CdIn2S4 was prepared by ultrasonic spray pyrolysis. The prepared CdIn2S4 was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FSEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and N2-sorption techniques. Aqueous photocatalytic activity was evaluated by the decomposition of methyl orange under visible light irradiation. The results indicate that the prepared CdIn2S4 has spherical morphology with mesoporous structure which can efficiently degrade methyl orange in water. The sample prepared at 500°C exhibits the optimized photocatalytic activity.
1. Introduction
Azo dyes, a large class of synthetic organic dyes that contain nitrogen as the azo group –N = N– as part of their molecular structures. More than half the commercial dyes belong to this class which have been widely used in many industries such as the production of textiles, paint, ink, and cosmetics [1]. The effluent from azo dyes industries contains substantial amounts of such dyes and their breakdown products, which causes coloration of water and poses a threat to aquatic life [2–4], mutagenic/carcinogenic [5], and genotoxic [6]. Therefore dyes effluent poses a great threat to the environment and increasing attention has been paid to the treatment of dye effluent. While due to the complex aromatic structure and stability of these dyes, conventional biological treatment processes are ineffective for their degradation [7]. The absorption and coagulation processes are only able to absorb them up to some extent, but the sludge produced from both processes becomes more difficult to be disposal [8].
In the past several decades, semiconductor-mediated photocatalytic oxidation has been proved to be a promising technology for the treatment of water containing azo dyes [9]. Among a variety of semiconductor materials, the titanium dioxide (TiO2) photocatalysts have been most extensively investigated and used because of their physical properties and economic advantages, such as high redox power, photo-stability, chemical inertness, and cheapness [10]. However, TiO2 can only absorb a very small ultraviolet part (3-4%) of solar light because of its wide band gap (3.2 eV for anatase) which constrains the extensive applications of TiO2. Thus, considerable efforts have been devoted to develop new visible responded photocatalyst which is still a significant issue in both academic and practical applications.
Among various new photocatalysts, multinary chalcogenide semiconductors have attracted great attention because of the instability of the mono- and binary chalcogenide compounds [11–14]. Cadmium indium sulphide (CdIn2S4) belonging to ternary semiconductors of chalcogenide AB2X4 and being considered to have potential applications in optical devices, solar cells [15] and photocatalysts for H2 evolution, bacterial inactivation, and organic pollutant elimination [16–18]. Considering the advantages of nanostructures over the bulk materials, attempts have been made to synthesize CdIn2S4 with variety of nanostructures. Up to now, the nanostructural CdIn2S4 has been synthesized by methods like hydrothermal [15, 19], microwave [20], and sol-gel [21] with template. In most cases, these techniques require high temperature or high pressure to obtain crystalline material. In addition, the removal of the templates requires additional processing steps that can be costly and wasteful. Thus, a high-yield synthetic and template-free method for the CdIn2S4 preparation can undoubtedly benefit the design of high-performance materials in catalytic applications. Recently, ultrasonic spray pyrolysis technique (USP) is particularly attractive. It is fast, inexpensive, vacuumless, and suitable for mass production [22–24]. In the previous work, we have demonstrated that the USP method is a common method to prepare multinary sulfide [25].
In present work, the CdIn2S4 microspheres were synthesized using USP process. The effect of reaction conditions on the prepared CdIn2S4 was studied. The obtained microspherical CdIn2S4 was used as photocatalyst to oxidize azo dyes in aqueous solution.
2. Experimental Section2.1. Catalysts Preparation
All of the reagents were of analytical grade and used without further purification. The CdIn2S4 photocatalyst was prepared by a USP method. In a typical synthesis, 0.532 g Cd (AC)2·2(H2O), 1.2 g InCl3(H2O)4, and 0.76 g CH4N2S were added into 150 mL water under magnetic stirring to form a transparent solution. The solution was nebulized at 1.7 MHz ± 10% (YUYUE402AI, Shanghai) and then carried by air with a flow rate 10 L/min through a quartz tube surrounded by a furnace thermostated at 500~700°C. The quartz reaction tube with the diameter of 3.5 cm was 1 m long. The products were collected in a percolator with distilled water, separated by centrifugation, and washed thoroughly with ethanol and distilled water. The product was finally dried in an oven at 60°C for overnight.
2.2. Characterization
Powder X-ray diffraction (XRD) patterns were collected in θ-θ mode using a Bruker D8 Advance X-ray diffractometer (Cu Kα1 irradiation, λ=1.5406Å). The morphology of the sample was investigated by field emission scanning electron microscopy (FSEM) (JSM-6700F). Transmission electron microscopy (TEM) was recorded on a FEI Tecnai 20 microscope. Carbon-coated copper grid was used as the sample holder. The sample was suspended in ethanol solution, followed by sonication for 30 min in the ultrasonic bath. Drops of the suspensions were applied on a copper grid coated with carbon. Nitrogen sorption experiments were carried out at 77 K by using Micromeritics ASAP 2020 equipment. All the samples were degassed at 140°C and 10−6 torr for 6 h prior to the measurement. The UV-visible diffuse reflectance spectra were performed on a Varian Cary 500 spectrometer with an integrating sphere attachment ranging from 200 nm to 800 nm. BaSO4 was used as a reference sample in these measurements.
2.3. Evaluation of Photocatalytic Activity
The photocatalytic activities of the samples were evaluated by the decomposition of methyl orange (MO) a typical azo dye in aqueous solution. Catalyst (0.05 g) was suspended in a 100 mL Pyrex glass vessel containing MO with a concentration of 25 ppm. The visible light source was a 300 W halogen lamp (Philips Electronics) positioned beside a cylindrical reaction vessel with a flat side. The system was water-cooled to maintain the temperature. A 400 nm cutoff filter was placed in front of the vessel to ensure irradiation by visible light. The suspension was stirred in darkness for 1 h to achieve adsorption equilibrium and the reactor was irradiated to induce photocatalyzed decomposition reactions. At given irradiation time intervals, 3 mL of the reaction suspension was collected and centrifuged to remove the catalyst. The degraded solution was analyzed using a Varian Cary 50 Scan UV-Vis spectrophotometer.
3. Results and Discussion3.1. Crystal Structure
The X-ray diffraction (XRD) patterns of the resultant products synthesized from USP process at different temperature are shown in Figure 1. The XRD patterns of the sample prepared at 700°C can be indexed to cubic CdIn2S4 well consistent with the reported data (JCPDS number 27-60, space group: Fd-3 m). The peaks at 2θ values of 23.18, 27.25, 28.48, 33.00, 40.74, 43.31, and 47.40 match well with the (220), (311), (222), (400), (422), (511), and (440) crystal planes of CdIn2S4, respectively. There is no any trace of impurity phase such as CdS, In2S3 under the instrument resolution, indicating the high purity of the sample. Furthermore, the intensity of the peaks according to CdIn2S4 is affected by the preparation temperature. The XRD pattern for the sample prepared at 500°C shows broad noisy peaks means the semi crystalline nature of the sample. The intensity of peaks is increasing with the increasing of temperature. This suggests that the crystalline of CdIn2S4 increases with the increase of temperature. The calculated average crystal sizes of the samples prepared at 500, 600, and 700°C using the Scherrer equation are 5.4, 8.4, and 14.2 nm, respectively.
XRD patterns of CdIn2S4 prepared at different temperatures.
3.2. Morphology
Figure 2 depicts the FSEM images of prepared samples. Figure 2(a) is the low-magnification image of the sample prepared at 500°C which indicates that the as-prepared samples consist entirely of spheres with a range of 100 nm to 1.5 μm. The ultrasonic nebulizer during the preparation is the key to form the spherical morphology. The aerosol produced from nebulizer consisted of numerous small liquid droplets which contained the precursor. These droplets would serve as microreactors and yield one spherical particle per droplet. The size of droplet and concentration of precursor determines the product dimension [26]. When these droplets are carried into the tubular reactor with air, the water in the droplet is heated and evaporating. At the same time, the thiourea in the droplet would decompose quickly and release H2S which would react with the metal precursor quickly and generate submicrospherical CdIn2S4. The excess H2S from thiourea will be absorbed by the water in the percolator which will not be released out of system. Figure 2(b) is the magnified surface morphologies of samples prepared at 500°C which shows the porous structure of sample. The porous structure will not be destroyed even prepared at high temperature of 700°C (see Figure 2(c)). The result also shows that the sample prepared at 500°C has a crude surface compared with the sample prepared at 700°C. This can be due to the larger catalyst particles for the sample prepared under higher temperature.
The FSEM images of CdIn2S4 prepared by ultrasonic spray pyrolysis. (a) and (b) 500°C, (c) 700°C.
The TEM image of CdIn2S4 sphere in Figure 3 confirms that the prepared spheres are composed of small nanoparticles and have porous structure. The porous structure will endow the CdIn2S4 with more active points and larger light-harvesting ability which will benefit its photocatalytic performance. The composition of CdIn2S4 sphere was determined by energy dispersive X-ray spectroscopy (EDX) in the “A” position of Figure 3. The results of EDX analysis (Figure 4) imply that the as-prepared samples contain In, Cd, S, and a small amount of Cl element. The ratio of In to Cd in the microspheres is 1.95 which is very close to the atom ratio in CdIn2S4. The small amount Cl element is from the precursor of InCl3(H2O)4 which is not completely removed during the washing of product.
The TEM images of CdIn2S4 prepared at 500°C.
Energy-dispersive X-ray analysis spectra of CdIn2S4 prepared at 500°C.
3.3. Optical Properties
Figure 5 shows the light absorption properties of prepared samples. All the samples show remarkable absorption in the visible light region. Besides, the basic adsorption edge of the CdIn2S4 is shifted to shorter wavelength with the decreasing of temperature in preparation. The absorption edges of CdIn2S4 prepared at 500, 600, and 700°C are 522, 528, and 541 nm corresponding to a band gap of 2.38, 2.35, and 2.29 eV, respectively. The blue shifts of adsorption edge are due to the quantum confinement effect, which is attributed to the smaller crystal size of CdIn2S4 prepared in low temperature.
Diffuse reflectance UV-Vis spectra of CdIn2S4 prepared at different temperature.
3.4. Specific Surface Area and Pore Structure
Figure 6 shows the nitrogen adsorption-desorption isotherms of the CdIn2S4 prepared at different temperature. All the samples show similar type-IV isotherms, which are representative of mesoporous solids. In addition, the surface area, pore size, and pore volume (see Table 1) have no significant difference for the samples prepared in the different temperature. This indicates that the mesoporous structures was not destroyed or did not shrink in the high temperature which is consistent with the result of SEM in Figure 2.
Crystalline and porous properties of CdIn2S4 prepared at different temperatures.
Temperature (°C)
da (nm)
Pore sizeb (nm)
Surface areac (m2g−1)
Pore volumed (cm3g−1)
500
5.4
13.5
36.1
0.15
600
8.4
13.5
34.5
0.15
700
14.2
13.6
33.5
0.15
ad values of the samples estimated by Scherrer formula; bBJH pore sizes determined from the nitrogen desorption branches; cBET surface areas determined from the nitrogen adsorption and desorption isotherm measurement; dpore volumes is the BJH desorption cumulative pore volume of pores.
N2 adsorption-desorption isothermal curves of CdIn2S4 prepared at different temperatures (a) 500°C, (b) 600°C, and (c) 700°C.
3.5. Photocatalytic Activity
Figure 7 shows the photocatalytic degradation of methyl orange (MO) on CdIn2S4 microspheres with otherwise identical conditions under visible-light irradiation (λ>400 nm) after the adsorption desorption equilibrium was reached. The control test (without catalyst) under visible light irradiation showed that the photolysis of MO was negligible. The dark control experiment with CdIn2S4 prepared at 500°C alone reveals that the concentration of MO was also unchanged after 3 hours, which demonstrates that the adsorption/desorption equilibrium had been obtained after 1 hour in dark and the CdIn2S4 microspheres would not react with MO. The MO was degraded quickly in the presence of CdIn2S4 under visible light irradiation and indicates the high photocatalytic activity of CdIn2S4 microspheres. The test also shows that the activities of doped samples were greatly influenced by the prepared temperature. The complete degradation of methyl orange for samples prepared at 500, 600, and 700°C needs 60, 100, and 160 min, respectively. Considering the similar surface area and pore structure among different samples, the higher photocatalytic activity for the sample prepared at 500°C can be due to the small crystal size which is of benefit to the separation of excited electron/hole pair during photocatalytic reaction.
Photocatalytic activity of the CdIn2S4 sphere samples.
4. Conclusions
The CdIn2S4 have been synthesized by using ultrasonic spray pyrolysis process without using any template. The prepared samples have spherical morphology with mesoporous structure whose products can be generated continuously at a rate of several grams per hour. The prepared CdIn2S4 exhibited excellent photocatalytic activity. We expect that these CdIn2S4 spheres prepared with this method will have immense importance in other regions such as solar cells, LED, and optoelectronics.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (21103095), the Excellent Young Scientific Research Talents in University of Fujian, China (JA12285), the Education and Scientific Project for the Young and Middle Aged Teachers of Fujian, China (JA13279), and Scientific Project of Putian Science and Technology Burea (2013S03(3)).
SahooC.GuptaA. K.PalA.Photocatalytic degradation of Methyl Red dye in aqueous solutions under UV irradiation using Ag+ doped TiO220051811–3911002-s2.0-2764444529210.1016/j.desal.2005.02.014WangC.YedilerA.LienertD.WangZ.KettrupA.Toxicity evaluation of reactive dyestuffs, auxiliaries and selected effluents in textile finishing industry to luminescent bacteria Vibrio fischeri20024623393442-s2.0-003614163310.1016/S0045-6535(01)00086-8EssawyA. A.AliA. E.-H.Abdel-MottalebM. S. A.Application of novel copolymer-TiO2 membranes for some textile dyes adsorptive removal from aqueous solution and photocatalytic decolorization20081572-35475522-s2.0-4684911942510.1016/j.jhazmat.2008.01.072WangC.YedilerA.LienertD.WangZ.KettrupA.Ozonation of an azo dye C.I. Remazol Black 5 and toxicological assessment of its oxidation products2003527122512322-s2.0-003846633810.1016/S0045-6535(03)00331-XChungK. T.StevensS. E. J.Degradation azo dyes by environmental microorganisms and helminths1993121121212132GottliebA.ShawC.SmithA.WheatleyA.ForsytheS.The toxicity of textile reactive azo dyes after hydrolysis and decolourisation2003101149562-s2.0-003746823910.1016/S0168-1656(02)00302-4Razo-FloresE.LuijtenM.DonlonB.LettingaG.FieldJ.Biodegradation of selected azo dyes under methanogenic conditions1997366-765722-s2.0-003071339410.1016/S0273-1223(97)00508-8GaneshR.BoardmanG. D.MichelsenD.Fate of azo dyes in sludges1994286136713762-s2.0-002845054010.1016/0043-1354(94)90303-4HuangJ.DingK.HouY.WangX.FuX.Synthesis and photocatalytic activity of Zn2GeO4 nanorods for the degradation of organic pollutants in water2008112101110192-s2.0-60549104395TurchiC. S.OllisD. F.Photocatalytic degradation of organic water contaminants: mechanisms involving hydroxyl radical attack199012211781922-s2.0-6244304675GuoQ.FordG. M.HillhouseH. W.AgrawalR.Sulfide nanocrystal inks for dense CuIn1-xGaxS1-ySey2 absorber films and their photovoltaic performance200998306030652-s2.0-6894911421410.1021/nl901538wZhangX.DuY.ZhouZ.GuoL.A simplified method for synthesis of band-structure-controlled CulnxZn21-xS2 solid solution photocatalysts with high activity of photocatalytic H2 evolution under visible-light irradiation2010358331333212-s2.0-7795029768510.1016/j.ijhydene.2010.01.111TsujiI.ShimodairaY.KatoH.KobayashiH.KudoA.Novel stannite-type complex sulfide photocatalysts A2I-Zn-AIV-S4 (AI = Cu and Ag; AIV = Sn and Ge) for hydrogen evolution under visible-light irradiation2010224140214092-s2.0-7704909542410.1021/cm9022024LiY.ChenG.ZhouC.SunJ.A simple template-free synthesis of nanoporous ZnS-In2S3-Ag2S solid solutions for highly efficient photocatalytic H2 evolution under visible light20091520202022FanL.GuoR.Fabrication of novel CdIn2S4 hollow spheres via a facile hydrothermal process20081122910700107062-s2.0-4914908707210.1021/jp8022259KaleB. B.BaegJ.-O.LeeS. M.ChangH.MoonS.-J.LeeC. W.CdIn2S4 nanotubes and “marigold” nanostructures: a visible-light photocatalyst20061610134913542-s2.0-3374589589710.1002/adfm.200500525WangW. J.NgT. W.HoW. K.HuangJ. H.LiangS. J.AnT. C.LiG. Y.YuJ. C.WongP. K.CdIn2S4 microsphere as an efficient visible-light-driven photocatalyst for bacterial inactivation: synthesis, characterizations and photocatalytic inactivation mechanisms2013129482490BhirudA.ChaudhariN.NikamL.SonawaneR.PatilK.BaegJ.-O.KaleB.Surfactant tunable hierarchical nanostructures of CdIn2S4 and their photohydrogen production under solar light2011361811628116392-s2.0-8005216118210.1016/j.ijhydene.2011.06.061JiangW. L.YinX. H.XinF.BiY. D.LiuY.LiX.Preparation of CdIn2S4 microspheres and application for photocatalytic reduction of carbon dioxide2014288138142ApteS. K.GarajeS. N.BoladeR. D.AmbekarJ. D.KulkarniM. V.NaikS. D.GosaviS. W.BaegJ. O.KaleB. B.Hierarchical nanostructures of CdIn2S4via hydrothermal and microwave methods: efficient solar-light-driven photocatalysts20102029609561022-s2.0-7795464208810.1039/c0jm00538jThorntonJ. M.RafteryD.Hydrogen evolution by templated cadmium indate nanoparticles under natural sunlight illumination2013381977417749AiZ.ZhangL.LeeS.Efficient visible light photocatalytic oxidation of NO on aerosol flow-synthesized nanocrystalline InVO4 hollow microspheres20101144318594186002-s2.0-7865041155610.1021/jp106906sHuangY.AiZ. H.HoW. K.ChenM. J.LeeS. C.Ultrasonic spray pyrolysis synthesis of porous Bi2WO6 microspheres and their visible-light-iduced photocatalytic removal of NO20101141463426349SkrabalakS. E.SuslickK. S.Porous MoS2 synthesized by ultrasonic spray pyrolysis200512728999099912-s2.0-2224443426410.1021/ja051654gHuangJ. H.CheukW.WuY. F.LeeF. S. C.HoW. K.Template-free synthesis of ternary sulfides submicrospheres as visible light photocatalysts by ultrasonic spray pyrolysis2012218251827ZhangJ.ElsanousiA.LinJ.HuangY.ElssfahE. M.ChenD.GaoJ.HuangZ.DingX.TangC.Aerosol-assisted self-assembly of aluminum borate (Al18B4O33) nanowires into three dimensional hollow spherical architectures2007712276427672-s2.0-3754905174910.1021/cg070492s