Fuzzy Constrained Predictive Optimal Control of High Speed Train with Actuator Dynamics

We investigate the problem of fuzzy constrained predictive optimal control of high speed train considering the effect of actuator dynamics. The dynamics feature of the high speed train is modeled as a cascade of cars connected by flexible couplers, and the formulation is mathematically transformed into a Takagi-Sugeno (T-S) fuzzy model.The goal of this study is to design a state feedback control law at each decision step to enhance safety, comfort, and energy efficiency of high speed train subject to safety constraints on the control input. Based on Lyapunov stability theory, the problem of optimizing an upper bound on the cruise control cost function subject to input constraints is reduced to a convex optimization problem involving linear matrix inequalities (LMIs). Furthermore, we analyze the influences of second-order actuator dynamics on the fuzzy constrained predictive controller, which shows risk of potentially deteriorating the overall system. Employing backsteppingmethod, an actuator compensator is proposed to accommodate for the influence of the actuator dynamics.The experimental results show thatwith the proposed approach high speed train can track the desired speed, the relative coupler displacement between the neighbouring cars is stable at the equilibrium state, and the influence of actuator dynamics is reduced, which demonstrate the validity and effectiveness of the proposed approaches.


Introduction
High speed railway systems have attracted much attention, since they can provide greater transport capacity, significantly faster speeds, and outstanding features of punctuality when compared to aircraft and autovehicle.In recent years, high speed railways have gone through rapid development in European countries, Russia, Japan, China, and many other developing countries.As the high speed railways networks are becoming more and more complex, many new challenging technical and commercial issues such as reduction of energy consumption, safety, and comfort have been brought up.With the breakthrough in computer control and communication technology, the automatic train control (ATC) system is equipped to automatically supervise the train speed to follow a desired trajectory which also makes it possible to adjust the train operations in a safe and energy-efficient way [1][2][3].
Many scholars and researchers have therefore been searching for the optimal driving strategy over the years.Howlett [4] applied the Pontryagin maximum principle to prove that the optimal sequence of train driving strategy should consist of four phases including maximum acceleration, cruising, coasting, and maximum braking [4][5][6].Therefore, the train driving problem is characterized by the switching locations of stages which can be formally formulated as a nonlinear optimization problem.Furthermore, various algorithms were proposed to determine the optimal cruising speed and the switching locations, for example, genetic algorithm [7], ant colony optimization method [8], and simulated annealing algorithm [9], considering the realworld operation environments such as track gradient and speed limits, commercial punctuality constraints, and the uncertainty of some performance parameters [10,11].
It should be clarified that above methods for automatic train control treated the whole train that consists of multiple cars as a single point mass and approximately characterized its motion by a single mass point Newton equation.Although the single mass point model makes design of the controller much convenient, it overlooks the interactive forces among the connected vehicles which should be explicitly contemplated to achieve satisfactory control performance for a long train.In order to overcome these disadvantages, Gruber and Bayoumi [12] investigated the longitudinal dynamics of multilocomotive powered train and approximated it as a nonlinear mass-spring dashpot model which was interconnected via couplers at the first time.They demonstrated that this method could efficiently minimize the coupler forces which result in safer operation and increased traveling speeds.Zhuan and Xia [13] obtained an open-loop scheduling controller by solving an optimization problem based on the desired trajectory, and closed-loop controller was subsequently presented through local linearization to maintain a steady-state motion of a train [14].Song et al. [15] extended the cascade mass point to model the high speed train under unknown and time varying resistance coefficients and designed robust adaptive control with optimal task distribution for speed and position tracking with traction/braking nonlinearities and saturation limitations.
As the aerodynamic resistance is proportional to the square of the train's speed, the most typical way to handle this case is to linearize or approximate the impacts along a prior scheduled ideal speed [16][17][18].Although this approach simplifies computational complexity, its influence on the train's dynamic behavior becomes increasingly significant as the train speed increases.As a popular control method, the fuzzy logic control has been developing quickly during the past thirty years, where prevailing attention has been devoted to Takagi-Sugeno (T-S) fuzzy model based control for complex nonlinear systems [19][20][21].Taking fuzzy control methods and optimization techniques as alternatives, many research works have been done in the high speed train control and optimization fields [22][23][24].
However, it is worth noting that most existing methods for high speed train control focus on optimizing the operation of a high speed train according to the current information, and future behaviors during the whole travel are usually not taken into consideration.Therefore, these approaches cannot ensure an overall optimized operation of the train during a long trip due to the unfavorable factors such as model inaccuracies, operation constraints, and uneven track profile [25,26].As one of the most powerful directions of the modern control, model predictive control (MPC) can be regarded as a circular operation in which a minimization problem is solved to calculate optimal control for certain time horizon with hard physical constraints [27,28].This feature makes MPC an ideal candidate for optimal cruise control of high speed train too.Moreover, most approaches of high speed train controller design assume that traction/braking dynamics are fast enough to be negligible.However, it turns out that actuators show limited performance in real situations and, accordingly, the control performance would be severely degraded if we design the traction/braking force for the train directly.
Motivated by earlier discussions, the main purpose of this brief is to solve the high speed controller optimization problem which guarantees the various railway operational performances such as safety, energy consumption, riding comfort, and velocity tracking with explicit consideration of input constraints as well as the actuator dynamics.Different from the existing results [18,29], in this paper, T-S fuzzy model which provides a bridge between the analysis of nonlinear systems and the fruitful linear control theory is employed to approximate the nonlinear dynamic model of high speed train.Instead of using conventional open-loop model prediction, this brief proposes a fuzzy constrained predictive controller using a state feedback control scheme to facilitate a finite dimensional formulation for an infinite horizon in closed-loop prediction form.The asymptotical stability and controller synthesis can be explicitly formulated as a convex optimization problem in which the related sufficient conditions of stability are cast into a set of linear matrix inequalities (LMIs) based on Lyapunov function.Furthermore, we analyze the influence of actuator dynamics on the fuzzy constrained predictive controller and design a compensator using backstepping technique [30] to accommodate for the influence of the actuator.
The remainder of this research is organized as follows.Section 2 details the T-S fuzzy model that preserves the nonlinear nature of the high speed train dynamics while, at the same time, facilitating the control design.In Section 3, the fuzzy constrained predictive controller of high speed train is designed and the compensator scheme based on backstepping is introduced.The numerical experiments are implemented in Section 4 for demonstrating the validity and effectiveness of the proposed approaches.Finally, some conclusions and further works are addressed in Section 5.
Some notations are given as follows: (1) The symbol * in a matrix will be used in the subsequent sections to stand for the corresponding item of a symmetric matrix.
(2) ( +  | ) is the predicted state at time  +  based on the current state ().

Problem Formulation
2.1.The Dynamic Model of High Speed Train.Consider a high speed train consisting of  cars, which is modeled by a cascade of cars connected with flexible couplers.As mentioned in [16,31], the behavior of couplers is described approximately by linear spring with stiffness coefficient .Therefore, the intrain force is described approximately by a linear function of the coupler relative displacement  between two adjacent cars, which can be established as follows: As   represents the absolute extension or compression length of the th coupler corresponding to the original length without any elastic deformation, it could be positive or negative.The force diagram of high speed train is depicted in Figure 1, where   ,   , and   denote traction force, mechanical resistance, and aerodynamic drag of the th car, respectively.Let   be the mass of th car; then according to Davis' equation [32],   and   are given by where  0 ,  1 , and  2 are positive constants and  is the total mass of train given by ∑  =1   .We assume that the air resistance acts only on the leading car and the rolling resistance acts on every car.According to Newton's law, the longitudinal dynamics for each car can be established by the following equation: where   is the inertia mass, V  is the speed of the th car, and   denotes the interactive force between the th car and the ( + 1)th car.
To achieve the high-precise velocity tracking, it is assumed that every car of the high speed train has its own independent control command, and we will adopt the distributed driving design for each car of the high speed train.Then the dynamic equation of an -cars high speed train can be obtained from (1) to (3) that To study the cruise control problem of the high speed train, the desired cruise speeds for each car of the high speed train are supposed as V * and the relative coupler displacements between the connected cars are  * which is equal to zero at the equilibrium state.Then the control forces in the equilibrium state are calculated as Letting x =   − * , V = V  −V * , and û =   −  and choosing () = [x 1 (), x2 (), . . ., x−1 (), V1 (), V2 (), . . ., V ()]  as the state variable and () = [û 1 ()/ 1 , û2 ()/ 2 , . .., û ()/  ]  as the decision vector, the error dynamic equation around the equilibrium state can be formulated as where ]×(−1) , In order to apply the MPC framework, the continuous time-domain state-space equation ( 6) is discretized by the zero-order hold method with a sampling period   : where  =    and  = ∫   0   .

T-S Fuzzy
Model for the High Speed Train.It has been proven that T-S fuzzy models can approximate any smooth nonlinear system to any accuracy within a compact set.The following T-S fuzzy dynamic model proposed in [19,33] can be used to represent the high speed train with both fuzzy inference rules and local analytic linear models as follows: Here,  is the number of inference rules and    ( = 1, 2, . . ., ) are the fuzzy sets; () is the state vector and () is the input vector, both of which are defined in (8);   and   are known constant matrices with appropriate dimensions.

Optimal Cruise Control Design
The goal of the fuzzy constrained predictive controller formulated in this brief is to develop the state feedback control law that satisfies all the constraints to optimize the high speed train operation performance with respect to safety, energy consumption, riding comfort, and velocity tracking with a minimized cost function by rejecting the effect of the actuator dynamics.
On the basis of either theoretic viewpoints or practical viewpoints, the following cost function is proposed: where  0 and  end are related to the start and end times of the optimizing interval;   ,   , and  V denote the weight factors of different objectives.
Remark 1.In the optimization objective criterion (11), the deviations of relative coupler displacements for each car are defined as the indicators of safety and riding comfort.Generally speaking, the integrand   ()V  () represents the exported tractive power of train  at time .Since our attention is focused on the energy consumption associated with the control strategy tending to the equilibrium state, we use the second part to express the energy efficiency performance.The third term represents the error of tracking the desired speed profile.
One of the most appealing features of the MPC is that the transient control performance of the closed-loop system can be adequately addressed in terms of certain optimal performance cost.For the train operation problem, the fuzzy constrained MPC approach uses the current train dynamic state, train model, and operational limits to compute future control inputs, so that the train operating performance ( 11) is optimized over the prediction horizon.
Assume that exact measurement of the train state ( | ) is available at each sampling decision step , and let (+ | ) be the predicted state of the high speed train at time  +  and let ( +  | ) be the future control at time  + ; we consider the infinite horizon MPC problem with a quadratic objective as [34].According to the error dynamical equation ( 8), the above performance objective function can be mathematically transformed into the following optimization problem: min where In practical applications, it is common to consider the bounded constraints on the control inputs   () on each car of the high speed train.More specifically,   () needs to satisfy  min () ≤   () ≤  max (), which depend not only on the train's capacity of traction or brake effort but also on safety and comfort requirements.In this paper, a corresponding constraint on û ( +  | ) in the following inequality is studied: The typical approaches for control design are carried out based on the fuzzy model via the so-called parallel distributed compensation (PDC) method.In this section, we use the fuzzy rule based state feedback control approach.Consider the following fuzzy state feedback control law: where () is the input of the controller for the high speed train;   is the gain matrix of the state feedback controller.Hence, the fuzzy controller can be represented by According to the fuzzy dynamic model of high speed train (10) and fuzzy state feedback law ( 16), the close-loop system is written as The following lemma will play an important role in obtaining main results in this paper.We show them as follows.

Fuzzy Predictive Controller of High Speed Train with Input
Constraints.Based on the Lyapunov stability theory, we will detail the fuzzy predictive controller design for optimal cruise control of the high speed train.At first, the actuator dynamics are not considered in model (11), and the following theorem will provide a sufficient condition for the existence of the fuzzy constrained predictive cruise controller which stabilizes the fuzzy system and minimizes the value of the objective function defined in (12).
Theorem 3. Consider the fuzzy predictive cruise controller of -cars high speed train in (10) with a fuzzy state feedback control strategy in the form of ( 17) and control input constraint in (14).For a given pair of positive definite matrices {, }, if there exist matrices () > 0, (),   (), and Φ for  = 1, 2, . . .,  with appropriate dimensions, such that the LMI optimization problem in (19) is feasibly subject to ( 20)- (23), where   is the th column of the identity matrix, then the control gain   () =   ()() −1 is obtained to guarantee that the performance objective function ( 12) is minimized and control input constraint is ensured.The high speed train tracks the predefined speed profile, and the relative spring displacement between the two connected cars is stabilized to the equilibrium state.
Proof.For the error state-space model (17), at sampling step , construct the following Lyapunov function candidate: (()) = ()  ()(), where () is a common positive definite matrix.In order to guarantee the stability condition for closed-loop control of high speed train, we impose the following design requirement: By summing (24) from  = 0 to ∞, we obtain the following formula: For the object function (12), it is reasonable to state that (( + ∞ | )) = 0 as ( + ∞ | ) = 0. Obviously, the design requirement (24) can be converted to where ( | ) is the state of high speed train at the initial time.
Let (( | )) ≤ , where  is a nonnegative coefficient to be minimized.Then the optimal cruise control problem (12) is relaxed by the following convex optimization problem: First, we will give the sufficient conditions for ( 24) and (27).Considering the closed-loop system in (17), the stability constraint (24) yields By Lemma 2, one can get that above inequality is equivalent to () (  +     ) −  () It is obvious that the stability constraint ( 24) holds if we guarantee the following inequalities: By variable substitution, let () = () −1 ; inequality (31) can be transformed to By Schur complement, one can get that above inequality is equivalent to where   () =   ()() −1 .
Next, we will detail the sufficient condition for the control constraint (14).Following (24), we have which is equivalent to Then, along (22), the following can be obtained: Considering the fact that ( +  | ) → 0 as  → ∞, thus  = { |    −1  ≤ 1} is an invariant ellipsoid for the predicted states of high speed train.

(42)
According to the inequality () − () − ()  ≥ −()  () −1 (), where () is a nonsingular matrix and () > 0, inequality (23) can be obtained.Then the MPC infinite horizon objective function is minimized, which implies that optimal cruise control performance in (27) can be ensured via this approach.Thus, the proof is complete.Remark 4. Theorem 3 gives a sufficient condition for choosing proper control gain () to optimize high speed train operation in infinite time horizon subject to input constraints.The conditions in Theorem 3 take the form of LMIs, which can be easily determined by using the Matlab LMI toolbox.Consequently, the proposed fuzzy constrained optimal cruise controller can be better applied to the practical high speed train cruise control.
In practice, the control performance for high speed train would inevitably be degraded if we design the traction/braking force directly.Therefore, it is necessary to study the fuzzy constrained predictive control strategy to inhibit the influences of actuator dynamics.

Fuzzy Constrained Predictive Controller of High Speed
Train with Actuator Dynamics.In this subsection, the influences of actuator dynamics on control performance are considered, and a compensator is developed to reduce the difference between the fuzzy constrained predictive controller output and the actual nonlinear control output.It is assumed that the actuator of every car in the high speed train has identical dynamics attributes, and the actuator dynamics in this brief are considered for the following case: where   () is control input of the th car from the fuzzy predictive controller,    () is the actual control output imposed on the th car, and    () is a virtual input.
The overall structure of the compensation scheme consists of fuzzy predictive controller, actuator compensator, and actuator as depicted in Figure 2, where   () is the control input from actuator compensator.
Next, based on Theorem 3, we will state our main results on the actuator compensator design for the fuzzy constrained predictive controller based on backstepping [36] approach.Theorem 5. Consider the actuator dynamics of high speed train as described by ( 43).If the th control input    () from actuator compensator in Figure 2 is adjusted according to the equation then it is ensured that the actual output of high speed train actuator asymptotically tracks the desired one given by the fuzzy constrained predictive controller in Theorem 3.
Proof.Consider the control-loop system as shown in where    () is the th control input from the actuator compensator.For the purpose of maintaining the desired performance of the fuzzy constrained predictive controller, we should guarantee that    () will closely track   ().Thus, the error is defined as Taking forward difference, we have To apply the backstepping recursive design procedure, we start with the definition of the virtual input    () = Δ  () −  0  1  (), where  0 is a constant.Then, one can obtain that Proceeding to apply backstepping process, we introduce the following variable: Taking forward difference, the above equation becomes Next, we construct the Lyapunov function candidate and also take its forward difference to obtain By combining (44), (48), and (50), we can obtain that condition (52) is equivalent to which shows that the origin ( 1  = 0,  2  = 0) is asymptotically stable by appropriately choosing  0 .Therefore, the th control input    () from actuator compensator in form of ( 44) is obtained to guarantee that the second-order actuator dynamics are reduced.This completes the proof.Remark 6. Theorem 5 develops a compensator using the backstepping technique to inhibit second-order actuator dynamics for high speed train.It should be pointed out that the actuator dynamics associated with the control problem of high speed train are closely related to traction and braking actions.In practical operation, traction and braking actions are usually taken interchangeably by the control system.For the sake of simplicity, this paper addresses the train dynamic model during traction and braking phase in a unified form with different parameters, which can be achieved by tuning  and  in (43).

Numerical Simulations
In this section, we will give numerical experiments to illustrate the effectiveness of the proposed method for the optimal control of high speed train.In these examples, we consider a high speed train with eight cars.The parameters of the high speed train are listed in Table 1, which are derived from the experimental results of the Japanese Shinkansen high speed train [17].
With the consideration of both theoretical and practical factors, the membership functions for the speed tracking error are chosen as shown in Figure 3.
According to the above membership functions, the closeloop system of high speed train (17) can be transformed to where In addition,   ,   ,  = 1, 2, . . ., 5, can be easily determined with respect to (11) and (54), which are not mentioned here to keep the paper concise.

Example 1.
Regarding the parameters used in the controller design, the sampling period   is 0.5 s, and the weights are   = 4 × 10 −7 ,   = 200, and  V = 0.5.For the optimal control of high speed train, the constraints for control input are determined not only by the physical characteristics of actuators but also by safety and comfort requirements.In practical optimal operations, the realistic constraint is usually far below the theoretical value of maximum traction effort.As a result, we adopt a usual and simplified constraint |  ()| ≤ 5 for the magnitude of control input in this research.Suppose that the high speed train is cruising at an initial speed V  = 180 km/h,  = 1, . . ., 8, and the initial relative displacement between the two neighbouring cars is   = 0,  = 1, . . ., 8. The desired speed of the high speed train is given as follows:  be obtained as   () =   ()() −1 .With help of Matlab LMI toolbox, gain   is solved efficiently and the minimum performance value is  * = 161588.5.As the dimensions for gain   are very large, it is not given here to keep the paper concise.
Under the fuzzy constrained predictive control, the running speed curves for each high speed train are plotted in Figure 4(a), where the velocity curves for each car are described in solid line and the dotted line denotes the desired speed.It shows that, at the initial time, each car of the high speed train tracks the desired speed V * = 180 km/h.Then, at the time  = 100 s, the desired speed for high speed train increases to 200 km/h, and each car of high speed train begins to accelerate to track the reference speed.We can find out that each car of high speed train can perfectly track the desired speed V * = 200 km/h after  = 432 s and the acceleration phrase lasts nearly 332 seconds.From  = 1000 s, the reference speed changes to 170 km/h, and each car of high speed train begins to brake to track the predefined speed.We can observe that the speeds of each car are eventually kept at the equilibrium state (zero point) from 1428 s.It is easy to calculate that the mean acceleration rate is approximately 0.06 m/s 2 , which ensures the safety and comfort of the operation of the high speed train.It can be inferred from the above results that although maximum traction force is usually adopted in an energy-efficient driving strategy, it may not be the optimal choice when other factors such as speed tracking and in-train forces are contemplated as a whole.
The evolution curves of relative coupler displacements between two neighboring cars are shown in Figure 4(b).When the high speed train starts to accelerate or decelerate, the deviations of the relative coupler displacements go up remarkably at the beginning of acceleration or deceleration phrase.As the speed is approaching the desired one, the absolute values of the displacements follow a downward trend.In the end, the relative coupler displacements between the two connected cars are stabilized at the equilibrium state (zero point).It is obvious that the deviations of the relative coupler displacements from the equilibrium state remain positive in the acceleration phase (i.e., generating traction force in the longitudinal direction) and become negative when the train begins to decelerate (i.e., generating braking force in the longitudinal direction), which are in accordance with practice.Meanwhile, the deviations of relative spring displacements for each car are effectively controlled in the reasonable range of 0.07 m during the whole journey, which ensure the safety and comfort of the operation of the high speed train.Correspondingly, the control forces   () for each train are plotted in Figure 4(c), which show that at the beginning the control forces   () for each train are very big for tracking the desired speed, and when the tracking goal of the fuzzy constrained predictive control is achieved, the control forces are reduced and converge to a constant.
From what has been discussed above, it can be concluded that the fuzzy constrained predictive design approach is able to schedule the train to track the reference speed profile without violating any operational constraints.

Example 2.
Then, under the case of actuator dynamics, we will consider the fuzzy constrained predictive control of high speed train.The actuator model is chosen as (43) with  = 14 and  = 100 during traction phase and with  = 20 and  = 150 for braking phase.Other control parameters remain the same as in Example 1 and the simulation results are given in Figure 5.By comparing to Figure 4, it is shown that, at the beginning of the acceleration and deceleration periods, the speed, relative coupler displacements between the two connected cars, and control forces with actuator dynamics have bigger fluctuations than the case without actuator dynamics.These unstable behaviors may be quite uncomfortable for passengers.In addition, all the speeds of each car with actuator dynamics track the desired speed slower than the case without actuator dynamics.The acceleration phrase undergoes nearly 480 s and the deceleration phrase lasts almost 620 s compared to 332 s and 432 s in Example 1, respectively, which clearly indicate that the actuator dynamics will lead to the degradation of the fuzzy constrained predictive controller.
We further consider the case where the actuator compensator in Figure 2 is introduced to counterbalance the effect of actuator dynamics.According to Theorem 5, by applying    () to each car, the running curves are depicted in Figure 6.From Figure 6, we can observe that, in the beginning, due to the big gap with the desired speed, all the cars are running with the traction forces.After  = 1000 s, each car of high speed train begins to brake to track the lower reference speed.It can be clearly found that the fluctuations in Figure 5   at the equilibrium state (zero point), which indicates the effectiveness of the proposed actuator compensator scheme.
To better show the effectiveness of the proposed actuator compensation method, we give some sensitivity analysis under different conditions.Then the case without actuator dynamics (Case 1), the case with actuator dynamics (Case 2), and the case with actuator compensator (Case 3) are plotted in Figure 7.For the convenience of comparing, we calculate the mean values of speeds, relative spring displacements, and forces for the three cases.From these simulation results, it can be seen that, during the whole travel, the mean speed curve and mean traction effort in Case 3 can exactly track the ideal results in Case 1, which also takes shorter time to reach the equilibrium state than Case 2.Moreover, the max value of mean relative spring displacements is much smaller due to the actuator compensator, which greatly enhances safety for high speed train movement.
In addition, simulations are carried out to investigate the effects of   ,   , and  V on the train's performance, which allow the proposed controller to make some adjustments with in-train force minimization, energy consumption reduction, and velocity tracking improvement.In order to facilitate energy consumption analysis in different control strategies, we use  = ∫  that controller is tuned to be an energy efficiency-emphasized one.Consequently, energy consumption decreases from 29856 MJ to 29678 MJ.By contrast, the acceleration time is longer and the max coupler displacement is larger compared to the case in Example 1, which results in worse speed tracking results, and in-train forces increase.To examine what exactly happens when attention is paid on better velocity tracking results, we change  V from 0.5 to 10, and the other parameters are the same as those presented in the above example unless otherwise noted.We can observe that it takes as soon as 314 s to catch the desired speed with  V = 10 compared to 360 s with  V = 0.5.This phenomenon can be explained by the reason that more efforts are exerted on each car to prompt the velocity in a shorter time, thereby leading to the fact that the maximum traction effort and energy consumption have a slight rise in this case.
Thus, the emphasized performance would be better, while the other two aspects of the performance would deteriorate.In practice, we should coordinate the three parameters with regard to the desired performance.

Conclusion
In this brief, we investigate the problem of fuzzy predictive cruise control of high speed train such that the objective function value of train performance criteria is optimized at every step in infinite time horizon subject to input constraints.Employing Takagi-Sugeno (T-S) fuzzy model, we approximate the high speed train system to an interpolation of some local linear models by fuzzy membership functions.Based on Lyapunov stability theory, a set of LMIs is given to solve the corresponding controller optimization problem which guarantees the various railway operational performances such as safety, energy consumption, riding comfort, and velocity tracking.Moreover, a mathematically rigorous and algorithmically tractable actuator compensator is added to adjust the output of the fuzzy constrained predictive controller in the presence of traction and braking dynamics, which greatly enhances safety and comfort for high speed train movement.The effectiveness and applicability of the proposed method are further examined through numerical experiments.Additionally, we notice that if the number of cars increases, the computational time in the proposed

Figure 1 :
Figure 1: Longitudinal dynamics of high speed train.

Figure 2 :
Figure 2: Structure of the actuator compensation scheme.

Figure 3 :
Figure 3: The membership functions for the speed tracking error.

Figure 4 :
Figure 4: Optimal curves for each car under the fuzzy constrained predictive controller.

Figure 5 :
Figure 5: Optimal curves for each car under the fuzzy constrained predictive controller with actuator dynamics.

Figure 6 :
Figure 6: Optimal curves for each car under the fuzzy constrained predictive controller with actuator compensator.

Table 1 :
The simulation parameters of high speed train.
are effectively handled, and both the relative spring displacements and speed of each car are finally kept |  V  | to approximate the energy consumed during the optimizing interval.Under the fuzzy constrained predictive controller with actuator compensator, the energy consumption, duration time, and max coupler displacement during the acceleration phase are summarized in Table2.First, we augment   from 200 to 2000 and the other two parameters remain the same as in Example 1, which implies