Physical Characteristics of Tetrahydroxy and Acylated Derivatives of Jojoba Liquid Wax in Lubricant Applications

Jojoba liquid wax is a mixture of esters of long-chain fatty acids and fatty alcohols mainly C38:2–C46:2. The oil exhibits excellent emolliency on the skin and, therefore, is a component in many personal care cosmetic formulations. The virgin oil is a component of the seed of the jojoba (Simmondsia chinensis) plant which occurs naturally in the Sonora Desert in the United States and northwestern Mexico as well as in the northeastern Sahara desert. The seed contains 50–60% oil by dry weight. The plant has been introduced into Australia, Argentina, and Israel for commercial production of the jojoba oil. As a natural lubricant, we are seeking to explore its potential as a renewable industrial lubricant additive. Thus, we have chemically modified the carbon-carbon double bonds in the oil structure in order to improve its already good resistance to air oxidation so as to enhance its utility as well as its shelf life in nonpersonal care applications. To achieve this goal, we have hydroxylated its –C=C– bonds. Acylation of the resulting hydroxyl moieties has generated short-chain vicinal acyl substituents on the oil which keep the wax liquid, improving its cold flow properties and also protecting it from auto-oxidation and rancidity.


Introduction
e jojoba plant, Simmondsia chinensis (Link), is native to the Sonora Desert of northwestern Mexico, California and neighboring states [1]. It produces capsules with seeds which are rich in a unique oil that is actually a liquid wax. At the molecular unit, jojoba oil unlike most vegetable oils is not a triglyceride, that is, fatty acids esteri ed to a glycerol backbone. Rather, each molecule of this oil comprises a linear long-chain monoene fatty acid esteri ed to a long-chain monoene fatty alcohol giving rise to mainly C38:2-C46:2 liquid wax esters. e oil content of the seed is 50-60% by weight of dry matter [2][3][4][5][6][7][8]. Jojoba oil is highly emollient and lends itself to use as a component in myriads of personal care cosmetic formulations. Derivatization of this oil has been practiced for many years producing halogenated products from which polyunsaturated analogues of jojoba oil intermediates were generated for research and other needs [9][10][11][12][13]. Many more potential uses of the oil have been anticipated including biodiesel manufacture [14], but suitability of this oil for use as a fuel is questionable technically unless it is cracked to shorter chain-length intermediates. Because of its natural lubricating character, it has been explored as an anticorrosive agent for iron [15]. Although jojoba oil has enormous use potential, its drawback is its expensiveness arising from the limited commercial volume of oil available. To o set this, handicap plantations for commercial production of jojoba oil are developing in Argentina, Australia, Israel, and elsewhere on semiarid lands [12]. Recent e orts to explore synthetic and enzymatic development of jojoba-like mimics or analogue esters are yet other approaches aimed at narrowing the availability gap [16,17]. e latter approaches will become more practical when long-chain fatty acids from oilseed crops are commercially available using developing improved separation techniques for such oils. e ready availability of these long-chain fatty acids and fatty alcohols as synthons will greatly facilitate synthetic approaches to jojoba-like esters. In the current study, the aim is to tap the natural emolliency of the oil into an improved cold ow-modi ed jojoba oil in the form of the acetate, propionate, and valerate esters that act as lubricant additive agents for base lubricant oils.  [20]. Details of the test procedure have been given before [21]. e instrument is tted with a computer and appropriate software to allow for data acquisition and analysis. Tests were conducted with the cell pressurized with pure oxygen to 500 ± 25 psig in the dynamic mode, that is, with a positive oxygen ow rate of 100 ± 10 mL/min. Duplicate runs were conducted, and average values of onset temperature (OT) and peak temperatures (PTs) are reported. (f) Four-ball (4-ball) tribological test instrument: tests were conducted on a model KTR-30L 4-ball tribometer (Koehler Instrument Company, Bohemia, NY), equipped with TriboDATA software (Koehler Instrument Company, Bohemia, NY). Details of the instrument hardware and software can be found elsewhere [22]. (g) Four-ball antiwear (AW) tests: antiwear tests were conducted according to ASTM D 4172-94 [23]. e coe cient of friction (COF) from each test was calculated from the corresponding torque and load data in accordance with the ASTM D 5183 procedure [24]. After each test, the wear scar diameters along and across the wear direction of the three bottom balls were measured using a wear scar measurement system comprising hardware and ScarView software (Koehler Instrument Company, Inc., Bohemia, NY). Each test lubricant was used in at least two AW measurements, and average COF and wear scar diameter (WSD) values are reported. (h) Four-ball extreme pressure (EP) tests: extreme pressure tests were conducted according to ASTM D 2783 [25]. e method involves a series of 10-second tests, conducted with progressively increasing load, until welding of the four balls is observed. e load at which welding occurs is reported as the weld point of the lubricant tested. Weld point is an inherent property of lubricants and higher weld point corresponds to superior EP property.

Synthesis of Tetrahydroxy Jojoba
Oil. Jojoba oil (241.5 g, 391.7 mmol) based on the C42 content was placed in a dry 1.0 liter jacketed reaction vessel equipped with an overhead stirrer. e oil was stirred vigorously at 40°C, and formic acid (36.6 g, 795 mmol) was added in one portion. Hydrogen peroxide (50%, 80 g, 3.35 mol) was then added dropwise to the reaction mixture. At the end of peroxide addition, the temperature was raised to 70°C, and the progress of the reaction was monitored at 30 min intervals by FT-IR spectrometry of withdrawn samples. Progress in attenuation of the 3010-3006 cm −1 band of the ole n with time and increasing formation of the oxirane band around 840 cm −1 was monitored in 30 min intervals of the reaction. e reaction was judged complete in about 3 h. Heating was then discontinued, allowing the mixture to cool to near room temperature whence it was transferred into a separatory funnel for phase separation. e aqueous layer was removed and discarded. An aliquot of the organic phase (oxirane) was removed for analysis ( Figure 1), whereas the bulk of the organic layer was returned to the reaction ask to which 300 mL of 6 M HCl was added.
is mixture was stirred and heated to 70°C to ring-open the oxirane. At disappearance of the 847 cm −1 band, heating was discontinued and the mixture cooled and transferred into a beaker of saturated NaHCO 3 solution. After cessation of e ervescence, the mixture was poured into a separatory funnel and the layers were allowed to separate. e aqueous layer was removed and extracted with 2 × 100 mL of ethyl acetate. e acetate extract was combined with the organic phase and washed with brine, and the organic layer was dried over MgSO 4

Acetylation of Tetrahydroxy Jojoba
Oil. Tetrahydroxy jojoba oil (178.7 g, 251.4 mmol), acetic anhydride (216.0 g, 2.12 mol), and p-toluene sulfonic acid (1.0 g) were placed into a ame-dried 1.0 liter round-bottomed ask (RBF) tted with a heating mantle, a magnetic stir bar, and a re ux condenser protected with a drierite tube. e reaction mixture was stirred and heated to gentle re ux overnight. e reaction was stopped when FT-IR spectrum of a worked up sample of the reaction mixture showed no (OH) absorbance. e product mixture was cooled, diluted with ethyl acetate, and poured into stirring saturated NaHCO 3 solution. More solid NaHCO 3 was added until no more e ervescence occurred. e mixture was then poured into a separatory funnel and partitioned. e aqueous layer was then re-extracted with ethyl acetate (2 × 100 mL); this extract was combined with the organic phase, washed with brine, and dried over MgSO 4 . e dried material was ltered and concentrated under reduced pressure to give 188.7 g (98%), d23°C 1

Propionate Ester of Tetrahydroxy Jojoba Oil.
Tetrahydroxy jojoba oil (49.8 g, 72.5 mmol) was placed in a ame-dried 250 mL RBF containing a magnetic stir bar and p-TsOH (0.5 g) as a catalyst. To the mixture, propionic anhydride (97%, 100 mL, 101 g, 0.78 mol) was added in one portion. A water-cooled re ux condenser with a drying tube was attached, and the reaction mixture was stirred and gently heated overnight as in the acetate above. When an assayed sample of the reaction mixture showed no OH absorbance in its FT-IR spectrum, propanoylation of the starting substrate was judged complete and the heat source was removed. e reaction mixture was allowed to cool to near room temperature whence it was poured into saturated NaHCO 3 solution. More bicarbonate was added into the workup mixture until no e ervescence was observed. e mixture was then transferred into a separatory funnel, and the partitioned layers were separated. e aqueous phase was extracted with EtOAc (100 mL × 2), and the extract was combined with the organic phase. e latter phase was washed twice with brine, dried over MgSO 4

Valeroylation of Tetrahydroxy Jojoba Oil.
Tetrahydroxy jojoba oil (77.0 g, 125 mmol), valeric anhydride (97%, 100 g, 0.537 mol), and p-TsOH (0.84 g) were placed in a dry 500 mL round-bottomed ask equipped as in (a) above and heated to gentle re ux as for the acetate. Heating was stopped when a worked up sample of the reaction mixture showed no (OH) stretching mode of the starting tetrahydroxy substrate in the FT-IR spectrum. e cooled reaction mixture was poured   30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15   into a beaker containing a 40/60 mixture of Na 2 CO 3 /NaCl saturated solutions. Ethyl acetate was added to facilitate separation of the phases. is mixture was washed for the third time with saturated bicarbonate to decompose and remove residual unreacted valeric anhydride. e organic phase was dried over anhydrous MgSO 4 and concentrated to give 93.0 g (95%); d 23°C

Dynamic Rheological Property Measurements.
Linear viscoelastic properties were conducted with a strain-controlled Rheometric ARES-LSM rheometer (TA Instruments, Piscataway, NJ). A torsion rectangular geometry was used to study thermomechanical properties of the tetrahydroxy jojoba wax sample. e strain sweep experiments were conducted at 1 rad/s in a strain range of 0.02-20% at −20°C to 80°C, respectively, to identify the linear range of the material. An applied shear strain valued in the linear range was adopted for the other viscoelastic property measurements. Linear viscoelasticity indicates that the measured parameters are independent of the applied shear strain. Small-amplitude oscillatory shear experiments were conducted over a frequency (ω) range yielding the shear storage (G′) and loss (G″) moduli. e storage modulus represents the nondissipative component of mechanical properties. Elastic or "rubber-like" behavior is suggested if the G′ spectrum is independent of frequency and greater than the loss modulus over a certain range of frequencies.
e loss modulus represents the dissipative component of the mechanical properties and is a characteristic of viscous ow. e phase shift or phase angle (δ) is de ned by δ � tan −1 (G″/G′) and indicates whether a material is solid with perfect elasticity (δ � 0°), or liquid with pure viscosity (δ � 90°), or something in between (0 < δ < 90°). e temperature ramp measurements were conducted in a range of −20°C to 80°C with the heating rate of 2°C/min at 1 rad/s frequency and 0.05% strain. e dynamic frequency sweep experiments were carried out at 25°C and 70°C, respectively, at 0.05% strain in a frequency range of 0.1 to 100 rad/s. e terminal methyl protons are observed as a triplet (J � 6.6, 7.1 Hz, 6H) at 0.89 ppm. e corresponding 13 C spectrum (Figure 1(b)) a rmed the proton spectrum. Hydration of the jojoba oil to the tetrahydroxy jojoba intermediate was via the oxirane which was carried out in a one-pot reaction. e oxirane was characterized from a sampled aliquot by its FT-IR spectrum having an additional relatively strong singlet asymmetric absorption band at 847 cm −1 and a H-C-O-C-H stretch at 2985 cm −1 (Figure 2(a)). is 847 cm −1 band of the diepoxy jojoba oil is in contrast to epoxy triglycerides which consistently give an asymmetric doublet at 825-845 cm −1 . Also, in contradistinction to triglycerides, jojoba oxirane showed a rather broad 1 H singlet at 2.87 ppm for protons in the threemembered rings and a strong single line for the corresponding ring 13 C spectrum at 57.12 ppm in contrast to the multiple lines in the 57 to 53 ppm spectral region in triglycerides [26,27]. At room temperature, both the oxirane and tetrahydroxylated jojoba intermediates are colorless low-melting solids. e tetrahydroxy material gave a characteristically broad (OH) absorption band centered at 3438 cm −1 in its mid FT-IR spectrum. e other diagnostic FT-IR bands of the hydroxylated oil include the 2962, 2929 cm −1 asymmetric stretch of the -CH 3 and -CH 2− , respectively, and the 2874 and 2855 cm −1 symmetric stretching modes for the -CH 3 , -CH 2− , respectively. A strong ester carbonyl band is observed at 1742 cm −1 , a -CH 2deformation at 1470 cm −1 and the -CH 3 deformation at 1374 cm −1 . e oxirane bands at 847 cm −1 and 2985 cm −1 are absent in the tetrahydroxy material. e 1 H NMR spectrum of the tetrahydroxy jojoba oil was characterized by the presence of additional protons, multiplets at 3.85, 3.58, and 1.78 ppm, integrating to 2H, 2H, and 4H, respectively ( Figure 3). ree clean triplets are anticipated in the proton spectrum as also observed in the unmodi ed oil. e most down eld of these is at 4.02 ppm t (J � 6.8 Hz, 2H) assigned to H-23 ( Figure 1). e second triplet is observed at 2.25 ppm t (J � 7.5 Hz, 2H) assignable to the methylene protons H-2, whereas the overlapping terminal methyl groups are observed at 0.85 ppm t (J � 6.6, 7.1 Hz, 6H) slightly up eld from those of the unmodi ed starting jojoba oil which resonate at 0.90 ppm.

Results and Discussion
e other observed resonances include the multiplet at 3.90 ppm for the methine protons and the multiplets of the methylene protons in the rest of the long chain: 1.79 ppm m (4H), 1.52 ppm m (10H), 1.40 ppm bm (5H) ,and at 1.25 ppm bs (50H). Some observed behavioral characteristics of the tetrahydroxy jojoba oil are the following: when freshly synthesized, it crystalizes to a white solid on cooling to room temperature, but this solid readily melts on warming to 35-40˚C. Stored at room temperature for a long time period, it cures to a brittle waxy solid with rubbery characteristics. In the latter condition, the tetrahydroxy jojoba wax fails to melt even at 200°C when decomposition seems to set in from the Journal of Analytical Methods in Chemistry emitted odor. In this rubbery condition, the solid has a tendency toward low solubility in organic solvents. is behavior could be attributable mainly to intra-or intermolecular hydrogen bonding in the hydroxylated structure. An attempt to acylate a long-sitting waxy sample of the tetrahydroxy material was only partially successful on account of its resistance to solubilization even in the hot anhydride. On the other hand, acylation of the freshly prepared tetrahydroxy jojoba intermediate to the tetraacylates was essentially quantitative using the respective anhydrides catalyzed by p-TsOH. e derivatized tetraacylates are light red to light yellow clear liquids at room temperature with densities slightly > 1.00 g/mL around room temperature. e FT-IR, 1 H, and 13 C spectral characteristics of these derivatives are summarized in Tables 1 and 2. Table 1 shows the FT-IR absorbance data of the starting oil through the tetrapentanoate. In the tetraacetate, the methyl and methylene asymmetric stretching bands are observed at 2959 and 2925 cm −1 , respectively, whereas the symmetric absorption bands are observed at 2874 and 2855 cm −1 , respectively. e 1 H and 13 C NMR spectra of this product on one hand show resonances at 5.0 ppm for the methine protons; a triplet at 4.02 ppm (J � 6.7 Hz, 2H) is assigned to the oxygen-bearing methylene group of the fatty alcohol moiety. e resonance at 3.79 ppm, multiplet (2H) is assignable to the pair of oxygen-bearing methine groups on each segment of the oxidized molecule, while the triplet at 2.26 ppm (J � 7.5 Hz, 2H) is assigned to the methylene group proximal to the acyl carbon. e methyl protons of the acetoxy substituent are a strong singlet observed at 2.07 ppm.
is resonance accounts for 6H of the 12H in each molecule of the derivative most probably due to symmetry reasons. e terminal methyl protons are observed at 0.85 ppm t (J � 6.7 Hz, 6H), and the corresponding terminal methyl carbons are observed at 14.04 ppm, whereas the 13 C resonance at 20.86 ppm is assigned to the acetate substituent methyl groups (Table 2). In the tetrapentanoate compounds, the methine protons resonate at 5.05 ppm as a multiplet (2H), while its most down eld methylene protons as in the acetoxy compounds are those of the esteri ed fatty alcohol contiguous to the parent ester carboxyl oxygen and are observed at 4.05 ppm, t (J � 6.7, 6.8 Hz, 2H) compared to 4.02 ppm in the tetraacetate.

Rheology.
e linear viscoelastic behavior of aged tetrahydroxy jojoba wax with the temperature sweep measurements is shown in Figure 3. e storage modulus was higher than the loss modulus in the entire measured   temperature range from −20°C to 80°C. Both moduli had a sharp decrease in the temperature range of 35°C to 55°C, which indicated the material behavior changing from a hard brittle state to a relatively rubbery state-glass transition. e glass transition temperature was 47.8 ± 1.7°C. To explore the linear viscoelastic properties of this material at both hard brittle state and the rubbery state, dynamic small-amplitude oscillatory shear experiments were conducted at lower temperature (25°C) and at higher (70°C) than the glass transition temperature. At 25°C, which was lower than the glass transition temperature, the tetrahydroxy jojoba wax exhibited strong viscoelastic solid behavior (Figure 4). Curves of both the storage and loss moduli were nearly independent of measured frequencies and were parallel. e storage modulus at 1.0 rad/s was 4.1 ×10 6 Pa ( Figure 4). e phase shifts were almost constant, in a range of 4.1°to 4.9°, within the measured frequency range, indicating pretty brittle behavior. e G′ of highly cross-linked rubber is around 10 7 Pa, and the phase shift is around 11°at room temperature [28]. erefore, the aged tetrahydroxy jojoba wax showed similar storage modulus as rubber but a much smaller phase shift at 25°C. is result suggested that the aged tetrahydroxy jojoba wax should have similar elasticity as the rubber-like material but exhibits much more brittle property than rubber at temperatures lower than its glass transition. At 70°C, which was higher than its glass transition temperature, the tetrahydroxy jojoba wax still exhibited viscoelastic solid behavior ( Figure 5). e storage moduli (G′) were greater than the loss moduli (G″) within all measured frequencies. e curve of the storage modulus was still frequency independent over the three measured frequency decades. e values of G′ at 70°C were much lower than those at 25°C (Figures 4 and 5). e storage modulus at 1 rad/s was 1.3 × 10 5 Pa at 70°C. e curve of the loss modulus was dependent on frequency, and the phase shifts had a wider range of 2.3°to 10.4°, which indicated that the tetrahydroxy jojoba wax exhibited a little more viscous behavior at 70°C than at 25°C. is result suggested that at temperatures higher than the glass transition, the tetrahydroxy jojoba wax should show more uid-like behavior than at temperatures lower than its glass transition.
For the tetraacetate derivative of jojoba wax, the linear dynamic frequency sweep measurements at 25 o C are shown in Figure 6. Both curves of storage modulus (G′) and loss modulus (G″) were very frequency dependent; and G″ was higher than G′ within the measured frequency range (Figure 6). e loss moduli (G″) followed a nearly straight line with a slope of one, which indicated that the sample exhibited viscoelastic uid properties and was very close to that of a viscous uid behavior [29]. e G′ at 1 rad/s for the tetraacetate was 0.13 Pa at 25 o C, indicating very small elasticity ( Figure 6). e phase shifts for the sample were in the range of 81.4 o to 88.1 o , which suggests the sample to be a uid-like material. e nonlinear steady shear viscoelastic property and a power law constitutive equation tting the tetraacetate sample are shown in Figure 7. e sample exhibited a behavior very close to a Newtonian uid and very slight shearthinning (Figure 7). From the tting data, we can see that the sample possesses power law exponent (n) of 0.98, which is nearly the same as the Newtonian uid behavior (n � 1). e nonlinear steady shear viscoelastic property and a power law constitutive equation tting for this sample are shown in Figure 7. e sample exhibited a behavior very close to the Newtonian uid and very slight shear-thinning (Figure 7). From the tting data, we can see that the jojoba tetraacetate sample possesses a power law exponent (n) value of 0.98, which is nearly the same as the Newtonian uid behavior (n � 1).

Physical and Tribological
Evaluations. As explained above, jojoba was chemically modi ed by converting its double bonds into ester branches of varying chain length.
Understanding the e ect of such modi cations on tribological and other properties is of immense importance. In   Journal of Analytical Methods in Chemistry light of this, jojoba and its derivatives were evaluated for their physical and tribological properties using a variety of methods. ese evaluations were conducted on the neat oils as well as on blends of the neat oils in biobased and petroleum-based base oils. e blend investigations are intended to evaluate the potential of jojoba and its derivatives to be used as additives in lubricant formulations. e neat and blend investigations are discussed separately. Table 1 compares the physical properties of the jojoba oil with its acetate, propionate, and valerate derivatives. e rst property investigated is solubility. Ample solubility is essential to allow the material to be used in blends with biobased and petroleum-based base oils as well as an additive in lubricant formulations. As shown in Table 1, chemical modi cation of the jojoba oil did not adversely a ect solubility in the biobased high-oleic sunower oil (HOSuO) or in the petroleum-based polyalpha ole n (PAO-6) base oils. e only exception is the acetate derivative, which displayed low solubility in PAO-6. is can be attributed to the vast di erence in the polarity between PAO-6 and the acetate derivative. e acetate, because of its short chain, results in a more polar oil than the jojoba oil or the other two ester derivatives. Since PAO-6 contains no functional group, it is very nonpolar and is incompatible with the acetate derivative, which is the most polar of the four oils investigated.

Neat Oil Properties.
Jojoba esters displayed higher density than jojoba by at least 0.1 g/mL. e density of jojoba esters increases with decreasing ester chain length, which corresponds with increasing polarity. e e ect can be attributed to increased intermolecular (polar) interaction with decreasing chain length, resulting in reduced speci c volume.
Chemical modi cation of the jojoba oil also resulted in higher kinematic viscosity (1.3 to 20-fold relative to unmodi ed material) that varied with the ester chain length. e observed kinematic viscosity increased in the following order: jojoba oil < jojoba propionate < jojoba valerate < jojoba acetate. Increase in viscosity can be attributed to increases in polarity and molecular weight as a result of the chemical modi cation. It appears that polarity might be the predominant factor for the acetate derivative, whereas molecular weight might be the predominant factor for the valerate derivatives.
In general, chemical modi cation resulted in reduced viscosity index (VI) of all the jojoba esters. e reduction was most severe for the acetate derivative, which gave a value that was less than half of that for the unmodi ed jojoba oil (Table 1). e reduction was less severe for the other two derivatives. e observed VI values varied with substituent chain structure and increased in the following order: jojoba acetate < jojoba valerate < jojoba propionate < jojoba. e e ect of chemical modi cation on cold ow properties is summarized in Table 2. e data show good improvement in cloud point and an excellent improvement in pour point due to esteri cation.
us, relative to the jojoba oil, the esters displayed a reduction of 10-17°C in the cloud point and a reduction of 56-63°C in the pour point. Even though the introduction of side chain was expected to improve ow properties by suppressing the tendency of the oil to crystalize, such a large e ect on the pour point was not predictable. Such low pour point values are usually observed for selected synthetic petroleum-based base oils, such as PAOs, and very few biobased synthetic oils without pour point depressant additives [30].
us, these ester modi cations help overcome one of the major drawbacks of biobased base oils related to poor cold ow properties without the use of pour point depressants.  Journal of Analytical Methods in Chemistry Table 2 also compares the onset (OT) and peak (PT) oxidation temperatures of the jojoba ester derivatives relative to the unmodi ed jojoba oil. As expected, the conversion of the double bonds in the jojoba oil to the esters resulted in improved oxidation stability as shown by the increase in OT and PT values of the modi ed oils. e modi cation of jojoba removes reactive allylic and bis allylic protons which causes oxidation reactions to occur. As a result, OT and PT values increased by ≥ 15°C, which is a signi cant improvement and helps overcome the second major drawback of biobased oils related to oxidative stability. us, the conversion of the jojoba oil to the corresponding esters results in biobased base oils with the highly improved pour point and oxidation stability.
Tribological properties of the neat jojoba oil and its ester derivatives are compared in Table 3. e evaluation was conducted on a 4-ball tribometer under antiwear (AW, ASTM D-4172) and extreme pressure (EP, ASTM D-2783) conditions. e antiwear investigation showed that the coe cient of friction (COF) of the jojoba esters was lower than that of the unmodi ed jojoba oil and varied with the ester structure. e COF increased with increasing ester chain length as follows: jojoba acetate < jojoba propionate < jojoba valerate < unmodi ed jojoba oil. e wear data, which are expressed in terms of wear scar diameter (WSD), showed that the esters have poorer wear property than the unmodi ed jojoba oil, which also varied with ester chain length. us, the WSD of the modi ed esters decreased with increasing ester chain length in the following order: jojoba acetate > jojoba propionate > jojoba valerate > unmodi ed jojoba oil.    e EP investigation showed a slight improvement in EP properties due to the chemical modi cation of jojoba to esters. us, the weld point of the jojoba oil increased from 120 kgf before chemical modi cation to 140-160 kgf for the esters (Table 3). e slight improvement in weld point can be attributed to the slightly higher molecular weight of the esters. Such low weld point results are expected since jojoba oil or its esters contain none of the EP active elements (e.g., S, P, and Cl) in their structures [31].

Blend Properties.
Jojoba oil and its ester derivatives were also investigated for their additive properties in PAO-6. Of particular interest is the e ect of these biobased materials on the viscosity and viscosity index (VI) of PAO-6. Blends with up to 10% (w/w) of jojoba and its derivatives in PAO-6 were investigated. e resulting data are compared to the values for the neat oils in Tables 4-7.

Disclosure
Mention of trade names or commercial products in this publication is solely for the purpose of providing speci c information and does not imply recommendation or endorsement by the U.S. Department of Agriculture. e USDA is an equal opportunity provider and employer. An abstract of the subject matter of this manuscript had earlier been presented orally at an Annual Conference of the Society of Tribology and Lubrication Engineers (STLE) in the Non-Ferrous Metal Session.

Conflicts of Interest
e authors declare that they have no con icts of interest.