds of negative samples. Penalization coefficient and learning rate remain the same. The dimension of feature vectors is set as 32.

To conclude, we set regularization coefficient as 2⁻⁷, learning rate as 2⁻⁴, and dimension of feature vectors as 32 and set the negative set twice as large as the positive set to generate our model.

3.3. Performance Results

It can be seen that our method is constituted by two main parts: the first part is to construct the feature vectors of genes, drugs, and diseases; the second part is to generate the matrix factorization model. In our method, the topological characteristics of gene interaction network are fused into matrix factorization by extracting feature vectors of genes, drugs, and diseases. To demonstrate the rationale for our method, we firstly compared the performance of our method with the two single parts. As to the first part, we denote it by “FV.” To get rid of matrix factorization, the dot products of feature vectors of drugs and diseases are utilized directly to measure their possibility of association. The detailed procedure is as follows.

(1)Initiate states of the decomposed matrices and with extracted feature vectors from genomic space.(2)Calculate dot products of feature vectors of drugs and diseases to measure their possibility of association.(3)Perform 5 × 10-fold cross-validation and calculate the average AUC as a result.

As to the second part, we denote it by “MF.” The feature vectors of drugs and diseases are randomly initialized to eliminate topological characteristics of gene interaction network. The detailed procedure is as follows.

(1)Randomly initiate states of the decomposed matrices and .(2)Train the matrix factorization model and use it to predict possibility of association between drugs and diseases.(3)Perform 5 × 10-fold cross validation and calculate the average AUC as a result.

The experiments were undertaken on the same cross-validation samples. The results are listed in Table 1. From the results, we can find that the performance of FV is lowest, which suggests that measurement of drug-disease associations which is solely based on gene interaction network is quite savage and impracticable. However, after topological characteristics of gene interaction network are fused into matrix factorization, the AUC result increases from 0.5778 to 0.7508. This exhibits the usefulness of genomic space in improving the performance of matrix factorization and verifies that drug-disease associations have implications in the gene interaction network.

Table 1: Performance of FV and MF.

Our method
FV
MF

AUC
0.7508
0.5264
0.5778

Next, three widely used collaborative filtering tools, libFM [18], SVDFeature [19], and libMF [20] were also applied here, as competing methods, to predict drug-disease associations.

libFM transforms the drug-disease association into the form of -dimensional feature vector with its corresponding target . Then a factorization machine is generated as follows:

where the model parameters that have to be estimated are , , and . A row within describes the th variable with factors. Finally, the output of the factorization machine can be used to predict possibility of association between novel drug-disease pairs.

SVDFeature extracts bias information and latent variables from drug-disease associations. For drugs, bias item and latent feature vector are estimated. For diseases, bias item and latent feature vector are estimated. Global bias is estimated as . Global mean value is denoted by . Other input includes for drug feature, for disease feature, and for global feature. Finally, the association between drug and disease is calculated as follows:

libMF estimates drug bias (), disease bias (), average term (avg), and latent factors (, ) from the training samples and calculates the novel drug-disease pair as follows:

We evaluated the predictive performance of the four methods in three settings: pair prediction, drug prediction, and disease prediction. In all settings, the negative set was twice as large as the positive set. In pair prediction, 5 × 10-fold cross-validation was performed and the test set was chosen randomly. The average AUC was taken as a result. To test the applicability of our method in predicting indications of new drug candidate compounds associated with no diseases or predicting drugs of orphan diseases, we performed drug prediction and disease prediction. In drug prediction, all the drugs were randomly partitioned into ten subsets of equal sizes. The associations regarding all the drugs in each subset were in turn chosen as the test set. Thus, all the drugs in the test set are outside of the training set. The procedure was repeated 5 times to calculate the average AUC result. Similarly, in disease prediction, all the diseases were randomly partitioned into ten subsets of equal sizes. The associations regarding all the diseases in each subset were in turn chosen as the test set. Also, the procedure was repeated 5 times to obtain the average AUC result. In the experiment, parameters in our method were set as follows: regularization coefficient is set as 2⁻⁷, learning rate is set as 2⁻⁴, and dimension of feature vectors is set as 32. Parameters in libFM were set as those in [18]. Parameters in SVDFeature were set as guided in [21]. Parameters in libMF were set as those in [20].

As illustrated in Table 2, our method outperforms the other three competing methods in all of the three settings. The introduction of genomic space improves the AUC performance, which implicates that the extraction of feature vectors might be quite favorable for the characterization of the topology of gene interaction network. From the comparison, it can be found that our method is reliable in predicting drug-disease associations. Particularly, our method performs better than the competing methods in drug prediction and disease prediction. The relatively bad performance in disease prediction can be attributed to the small quantity of disease-gene interactions. On average, each investigated disease has no more than two interacting genes. However, the performance of our method in disease prediction is still much better than the competing methods, which shows that the topology information from genomic space is effective in relating drugs to diseases in cases where association information of drugs or diseases is rare.

Table 2: AUC values obtained by 5 × 10-fold cross-validation.

Pair prediction
Drug prediction
Disease prediction

libFM
0.7068
0.6637
0.349

SVDFeature
0.5699
0.6403
0.236

libMF
0.5868
0.6557
0.3173

Our method
0.7508
0.7216
0.532

3.4. Evaluation on a Larger Dataset

To test the practicability of our method, we relaxed the requirement for preparation of interaction data and performed the experiment once again. On this occasion, a drug-disease association, in which either the drug or the disease has interactors in the 9415 genes, was also kept. In this way, 1076 drug-disease associations involving 398 drugs and 242 diseases were left, among which only 200 drugs and 70 diseases have interacting genes. Besides, 1222 drug-gene interactions concerning the 200 drugs and 97 disease-gene interactions concerning the 70 diseases were left. In total, there were 1059 distinct genes in these interactions. Based on these data, experiments of 5 × 10-fold cross-validations were undertaken for pair prediction, drug prediction, and disease prediction. In all settings, the negative set was twice as large as the positive set. In our method, as the influence of both learning rate and dimension of feature vectors on the performance is limited, the two parameters were set in the same way as that in the previous experiment. As shown in Figure 5, regularization coefficient exerts a larger influence on the performance. Here, the regularization coefficient was chosen as 2⁻⁵. Before training, the feature vectors of drugs and diseases that have no interacting genes were initialized randomly. Specifically, 198 drugs out of 398 and 172 diseases out of 242 were assigned with random feature vectors of the designated rank. Parameters of the three competing methods were set in the same way as that in the previous experiment.

Figure 5: The AUC results of models based on different penalization coefficients. Learning rate remains the same. The dimension of feature vectors is set as 32.

Finally, the results are listed in Table 3. It can be seen that our method still performs better than the competing methods. However, the advantage is not that distinct as in the previous experiment. This is due to the small proportion of drugs (200/398) and diseases (70/242) that have interacting genes. Considering that large amounts of drugs and diseases which have no evidence from the genomic space, the performance of our method is quite remarkable. It can be expected that our method would perform much better when more and more interaction data are accumulated in the future.

Table 3: AUC values obtained by 5 × 10-fold cross-validation.

Pair prediction
Drug prediction
Disease prediction

libFM
0.8078
0.6226
0.3682

SVDFeature
0.7107
0.6069
0.3338

libMF
0.6388
0.6217
0.3878

Our method
0.8147
0.6573
0.5617

4. Discussion

In this work, we proposed a matrix factorization model with the integration of genomic space to detect potential drug-disease associations and predict novel drug indications. Feature vectors of genes, drugs, and diseases were firstly retrieved from genomic space. In this way, the topological characteristics of gene interaction network were fused into the matrix factorization model.

We collected a set of pairwise binary interactions between genes to construct the gene interaction network. Based on the distances in the network, we set up the gene relation matrix, which was directly used to extract feature vectors of genes. Afterwards, feature vectors of drugs and diseases were obtained according to the interacting genes of them. Next, we adopted the matrix factorization model, which generates two low-rank matrices to reconstruct the known drug-disease associations. To constrain the output to fall within the range of 0-1, we added a sigmoid active function to the output. Stochastic gradient descent was used to learn the model, which was then employed in the prediction of novel drug-disease associations.

From the performance of FV and MF in Table 1, we can see that the incorporation of topological information of genomic space by initiating states of the decomposed matrices and with extracted feature vectors is effective. In a mathematical sense, this might be attributed to sensitivity of the model to the starting points during the training; and this might be the reason why the proposed model improves the predictive ability. Further investigation will be undertaken in our later work.

To date, most of the research relies on matching drug and disease profiles to detect potential drug-disease associations. Nevertheless, it takes time to prepare so many profiles for large amount of drugs and diseases. On the contrary, our method takes advantage of interaction data and is free of calculating profiles of drugs and diseases. It should be noted that our method is more tractable and applicable as the interaction data can be easily obtained from public database and directly employed to predict novel drug indications. Furthermore, our method relieves us of the bother of selecting appropriate combinations of features for drugs and diseases.

One major limitation of our method is that it relies heavily on the richness of interaction data. The availability of drug-gene interactions and disease-gene interactions is a key point for accurate measurement of feature vectors of drugs and diseases. In our research, the performance of our method has been affected by the small scale of interaction data, especially disease-gene interactions. However, it is not an unattractive option for the reason that it gets rid of the bother of selecting and collecting profiles for drugs and diseases; and the evaluation on the larger dataset has proven its validity in relatively large scale data, as the performance is acceptable even if large amounts of drugs and diseases have no interacting genes on that occasion. With the accumulation of more and more interaction data in the future, we believe that our method would play a much greater role in the prediction of novel drug indications.

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.

Acknowledgment

This work was supported by National Science Foundation (Grant nos. 81330086, 81303152, and 81173463,), New Century Excellent Talent support plan of the ministry of education (NCET-12-0804), and Beijing Nova Program (Grant no. xx2013032).

References

C. P. Adams and V. van Brantner, “Estimating the cost of new drug development: is it really $802 million?” Health Affairs, vol. 25, no. 2, pp. 420–428, 2006.

T. T. Ashburn and K. B. Thor, “Drug repositioning: identifying and developing new uses for existing drugs,” Nature Reviews Drug Discovery, vol. 3, no. 8, pp. 673–683, 2004.

J. T. Dudley, T. Deshpande, and A. J. Butte, “Exploiting drug–disease relationships for computational drug repositioning,” Briefings in Bioinformatics, vol. 12, no. 4, pp. 303–311, 2011.

A. Gottlieb, G. Y. Stein, E. Ruppin, and R. Sharan, “PREDICT: a method for inferring novel drug indications with application to personalized medicine,” Molecular Systems Biology, vol. 7, article 496, 2011.

F. Iorio, R. Bosotti, E. Scacheri et al., “Discovery of drug mode of action and drug repositioning from transcriptional responses,” Proceedings of the National Academy of Sciences of the United States of America, vol. 107, no. 33, pp. 14621–14626, 2010.

J. Li and Z. Lu, “Pathway-based drug repositioning using causal inference,” BMC Bioinformatics, vol. 14, supplement 16, article S3, 2013.

L. Yang and P. Agarwal, “Systematic drug repositioning based on clinical side-effects,” PLoS ONE, vol. 6, no. 12, Article ID e28025, 2011.

R. Bell, Y. Koren, and C. Volinsky, “Modeling relationships at multiple scales to improve accuracy of large recommender systems,” in Proceedings of the 13th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining (KDD '07), pp. 95–104, ACM, August 2007.

X. Zheng, H. Ding, H. Mamitsuka, and S. Zhu, “Collaborative matrix factorization with multiple similarities for predicting drug-target interactions,” in Proceedings of the 19th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, pp. 1025–1033, Chicago, Ill, USA, August 2013.

M. Gönen, “Predicting drug-target interactions from chemical and genomic kernels using Bayesian matrix factorization,” Bioinformatics, vol. 28, no. 18, pp. 2304–2310, 2012.

W. Kong, J. Zhang, X. Mou, and Y. Yang, “Integrating gene expression and protein interaction data for signaling pathway prediction of Alzheimer's disease,” Computational and Mathematical Methods in Medicine, vol. 2014, Article ID 340758, 7 pages, 2014.

S. Zhao and S. Li, “A co-module approach for elucidating drug-disease associations and revealing their molecular basis,” Bioinformatics, vol. 28, no. 7, pp. 955–961, 2012.

S. Li, B. Zhang, and N. Zhang, “Network target for screening synergistic drug combinations with application to traditional Chinese medicine,” BMC Systems Biology, vol. 5, supplement 1, article S10, 2011.

Y. Yamanishi, M. Araki, A. Gutteridge, W. Honda, and M. Kanehisa, “Prediction of drug-target interaction networks from the integration of chemical and genomic spaces,” Bioinformatics, vol. 24, no. 13, pp. i232–i240, 2008.

Y. Yamanishi, M. Kotera, M. Kanehisa, and S. Goto, “Drug-target interaction prediction from chemical, genomic and pharmacological data in an integrated framework,” Bioinformatics, vol. 26, no. 12, pp. i246–i254, 2010.

X. Wu, R. Jiang, M. Q. Zhang, and S. Li, “Network-based global inference of human disease genes,” Molecular Systems Biology, vol. 4, article 189, 2008.

T. S. Keshava Prasad, R. Goel, K. Kandasamy et al., “Human protein reference Database—2009 update,” Nucleic Acids Research, vol. 37, no. 1, pp. D767–D772, 2009.

S. Rendle, “Factorization machines with libFM,” ACM Transactions on Intelligent Systems and Technology, vol. 3, no. 3, article 57, pp. 1–22, 2012.

T. Chen, W. Zhang, Q. Lu, K. Chen, Z. Zheng, and Y. Yu, “SVDFeature: a toolkit for feature-based collaborative filtering,” The Journal of Machine Learning Research, vol. 13, no. 1, pp. 3619–3622, 2012.

Y. Zhuang, W.-S. Chin, Y.-C. Juan, and C.-J. Lin, “A fast parallel SGD for matrix factorization in shared memory systems,” in Proceedings of the 7th ACM Conference on Recommender Systems (RecSys '13), pp. 249–256, ACM, October 2013.

T. Chen, Z. Zheng, Q. Lu, W. Zhang, and Y. Yu, SVDFeature: User Reference Manual, 2012.