An Improved Effective Cost Review Process for Value Engineering

Second-look value engineering (VE) is an approach that aims to lower the costs of products for which target costs are not being met during the production stage. Participants in second-look VE typically come up with a variety of ideas for cost cutting, but the outcomes often depend on their levels of experience, and not many good alternatives are available during the production stage. Nonetheless, good ideas have been consistently generated by VE experts. This paper investigates past second-look VE cases and the thinking processes of VE experts and proposes a cost review process as a systematic means of investigating cost-cutting ideas. This cost review process includes the use of an idea checklist and a specification review process. In addition to presenting the process, this paper reports on its feasibility, based on its introduction into a VE training course as part of a pilot study. The results indicate that the cost review process is effective in generating ideas for later analysis.


Introduction
Value engineering (VE) is a value-enhancing technique developed by Miles, of which cost cutting is a part [1]. It is a proven method for improving product and process performance by changing materials, designs, and systems and aims to maximize function while minimizing cost [2]. VE has been embraced by a global spectrum of businesses and industries, particularly in areas such as defense, transportation, construction, and healthcare [3].
VE has evolved to comprise three phases, which are sometimes collectively referred to as product development VE: (1) zero-look VE, (2) first-look VE, and (3) second-look VE [4]. Zero-look VE is the application of VE principles at the concept proposal stage. One of its objectives is to introduce new forms of functionality that did not previously exist. Once an overall concept has been established during zero-look VE, first-look VE focuses on the major elements of product design. The objective of second-look VE is to lower the costs of products at the production stage when target costs are not currently being met. During this stage, when products are already in production, not many good alternatives are available, and so companies are compelled to use second-look VE to lower costs.
Brainstorming is a commonly used method of generating ideas and has been adopted in VE in order to develop a wide variety of ideas in a constraint-free atmosphere. However, the ideas resulting from brainstorming in VE tend to be biased and limited, because participants rely on their experience in their areas of engineering focus [5]. In other words, experienced individuals often fail to explore other feasible, possibly better ideas in different engineering areas [6]. At the same time, it is difficult for entry-level participants to come up with many ideas without training, since they may have difficulty imagining and investigating ideas within their areas of expertise.
Asking questions that stimulate curiosity and creativity is a helpful approach to idea generation and makes it possible to be creative in a thorough and even orderly way. A written list of mentally stimulating questions can remind individuals of approaches and possibilities that they may otherwise not have had in mind [7]. A notable example of this can be seen in engineers' use of the "eliminate, combine, rearrange, and simplify" (ECRS) method to discover potential changes 2 The Scientific World Journal that they can make to an existing product, so as to create a better one. These proposed changes may either be in the form of direct suggestions or starting points for lateral thinking. However, ECRS is so general that the process often ends up leading to interesting but impractical and uneconomical ideas. In contrast, second-look VE professionals tend to come up with small and simple yet practical cost-cutting ideas that lower the costs of products during the production stage. ECRS alone is thus not particularly well suited to coming up with second-look ideas.
In general, it is well known that the best cost-cutting ideas for second-look VE are associated with eliminating unnecessary or unused portions of functions or overspecifications [8]. VE professionals have typically been trained and disciplined over several years, with the goal of boosting their ability to generate such ideas. They learn how to come up with more ideas, how to analyze methods for developing ideas, and how to recognize good ideas, tips, and techniques. The thinking processes performed by professionals during second-look VE involve recognizing specification differences [9]. This enables VE professionals to think of new directions and generate costcutting ideas that can be accepted for further analysis. If such thinking processes can be formulated, it can be very useful for engineers who have difficulty generating cost-cutting ideas.
This paper presents a cost review process that was developed as a supportive method for investigating cost-cutting ideas in second-look VE. For it, we investigated secondlook VE cases for 20 home appliances, and created an idea checklist that was specific to those product models. In addition, we developed a specification review process to explore cost-cutting ideas by checking whether specifications are appropriate or can be improved. The rest of this paper is organized as follows. In Section 2, idea generation methods that are frequently used in VE are reviewed, with regard to their problems. Section 3 explains how the idea checklist and specification review process for this study was developed and applied. Section 4 presents the application of the proposed idea generation method to cases, while Section 5 evaluates the effectiveness of the method in a VE training course. The benefits and limitations of the proposed method are discussed in Section 6. Finally, Section 7 concludes with a summary and description of potential future work based on this study.

Idea Generation Methods
Much existing research on idea generation methods has focused on the goal of increasing the number of ideas produced, because it has been established that a direct relationship exists between the number of initial ideas and the quality of a final idea [10]. The main focus of such studies has been on brainstorming techniques for group-thinking sessions that increase the quality and quantity of proposed ideas for addressing a specific problem [11]. It has been claimed that group brainstorming is more effective than individual brainstorming, because mixing more different personalities into the creative flow results in a broader outlook in ideas, and the use of a facilitator to lead the session makes the process run more smoothly and removes potential bias [12]. As such, group brainstorming is the most common creativity technique used in the alternative phase of VE. Several books on VE, such as those of Fowler [13] and Dell'Isola [14], have presented brainstorming as the ideal creative technique for use in VE.
However, some VE researchers and professionals have questioned the usefulness of group brainstorming, claiming that it blocks the creative thinking efforts of a group [15]. VE participants are likely to experience the greatest difficulty during the process of idea generation. One problem is that participants tend to get stuck inside their own heads, in terms of their thinking and ideas, and do not exchange enough ideas through idea generation methods, due to perceptual blocks, emotional blocks, habitual blocks, professional blocks, or cultural blocks, which can hinder creative ability [16][17][18].
Individuals engaging in creative thinking should ideally engage naturally in a creative process that is as free of structure, rules, and processes as possible, but it is unlikely that a group will spontaneously do so in reality [19][20][21]. This is why applying a proven, systematic structure to brainstorming sessions significantly increases team productivity [22][23][24]. Al-Ghamdi [25] has investigated the necessary steps for effective implementation of brainstorming, and proposed a five-step procedure that helps to enhance the effectiveness of brainstorming implementation in VE studies. This study suggests that creative professionals prefer to use set methods to produce more creative results.
Asking questions to stimulate curiosity and creativity has proven to be a helpful method for idea generation, which shows that it is sometimes possible to be creative in a thorough and even orderly way. A written list of mentally stimulating questions can remind individuals of approaches and possibilities that they otherwise would not have considered. In such contexts, a checklist can play a key role in generating ideas [26]. Checklists can include ideas collected through previous experiences, so as to trigger team members' thinking about solutions to a problem under study. SCAMPER (substitute, combine, adapt, modify, put to other uses, eliminate, and rearrange) is an acronym for useful approaches that can be applied as stimuli to make one think differently about a problem area [27]. The SCAMPER method can be used to ask questions about existing products, using each of the approaches involved. Such questions are effective in helping individuals come up with creative ideas for developing new products or improving current ones.
Checklists may range from general to very specialized. General checklists are useful for almost any VE study. They contain suggestions for rearranging, substituting, and combining existing ideas in order to develop new ones. However, specialized checklists are only useful for addressing specific problems. For example, a series of questions can be created that stimulates new ways of thinking about new processes or devices [28]. In such cases, however, ordinary engineers might limit themselves to considering the listed questions, without giving much thought to other possible alternatives.
Brainstorming is often more effective if it is combined with other idea-generation techniques. These include the Delphi method, the Gordon technique, the morphological analysis technique, and TRIZ contradiction analysis. Of these, TRIZ provides the most structured and systematic The Scientific World Journal 3 approach and can be best used to augment or replace traditional brainstorming as it is currently applied in VE [29]. This makes the integration of VE and TRIZ beneficial, as it facilitates the transition from functional diagramming to implementable solution concepts [30,31]. The value in using these methods is in how they include additional thoughts that inspire participants and allow their minds to wander or make intuitive leaps. However, these methods cannot ensure that the ideas that are sought out will be found.

Developing a Specification Review Method
This study presents the development of a cost review process that helps to investigate cost-cutting ideas for second-look VE. Its main focus is the development of an idea checklist and specification review process. The checklist is created by investigating previous second-look VE cases and classifying them according to idea stimuli, while the specification review process is developed based on the thinking processes engaged in by VE professionals.

Developing the Idea Checklist.
For this study, we investigated the second-look VE cases of 20 home appliances, including TVs, refrigerators, washing machines, air conditioners, and peripheral computer devices. We organized 691 actual cases into eight idea categories: (1) material (213 cases), (2) form/structure (189 cases), (3) dimension (166 cases), (4) component (73 cases), (5) printing/coloring (45 cases), and (6) processing (27 cases). We created a checklist based on this classification by grouping similar cases and giving them appropriate names. As can be seen in Figure 1, the categories of material, form/structure, dimension, and component account for roughly 90% of the cases, while the other categories account for only roughly 10% of cases. Therefore, efforts to generate ideas through second-look VE should concentrate on these four categories, which describe the most frequently encountered instances.

Material
(i) Cost-Cutting Ideas. These are the most frequently encountered ideas among VE cases. Their main concept is to meet prevailing functional requirements with less expensive alternative materials. Table 1 presents material-related idea stimulus questions, which involve replacing the currently used material with one that is less costly. Since these ideas comprise the largest portion of cost-cutting ideas, they should be considered a priority in the exploration of cost-cutting ideas. To use a lower-grade material for its own sake is a bad idea. Therefore, engineers need to have considerable knowledge about material properties. There are two types of materialrelated ideas. The same material of a lower grade replacement is one that (a) uses the same material, (b) is of a lower grade, and (c) meets functional specifications. A different material at a lower cost replacement is one that (a) uses a different material, (b) costs less, and (c) meets functional specifications. (to object) concerns a potential anticipated object for a costcutting idea. A representative case of the same material of lower-grade replacement is the replacement of SUS 303 of a shaft with HIPS HB. This case can be represented as ⟨Material, Same material of a lower grade replacement, Shaft SUS 303 (to SUS204CU)⟩. A representative case of a different material at a lower cost replacement is the replacement of ABS plastic of a cover with HIPS. This case can be represented as ⟨Material, Different material at a lower cost replacement, Cover ABS plastic (to HIPS)⟩. If there is no potential object to be anticipated, this case can be represented as ⟨Material, Different material at a lower grade replacement, Cover ABS plastic ( )⟩. More examples can be found in Table 1.

Form/Structure
(i) Cost-Cutting Ideas. The form/structure category accounts for the second-largest share of second-look VE cases. The main idea of form and structure cost-cutting ideas is to eliminate, combine, rearrange, and simplify some aspect of the form or structure of an existing product while meeting functional requirements. Table 2 shows idea stimulus questions and cases that can be classified as form/structure costcutting ideas. These ideas are meant to reduce material or processing costs by altering a component's form or structure.
(ii) Expression. A representative case of simplification is that of simplifying the comb pattern ribs of a friction holder rear by replacing it with simple pattern ribs. This case can be represented as ⟨Form/Structure, Simplification, Fiction holder rear comb pattern ribs (to simple pattern ribs)⟩. If there is no potential object to be anticipated, this case can be represented as ⟨Form/Structure, Simplification, Friction 4 The Scientific World Journal  Table 2, and some cases are illustrated with pictures as shown in Table 3.

Dimension
(i) Cost-Cutting Ideas. These ideas are meant to reduce the size or weight of an existing product in order to cut material costs. Dimension-related features include thickness, length, width, height, and diameter. Reducing the thickness of a component is one of the most frequently used ideas for cutting costs related to dimension. These idea stimulus questions are shown in Table 4.  Table 4.
The Scientific World Journal 5  Table 5.

Printing/Coloring
(i) Cost-Cutting Ideas. The ideas in this category involve the application of low-cost printing and coloring methods. The basic questions in this category concern the possibility of applying low-cost printing methods or omitting coloring processes by using natural or the same (existing) color. Table 5 shows idea stimulus questions related to labeling and painting.
(ii) Expression. A representative case of lower-cost printing replacement involves replacing the labeling of an internal 6 The Scientific World Journal  Table 6.

Processing
(i) Cost-Cutting Ideas. These ideas are meant to reduce processing time by changing a joint type, eliminating an assembly step, or reducing a processing step. Table 7 shows idea stimulus questions related to processing.
(ii) Expression. A representative case of lower-cost processing is the replacement of the screws of a main PCB and a boy frame with tapes. This case can be represented as ⟨Processing, Joint type replacement, Main PCB and body frame joint screws (to tapes)⟩. More examples can be found in Table 7. Table 8 summarizes an idea checklist that was created by classifying second-look VE cases according to idea stimuli. Engineers can work through the checklist in brainstorming sessions in which they examine a product for which target costs are not currently being met. They can answer the questions in the checklist one by one while examining the product. This idea checklist can thus be a supportive tool for reminding inexperienced engineers of various idea perspectives to consider. However, the list may not by itself be able to help engineers think of more practical ideas. A systematic process is needed to make ideas more practical.

Developing the Specification Review Process.
For this study, we interviewed VE professionals who had 15-20 years of experience about how to find direction in costcutting ideas during second-look VE. We found that design specifications are used to generate, test, and evaluate design ideas, because they are essential qualitative and quantitative characteristics for setting criteria to be satisfied in designing a component, product, or system (such as performance requirements, dimensions, weight, or reliability). The review processes performed by professionals involve investigating current specifications based on the assumption that design specifications may have been decided without adequate review. This kind of thinking process can be very useful for engineers who have difficulty generating cost-cutting ideas. Table 9 presents the kind of specification review process that is typically carried out by VE professionals. In the first step, the specifications of components are identified and recorded with drawings or approved calculation sheets. If there are no existing specifications, the specifications need to be established through the proper methods. In the second step, all relevant regulations are explored, such as laws, legal standards, environmental regulations, safety standards, or service guidelines. By looking into issues of who created the specifications, how, and why, more information can be obtained. If reasons and methods for creating specifications can be determined, they can help professionals understand historical approaches. If they cannot be determined, it can be concluded that specifications have been created without an adequate review process. In the third step, cost-cutting ideas are generated based on determining an idea form: ⟨Category, Subcategory, object (to object)⟩. This aims to find any potential problems that could arise from object to object and to determine how to overcome them. Sometimes, these ideas can be obtained simply by benchmarking. Going through steps 1, 2, and 3 makes it possible for ideas to be explored and expanded on. This review process, together with the idea checklist, allows brainstorming to be conducted more effectively.
In summary, the cost review process consists of two steps: identifying the relevant subcategories within the idea checklist through a brainstorming session and then conducting a specification review for the subcategories identified as relevant. During the brainstorming session, VE participants investigate a product for which cost targets are not currently being met by going through the idea checklist and identifying potential subcategories for cost cutting. In the subsequent specification review process, they identify the current specifications, explore requirements and the issues of "who, why, and how, " and think of cost-cutting ideas for the subcategories.

Implementation
In the next step in this study, the idea checklist and design specification review described in Section 3 were implemented in a training course for the associate value specialist (AVS) program in a company. The AVS program is a certificate program for engineers who decide to become professional value engineers [32]. The program is based on a process known as a multistage job plan, which provides structure for value studies. The plan consists of six sequential steps: (1) the information phase, (2) the function analysis phase, (3) the alternative phase, (4) the evaluation phase, (5) the development phase, and (6) the presentation and implementation phase. The goal of the plan is to generate as many practical ideas as possible for later analysis. This shows that idea generation can be seen as the most important part of 8 The Scientific World Journal   VE. This paper only describes the phase associated with the proposed method in the training course. Table 10 shows the appearance and component configuration of a handset used in this training. A hierarchical decomposition of the product or what is typically known as the bill of materials (BOM) is also shown in Table 10. Two cases were selected to demonstrate how the supportive method is implemented.

Implementation Case I.
The proposed method was applied to handset cases A and B in Table 10, in order to demonstrate how it works. The function of the handset cases was to protect the internal parts of the handset, and their target costs were not being met. Few good alternatives were available, and so an idea checklist was employed to generate cost-cutting ideas. By checking the idea stimuli one at a time in a brainstorming session, four subcategories were developed by the engineers in the training program, as shown in Table 11. In the second round, a specification review was conducted to explore the four subcategories based on specification data. The current design specification of the handset cases with respect to material is standard ABS (acrylonitrile butadiene styrene) V0. With regard to thermal characteristics, the regulations imposed on handset uppers are the UL (Underwriters' Laboratories) and TUV (Technischer Uberwachungs Verein) standards. The history of the design was explored, and it was found that the existing design specification involved using heat-resistant resin, as imposed by UL/TUV standards, primarily to impede fires in the phone line. The specification review resulted in examining the following idea form: ⟨Material, Same material of a lower grader replacement, Handset cases ABS (to ABS HB)⟩ by questioning what problems you expect and how you overcome them, because ABS HB (hard board) has the same functional specifications as ABS V0, and is also heat-resistant.
The next subcategory concerned the thickness of the handset cases. The written specifications for the cases describe a thickness of 2.5 mm, as in the schematic drawing. However, the measured thickness of the handset was 2.8 mm, which was over specifications. The safety regulations imposed on handset cases dictate that they must not break under 5Ns impact. Furthermore, a review of the history of the handset design revealed that the existing design specifications had been set up without adequate specification review. The specification review resulted in examining the following idea form: ⟨Dimension, Thickness reduction, Headset case 0.28 t (to 0.25 t)⟩. It should have investigated the thickness needed to withstand the impact of 5 Ns. The application of an appropriate specification review process to the handset cases is summarized in Table 12. Table 13 shows an example of idea generation for the PBA SUB-etc. MIC (F) and CFH (0) in Table 10, for a function in which an electrical signal is passed to the modular jack. Four subcategories were chosen from the idea checklist for further investigation.

Implementation Case II.
A specification review was conducted to further explore the four subcategories in a systematic manner, based on specification data. The form/structure subcategory concerned the integration of the PBA SUB-etc. and CFH. In the existing structure, the CFH and the PCB-handset MIC were detachable at the modular jack, with the modular jack soldered onto the PCB-handset MIC in PBA SUB-etc. The safety regulations imposed on the CFH were unknown. The actual structure ⟨Processing, processing step reduction, Roller Shaft shaping secondary operation (to primary operation)⟩ Table 9: Specification review process.
Step 1: identifying Step 2: exploring of the CFH and the PCB-handset MIC can be split. An examination of the history of the design revealed that the existing structure was set up by an engineer due to problems related to repairs after sales. Therefore, the relevant after-sales claim rates need to be investigated to decide whether the CFH and the PCB-handset MIC should be separated. The idea generated from this specification review was to examine the feasibility of soldering the CFH directly to the PCB-handset MIC without the modular jack, if rates of after-sales repairs were low or nonexistent. The second subcategory is related to the length of the CFH. The existing length of the CFH was 300 ± 20 cm. The actual measured length was 305 cm. The safety regulations imposed on the CFH were unknown. A review of the history of the design showed that the existing specifications had been set without adequate specification review. The actual length is within the given range, meaning that the current length has been set appropriately with respect to the current specifications. The idea generated from this specification review was to examine the length of other commercial models in order to benchmark them for comparison with the current design specification. The application of the specification review process to the PBA SUB-etc. and CFH is summarized in Table 14.

Evaluation
A preliminary evaluation of the proposed method for brainstorming was conducted by implementing the method in a training course, in order to determine whether it could be used as a supplementary method to help engineers generate ideas. We assembled ten brainstorming groups. Each group was made up of 4-5 persons. We introduced the purpose of the test and provided the method, along with the product. The experiment was conducted just after brainstorming, without applying the method. The results of the preliminary test are shown in Table 15.
The total numbers of ideas generated by brainstorming without and with the supportive method were 75 and 219, respectively. Through the use of the supportive method, the average number of ideas improved from 7.5 to 21.9, which is an increase of 293%. These results of the preliminary test result suggested that the use of the supportive method for brainstorming resulted in training outcomes that were significantly better than those achieved through brainstorming alone.
A most significant observation was made during the test. When running through the checklist, the leader of one group asked, "Taking this idea checklist into account, how might I check this specification? What effect will this idea have on the problem?" as well as other similar questions. The other members of the group answered the questions. We observed that the checklist stimulated the participants, who had trouble remaining alert during the brainstorming session in which the supportive method was not used.

Discussion
Our evaluation of the training effectiveness of the method showed that participants felt that it made positive contributions to their brainstorming behaviors. This suggests that the method reinforces brainstorming by providing a more efficient approach to generating ideas. However, our interviews with several VE experts revealed a somewhat different reality.
For our study, we also examined people's attitudes toward this method. In a postexperimental survey, eight of 10 groups said that the method was either helpful (six groups) or sometimes helpful (two groups). Some participants informally praised the method, and one volunteered that the method was helpful for him because the idea checklist and review process smoothly guided idea generation. Another got quite excited about the effectiveness of the method and stated that he planned to introduce it to his team members, who work on home appliance development. However, some participants criticized the method, arguing that the idea stimuli such as dimension, amount, and size are well-known approaches in VE, and thus the method is only effective for entry-level engineers. For senior engineers who have experience in their fields, the method may even limit idea generation. Hence it is necessary that engineers expand on checklists with as many feasible alternatives as possible.
In general, a specification review is an important part of second-look VE. It provides essential technical details on the materials or processes to be used in developing a product that conforms to customer requirements. Product The Scientific World Journal 13    nonconformance is often associated with inadequate specification review. Engineers often set design specifications without adequate specification review due to a lack of time and information. Problems of this type can be avoided with a well-planned and managed specification review procedure. Therefore, specification reviews are a necessary process for further exploring ideas that need to be visualized by engineers.