A First-Stage Approximation to Identify New Imprinted Genes through Sequence Analysis of Its Coding Regions

In the present study, a positive training set of 30 known human imprinted gene coding regions are compared with a set of 72 randomly sampled human nonimprinted gene coding regions (negative training set) to identify genomic features common to human imprinted genes. The most important feature of the present work is its ability to use multivariate analysis to look at variation, at coding region DNA level, among imprinted and non-imprinted genes. There is a force affecting genomic parameters that appears through the use of the appropriate multivariate methods (principle components analysis (PCA) and quadratic discriminant analysis (QDA)) to analyse quantitative genomic data. We show that variables, such as CG content, [bp]% CpG islands, [bp]% Large Tandem Repeats, and [bp]% Simple Repeats, are able to distinguish coding regions of human imprinted genes.


Introduction
Genomic imprinting is an epigenetic modification of dispersed regions of the genome depending on their exposure to the maternal or paternal germline. This results in differential expression of only one of the two alleles depending on the parent of origin. Allele-specific CpG methylation, histone acetylation, asynchronous DNA replication, and chromatin condensation are all associated with imprinted loci [1].
Recently, the question of whether imprinted genes have sequence characteristics that distinguish them from nonimprinted genes is drawing the attention of several research groups. Such structural differences may elucidate the mechanisms leading to allele-specific expression of imprinted genes [2]. Greally [3] found that the main sequence characteristic of human imprinted genes is a lower incidence of short interspersed nuclear elements. For tandem repeats and CpG islands, there is accumulating evidence correlating these elements and genomic imprinting. Accordingly, some authors [4][5][6][7] suggested using these sequence features as a search tool for imprinted genes.
Identifying imprinted genes experimentally is challenging because the monoallelic expression of an imprinted gene may occur only in one of possibly several isoforms, only in particular tissues, or only at particular stages of development. Many autosomal genes are imprinted only in specific tissues or cell types, including GRB10 [8], Igf2/H19 [9], UBE3A [10], ATP10A (formerly ATP10C) [11], and KCNQ1 [12].
Consequently, in the absence of any method for prioritising genes, an average of 100 genes must be examined before a new imprinted gene can be identified. Indeed, experimental identification of human imprinted genes to date has been slow. To date, only ∼60 human imprinted genes have been identified.
For this reason, the application of sequence analysis approaches to genome-wide screening of human genes, which can be ranked to identify those with a sequence composition suggestive of imprinting, is very useful.
To date, imprinted genes are predicted using a wide range of genomic features and sophisticated strategies and methodologies [13][14][15][16], but no simple sequence patterns and models are known to accurately distinguish imprinted genes from non-imprinted ones. But even so, a simple approach Table 1: List of imprinted genes classified by expression.   Name  Band  Expression  TP73  1p36  M  LRRTM1  2p12  P  NAP1L5  4q22  P  PRIM2  6p12  M  PLAGL1  6q24  P  HYMAI  6q24  P  PEG10  7q21  P  PON1 7q21 would be potentially valuable for directing laboratory work in a first stage. We are concerned with identifying possible candidate imprinted genes to allow their imprinting status to be determined experimentally. For this reason, human gene coding region features are considered further with a view to developing an approximation to a first-stage screening and classifying genes into imprinted and non-imprinted candidate groups. This study uses statistical approaches for a first discrimination between imprinted and nonimprinted genes based on the currently available coding region sequences.

Materials and Methods
A positive training set of 30 human genes ( Table 1) that showed imprinting effects were selected for analysis from the Catalogue of Imprinted Genes (http://igc.otago .ac.nz/home.html). A negative training set of 72 randomly selected control genes and a test set of 31 predicted imprinted genes were compiled from the recent literature [16] and were collected from the NCBI nucleotide database (http://www.ncbi.nlm.nih.gov/). See supplementary data for more details about these genes used in this study.
The sequence characteristics of the coding regions of each gene were examined in the analysis. These regions are the portions of a gene or an mRNA which actually code for a protein.
For CpG dinucleotide analysis, we used the NEWCP-GREPORT program (http://mobyle.pasteur.fr/cgibin/portal .py?form=newcpgreport), and the total number of CpG islands was counted. For the repeat element analysis, the Repeat Masker program (http://www .repeatmasker.org/cgi-bin/WEBRepeatMasker) was used, and for tandem repeat analysis, the ETANDEM program (http://mobyle.pasteur.fr/cgi-bin/MobylePortal/portal .py?form=etandem) was used. All classes of repeat elements output from Repeat Masker were collected. We used ETANDEM to obtain numbers of tandem repeat elements ranging from 5 bp to 100 bp. The Wilbur and Lipman pairwise sequence alignment method, implemented in the MegaAlign program of the DNAstar Sequence Analysis software (Lasergene v8.0; http://www.dnastar.com) used to align sequences of Large Tandem Repeats identified in imprinted genes.
Principal component analysis (PCA) and quadratic discriminant analysis (QDA) models of the [bp]% sequence characteristics data were performed using the Minitab software [17].
PCA analysis is a multivariate statistical technique. The central idea of PCA is to reduce the dimensionality of a data set that presents a large number of interrelated variables, while retaining as much as possible the variation present in the data set. PCA can search the data for qualitative and quantitative distinctions in situations where the number of data available is too large.
The purpose of the Quadratic Discriminant Analysis is to predict membership of a group from a set of predictor variables (the sequence characteristics). The discriminant is the quadratic combination of the predictor variables that best predicts group membership, allowing each gene to be classified into either imprinted or control groups on the basis of its sequence characteristics.
The performance of the classification was assessed using internal and external validation methods according to our software capabilities.
With the QDA model, we used an internal validation method called cross-validation [18]. This method uses the training set to check the model. Here, the training set is divided in several segments. One segment is reserved to corroborate the results, and the rest of them are used to build the model. This process is repeated as many times as segments you have, and every time one of these segments is out of the calibration, and the other ones are used to build the model. Finally, all the segments are used to both build and validate the model. With the PCA model, we used the external validation test set method. The number of elements of this set must be large (at least 25% of the training set size), and it must be Comparative and Functional Genomics independent of the training set, but also this test set must represent the training set. The imprinted status of the test set is known, so it is possible to assess the PCA model using different elements that the ones used to build the model.

Results and Discussion
Recently, Ke et al. [14] found significant statistical differences between some sequence descriptors of human imprinted and control gene coding regions. These significant variables in their regression model were the Simple and Large Tandem Repeats, GC content, CpG islands, and short interspersed nuclear elements.
Taking into account this fact, we considered these descriptors (variables) as the most relevant ones for our study. So, the [bp]% genomic sequence characteristics of GC content, CpG islands, simple repeats (SR), large tandem repeats (LTR) and SINEs of all imprinted and non-imprinted coding region sequences were calculated.
Before applying the pattern recognition methods, each calculated descriptor was autoscaled. In the autoscaling method, each variable is scaled to a mean of zero and a standard deviation of unity. This method is very important because each variable is weighted equally, and this provides a measure of the ability of a descriptor to discriminate classes of compounds [19]. With this method, we can compare all descriptors at the same level.
Firstly, we started applying the PCA technique. After several PCA analyses, the best separation was obtained by using the following descriptors: GC content, [  Considering the first (PC1) and second (PC2) components, the accumulated variance increases to 72%. Figure 1 shows that both PC1 and PC2 are in fact responsible for the discrimination between imprinted (two groups: I1 and I2) and non-imprinted (two groups: NO I1 and NO I2) genes. PC1 and PC2 can be represented by the following equations, that in fact form the PCA pattern recognition model: From Figure 2 and (1) Genomic sequence characteristics of a total of 22544 bp from the coding sequences of 12 (I1 group) imprinted genes were compared to those of 66959 bp of coding sequences of 18 (I2 group) imprinted genes (Table 2) in order to carry out a deep study of the most relevant imprinted descriptors. The average number of CpG islands was higher in I1 group (1.8) than in I2 group (0.4). The frequency of G + C was also higher in I1 genes (62%) than in I2 ones (45%). Moreover, the average number of the ratio [bp]% LTR/[bp]% coding sequence coefficient is higher in the I1 group (I1) than in I2 (0.03). Note that these results are in good agreement with the loadings of the PCA model.
We found an obvious functional difference between I1 and I2 groups in terms of expression pattern. We observed Moreover, other important observation is that all the Large Tandem Repeats of the I1 group genes are inside CpG islands while this fact is not observed in the I2 group. These results agree with those of Meguro et al. [11]: the CpG islands of imprinted genes contain some special DNA elements that distinguish them from CpG islands of biallelically expressed genes.
To identify sequence fingerprints and similarities among Large Tandem Repeats in the two imprinted groups, we used the Wilbur and Lipman pairwise sequence alignment method (see supplementary data for details). The I1 sequences group is quite consistent; all sequences are rich in GC content, and the similarity index of the aligned fragments ranges from 60 to 100%. In contrast, the sequences of the I2 group are longer, more heterogenous in terms of nucleotide composition; in some of them, the presence of a polyA motif Comparative and Functional Genomics 5 could be empathised. The I2 sequence repeats show a much more wide range of similarity index. In addition, because of some significant differences in nucleotide composition between members of I2 sequences, some I2 sequence pairs could not to be aligned. From this analysis, we can conclude that these two Large Tandem Repeats: GC-motifs (in I1 group) and AT-motifs (in I2 group) are highly conserved sequence patterns across their respective coding regions.
Then, we built a new model using another statistical technique: the quadratic discriminant analysis (QDA). QDA is also closely related to principal component analysis (PCA) in that both look for combinations of variables which best explain the data. QDA explicitly attempts to model the difference between the classes of data (supervised pattern recognition). PCA, on the other hand, does not take into account any difference in class (nonsupervised pattern recognition). Table 3 shows the results of the QDA classification model. The total percentage of correct classification was 93%, and the proportions for each group are 100% (I2), 92% (I1), 90% (NO I1) and 92% (NO I2).
After the employing of QDA and PCA methods, we proceeded to the validation of their respective classification models.
The cross-validation approach was used to validate the QDA model. The total percentage of correct classification was 83% (Table 3). Therefore, this result confirms the existence of four groups between the coding regions characteristics.
On the other hand, the test set approach was used to validate the PCA model. We decided to apply the PCA model to a series of new predicted imprinted genes whose imprinting status was predicted by other methodologies [16] but it is still not experimentally proved. In this way, apart from the construction of a representative test set, we could compare our PCA results with the ones of Luedi et al. [16].
To form a randomly test set, we did a full-text mining search with all Luedi's predicted gene names across the publication data of the Nutrigenomics Database (http://133.11.220.243/nutdb.html). After that, we formed a test group of 31 supposed imprinted genes related to nutrigenomics in humans (Table 4). It is important to emphasise that these possible imprinted genes are related with dietary factors known to influence DNA methylation as alcohol, folate, zinc, and cadmium. We thought that this fact may be interesting for future nutrigenomic work.
We calculated the genomic sequence characteristics of the 31 coding regions, and then we checked if our PCA pattern recognition model could classify them as imprinted genes, too. Figure 3 shows the results of the PCA calculations for the first (PC1) and second (PC2) principal components. Before carrying out the prediction calculations, the descriptors were also autoscaled as previously. We found that 27 of the 31 genes were classified in the two correct imprinted quadrants (84%) by the PCA model. The GFI1, HSPA6, HOXD9, PITX2, PTPRN2, GADD45G, GATA3, NRGN, F10, JAG2, GATA6, ELA2, and ZNF42 genes are classified Table 3: Classification obtained with the QDA analysis.   Group  I2  I1  NO I1  NO I2  count  18  12  21  51  Summary of classification  True group  Put into group  I2  I1  NO I1  NO I2  I2  18  0  2  3  I1  0  11  0  1  NO I1  0  0  19  0  NO I2  0  1  0    TLL1, NDUFSA4, ITGB8, CDK6, AKR1C2, KLRF1, KLRC3, POU4F1, and SFRS2 genes. Therefore, taking together these results and the ones of Luedi et al., we can suggest these 27 genes as good candidates for an experimental imprinting determination.

Conclusions
The most important feature of the present work is its ability to use multivariate analysis to look at variation, at coding region DNA level, among imprinted and non-imprinted genes. There is a force affecting genomic parameters that appears through the use of the appropriate multivariate methods (principle components analysis (PCA) and quadratic discriminant analysis (QDA) to analyse quantitative genomic data. We show that variables, such as, CG content, [bp]% CpG islands, [bp]% Large Tandem Repeats, and [bp]% Simple Repeats are able to distinguish human coding region imprinted genes.
We know that a conclusive assessment of prediction methods for imprinted genes is problematic due to the small number of affected genes, their clustering in small genomic regions, and the difficulty of experimental validation.
However, we think that the application of this PCA sequence analysis approach to genome-wide screening of human genes, which can be ranked to identify those with a sequence composition suggestive of imprinting, is potentially valuable for a first-stage approximation directing follow-up laboratory work.
Clearly an approach like this can be further refined and the resolution improved as more imprinted genes are identified and confirmed and the genome sequencing is completed.