Discrete Dynamics in Nature and Society
Volume 2017 (2017), Article ID 9121032, 10 pages
https://doi.org/10.1155/2017/9121032

Research Article

A Viral Product Diffusion Model to Forecast the Market Performance of Products

Ping Jiang,¹ Xiangbin Yan,¹ and Liyan Wang²

¹School of Management, Harbin Institute of Technology, 13 Fa Yuan Street, Nan Gang District, Harbin 150001, China
²School of Economics and Management, Tongji University, 1500 Siping Road, Yang Pu District, Shanghai 200092, China

Correspondence should be addressed to Xiangbin Yan; xbyan@hit.edu.cn

Received 17 November 2016; Revised 24 February 2017; Accepted 28 February 2017; Published 15 March 2017

Academic Editor: Ricardo López-Ruiz

Copyright © 2017 Ping Jiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

To investigate the diffusion of products in the market, this paper proposes a viral product diffusion model using an epidemiological approach. This model presents the process of product diffusion through the dynamics of human behaviors. Based on the stability theory of Ordinary Differential Equations, we demonstrate the conditions under which a product in the market persists or dies out eventually. Next, we use Google data to validate the model. Fitting results illustrate that the viral product diffusion model not only depicts the steady growth process of products, but also describes the whole diffusion process during which the products increase at the initial stage and then gradually decrease and sometimes even exhibit multiple peaks. This shows that the viral product diffusion model can be used to forecast the developing tendency of products in the market through early behavior of these products. Moreover, our model also provides useful insights on how to design effective marketing strategies via social contagions.

1. Introduction

The promotion and diffusion of products in the market are a lasting and interesting research problem. To promote a new product which has just begun to occupy the market is very difficult, even if the product has more advantages than the existing products. However, a fraction of people who are the first users to accept a new product will take the role of a long fuse that can trigger the diffusion of the corresponding product throughout the market [1]. Therefore, it is of both theoretical and practical significance to forecast the long-term performance of products and explore effective marketing strategy of new products through their early behavior.

The most famous model for the study of product diffusion was the Bass model, which was proposed by Bass in 1969 [2]. The 1969 Bass model paper was one of the most highly cited papers in the marketing literature. This model had spawned the development of a core group of scholars in diffusion theory that was growing in number and influence [3]. In this model, buyers in the decision-making process are divided into innovators and imitators. The Bass model discusses at length the impact of the dynamic changes of innovators and imitators on the product sales. Based on the theoretical framework of the Bass model, a large number of product diffusion models are directly divided buyers, then analyze the changes of behaviors of these buyers in the decision-making process, and forecast product sales via these changes [4–7]. Although these models are effective for forecasting product sales, these models only present the changes of individual behaviors in the decision-making stage and fail to reveal how those buyers are formed. In other words, product diffusion models in the framework of the Bass model ignore the fact that people will experience an awareness stage before making a purchase decision. The motivation of this study is to supplement the discussion of the dynamic changes of individual behavior in the awareness stage, which not only helps to forecast the product sales, but also provides some useful suggestions for the formulation of marketing strategy.

Product diffusion is a process in which people communicate product information in the awareness stage and make a purchase decision during the decision-making stage. Whether in the awareness stage or in the decision-making stage, people’s behavior is highly contagious. This makes many similarities between the diffusion of products and the spread of infectious diseases. For this reason, scholars often use the epidemic model to study the diffusion of products [2, 8–10]. The success of the Bass model also shows that the epidemiological approach is very effective in the aspects of studying the product diffusion. The theoretical basis presented this paper still stems from the epidemiological approach. Since our model and the Bass model are derived from the same theory, our model can be considered as an extension of the Bass model.

The epidemic compartmental model was proposed in 1927 [11], and it characterized the spread mechanism of infectious disease. Since then, the epidemiological approaches had been widely applied to study the spread of memes [12], rumors [13], ideas [14, 15], and interest [16]. Using epidemiological approach to investigate the diffusion of products can be summarized in the following steps. First, we divide the crowd into different classes according to the individual perception and behavior on a product. According to the dynamic changes of the number of people in different classes, we propose a viral product diffusion model. Next, we analyze the dynamic properties of the model. Finally, Google Trends Data are used to test the model. As we shall see, our model fits well with real data.

The contribution of this paper is that we propose a new product diffusion model, which forecasts the developing tendency of products in the market and offers some marketing advices. In contrast with classic models, our model adds to the analysis of dynamic behaviors of individuals before they become buyers and discusses the impact of these dynamic behaviors on the performance of products in the market. These analyses and discussions can be helpful to understand how a product occupies the market or disappears from the market and can help us to adjust marketing strategies more purposefully. In our model, the mechanism and process of product diffusion are better described and presented. Moreover, we also analyze the reasons for the formation of buyers. We believe that some of them are out of interest in the product, while others become buyers because of persuasive advertisement, or the influence of peers or others. We find that potential customers have different psychological characteristics and behavior patterns. For this reason, marketing strategies should also reflect the differences even if these strategies are all aimed at potential customers. This finding provides useful insights on designing more effective marketing strategies.

The rest of this paper is organized as follows. Section 2 states some research works related to product diffusion model, viral marketing, and social contagions. In Section 3, we propose a viral product diffusion model and analyze its dynamic properties. The validity analysis and discussion are laid out in Sections 4 and 5, respectively. Finally, Section 6 provides some concluding remarks.

2. Related Work

2.1. Product Diffusion Model

The classical model for the study of new product diffusion was the Bass model (BM), which divided individuals into the innovators and imitators according to the decision behavior of individuals in a social system [2, 3]. The BM provided a useful framework for understanding the diffusion of new products and technologies.

Based on this framework, Li and Jin [17] proposed that the new product diffusion could be divided into two stages, which were the awareness stage and the decision-making stage. They found that new product diffusion was not be affected by persuasive advertisement in the decision-making stage. Chung et al. [5] provided a sales forecast model for short-life-cycle products, such as movies and games. Van Den Bulte and Joshi [18] discussed the role of influentials and imitators in the diffusion of new products. Moreover, scholars expanded and modified the BM due to the inherent limitations of the original model. Niu [19] provided a Stochastic Bass Model (SBM) so that the trajectory of cumulative adoptions in the BM was stochastic trajectory. Ismail and Abu [6] built a robust BM to forecast the sales volume. Kim and Hong [7] proposed a Bass model with integration constant, which effectively dealt with the nonzero initial level.

In addition to the BM, econometric approach, grey theory, and complex network theory were also used to investigate the product diffusion. Elberse and Eliashberg [20] developed an econometric model to discuss the dynamics of the supply and demand of products in the international market. Wang et al. [21] proposed a time-delayed Verhulst model to describe the delay phenomenon in the diffusion of new products. Since both external and internal factors in the market will influence the new product diffusion, the problem of insufficient data was often encountered in practical research. To solve this problem, Guo et al. [22] gave a grey diffusion model based on grey system theory. Nowadays, the network based on a variety of links is everywhere. Research on product diffusion from the perspective of networks has become inevitable. Wu and Zhang [23] investigated the impact of consumer network structure on the new product diffusion. By simulating the diffusion process in the small world network, they found that the new product will spread faster if there are more weak links.

Although the researches on the product diffusion had been very rich, little attention was paid to the dynamic changes of human behaviors. This study is to fill such a gap. We propose to model the diffusion of products via the dynamics of human behaviors and then investigate the influence of these behavior changes on product performance and marketing strategy.

2.2. Viral Marketing and Social Contagions

Viral marketing was used as a term that started in 1997 [24]. In essence, viral marketing was a special form of electronic word of mouth. It encouraged people to exchange product information or their opinions on products, brands, and companies through social contagions among individuals [25]. Like a virus, viral marketing took advantage of multiplication to spread a message to thousands and even millions [26, 27].

Instead of broadcasting directly the existing advertising to a huge number of users [28], viral marketing targeted a limited number of initial users [29]. Initiating from these seed users, it could activate a “chain-reaction” driven by word of mouth [30]. If the initial users were influential people, then the chain-reaction will be more rapid because these influential people had stronger contagion power in social activities. There were many methods to find influential users or nodes, such as using the characteristics of network members [31] or discovering algorithm based on user trust network [32].

As a marketing strategy, the success of viral marketing is because this strategy gives full play to the role of social contagions in product promotion. If opinion leaders were selected as the seed users, then evidence of contagion was an important driving force to trigger word of mouth chain-reaction [33]. Moreover, social contagions in the product market could arouse repetitive behaviors [34, 35]. These repetitive behaviors have great commercial value because they would bring a lot of potential customers. How to present these repetitive behaviors is one of the highlights of this study.

3. Model and Dynamic Analysis

3.1. Model

Using the epidemiological approach to study a problem requires dividing the population into different classes. To pay respects to the heritage of the epidemic model, we use similar terms to define different classes in our model.

The diffusion of the product in the market is a complex process. It is not only reflected in the visible sales data. In effect, product diffusion should be evaluated with more metrics, such as the transmission of product information and product attention. This not only conforms to the cognitive law, but also can more accurately assess the performance of the product in the market. In such a broad sense of product diffusion, we explain how people are divided into different classes.

When a new product is introduced in the market, some people are very keen on the appearance of this new product. Those individuals who are exposed to and interested in a product at the first time constitute a class, which is called the “susceptible” class . After an individual has a little understanding of a product, he tends to share the information about the product. The “infected” class is composed of individuals who actively spread the product information in social interactions.

In the Internet age, each individual is not isolated, and the behavior of the individual is likely to be affected by social contagions. When people talk about a product in social interaction, social contagions will lead to the repetitive behaviors that people pay attention to the product. In our model, we also introduce the second type of “susceptible” class. It is denoted by , which consists of individuals who pay repeated attention to the same product. In other words, if an individual has known a product but he still shows great interest in obtaining more product information, then the individual belongs to the “susceptible” class . Note that individuals in and have distinct differences, though these individuals are all susceptible individuals. The main differences between and are reflected in two aspects. First, the formation of the former is derived from individual psychology, and the latter is the result of social contagions. Second, individuals in know a little product information. Compared with these individuals, persons in obtain more information about the product.

One product can trigger people’s sustained interest, which is what we expect. However, due to the impact of many subjective and objective factors, people lose interest in the product when they know the basic product information. Thus, the last class is called the “recovered” class , which consists of individuals who have experienced a product and lost interest in the product.

By dividing the population into four classes, the transmission and diffusion of a product in the market can be abstracted as the following dynamic process.

In Figure 1, parameter is defined as the transmission contact rate, which represents the probability that a susceptible individual becomes an infected individual. Parameter is the reinfection rate, which shows the rate at which a susceptible individual is repeatedly infected by a product. Parameter is the proportionality constant of sustained interest, which governs the rate at which infected individuals are affected by social contagions and have sustained interest in a product. Finally, parameter is the proportionality constant of loss of interest, which controls the rate at which infected individuals lose interest in the same product and move into the recovered class.

Figure 1: Flow chart of individual transfer among different classes.

Since class represents individuals who have not yet been exposed to a product and the number of individuals in this class is influenced by the market capacity and the subjective factors, we assume that the number of increased individuals in class follows the logistic growth. Suppose that infected individuals have a socially attractive effect on the individuals of class and class . Hence the infection rate is proportional to , and the reinfection rate is proportional to . In addition, the recovery rate is proportional to when infected individuals transform into recovered individuals. At time , the population densities of these four classes are denoted by , , , and , respectively. According to the individual dynamics described in Figure 1, our viral product diffusion model is defined as follows:

In model (1), it is assumed that the increment of susceptible individuals in class is governed by the logistic growth with a market capacity as well as intrinsic increase rate constant . According to the actual meaning of parameters, it is easy to know that , , , and are all positive constants and the feasible region of model (1) is . Moreover, there is a point to note about the formulation of model (1). In this model, we assume that all individuals have equal effect on other individuals. In other words, for the social contagions between susceptible and infected populations, every individual in has an equal influence on every individual in or and vice versa.

3.2. Dynamic Analysis

Because the first three equations of model (1) do not contain the class , the dynamic behavior of model (1) is equivalent to the following model:

To solve the equilibria of model (2), let the right side of each differential equation be equal to zero; then we have

We obtain two equilibria of model (2) by solving equations (3). They are and , where , , , and . Here represents the initial value of class . Let , if ; then model (2) has a unique equilibrium ; if , then model (2) has a boundary equilibrium and a unique positive equilibrium .

Based on the Ordinary Differential Equations (ODE) theory, we analyze the dynamic properties of model (2).

Theorem 1. Consider model (2) with any given initial condition , , and . Whether the viral product persists or dies out eventually depends on the value of . If , and , then the solution of model (2) asymptotically converges to , where is initial condition dependent, and the viral product dies out. If , then , and the viral product persists.

Proof. Let

that is, , , and are functions of variables , , and . Then the Jacobian matrix of model (2) associated with equilibrium is

The characteristic equation associated with the linearization of model (2) at is

where is a unit matrix. The three eigenvalues of the Jacobian matrix at equilibrium are , , and , respectively. Clearly if , model (2) has a unique positive equilibrium . Moreover, if , then , , and . According to the ODE stability theory [36], equilibrium is locally asymptotically stable in feasible region . That is, the solution of model (2) asymptotically converges to . The proof is complete.
Next, consider Jacobian matrix at equilibrium ; we obtain

Then the characteristic equation associated with the linearization of model (2) at is

where is a unit matrix. This implies that

Clearly ; let ; then .
Due to , , it is easy to know that

Moreover, when ; it is clear that and have negative real parts. Consequently, all roots of the characteristic equation (8) have negative real parts when . According to the ODE stability theory, the unique positive equilibrium is locally asymptotically stable in feasible region . This means that as .

4. Model Validation

4.1. Data

The rapid development of Internet technology makes it possible to obtain the historical search data of a product. These historical data record the search behavior of a product and reflect the people’s attention to the product. To test our model, we collect Google search engine data, which are obtained from the Google Trends tool. Google search data began in 2004 and spaced at weekly intervals. These data report the relative number of search volume for a given product.

As the data provided by Google Trends are very rich, the selection of sample data is very flexible. Generally speaking, we only need to follow some major rules to determine the search strings. First, search strings are not confined to specific physical products. They can also be new applications in social networks or popular brands. Diverse choices can ensure the applicability of the model. Second, the selection of search strings should be relatively new because Google Trends provides search data since 2004. Finally, popular products are the best choice. For a given search string, we obtain the search data which are normalized by Google Trends. In a sense, if a product is more popular, then Google Trends can provide more effective product data. Based on the above criteria, we choose three search strings as sample data. They are Instagram, Nokia Lumia 920, and The North Face.

4.2. Parameter Estimation

In order to test the validity of the model, we first need to estimate the unknown parameters in the model. In this section, we introduce the theory of parameter estimation and how to estimate those unknown parameters according to the sample data. Considering system (2) with initial conditions, which can be expressed in the following form:

where is the vector of state variables, is the vector of unknown parameters, and is a time variable.

Suppose that the observed values of system (11) are denoted by ; then . Here are the real values of system (11) when parameters and are random deviations. And these random deviations satisfy the following conditions.

(1) are i.i.d. random variables.(2), then .(3), then .

According to the Ordinary Least Squares (OLS), we can solve an estimator which satisfies:

where is the feasible region for parameter .

To solve a best estimator, we can perform the following steps. First, we compute the numerical solutions of system (11), which can be solved using MATLAB ode45. Note that it is very important to give a reasonable initial value. This is because the choice of the initial value directly affects the speed and the accuracy of numerical computation. Second, according to (12), that is, the OLS theory, we can obtain a new set of parameters by making numerical solutions of system (11) better fit the observed data. This step can also be achieved via MATLAB. MATLAB’s optimization toolbox provides many optimization algorithm functions, such as function “fminbnd,” “fminsearch,” and “fminunc.” Here we use the function “fminsearch” to optimize the objective function . Third, using the new parameters obtained by the second step, we compute new numerical solutions of system (11), and then these solutions are compared with the observed data again. The iteration process between numerical solutions of system (11) and parameter updating will stop when the system residual meets the demands. Through the above three steps, we solve an estimator that meets the convergence criteria of a given optimization algorithm. This is an optimal estimation of the unknown parameters in the feasible region .

4.3. Results

According to the above calculation steps, the results of the parameter estimation for the three strings are shown in Table 1.

Table 1: Estimated parameter values.

Product
Parameter

()
()
()
()
()
()

Instagram
5.0
3.5
0.03
0.9
0.3
0.5

Nokia Lumia 920
0.1
5.0
6.5
81.0
35.0
3.3

The North Face
1.5
8.0
4.7
5.0
0.042
0.027

The first search string is “Instagram,” which is a very popular social networking service. Google Trends Data showed that the search volume of “Instagram” gradually increased since 2011. Up to now, the number of people who are concerned about Instagram is still in a stable growth state. Figure 2 presents the fitted curve plotted alongside the Google Trends Data.

Figure 2: Model fitting on “Instagram” from October 2011 to January 2016.

The second example is a digital product. The exact search string is “Nokia Lumia 920” to obtain sample data. The search volume of this product reached its peak in 2013 and then began to decline gradually. Google Trends Data showed that the search trend of “Nokia Lumia 920” presented an obvious peak. The fitted curve of the product can be seen in Figure 3.

Figure 3: Model fitting on “Nokia Lumia 920” from August 2012 to January 2016.

The last search string is “The North Face,” which is a fashion brand. Unlike the above two examples, this brand existed prior to 2004 so that its search records began in 2004. The search volume of this brand showed multiple peaks in 2004–2016. That is to say, the performance of the brand in the market presents fluctuating changes. Figure 4 shows the fitted curve of Google Trends Data.

Figure 4: Model fitting on “The North Face” from January 2012 to January 2016.

The above fitting results illustrate that our model has shown good adaptability for the various performances of the product. The model not only depicts the steady growth process of products, but also describes the whole process that the products increase in the initial stage and then gradually decrease and even can handle multiple peaks of products. Hence, our model can be used to forecast the performance of products in the market.

4.4. Comparison Analysis

From Figures 2, 3, and 4, we can observe that the viral product diffusion model has, in some sense, been tested and verified. In order to illustrate the forecasting effect of the model, we compare the model with the Bass model based on the above sample.

The basic form of the Bass model is , , where presents sales at , and is cumulative sales through period . The specific meaning of parameters , , and can be found in this literature [2]. Based on this model, we first estimate the parameters in the model via “Instagram” and “Nokia Lumia 920” data. Here parameter estimation is computed by regression analysis. Table 2 shows the regression results. On the basis of this, Figures 5 and 6 illustrate the predicted curves and actual curves for the two samples.

Table 2: Bass model regression results.

Product
Period

()

Instagram
Oct 23, 2011–Nov 30, 2013
3.4952
0.0367
−8.2387
0.9644

Instagram
Oct 23, 2011–Jan 23, 2016
10.0414
0.0169
−1.0801
0.9570

Nokia Lumia 920
Aug 05, 2012–Dec 22, 2012
21.9117
0.1306
−59.1643
0.6064

Nokia Lumia 920
Aug 05, 2012–May 11, 2013
28.1587
0.0952
−39.6549
0.5729

Nokia Lumia 920
Aug 05, 2012–Feb 15, 2014
45.2149
0.0278
−9.2015
0.4596

Nokia Lumia 920
Aug 05, 2012–Jan 23, 2016
51.7469
0.0134
−5.1592
0.7815

(a) Oct 23, 2011–Nov 30, 2013

(b) Oct 23, 2011–Jan 23, 2016

Figure 5: Actual data and curves predicted by two models for “Instagram.”

(a) Aug 05, 2012–Dec 22, 2012

(b) Aug 05, 2012–May 11, 2013

(c) Aug 05, 2012–Feb 15, 2014

(d) Aug 05, 2012–Jan 23, 2016

Figure 6: Actual data and curves predicted by two models for “Nokia Lumia 920.”

Figures 5 and 6 show that the Bass model and our model all provide a good description of the general trend of the actual data. But as shown in Figures 5 and 6, we find that the Bass model provides a more efficient prediction in the vicinity of the peak. The result of forecasting is particularly good for short-term trend before the peak, as shown in Figure 5(a). Contrary to this, our model predicts long-term trend better than the Bass model. In addition, the Bass model can only simulate the inverted U curve. For this reason, we did not use “The North Face” data to test the Bass model. The Bass model, , present a parabola, which is a single peak curve. However, our model can simulate the oscillation of the product curve. It handles multiple peaks of products.

5. Discussion

To illustrate the general applicability of the model, we use three cases to validate our model. It is interesting to note from Figure 4 that our model fits well with the transient oscillations. Actually, Theorem 1 demonstrates that eventually the solution of model (2) should approach the equilibrium point, which is illustrated by the decreasing amplitudes of transient oscillation in Figure 7. This means that our model is also applicable for the situation where the peaks of a product are gradually weakened.

Figure 7: The solution of viral product diffusion model will tend to the equilibrium point.

By analyzing the dynamic properties of model (2) and fitting the actual data, we find that the diffusion process of the product indeed is reflected in the dynamic changes of the number of individuals in different classes. For this reason, we can regulate the market performance of the product by altering parameters , , , and in model (2).

The ideas to change these parameters are as follows. In view of the differences mentioned in the previous between and , marketing strategies for adjusting parameters and are different. Since individuals in class are more curious to a new product and they experience the product only once, the strategy of changing parameter must emphasize the novelty and interest of the product so as to make these individuals move into class . However, such marketing ideas are not suitable for class . Individuals in class intend to gain more product information so that they can get a better understanding of a product. Accordingly, the strategy of adjusting parameter should highlight the function of the product and promote the user feedback. Individuals move from class to class due to social contagions. Thus, increasing parameter needs to draw support from social contagions. For instance, we can devise a method to drive chain-reaction of word of mouth or utilize the infectivity of individual behaviors. Such strategies are easy to arouse the herd effect, which are effective methods to increase the number of individuals in class . As for parameter , the key of adjusting this parameter is to focus on how to maintain the individual’s interest in one product. As long as we follow this principle, the strategies to change parameter are very flexible. In short, we need to fully consider the characteristics of individuals in different classes when we design marketing strategies. Targeted marketing is more effective.

We have a brief explanation on parameters and in model (2). Note that parameter represents the constant population size, which has a convoluted meaning because Google Trends Data are normalized. Parameter is influenced by many factors so that this value is generally different for different products.

6. Conclusions

In this paper we propose a viral product diffusion model via the epidemiological approach. Dynamic analysis of the model reveals the conditions for a product to persist or die out. The model has been verified according to Google Trends Data. Validation results show that our model describes the steady growth or a single peak of a product very well. Also, this model can reflect the fluctuation of a product. It is remarkable that the diffusion process of the product in the market can be modelled by such a simple viral model and the real data fit a theoretical curve so closely.

Our research provides a new approach to forecast the long-term performance of products through their early behaviors. Depending on accurate prediction of product performance, the company managers may adjust the production project and operation plan and update the products. The new approach provides a theoretical guarantee for the management to make the right decision. Furthermore, this study is also instructive to marketers. In order to achieve the expected sales, the design of marketing strategies should grasp the characteristics of customers, even if these customers are all potential customers. Specifically, marketing methods for individuals in class should emphasize the novelty and interest of a product, which can stimulate them to purchase or spread the product. While individuals in class are the marketing targets, marketing strategies should include more information on product functions and user experiences in order to make these potential customers believe and buy a product. These suggestions can help marketers to develop more effective marketing strategies.

There are still some limitations in this study. Parameters needed to be estimated in the three examples are assumed to be time-independent constants while they are likely to be time-varying. We will explore the product diffusion model with time-varying parameters in the future.

Conflicts of Interest

The authors declare that they have no conflicts of interest.

Acknowledgments

This work is supported by the National Natural Science Foundation of China (71531013 and 71490720).

References

V. Mahajan, E. Muller, and Y. Wind, New-Product Diffusion Models, vol. 11, Springer Science & Business Media, New York, NY, USA, 2000.

F. M. Bass, “A new product growth for model consumer durables,” Management Science, vol. 15, no. 5, pp. 215–227, 1969.

F. M. Bass, “Comments on 'a new product growth for model consumer durables the bass model',” Management Science, vol. 50, no. 12, pp. 1833–1840, 2004.

J. Massiani and A. Gohs, “The choice of Bass model coefficients to forecast diffusion for innovative products: an empirical investigation for new automotive technologies,” Research in Transportation Economics, vol. 50, pp. 17–28, 2015.

C. Chung, S.-C. Niu, and C. Sriskandarajah, “A sales forecast model for short-life-cycle products: new releases at blockbuster,” Production and Operations Management, vol. 21, no. 5, pp. 851–873, 2012.

Z. Ismail and N. Abu, “A study on new product demand forecasting based on bass diffusion model,” Journal of Mathematics and Statistics, vol. 9, no. 2, pp. 84–90, 2013.

T. Kim and J. Hong, “Bass model with integration constant and its applications on initial demand and left-truncated data,” Technological Forecasting and Social Change, vol. 95, pp. 120–134, 2015.

H. S. Rodrigues and M. J. Fonseca, “Can information be spread as a virus? Viral marketing as epidemiological model,” Mathematical Methods in the Applied Sciences, vol. 39, no. 16, pp. 4780–4786, 2016.

G. Fibich, “Bass-SIR model for diffusion of new products in social networks,” Physical Review E, vol. 94, no. 3, Article ID 032305, 2016.

R. Illner and J. Ma, “An SIS-type marketing model on random network,” Communications in Mathematical Sciences, vol. 14, no. 6, pp. 1723–1740, 2016.

W. O. Kermack and A. G. McKendrick, “A contribution to the mathematical theory of epidemics,” Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 115, no. 772, 1927.

L. Wang and B. C. Wood, “An epidemiological approach to model the viral propagation of memes,” Applied Mathematical Modelling, vol. 35, no. 11, pp. 5442–5447, 2011.

D. J. Daley and D. G. Kendall, “Epidemics and rumours,” Nature, vol. 204, no. 4963, p. 1118, 1964.

L. M. A. Bettencourt, A. Cintrón-Arias, D. I. Kaiser, and C. Castillo-Chávez, “The power of a good idea: quantitative modeling of the spread of ideas from epidemiological models,” Physica A: Statistical Mechanics and Its Applications, vol. 364, pp. 513–536, 2006.

L. M. A. Bettencourt, D. I. Kaiser, J. Kaur, C. Castillo-Chávez, and D. E. Wojick, “Population modeling of the emergence and development of scientific fields,” Scientometrics, vol. 75, no. 3, pp. 495–518, 2008.

R. J. Shiller and J. Pound, “Survey evidence on diffusion of interest and information among investors,” Journal of Economic Behavior & Organization, vol. 12, no. 1, pp. 47–66, 1989.

S. Li and Z. Jin, “Global dynamics analysis of homogeneous new products diffusion model,” Discrete Dynamics in Nature and Society, vol. 2013, Article ID 158901, 6 pages, 2013.

C. Van Den Bulte and Y. V. Joshi, “New product diffusion with influential and imitators,” Marketing Science, vol. 26, no. 3, pp. 400–421, 2007.

S.-C. Niu, “A stochastic formulation of the Bass model of new-product diffusion,” Mathematical Problems in Engineering. Theory, Methods and Applications, vol. 8, no. 3, pp. 249–263, 2002.

A. Elberse and J. Eliashberg, “Demand and supply dynamics for sequentially released products in international markets: the case of motion pictures,” Marketing Science, vol. 22, no. 3, pp. 329–435, 2003.

Y. Wang, S. Yang, W. Qian, and X. Li, “Forecasting new product diffusion using grey time-delayed Verhulst model,” Journal of Applied Mathematics, vol. 2013, Article ID 625028, 6 pages, 2013.

H. Guo, X. Xiao, and J. Forrest, “The forecasting of new product diffusion by grey model,” Journal of Grey System, vol. 27, no. 2, pp. 68–77, 2015.

C. Wu and Y. Zhang, “A simulation model of new product diffusion based on small world network,” Canadian Social Science, vol. 9, no. 3, p. 24, 2013.

C. Knight, “Viral marketingdefy traditional methods for hyper growth,” Broadwatch Magazine, vol. 13, no. 11, pp. 50–53, 1999.

D. D. Gunawan and K.-H. Huarng, “Viral effects of social network and media on consumers' purchase intention,” Journal of Business Research, vol. 68, no. 11, pp. 2237–2241, 2015.

A. Vilpponen, S. Winter, and S. Sundqvist, “Electronic word-of-mouth in online environments: exploring referral networks structure and adoption behavior,” Journal of Interactive Advertising, vol. 6, no. 2, pp. 8–77, 2006.

J. Kirby and P. Marsden, Connected Marketing: The Viral, Buzz and Word of Mouth Revolution, Elsevier, Bodmin, UK, 2006.

J. Bryant and D. Miron, “Theory and research in mass communication,” Journal of Communication, vol. 54, no. 4, pp. 662–704, 2004.

C. Long and R. C.-W. Wong, “Viral marketing for dedicated customers,” Information Systems, vol. 46, pp. 1–23, 2014.

A. Mochalova and A. Nanopoulos, “A targeted approach to viral marketing,” Electronic Commerce Research and Applications, vol. 13, no. 4, pp. 283–294, 2014.

I. G. Amnieh and M. Kaedi, “Using estimated personality of social network members for finding influential nodes in viral marketing,” Cybernetics and Systems, vol. 46, no. 5, pp. 355–378, 2015.

Z. Zhu, “Discovering the influential users oriented to viral marketing based on online social networks,” Physica A. Statistical Mechanics and its Applications, vol. 392, no. 16, pp. 3459–3469, 2013.

R. Iyengar, C. van den Bulte, and T. W. Valente, “Opinion leadership and social contagion in new product diffusion,” Marketing Science, vol. 30, no. 2, pp. 195–212, 2011.

R. Iyengar, C. Van den Bulte, and J. Y. Lee, “Social contagion in new product trial and repeat,” Marketing Science, vol. 34, no. 3, pp. 408–429, 2015.

S. Aral, “Identifying social influence: a comment on opinion leadership and social contagion in new product diffusion,” Marketing Science, vol. 30, no. 2, pp. 217–223, 2011.

S. H. Strogatz, Nonlinear Dynamics and Chaos: With Applications to Physics, Biology, Chemistry, and Engineering, Westview press, Boulder, Colo, USA, 2014.