Due to ethical and medical-legal drawbacks, high costs, and difficulties of accessibility that are inherent to the practice of basic surgical skills on living patients, fresh human cadaver, and live animals, the search for alternative forms of training is needed. In this study, the teaching and learning process of basic surgical skills pertinent to plastic surgery during medical education on different inanimate bench models as a form of alternative and complementary training to the teaching programs already established is proposed.
1. Introduction
Recently there has been tremendous growth of ambulatory surgical procedures that general practitioners need to perform in order to treat cutaneous lesions [1–3]. In this context, as a large percentage of medical students do not acquire basic surgical skills during their training [4] and most of the general practitioners that perform ambulatory surgeries received no formal surgical training [5], it is necessary to establish a training program to teach and refine the basic surgical skills related to plastic surgery (e.g., to biopsy a cutaneous lesion and to reconstruct the defect by the rotation of a surgical flap) that are essential to perform these ambulatory surgical procedures during medical education [4–6].
Considering that surgical training on living patients (traditional learning) violates ethical and medical-legal aspects, that training on live animals and fresh human cadaver increases the risk of infections, involves high costs and limited access, requires specialized installations, and also contravenes ethical legal aspects, and that using virtual reality simulators involves high costs and restricted access [7, 8], the simulation-based basic surgical teaching on inanimate bench models is becoming widely used [9]. However, to date, it has not been established a teaching program that allows surgical skills to be completely acquired [4, 5], and new opportunities in simulation-based surgical education need to be explored to positively impact quality and safety in surgical care [10].
Among all the surgical specialties, plastic surgery now occupies a negligible component of many undergraduate curricula, and there is much discussion in the worldwide literature regarding if there is a place for plastic surgery in the undergraduate curriculum [11–14]. Moreover, plastic surgery as a specialty is poorly understood by medical students and healthcare professionals [11, 15–18], and one of the important reasons for this is limited and inadequate plastic surgery exposure at undergraduate level [15–17]. Although undergraduate exposure is an important influential factor for subsequent career interest in plastic surgery [16, 19], many medical students are in favor of having plastic surgery teaching even though many may not necessarily want to pursue a career in the specialty [20]. So, as teaching undergraduate plastic surgery has potential benefits to all future physicians and ultimately patients, irrespective of career intentions [17], some authors [13, 14, 21, 22] have reported the need for plastic surgery education at undergraduate level.
Given the difficulties of changing the undergraduate curriculum [13, 23], simple solutions to increase plastic surgery exposure are required [13, 17]. Therefore, the aims of this study were to propose and to describe the teaching and learning process of basic surgical skills pertinent to plastic surgery during medical education using different inanimate bench models as a form of alternative and complementary training to the programs already established.
2. Simulation-Based Basic Plastic Surgical Skills Training
The proposal is based on self-directed training and feedback from instructors, distributed in several sessions (days, weeks, or months) of teaching and learning, interspersed with periods of rest [24, 25]. Each session consists of steps to be undertaken in subsequent ways: verbal teaching supervised by instructor and based on textbooks, online text, and online narrated expert demonstration videos; self-directed training on bench models with immediate feedback from the instructor in the classroom (or laboratory of simulation); self-directed training on bench models with posterior feedback from the instructor focused on extra-class procedures (the undergraduate must bring the bench model with the procedures carried out so that specific technical factors are assessed and constructive feedback is provided) [24–29].
3. Learning Goals
Once the basic skills training can lead to improved performance of more complex tasks [24], it is important to include teaching goals that are set before the beginning of the teaching and learning process in order of increasing difficulty, and these should be distributed in different training sessions [30]. Thus, as the student acquires simpler skills, more complex skills should be incorporated into the training. Initially, the goals may be similar for all group members. However, in subsequent sessions, proposals should vary according to individual needs. During the training steps, the instructor should explain the advantages and disadvantages of each technique, the proper choice of surgical materials, and proper use of surgical instruments.
In this training program, the basic plastic surgical skills are included (Figure 1) according to the analysis of the program for simulated training of surgical skills of the American College of Surgeons Program for Accreditation of Education Institutes performed by Rosen et al. [31].
Learning goals. Undergraduates should initially perform basic surgical knowledge and then be trained on the most complex surgical skills.
4. Inanimate Bench Models
In recent years, different inanimate bench models have been proposed, discussed, and evaluated by our group [32–39] and by others [40–49]. In this training program, we adopted six inanimate bench models as teaching platforms (Table 1) because these enable the understanding of tridimensional procedures and also allow undergraduates to learn to respect the different layers of the skin (epidermis, dermis, subcutaneous cellular tissue, and muscles) during practice [32–49]. Such materials can be easily purchased from commercial outlets, such as craft shops and supermarkets. The parts of postmortem animals and organic materials must be gotten fresh and stored in refrigeration to reduce the risks of infections and increase the feasibility time of models.
Advantages and disadvantages of inanimate bench models [8, 9, 31–49] adopted as learning tools in this basic plastic surgery training program.
Inanimate bench models
Fidelity
Infection risk
Financial costs*
Availability*
Easy handling
Reutilization**
Parts of postmortem animals
Ox tongue
High
Present
+++
Variable
++
Possible
Cattle skin
High
Present
+++
Variable
++
Possible
Pig skin
High
Present
+++
Variable
++
Possible
Chicken skin
High
Present
+++
Variable
++
Possible
Organic material
Fruits and vegetables
Low
Present
++
Variable
+++
Possible
Synthetic material
Ethylene-vinyl acetate
Low
Absent
+
Variable
+++
Unlimited
*Varies according to seasonality and geographical region; **limited by risk of infections and natural deterioration of material.
5. Surgical Knots
The surgical knots (interlace made between the ends of a tread in order to unite and fix them) should be part of the simulated surgical teaching because they are essential for hemostasis and synthesis (key surgical times). The knots can be performed with the aid of instruments or manually (one or two hands), such as the nodes of the index finger (second finger), the middle finger (third finger), of surgeon, and of shoemaker. The manual knots must follow these principles: (a) equal movements of opposed hands perform a perfect knot; (b) the tip of the tread that changes its side after the first semi-knot should return to the initial side to perform another semi-knot; (c) the knots should be firm but without tension on the tissue (in vivo, excessive strain can result, for example, in avulsion of a blood vessel) [50, 51]. The different types of surgical knots should be practiced repeatedly until they can be performed quickly, effectively and almost automatically [52].
6. Incision and Suture Techniques
The training of incisions (linear, circular, elliptical, vertical, and horizontal) and different sutures, such as simple interrupted sutures, vertical mattress suture according to Donati and McMillen, modified vertical mattress suture according to Allgöwer, horizontal mattress sutures, half-buried mattress sutures, subdermal interrupted sutures, running simple suture, running locked suture, and running subcuticular suture, can occur simultaneously (Figure 2). First, the undergraduate should mark the chosen material. The model is incised with the scalpel, which facilitates teaching the proper way to grip the instrument, its position with the “skin” (cutting angle between 30° and 60°), the way of the cut (firm and without “sawing” movements), and the depth of the incision [53, 54]. Following this, the created defects are repaired by placing points, also applying the technical aspects that are important to promote good healing, such as meticulous handling of tissues, proper positioning of the needle in the needle holder, angle of needle entry in the “skin,” exit of the needle in an equidistant point in relation to its entry, and approximation and eversion of the “wound edges” with proper tension [5, 55].
Inanimate bench models simulating incision and suture techniques. (a, b) Cattle-skin bench model simulating circular, linear and elliptic patterns of incision. (c) Pig-skin bench model simulating vertical mattress suture. (d) Synthetic ethylene-vinyl acetate bench model simulating subdermal interrupted suture; training should preferably be carried out near the edges of the material, and it is advisable to use multiple overlapping synthetic material plates aiming to mimic the different layers of the skin. Note that all the three bench models are simulating the procedures in a three-dimensional way.
7. Biopsy Techniques
The training of biopsy techniques (elliptical and circular; excisional and incisional; with and without safety margins) should be performed according to the previously set requirements. For example, for the practice of the classical elliptical incision (Figure 3), students should receive the following instructions [28, 53, 56–58].
Inanimate bench models simulating elliptical biopsy technique. (a, b, and c) Synthetic ethylene-vinyl acetate bench model and (d, e, and f) chicken-skin bench model simulating (a, d) the safety margins forming an ellipse, (b, e) the intact removal of the “surgical piece", and repair of the surgical defects with the confection of (c) intradermal suture and (f) running simple suture. Note that both bench models allow three-dimensional understanding of the whole process of training.
Drawing of the Ellipse
The ellipse must be formed by two arcs that should be symmetrical in relation to the midline that separates them, and they should meet at the ends forming a convexity; the used curvature should be based on a length-width ratio of 3 : 1 to 4 : 1; a 30° angle should be used at the ends of the ellipse (intersection of the arcs).
Safety Margins
A line should be marked around the periphery of the “skin lesion” to delimit the safety margins; according to current recommendations for surgical resection of most cases of nonmelanoma skin cancer, the safety margins should be of 2 to 10 mm.
Incision and Excision
Smooth movements with the scalpel (cut angle between 30° and 60°), cuts of “subcutaneous tissue” with 1 or 2 movements, handling the tissue gently to avoid damaging the ellipse edges and the “epidermis,” and resection of the same amount of “tissue” in all areas of the “wound” should be done.
8. Skin Grafts
Faced with a “skin” defect, students should plan a stamp graft in mesh or in strips with different diameters and thicknesses [59]. The graft should be removed intact from the donor area with a scalpel blade, Blair knife, or dermatome [46, 49, 59–63]; undergraduates should be trained on different pressures on the tissues and angulations between the blade and the “skin” in order to fabricate grafts of varying sizes and thicknesses [60–62]. After obtaining the graft, it should be placed and shaped in the receiving area so that the edges are well coadapted in all sides of the recipient area. Subsequently, the proper fixation of the graft should be carried out in order to reduce the dead space [59]. The simulation of the compressive dressing for skin grafts should also be part of the training [49].
9. Surgical Flaps
The bench models also allow the simulated practice of surgical flaps, such as transposition flaps (Z-plasty, W-plasty, rhomboid, and bilobed), of rotation, of advancement (V-Y and R-plasty), and in island (Figure 5). Faced with a “skin” defect, the carrying out of a flap based on schemas is planned [64]. From this, the markings are incised, the flap is moved to fill the defect, and simple stitches should fix the flap carefully, avoiding strain on its pedicle [65].
10. Diagnosis and Treatment of Simulated Cutaneous Lesions
Assuming the fact that the training of a complete procedure can be broken down into several components [66], following the acquisition of techniques of surgical knots, incisions, sutures, biopsies, grafts and flaps, the undergraduates can be trained on the diagnosis and treatment of simulated skin lesions by joining the learned skills. At this time, different “skin lesions” should be simulated on bench models, so that students make their respective diagnoses and/or treatments by using the previously learned principles and, then, the proper surgical repair. At this stage of the training, instructors should provide students with the cognitive aspects of decision making, such as which surgical procedure should be adopted in every kind of “skin lesion.” Different skin lesions can be simulated on bench models.
Lipomas and Epidermoid Cysts
To simulate these lesions, styrofoam balls, mini-balloons filled with ink or projectiles of paintball. should be inserted through a subcutaneous tunnel on parts of postmortem animals bench models [67, 68]. Undergraduates must respect the simulated lesion completely, taking care not to leave parts of the lesion in the wound (Figure 4).
Chicken-skin bench model simulating a subcutaneous lipoma. (a) A small styrofoam ball should be placed in a subcutaneous tunnel made in the posterior portion of the model with the intention of (b) mimicking the cutaneous lesion. Following, students must (c) incise the skin, (d) carefully dissect the lesion, (e) resect it completely, and (f) repair the defect by means of single interrupted sutures.
Inanimate bench models simulating flaps. (a, b, and c) Ox tongue bench model simulating a monopedicle advancement flap. (d, e, and f) Chicken-skin bench model simulating a Z-plasty. Note that students can easily see the advancement and transposition of surgical flaps, which often is hard to understand with the use of two-dimensional models. For example, it is simpler to explain that the center line of the Z-plasty should be placed along the scar, since it is this component that will be lengthened.
Necrotic Wounds
For training of tangential excision and surgical debridement (or escharotomy), the surface of the chosen bench model should be burned to simulate a necrotic area [69]. Undergraduates must respect the necrotic “tissue,” taking care not to damage the healthy tissue (Figure 6).
Organic bench model simulating (a) a necrotic wound and its (b) careful surgical debridement.
Nonmelanoma Skin Cancer
The student should make an excisional biopsy with predetermined safety margins, since this is considered the standardized diagnostic therapeutic procedure for most cases of nonmelanoma skin cancer [58]. After the resection of different simulated skin lesions, undergraduates must make the appropriate repair of the created defect (primary approximation of the wound edges with stitch placing, graft or rotation, transposition or advancement of a flap) (Figure 7).
Cattle-skin bench model simulating (a) a nonmelanoma skin cancer with safety margins, (b) complete surgical excision of the “cutaneous tumor,” (c) repair of the defect by placing an ox tongue graft, and (d) a pressure dressing fixed with braided suture over the gauze wad.
11. Training Time
There are no clear recommendations on the total number of hours that medical students must practice to acquire basic surgical skills. In this sense, in this basic plastic surgery training program, the number of training hours was distributed according to the complexities of skills (i.e., a longer training for those skills considered more complex) (Table 2). In general, the first week serves to introduce the subject (e.g., teaching issues such as clinical applicability of skills) and the other for the simulated training itself (hands-on training). It is important to take a break of one week between each of the six skills, totaling therefore six months of basic plastic surgery training (24 weeks, being 19 of teaching and learning and five of rest). A specific week or the total of weeks of a skill can be adjusted (i.e., increased or decreased) according to the individual or subgroups needs.
Proposed training time in this basic plastic surgery training program.
Training time (h) per week
Learning goals
First day
Second to sixth day
Seventh day
Total number of weeks**
Verbal teaching based on theoretical materials
Training on BM in the classroom (process feedback)
Training on BM outside the classroom*
Training on BM after practice outside the classroom (outcome feedback)
Surgical knots
1
1
Variable
1
2
Incision and suture techniques
1
2
Variable
2
2
Biopsy techniques
1
3
Variable
3
3≈
Skin grafts
1
3
Variable
3
3¥
Surgical flaps
1
4
Variable
4
5o
Management of cutaneous lesions
2
4
Variable
4
4#
h: hour; BM: bench models; *each medical student must train repeatedly for as long as you feel necessary; instructor's role is to encourage this practice outside the classroom; **one week for introduction of the subject in each of the six skills; ≈one week for incisional biopsies (without safety margins) and one for excisional biopsies (safety margins); ¥one week for the handling of the surgical instruments for the preparation of graft (donor area) and one for graft placement on recipient area; oone week for each type of flap (transposition, rotation, advancement, and island flaps); #one week for each proposed cutaneous lesion (lipomas/epidermoid cysts, necrotic wounds, and non-melanoma skin cancer).
12. Self-Directed Training
During each training session, supervised by an instructor and at home, students should use the principles taught in an individualized, deliberate, repetitive, and participative way [30, 70]. Whenever there are doubts about a complete procedure or a particular step, they should seek for help from textbooks, online text, online narrated expert demonstration videos, and instructors [26–29].
13. Feedback
In the context of the acquisition of surgical skills based on simulation, feedback from instructors is associated with a better and faster learning and also with greater knowledge retention over time [30]. Thus, all undergraduates should receive feedback during and at the end of each training stage [30] in the classroom, or in specific times scheduled after the training at home [32–39]. Instructors must analyze specific movements, paying attention to inadequacies (e.g., mark lines and procedures already finished can serve as evaluation parameters), and following this, they should provide a constructive feedback (point and correct any technical errors) to students [71]. Thus, undergraduates improve skills based on their mistakes and can be trained again and again, having, as a result, the gain of skills over time. Concurrent with the feedback, it is important to encourage students to resolve their doubts during practice and after extracurricular tasks.
To facilitate feedback, students should be distributed around rectangular tables, providing mobility to the instructor to clarify any doubts individually and also in subgroups [32, 42, 45].
14. Instructors
Feedback can be given by physician instructors (faculty expert or residents) and/or by nondoctors since they are qualified, such as laboratory technicians or medical students (monitoring format) [10, 24, 72, 73], without compromising the learning [72, 73]. The adoption of one instructor for each group of four undergraduates is recommended [74].
15. Assessment and Certification
Under simulated surgical teaching, we must emphasize the importance of an objective evaluation during and at the end of the whole teaching and learning process of each proposed surgical skill in order to measure the level of acquisition of the taught skills [75].
Among the various forms of the described assessments [31, 75], the Objective Structured Assessment of Technical Skills (OSATS) [76, 77] is currently considered as the gold standard for the objective evaluation of acquisition of surgical skills [75]. OSATS consists of two subscales: Task-Specific Checklist and Global Rating Scale (GRS) [76, 77].
Since GRS [76, 77] (Table 3) has the advantage of being used to assess generic aspects of technical performance and has a broad applicability, without the need to develop specific lists for each procedure [78], this scale has been adopted as a measurement and certification tool by our group [32–39] and by others [53, 78]. With this scale, it is possible to evaluate the performances of students in eight main areas, through a 5-point scale, being 1 the minimum score and 5 the maximum one, so that the maximum score achieved is 40 [53, 76, 77]. Instructors can apply this scale at the end of each training session, and in subsequent sessions, they follow the gain of skills and specific points (among the eight evaluated ones) that deserve attention.
Global rating scale adapted to evaluate the sutures and biopsies techniques [53, 76, 77].
Please rate the trainee's performance on the following scale.
Respect for tissue
1
2
3
4
5
Frequently used unnecessary force on tissues or caused damage by inappropriate instrument use
Careful handling of tissue, but occasional inadvertent damage
Consistently handled tissues appropriately with minimal damage
Time in motion
1
2
3
4
5
Many unnecessary moves
Efficient time and motion, but some unnecessary moves
Clear economy of movement and maximum efficiency
Instrument handling
1
2
3
4
5
Repeatedly makes tentative or awkward moves with instruments
Competent use of instruments, but occasionally awkward
Fluid movements
Elliptical excision skill*
1
2
3
4
5
Lacks knowledge of design parameters (<2 mmor >10 mm margins); angles very different than 30°; length-width ratio very different than 3-4 : 1
Adequate 2 to 10 mm margins; angles at ends of ellipse slightly different than 30°; length-width ratio slightly different than 3-4 : 1
Adequate 2 to 10 mm margins; 30° angles at both ends; length-width ratio 3-4 : 1
Suture training**
1
2
3
4
5
Awkward and unsure with poor knot tying, and inability to maintain tension
Competent suturing with good knot placement and appropriate tension
Excellent suture control with correct suture placement and tension
Flow of operation
1
2
3
4
5
Frequently stopped operating, seemed unsure of next move
Demonstrated some forward planning and reasonable progression of procedure
Obviously planned operation
Knowledge of procedure
1
2
3
4
5
Inefficient knowledge of procedure. Looked unsure and hesitant
Knew all important steps of procedure
Demonstrated familiarity of all steps of procedure
Final product
1
2
3
4
5
Final product of unacceptable quality
Final product of average quality
Final product of superior quality
Overall performance
1
2
3
4
5
Very poor
Competent
Very good
Maximum total score (40)
Total score ( )
*This parameter should be excluded for the evaluation of suture techniques; **this parameter should be excluded for the evaluation of biopsy techniques.
In addition, GRS [76, 77] can also be used as a certification tool; for an individual task, the candidate should achieve a score of 24 or more to be considered competent [78]. Therefore, if the trainee meets the predefined criteria based on objective assessment, he/she can progress to the next stage of training (considered as a more complex one). However, if the undergraduate is not able to proceed, the training should be repeated and focused on specific deficits, and, then, a new objective assessment should be carried out.
In the training evaluation, a characteristic of bench models that could be considered as a problem (they can tear) is actually an advantage because this occurs when students make a wrong movement (e.g., applying excessive force). This characteristic can serve as an evaluation mechanism with feedback for improving skills [32–34]. Moreover, the markings made on the surfaces of models also serve as an evaluation parameter [33].
16. Discussion
Over the last two decades, simulation-based education has emerged as an important innovation in medical learning and practice [31, 79]. In this context, surgical training is shifting from the traditional apprenticeship to a more objective standardized approach, using simulators to improve several medical aspects such as reducing errors and increasing patient safety [31]. Since currently the simulated acquisition of basic surgical skills is recommended before any procedures on living patients [7], the main focus of this study was to propose a simulation-based basic plastic surgery training program during medical education, through the training on different inanimate bench models. In order to increase the arsenal of surgical skills of medical students during training, this teaching proposal and the way bench models are applied can be incorporated and adapted to complement the curriculum already established in different educational institutions [8, 30], and this,can be used in several disciplines such as surgical technique, plastic surgery, among others. Both novice medical students and students that master basic surgical skills partially, but that need to improve them, can benefit from this program. Similar to other studies [13], this training program also has the potential to introduce and improve students’ plastic surgery skills, as well as develop personalcareerinterests.
Based on the assumption recently described as the most effective method to teach surgical skills in simulation environments, a combination of self-directed training with instructors’ feedback, intermittently distributed over a predetermined period (weeks or months) [24, 25], this was the teaching form adopted in the present study in order to retain and improve the learned surgical skills [24, 25]. However, some factors, such as high costs [25] (mainly in developing countries) [32, 33, 43], the lack of time, and shortage of faculty experts (traditional instructor) [10, 24] have been described as limiting factors for the implementation of this simulated training strategy.
One solution to partially reduce the financial cost is the use of low cost bench models, such as those described in the present study. The different inanimate bench models vary in relation to the fidelity level (realism) when compared to a live human being; there are high fidelity models, such as parts of postmortem animals (pig [37, 38, 40, 45, 46], chicken [38, 39, 44], and cattle [48] skins and ox tongue [40–42]) and others of low fidelity, such as plates of ethylene-vinyl acetate [32, 34–38, 47], organic material [33, 49], among others [40, 53].
Despite the intuitive belief that “the more realistic, the best,” in the simulated training of surgical skills, the acquisition of skills should be measured by means of an objective method [75]. Therefore, since there are studies developed by our group [36–38] and by others [80–83] that demonstrate objectively that the surgical skills learned by novice undergraduate on bench models can result in improved performance in animals, corpses, and also in the operating room, regardless of the fidelity of bench model [9, 38, 39, 80–83], the choice of a specific bench model should not be based on its fidelity. Aspects such as availability, seasonal variability, and costs should be considered for this choice.
The authors believe that the bench models are complementary. In order to generate the interest of medical students in the practice of plastic surgery principles, the initial training in classrooms (or laboratories of surgical technique) should be preferably performed on bench models made from parts of postmortem animals, because it was shown that students feel more attracted by these bench models [40]. For the subsequent training sessions, low-fidelity bench models should be preferred because they are versatile, reusable, and easy to handle [32, 33, 35, 47, 49], unlike the ex vivo model that requires adequate space and conditions to be stored [7, 8], and it can make the training impracticable, for example, at home [35].
Although financial costs can be reduced by the previously described measures, time availability remains a problem for faculty experts [10, 24]. Feedback generated by computers could be an option to reduce the supervised learning time. However, besides the high cost for its acquisition, the retention of skills over time is significantly greater when learned from direct feedback from an instructor [84]. Similar to that described here, the incorporation of residents, trained medical students, or nonphysician skills laboratory [10, 72, 73] as instructors is an alternative that can reduce the number of faculty surgeons transferred from patient care to simulation environments. With this measure, faculty surgeon would focus on teaching complex tasks and cognitive aspects of clinical training (e.g., decision making) that are not duties of the nonmedical instructor [73]. Alternatives that can also help reduce the time of supervised simulated teaching would be increased intervals between training sessions [85], to use concepts derived from blended learning [86], and to encourage the practice outside the classroom, for instance, at home, as it has been proposed by our group [32–39].
The present training program was structured especially to develop some basic plastic surgical skills. Therefore, it does not meet all the needs of medical students in training, which should include the acquisition of other basic surgical skills, as it is described by the American College of Surgeons/Association of Program Directors in Surgery National Skills Curriculum [31].
17. Conclusion
The proposal of simulation in basic plastic surgery training on inanimate bench models is a further complementary alternative to the arsenal of training programs already established in order to better prepare medical students before their contact with living patients which remains as the cornerstone of medical education.
Conflict of Interests
The authors declare no conflict of interests.
Disclosure
The authors hereby certify that no financial support has been received from any commercial source by any coauthor, individual, or entity that is related directly or indirectly to the scientific work which is presented in this paper.
AskewD. A.WilkinsonD.SchluterP. J.EckertK.Skin cancer surgery in Australia 2001–2005: the changing role of the general practitioner200718742102142-s2.0-34848883715WilkinsonD.BourneP.DixonA.KitchenerS.Skin cancer medicine in primary care: towards an agenda for quality health outcomes2006184111122-s2.0-31444439327GmajnićR.PribićS.LukićA.EblingB.ČupićN.MarkovićI.Effect of surgical training course on performance of minor surgical procedures in family medicine physicians' offices: an observational study20084933583632-s2.0-4684908306710.3325/cmj.2008.3.358ForbesS. S.FitzgeraldP. G.BirchD. W.Undergraduate surgical training: variations in program objectives and curriculum implementation across Canada200649146502-s2.0-33645068903CollinsA. M.RidgwayP. F.HassanM. S. U.ChouC. W. K.HillA. D.KneafseyB.Surgical instruction for general practitioners: how, who and how often?2010637115611622-s2.0-7795329289810.1016/j.bjps.2009.05.023FriedlichM.WoodT.RegehrG.HurstC.ShamjiF.Structured assessment of minor surgical skills (SAMSS) for clinical clerks20027710, supplementS39S412-s2.0-0036792902HammondI.KarthigasuK.Training, assessment and competency in gynaecologic surgery20062011731872-s2.0-3204446733610.1016/j.bpobgyn.2005.09.006HammoudM. M.NuthalapatyF. S.GoepfertA. R.CaseyP. M.EmmonsS.EspeyE. L.KaczmarczykJ. M.KatzN. T.NeutensJ. J.PeskinE. G.To the point: medical education review of the role of simulators in surgical training200819943383432-s2.0-5294912360910.1016/j.ajog.2008.05.002ReznickR. K.MacRaeH.Teaching surgical skills—changes in the wind200635525266426692-s2.0-3384570032010.1056/NEJMra054785ScottD. J.PughC. M.RitterE. M.JacobsL. M.PellegriniC. A.SachdevaA. K.New directions in simulation-based surgical education and training: validation and transfer of surgical skills, use of nonsurgeons as faculty, use of simulation to screen and select surgery residents, and long-term follow-up of learners201114967357442-s2.0-7995767755010.1016/j.surg.2010.11.010BurdA.ChiuT.McNaughtC.Plastic surgery in the undergraduate curriculum: the importance of considering students' perceptions20045787737792-s2.0-864426607610.1016/j.bjps.2004.05.017RowsellA. R.The place of plastic surgery in the undergraduate surgical curriculum19863922412432-s2.0-0022624984DavisC. R.O'DonoghueJ. M.McPhailJ.GreenA. R.How to improve plastic surgery knowledge, skills and career interest in undergraduates in one day20106310167716812-s2.0-7795669821310.1016/j.bjps.2009.10.023MasonJ.AndroshchukV.MorganH.Re: Davis et al. How to improve plastic surgery knowledge, skills and career interest in undergraduates in one day, Journal of Plastic, Reconstructive and Aesthetic Surgery, vol. 63, pp. 1677–1681, 20102011643, article e872-s2.0-7995167597210.1016/j.bjps.2010.11.003DunkinC. S. J.PleatJ. M.JonesS. A. M.GoodacreT. E. E.Perception and reality—a study of public and professional perceptions of plastic surgery20035654374432-s2.0-004285657110.1016/S0007-1226(03)00188-7Al-NuaimiY.McGroutherG.BayatA.Modernising medical careers in the UK and plastic surgery as a possible career choice: undergraduate opinions20065912147214742-s2.0-3375095025310.1016/j.bjps.2006.04.026PanseN.PanseS.KulkarniP.DhongdeR.SahasrabudheP.Awareness and perception of plastic surgery among healthcare professionals in Pune, India: do they really know what we do?20122012996216910.1155/2012/962169AntoszewskiB.KardasP.KasielskaA.FijalkowskaM.Family physicians' perception of plastic surgery and its influence on referral. A survey from Poland20121812225GreeneA. K.MayJ. W.Jr.Applying to plastic surgery residency: factors associated with medical student career choice20081213104910532-s2.0-4054911955210.1097/01.prs.0000299454.10281.33WadeR. G.MosesM. A.HendersonJ.Teaching plastic surgery to undergraduates20096222672-s2.0-5854910024910.1016/j.bjps.2008.11.004PraterM. A.SmithD. J.Jr.Determining undergraduate curriculum content in plastic surgery19898435295332-s2.0-0024449496PorterJ. M.RaynerC. R. W.FentonO. M.Teaching plastic surgery to medical students199226142472-s2.0-0026580532AghaR. A.PapanikitasA.BaumM.BenjaminI. S.The teaching of surgery in the undergraduate curriculum. Part II—importance and recommendations for change2005321511572-s2.0-2494445038010.1016/j.ijsu.2005.03.016JensenA. R.WrightA. S.LevyA. E.McIntyreL. K.FoyH. M.PellegriniC. A.HorvathK. D.AnastakisD. J.Acquiring basic surgical skills: Is a faculty mentor really needed?2009197182882-s2.0-5764923080610.1016/j.amjsurg.2008.06.039MoultonC. A. E.DubrowskiA.MacRaeH.GrahamB.GroberE.ReznickR.Teaching surgical skills: what kind of practice makes perfect? A randomized, controlled trial200624434004092-s2.0-3374763398710.1097/01.sla.0000234808.85789.6aCzarnowskiC.PonkaD.RughaniR.GeoffrionP.Elliptical excision: minor surgery video series200854811442-s2.0-49649102116JanisJ. E.KwonR. K.LalondeD. H.A practical guide to wound healing20101256230e244e2-s2.0-7795324253710.1097/PRS.0b013e3181d9a0d1GoldbergL. H.AlamM.Elliptical excisions: variations and the eccentric parallelogram200414021761802-s2.0-144230307310.1001/archderm.140.2.176TschoiM.HoyE. A.GranickM. S.Skin flaps20098936436582-s2.0-6564913583710.1016/j.suc.2009.03.004Cannon-BowersJ. A.BowersC.ProcciK.Optimizing learning in surgical simulations: guidelines from the science of learning and human performance20109035836032-s2.0-7795308375410.1016/j.suc.2010.02.006RosenJ. M.LongS. A.McGrathD. M.GreerS. E.Simulation in plastic surgery training and education: the path forward200912327297402-s2.0-6144909582610.1097/PRS.0b013e3181958ec4BastosÉ. M.SilvaR. D. P.Proposal of a synthetic ethylene-vinyl acetate bench model for surgical foundations learning. Suture training20112621491522-s2.0-7995365058110.1590/S0102-86502011000200014DenadaiR.SoutoL. R.Organic bench model to complement the teaching and learning on basic surgical skills20122718894DenadaiR.BastosE. M.Letter: the synthetic ethylene-vinyl acetate bench model2012382288289SilvaR. D.BastosE. M.Cutaneous surgery workshop: some considerations2011386452DenadaiR.Saad-HossneR.OshiiwaM.BastosE. M.Training on synthetic ethylene-vinyl acetate bench model allows novice medical students to acquire suture skills2012273271278DenadaiR.OshiiwaM.Saad-HossneR.Does bench model fidelity interfere in the acquisition of suture skills by novice medical students?2012585600606DenadaiR.OshiiwaM.Saad-HossneR.Teaching elliptical excision skills to novice medical students: a randomized controlled study comparing low- and high-fidelity bench modelsIndian Journal of Dermatology. In pressDenadaiR.Saad-HossneR.SoutoL. R.Simulation-based cutaneous surgical-skill training on a chicken-skin bench model in a medical undergraduate programIndian Journal of Dermatology. In pressTokuharaK. G.BoldtD. W.YamamotoL. G.Teaching suturing in a workshop setting: a comparison of several models20046392582592-s2.0-16544393879Camelo-NunesJ. M.HiratsukaJ.YoshidaM. M.Beltrani-FilhoC. A.OliveiraL. S.NagaeA. C.Ox tongue: an alternative model for surgical training200511613523542-s2.0-2174444914010.1097/01.PRS.0000173550.42201.B5FrancoD.MedeirosJ.GrossiA.FrancoT.Suturing techniques teaching method using bovine tongue20083564424442-s2.0-64549097270TachéS.MbembatiN.MarshallN.TendickF.MkonyC.O'SullivanP.Addressing gaps in surgical skills training by means of low-cost simulation at Muhimbili University in Tanzania20097, article 642-s2.0-6894921719610.1186/1478-4491-7-64KhalilP. N.SiebeckM.MutschlerW.KanzK. G.The use of chicken legs for teaching wound closure skills200914104594602-s2.0-70350115930PurimK. S.Cutaneous surgery workshop201037303305ChanW. Y.DalalM.Cost-effective plastic surgery skills training2010632e136e1372-s2.0-7484911146910.1016/j.bjps.2009.05.054Gutiérrez-MendozaD.Narro-LlorenteR.Contreras-BarreraM. E.Fonte-ÁvalosV.Domíguez-CheritJ.Ethylene vinyl acetate (Foam): an inexpensive and useful tool for teaching suture techniques in dermatologic surgery201137135313572-s2.0-7995747246110.1111/j.1524-4725.2011.02033.xKhalilP. N.KanzK. G.SiebeckM.MutschlerW.Teaching advanced wound closure techniques using cattle digits20113733253302-s2.0-7995275268410.1111/j.1524-4725.2011.01881.xWhallettE. J.McGregorJ. C.An alternative model for teaching basic principles and surgical skills in plastic surgery20116422722742-s2.0-7865070652010.1016/j.bjps.2010.06.017DasturN.DIY surgical knot-tying tool20099132682-s2.0-77949505317SandwellS.HazaniR.KasdanM.An efficient hand-tying technique for vessel ligation20097511109810992-s2.0-70450284610OramD. H.Basic surgical skills20062016171GarciaC.NeuburgM.Carlson-SweetK.A model to teach elliptical excision and basic suturing techniques200614245265272-s2.0-3364608152810.1001/archderm.142.4.526VujevichJ. J.Kimyai-AsadiA.GoldbergL. H.The four angles of cutting2008348108210842-s2.0-4844910408310.1111/j.1524-4725.2008.34212.xKhanM. S.BannS. D.DarziA.ButlerP. E. M.Use of suturing as a measure of technical competence20035033043082-s2.0-003733672510.1097/01.SAP.0000037271.26659.F4AlguireP. C.MathesB. M.Skin biopsy techniques for the internist199813146542-s2.0-003190832010.1046/j.1525-1497.1998.00009.xHussainW.MortimerN. J.SalmonP. J. M.Optimizing technique in elliptical excisional surgery: some pearls for practice200916136976982-s2.0-6914908966210.1111/j.1365-2133.2009.09312.xSilvaR. D.SoutoL. R.Evaluation of the diagnosis and treatment of non-melanoma skin cancer and its impacts on the prevention habits in a specific population of southeastern Brazil20118291301ShimizuR.KishiK.Skin graft20122012556349310.1155/2012/563493WattD. A. L.MajumderS.SouthernS. J.Simulating split-skin graft harvest19995243292-s2.0-0032995618WilsonP. A.RhodesN. D.SouthernS. J.Surgical simulation in plastic surgery20015465605612-s2.0-003485377410.1054/bjps.2001.3602BennettS. P. H.VelanderP.McArthurP. A.McPhailJ.AlviR.GrahamK. E.A novel model for skin graft harvesting20041146166016612-s2.0-1494436996610.1097/01.PRS.0000141485.83476.89CubisonT. C. S.ClareT.Lesagne: a simple model to assess the practical skills of split-skin graft harvesting and meshing20025587037042-s2.0-003602734210.1054/bjps.2002.3947TschoiM.HoyE. A.GranickM. S.Skin flaps20098936436582-s2.0-6564913583710.1016/j.suc.2009.03.004VillafaneO.SouthernS. J.FooI. T. H.Simulated interactive local flaps: operating room models for surgeon and patient alike19995232412-s2.0-0032932018BeardJ. D.JollyB. C.NewbleD. I.ThomasW. E. G.DonnellyJ.SouthgateL. J.Assessing the technical skills of surgical trainees20059267787822-s2.0-2084443593210.1002/bjs.4951SambandanS.The Norwich sebaceous cyst in surgical training19988042742752-s2.0-0031849177BowlingJ.BottingJ.Porcine sebaceous cyst model: an inexpensive, reproducible skin surgery simulator2005318, part 19539562-s2.0-24044481976KöseA. A.KarabaǧliY.AriciM.ÇetinC.Various materials may aid in teaching surgical procedures200411426112-s2.0-434459469410.1097/01.PRS.0000128501.59085.72EricssonK. A.Deliberate practice and the acquisition and maintenance of expert performance in medicine and related domains20047910, supplementS70S812-s2.0-4644318381RogersD. A.RegehrG.MacDonaldJ.A role for error training in surgical technical skill instruction and evaluation200218332422452-s2.0-003621125010.1016/S0002-9610(02)00798-5GrazianoS. C.Randomized surgical training for medical students: resident versus peer-led teaching20112046542.e1542.e42-s2.0-7995809438310.1016/j.ajog.2011.01.038KimM. J.BoehlerM. L.KetchumJ. K.BuenoR.Jr.WilliamsR. G.DunningtonG. L.Skills coaches as part of the educational team: a randomized controlled trial of teaching of a basic surgical skill in the laboratory setting2010199194982-s2.0-7204912478810.1016/j.amjsurg.2009.08.016DubrowskiA.MacRaeH.Randomised, controlled study investigating the optimal instructor: student ratios for teaching suturing skills200640159632-s2.0-3364523218010.1111/j.1365-2929.2005.02347.xvan HoveP. D.TuijthofG. J. M.VerdaasdonkE. G. G.StassenL. P. S.DankelmanJ.Objective assessment of technical surgical skills20109779729872-s2.0-7795362271210.1002/bjs.7115FaulknerH.RegehrG.MartinJ.ReznickR.Validation of an objective structured assessment of technical skill for surgical residents19967112136313652-s2.0-0030469860ReznickR.RegehrG.MacRaeH.MartinJ.McCullochW.Testing technical skill via an innovative “bench station” examination199717332262302-s2.0-003093711110.1016/S0002-9610(97)89597-9KhanM. S.BannS. D.DarziA. W.ButlerP. E. M.Assessing surgical skill using bench station models200712037938002-s2.0-3454791610810.1097/01.prs.0000271072.48594.feGrunwaldT.KrummelT.ShermanR.Advanced technologies in plastic surgery: how new innovations can improve our training and practice20041146155615672-s2.0-1494437066910.1097/01.PRS.0000138242.60324.1DGroberE. D.HamstraS. J.WanzelK. R.ReznickR. K.MatsumotoE. D.SidhuR. S.JarviK. A.The educational impact of bench model fidelity on the acquisition of technical skill: the use of clinically relevant outcome measures200424023743812-s2.0-324267063810.1097/01.sla.0000133346.07434.30GroberE. D.HamstraS. J.WanzelK. R.ReznickR. K.MatsumotoE. D.SidhuR. S.JarviK. A.Laboratory based training in urological microsurgery with bench model simulators: a randomized controlled trial evaluating the durability of technical skill200417213783812-s2.0-3242714828MatsumotoE. D.HamstraS. J.RadomskiS. B.CusimanoM. D.The effect of bench model fidelity on endourological skills: a randomized controlled study20021673124312472-s2.0-0036166080AnastakisD. J.RegehrG.ReznickR. K.CusimanoM.MurnaghanJ.BrownM.HutchisonC.Assessment of technical skills transfer from the bench training model to the human model199917721671702-s2.0-003305983510.1016/S0002-9610(98)00327-4PorteM. C.XeroulisG.ReznickR. K.DubrowskiA.Verbal feedback from an expert is more effective than self-accessed feedback about motion efficiency in learning new surgical skills200719311051102-s2.0-3384556205210.1016/j.amjsurg.2006.03.016MitchellE. L.LeeD. Y.SevdalisN.PartsafasA. W.LandryG. J.LiemT. K.MonetaG. L.Evaluation of distributed practice schedules on retention of a newly acquired surgical skill: a randomized trial2011201131392-s2.0-7865032585110.1016/j.amjsurg.2010.07.040RiegerU. M.PiererK.FarhadiJ.LehmannT.RöersB.PiererG.Effective acquisition of basic surgical techniques through Blended Learning20098065375432-s2.0-6804912766810.1007/s00104-008-1641-4