ISRN Organic Chemistry

Volume 2013 (2013), Article ID 132794, 5 pages

http://dx.doi.org/10.1155/2013/132794

Research Article

Silica-ZnCl₂: An Efficient Catalyst for the Synthesis of 4-Methylcoumarins

Bandita Datta and Mohamed Afzal Pasha

Department of Studies in Chemistry, Central College Campus, Bangalore University, Bengaluru 560001, India

Received 23 September 2013; Accepted 16 October 2013

Academic Editors: L. De Luca, T. C. Dinadayalane, and W. Xia

Copyright © 2013 Bandita Datta and Mohamed Afzal Pasha. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

Silica-ZnCl₂ has been found to be an efficient and eco-friendly catalyst for the synthesis of substituted 4-methylcoumarins from ethyl acetoacetate and substituted phenols under “neat” conditions in an oil bath at 80°C. The experimental procedure is simple, includes shorter reaction times (15–65 min), compatible with sensitive functional groups, and results in excellent yield of the products.

1. Introduction

Since long time, the use of solid phase technique has been considered to be the method of choice for application in a large number of diverse and interesting chemical manipulations. Reactions involving solid-supported catalysts encompass advantages like easy work up of the reaction by filtration of solid-supported reagent, increased reactivity, higher yields of the product, and recyclability of the reagent for subsequent reaction [1]. The utility of the solid-supported reactions has been acknowledged in the synthesis of several chemical libraries. A large number of solid-supported reagents like SiO₂-SO₃H [2], PPA-SiO₂ [3], and HClO₄-SiO₂ [4] have been developed over the period of time and have been used in many chemical reactions. In our laboratory we have developed many silica-based reagents [5], which fascinated us for the development of other solid-supported reagents.

ZnCl₂, being an inexpensive and easily available catalyst, has been demonstrated in chemical reactions as a Lewis acid catalyst [6]. Although it is a user choice catalyst, it is very hygroscopic accompanied with its nonusability. Therefore, we have prepared a silica-ZnCl₂ reagent by Paul’s method [7] which can find application as a user-friendly catalyst. To check its applicability, we wanted to use this catalyst in the preparation of biologically important molecules, whose synthetic preparation can be improved. Hence, we chose the synthesis of substituted coumarins which have a long list of applications.

Coumarins are found to have varied bioactivities including inhibition of platelet aggregation [8], inhibition of steroid 5a-reductase [9], inhibition of HIV-1 protease [10], and antibacterial [11] and anticancer [12] activities. Suitably substituted coumarins have various applications in food additives, pharmaceutical, perfume, and cosmetic industries [13]. Moreover, 7-hydroxy-4-methylcoumarin derivatives have also been used in the synthesis of dendrimers [14]. Since coumarins have become one of the prime molecules of investigation, several groups have started synthesizing molecules with similar moieties for further applications.

Coumarins can be synthesized using several strategies like the Pechmann reaction, Perkin reaction, and Knoevenagel condensation. The widely used scheme is of Pechmann using ethyl acetoacetate and a phenol in the presence of concentrated sulfuric acid as a catalyst [15]. Several other catalysts have also been used including ZnCl₂ [16] which involves harsh conditions, requires longer time, gives lesser yields, and involves tedious workup procedure. Hence, a user-friendly protocol for the synthesis of coumarins needs to be developed. In our laboratory we have been synthesizing synthons, which are used in the synthesis of biologically important molecules like β-enaminones [17], nitriles [18], formamides [19], and so on. In this report, we are presenting a simple and efficient procedure for the synthesis of substituted 4-methylcoumarins using silica-supported ZnCl₂ as a heterogeneous catalyst which can acknowledge the advantages of solid-supported catalysts.

2. Experimental

2.1. Materials and Methods

Ethyl acetoacetate and substituted phenols were commercial products and were used without further purification. Yields refer to yield of the isolated products. Melting points were measured on a RAAGA Indian made melting point apparatus; GC-mass spectra were recorded on a Shimadzu GC-MS QP 5050A instrument.

2.2. Preparation of SiO₂-ZnCl₂

To a mixture of anhydrous ZnCl₂ (3 g) and activated SiO₂ (10 g) in a 100 mL round bottomed flask, DCM (30 mL) was added and the reaction mixture was refluxed for 10 h. SiO₂-ZnCl₂ was obtained as a free-flowing powder after filtration under reduced pressure and dried at 110°C for 12 h, and it was stored in a desiccator over P₂O₅.

2.3. Typical Experimental Procedure

A mixture of ethyl acetoacetate (2 mmol), phenols (2 mmol), and silica-ZnCl₂ (100 mg) was taken in a 50 mL flat-bottomed flask fitted with a condenser, mixed well, and heated in a preheated oil bath at 80°C for 15–65 min. After completion of the reaction (monitored by TLC), the contents were cooled to 25°C and EtOAc (5 mL) was added to the reaction mixture. The solid catalyst was removed by filtration and washed with dry and warm ethanol and kept aside for reuse. The reaction mixture was washed with water (5 mL) and dried over MgSO₄. The solvent was removed under vacuum to get the product. The crude product was further purified either by column chromatography or by recrystallization from ethanol : water (1 : 1). Yields and physical constants of all the products prepared by this procedure are presented in Table 2.

3. Results and Discussion

As part of our ongoing research program for exploring efficient solid-supported catalysts, we used silica-supported ZnCl₂ for the synthesis of coumarins. The stability of this catalyst was determined by thermogravimetric analysis (TGA) and found that there is no loss of physiosorbed and chemisorbed ZnCl₂ from the surface of silica gel and hence the reaction can be carried out at 80°C [20]. On the basis of the elemental analysis of solid-supported ZnCl₂, the probable structure of the catalyst was reported by Olson et. al. (Figure 1) [21].

Figure 1: Olson’s proposed structure of silica-ZnCl₂.

We initiated our investigation with the condensation of ethyl acetoacetate and resorcinol in the presence of silica-supported ZnCl₂ under reflux condition in ethanol. Even after refluxing for 5 h. the desired product was not detected. Hence, we increased the reaction temperature to 80°C and continued the reaction. Though the product was detected, unsatisfactory yield was obtained. In order to obtain the optimum conditions we considered the use of other solvents but obtained poor yields in these solvents. Better result was obtained when the reaction was carried out under solvent-free neat condition (Table 1). We were not very happy with this result also; we still wanted to increase the yield of the product and hence, taking ethyl acetoacetate and resorcinol as a model reaction, we varied the amount of the catalyst used in the reaction. The optimum result was obtained when 100 mg of the catalyst was used. If we increase the quantity to 200 mg no change in the yield of the product is observed, and on reduction to 50 mg poor yield of the desired product was noticed (Scheme 1).

Table 1: Optimization of the reaction conditions using silica-ZnCl₂.

Entry
Amount of silica-ZnCl₂ (mg)
Solvents
Temperature (°C)
Time

Yield (%)a

1
100
Ethanol
60
5 h
ND

2
100
Ethanol
80
5 h
25

3
100
Methanol
reflux
5 h
Trace

4
100
MeCN
80
5 h
10

5
100
DCM
reflux
5 h
ND

6
100
Neat
80
15 min
95

7
200
Neat
80
15 min
89

8
50
Neat
80
15 min
65

Isolated yields. Reaction conditions: ethyl acetoacetate (2 mmol), resorcinol (2 mmol), solvent (5 mL), and silica-ZnCl₂.

Table 2: Synthesis of coumarin derivatives using ethyl acetoacetate and substituted phenols in the presence of silica-ZnCl₂.

Entry
Phenol
Product
Time (min)
Yielda (%)
Melting point (°C)

1

15
95
183-184

2

25
89
130–132

3

20
92
183-184

4

30
90
154-155

5

45
88
221–224

6

45
79
184-185

7

50
80
190-191

8

65
85
243-244

Isolated yields.

Scheme 1: Synthesis of 4-methylcoumarins under neat condition.

To explore the scope of the optimized reaction conditions we extended our procedure to various substituted phenols in the presence of ethyl acetoacetate. We found that the reaction proceeds very efficiently with all electron-withdrawing groups as well as electron-donating groups present in the nucleus of phenol. We used -naphthol and -naphthol also (Table 2) and both gave good yield of the respective products. All the prepared products were characterized by GC-mass spectral analysis, by comparison of the melting points and comparison on TLC with the standard compounds prepared by reported methods.

An advantage of the solid-supported catalyst is its recyclability. In view of development of eco-friendly methodologies, recovery and reuse of the catalyst is highly preferable. Silica-supported ZnCl₂ was easily separated from the reaction medium after adding EtOAc (5 mL), washed with dry and warm ethanol, and reused in the subsequent reactions. As indicated in Figure 2 recycled silica-supported ZnCl₂ showed no loss of efficiency with regard to reaction time, and little loss of yield after four successive runs was noticed which may be due to loss of the catalyst during recovery. The yields of the products for the four cycles are 95, 94, 92, and 92%, respectively.

Figure 2: Recyclability of silica-ZnCl₂ (100 mg) in the present reaction.

4. Conclusion

In conclusion, we have found that the reaction of ethyl acetoacetate and substituted phenols leads to an efficient synthesis of substituted 4-methylcoumarins in good to very high yields within relatively short reaction times using silica-supported ZnCl₂ as a simple and reusable heterogeneous catalyst. The reaction is simple, mild, and convenient and is environment friendly.

Conflict of Interests

The authors declare that there is no conflict of interests, and the authors of the paper do not have a direct financial relation which might lead to a conflict of interests for any of the authors.

Acknowledgment

The authors acknowledge the VGST, Department of IT, BT and Science & Technology, Government of Karnataka, for the financial assistance under the CESEM Award Grant no. 24 (2010-2011).

References

S. V. Ley, I. R. Baxendale, R. N. Bream et al., “Multi-step organic synthesis using solid-supported reagents and scavengers: a new paradigm in chemical library generation,” Journal of the Chemical Society, vol. 1, no. 23, pp. 3815–4195, 2000.

P. Salehi, M. Dabiri, M. A. Zolfigol, and M. A. B. Fard, “Silica sulfuric acid as an efficient and reusable reagent for crossed-aldol condensation of ketones with aromatic aldehydes under solvent-free conditions,” Journal of the Brazilian Chemical Society, vol. 15, no. 5, pp. 773–776, 2004.

H. R. Shaterian, A. Hosseinian, and M. Ghashang, “PPA-SiO₂-catalyzed multicomponent synthesis of amidoalkyl naphthols,” Synthetic Communications, vol. 38, no. 19, pp. 3375–3389, 2008.

M. Maheswara, V. Siddaiah, G. L. V. Damu, and C. V. Rao, “An efficient one-pot synthesis of polyhydroquinoline derivatives via Hantzsch condensation using a heterogeneous catalyst under solvent-free conditions,” Arkivoc, vol. 2006, no. 2, pp. 201–206, 2006.

B. Datta and M. A. Pasha, “Cavitational chemistry: a mild and efficient multi-component synthesis of amidoalkyl-2-naphthols using reusable silica chloride as catalyst under sonic conditions,” Ultrasonics Sonochemistry, vol. 18, no. 2, pp. 624–628, 2011.

L. Rousseau, P. Matlaba, and C. J. Parkinson, “Multicomponent synthesis of imidazo[1,2-a]pyridines using catalytic zinc chloride,” Tetrahedron Letters, vol. 48, no. 23, pp. 4079–4082, 2007.

R. Gupta, M. Gupta, S. Paul, and R. Gupta, “Silica-supported ZnCl₂—a highly active and reusable heterogeneous catalyst for the one-pot synthesis of dihydropyrimidinones-thiones,” Canadian Journal of Chemistry, vol. 85, no. 3, pp. 197–201, 2007.

G. Cravotto, G. M. Nano, G. Palmisano, and S. Tagliapietra, “An asymmetric approach to coumarin anticoagulants via hetero-Diels—Alder cycloaddition,” Tetrahedron Asymmetry, vol. 12, no. 5, pp. 707–709, 2001.

G.-J. Fan, W. Mar, M. K. Park, E. W. Choi, K. Kim, and S. Kim, “A novel class of inhibitors for steroid -reductase: synthesis and evaluation of umbelliferone derivatives,” Bioorganic & Medicinal Chemistry Letters, vol. 11, no. 17, pp. 2361–2363, 2001.

S. Kirkiacharian, D. T. Thuy, S. Sicsic, R. Bakhchinian, R. Kurkjian, and T. Tonnaire, “Structure-activity relationships of some 3-substituted-4-hydroxycoumarins as HIV-1 protease inhibitors,” Il Farmaco, vol. 57, no. 9, pp. 703–708, 2002.

O. Kayser and H. Kolodziej, “Antibacterial activity of extracts and constituents of Pelargonium sidoides and Pelargonium reniforme,” Planta Medica, vol. 63, no. 6, pp. 508–510, 1997.

C.-J. Wang, Y.-J. Hsieh, C.-Y. Chu, Y.-L. Lin, and T.-H. Tseng, “Inhibition of cell cycle progression in human leukemia HL-60 cells by esculetin,” Cancer Letters, vol. 183, no. 2, pp. 163–168, 2002.

M. M. Heravi, S. Sadjadi, H. A. Oskooie, R. H. Shoar, and F. F. Bamoharram, “The synthesis of coumarin-3-carboxylic acids and 3-acetyl-coumarin derivatives using heteropolyacids as heterogeneous and recyclable catalysts,” Catalysis Communications, vol. 9, no. 3, pp. 470–474, 2008.

M. Aydinli, M. Tutaş, B. Atasoy, and O. A. Bozdemir, “Synthesis and characterization of poly(aryl ether) dendritic structures functionalized with coumarin derivatives,” Reactive and Functional Polymers, vol. 65, no. 3, pp. 317–327, 2005.

H. Appel, Journal of the Chemical Society, p. 1031, 1935.

A. J. Nadkarni and N. A. Kudav, “A convenient synthesis of 8-Methoxy-4-methlcoumarin,” Indian Journal of Chemistry B, vol. 20, pp. 240–242, 1981.

B. Datta and M. A. Pasha, “Silica sulfuric acid-mediated synthesis of β-enaminones and β-enaminoesters under microwave irradiation,” Phosphorus, Sulfur and Silicon and the Related Elements, vol. 186, no. 1, pp. 171–177, 2011.

M. B. M. Reddy and M. A. Pasha, “Environment friendly protocol for the synthesis of nitriles from aldehydes,” Chinese Chemical Letters, vol. 21, no. 9, pp. 1025–1028, 2010.

M. B. M. Reddy, S. Ashoka, G. T. Chandrappa, and M. A. Pasha, “Nano-MgO: an efficient catalyst for the synthesis of formamides from amines and formic acid under MWI,” Catalysis Letters, vol. 138, no. 1-2, pp. 82–87, 2010.

F. Tamaddon and F. Tavakoli, “One-pot synthesis of N-tert-amides from alcohols, ethers and esters using ZnCl₂/SiO₂ as a recyclable heterogeneous catalyst,” Journal Molecular Catalysis A, vol. 337, no. 1-2, pp. 52–55, 2011.

E. S. Olson, J. W. Diehl, and R. K. Sharma, Division of Fuel Chemistry American Chemical Society, vol. 35, p. 414, 1990.