A Review of Optimal Energy Management Strategies for Hybrid Electric Vehicle

Presence of an alternative energy source along with the Internal Combustion Engine (ICE) in Hybrid Electric Vehicles (HEVs) appeals for optimal power split between them for minimum fuel consumption and maximum power utilization. Hence HEVs provide better fuel economy compared to ICE based vehicles/conventional vehicle. Energy management strategies are the algorithms that decide the power split between engine and motor in order to improve the fuel economy and optimize the performance of HEVs. This paper describes various energy management strategies available in the literature. A lot of research work has been conducted for energy optimization and the same is extended for Plug-in Hybrid Electric Vehicles (PHEVs). This paper concentrates on the battery powered hybrid vehicles. Numerous methods are introduced in the literature and based on these, several control strategies are proposed.These control strategies are summarized here in a coherent framework.This paper will serve as a ready reference for the researchers working in the area of energy optimization of hybrid vehicles.


Introduction
Hybrid Electric Vehicles (HEVs) and Plug-in Hybrid Electric Vehicles (PHEVs) consist of two power sources, that is, (1) Internal Combustion Engine (ICE) and (2) battery.Power split between these two is of utmost importance to minimize the fuel consumption without affecting the vehicle speed.The literature reveals that various power split strategies have been developed and implemented.These strategies vary in optimization type (global or local), computational time, structural complexity, a priori knowledge of driving pattern, and effectiveness of the algorithm.A survey of these available methods would be of great use for researchers and practitioners working on HEVs/PHEVs.This paper includes several powerful methods of energy optimization proposed in the literature.
These methods are not mutually exclusive and can be used alone or in combinations.The authors have compiled more than 180 papers cognate with optimal performance of HEVs/PHEVs published till 2012.The authors apologize if any paper, method, or improvement is unintentionally omitted.Figure 1 shows the summary of papers published from various refereed journals, conferences, and magazines.This data is based on the papers studied and cited in this paper.

Emergence of Hybrid Electric Vehicle
Automobiles have made great contribution to the growth of modern society by satisfying the needs for greater mobility in everyday life.The development of ICE has contributed a lot to the automobile sector.But large amounts of toxic emissions in the form of carbon dioxide (CO 2 ), carbon monoxide (CO), nitrogen oxides (NO x ), unburned hydrocarbons (HCs), and so forth have been causing pollution problems, global warming, and destruction of the ozone layer.These emissions are a serious threat to the environment and human life.Also, as petroleum resources are limited, consumption of petroleum needs to be reduced.One prominent solution to these problems is to go for an alternate transportation technology, which uses ICE as primary power source and batteries/electric motor as peaking power source.This concept has brought the new transportation medium such as Electric Vehicles (EVs), HEVs and PHEVs, which are clean, economical, efficient, and environment friendly.The EVs are enabled by high efficiency electric motor and controller and powered by alternative energy sources.The first EV was built by a Frenchman Gustave Trouve in 1881.It was a tricycle powered by a 0.1 hp direct current motor fed by lead-acid batteries.EV is a clean, efficient, and environment friendly urban transportation medium but has limited range of operation.
Due to higher battery cost, limited driving range, and performance of EVs, HEVs came into existence.HEVs use both electric machine and an ICE to deliver power during vehicle propulsion.It has advantages of both ICE vehicles and EVs and eliminates their disadvantages [1].In HEVs battery is the supportive power system to ICE during vehicle propulsion and hence reduces the liquid fuel consumption and toxic emissions.In 1901 Ferdinand Porsche developed the Lohner-Porsche Mixte Hybrid, the first gasoline-electric hybrid vehicle [2].
In HEVs batteries are charged either by engine or by regenerative braking and are not plugged-in externally which limits its electric range.They also take longer time in recharging.PHEVs offer a promising medium-term solution to reduce the energy demand as the batteries are charged through the grid.PHEVs are displacing liquid fuels by storing the energy in a battery with cheaper grid electricity [3].PHEVs have a large on-board rechargeable battery and larger sized motors compared to HEVs.Presence of larger size battery with high energy capacity increases the fuel efficiency of PHEVs.In PHEVs battery is used as primary power source and ICE as secondary power source.The battery can be recharged through mains power supply anywhere at home, parking lots, or garages.

Architecture of Hybrid Electric Vehicles
HEVs are classified mainly into three categories: (1) series hybrid, (2) parallel hybrid, and (3) series-parallel (powersplit) hybrid.The series configuration consists of an electric motor with an ICE without any mechanical connection between them.ICE is used for running a generator when the battery does not have enough power to drive the vehicle; that is, ICE drives an electric generator instead of directly driving the wheels.Series hybrids have only one drive train but require two distinct energy conversion processes for all operations.These two energy conversion processes are gasoline to electricity and electricity to drive wheels.Fisher Karma, Renault Kangoo, Coaster light duty bus, Orion bus, Opel Flextreme, and Swiss auto REX VW polo use series configuration.
In parallel configuration, single electric motor and ICE are installed in such a way that both individually or together can drive the vehicle.Parallel hybrids allow both power sources to work simultaneously to attain optimum performance.While this strategy allows for greater efficiency and performance, the transmission and drive train are more complicated and expensive.Parallel configuration is more complex than the series, but it is advantageous.Honda's Insight, Civic, Accord, General Motors Parallel Hybrid Trucks, BAS Hybrid such as Saturn VAU and Aura Greenline, and Chevrolet Mali by hybrids utilize parallel configuration.
Power split hybrid has a combination of both series and parallel configuration in a single frame.In this configuration engine and battery can, either alone or together, power the vehicle and battery can be charged simultaneously through the engine.Basically, it extends the all-electric range (AER) of hybrid vehicle.The current dominant architecture is the power-split configuration which is categorized into two modes: (1) one (single) mode and ( 2) two (dual) modes.Single mode contains one planetary gear set (PGS) and dual mode contains two PGS which are required for a compound power split.It is further classified into three types: (1) input split, (2) output split, and (3) compound split as determined by the method of power delivery.
In the input split power configuration or single mode electromechanical infinitely variable transmission (EVT), planetary gear is located at the input side as shown in Figure 2(a).The input power from the ICE is split at the planetary gear.It gives low efficiency at high vehicle speed [4].Toyota Prius employs an input split power configuration.
The output split power train consists of one planetary gear at the output side as shown in Figure 2(b).The output split system uses power recirculation at low vehicle speed and power splitting at high vehicle speed.Power recirculation means that a portion of the engine power is recirculated by the charging of any one motor/generator and discharging of the other.Due to charging and discharging efficiency of the motors, recirculated power negatively affects the system efficiency.Hence output split power train displays poor performance at low vehicle speed compared to input split [5].Chevrolet volt uses output split configuration.
In dual mode configuration, the two clutches provide a torque advantage of the motor at low speed while fundamentally changing the power flow through the transmission as shown in Figure 2(c).When the first clutch is applied and the second clutch is open, the system operates as an input split.When the second clutch is applied and the first clutch is released, the system operates as a compound split.This hybrid can shift between these two (input-split as well as compound-split) in a synchronous shift, involving only torque transfer between elements without sharp changes in the speeds of any element.Lexus HS250h, Lexus RX400h, Toyota Camry and Highlander, Lexus GS450h, and Lexus LS600h use compound split configuration.The combination of a compound split and an input split enables a two-mode hybrid system.The use of dual mode solves the problems of the single mode power train and provides better vehicle performance with respect to fuel economy, acceleration, and motor size.In dual mode, PGS are used for both the input split and compound split [6].Two-mode hybrids includes General Motors two-mode hybrid full-size trucks and SUVs, BMW X6 Active Hybrid and Mercedes ML 450 hybrid, Allison EV Drive, Chrysler Aspen, Chevrolet Tahoe, and GMC Yukon hybrid (GHC, 2013).
All the configurations of HEV can be employed in PHEV's drive trains.In PHEVs battery is initially charged through the mains power supply to the full capacity, which supports HEV architecture to propel it for longer distances with a very less fuel consumption.

Problem Overview
The presence of two power sources focuses on the need of designing an energy management strategy to split power between them.The strategy should be able to minimize the fuel consumption and maximize the power utilization.In HEVs, the battery is a supporting power source which gets charged when ICE powers the vehicle and also through regenerative braking.In HEVs the state of charge (SOC) of the battery is the same at the start and end of the trip; that is, it works in charge sustaining mode.In PHEVs, the batteries are charged through mains; therefore it can be depleted to the permissible minimum level at the end of the trip; that is, it works in a charge depletion mode.PHEVs may call upon to work in charge sustaining, charge depletion, or combination of both based on the requirement.

Overview of Different Optimization Strategies
Due to the complex structure of HEVs/PHEVs, the design of control strategies is a challenging task.The preliminary objective of the control strategy is to satisfy the driver's power demand with minimum fuel consumption and toxic emissions and with optimum vehicle performance.Moreover, fuel economy and emissions minimization are conflicting objectives; a smart control strategy should satisfy a trade-off between them.Various control strategies are proposed for optimal performance of HEVs/PHEVs.The strategies published till 2012 are reviewed and categorized here.A detailed overview of different existing control strategies along with their merits and demerits is presented.A broad classification of these strategies is given in Figure 3.All these strategies are compared in terms of structural complexity, computation time, type of solution (real, global, and local), and a priori knowledge of driving pattern.
There is no commonly accepted answer for "structural complexity" but the intersection of almost all answers is International Journal of Vehicular Technology  nonempty.Structural complexity deals with the complexity classes, internal structure of complexity classes, and relations between different complexity classes.Complexity class is a set of problems of related source-based complexity and can be characterized in terms of mathematical logic needed to express them.Computation time is the length of time required to perform a computational process.
A controller designed for a particular set of parameters is said to be robust if it performs fairly well under a different set of assumptions.To deal with uncertainty, robust controllers are designed to function properly with uncertain parameter set or disturbance set.
Local optimal of an optimization problem is optimal (either maximal or minimal) within a neighboring set of solutions.A global optimal, in contrast to local, is the optimal solution amongst all possible solutions of an optimization problem.
Control strategies are broadly classified into rule-based and optimization-based control strategy and all other subcategories are classified based on these two main categories.

Rule-Based Control Strategies.
Rule-based control strategies are fundamental control schemes that depend on mode of operation.They can be easily implemented with real-time supervisory control to manage the power flow in a hybrid drive train.The rules are determined based on human intelligence, heuristics, or mathematical models and generally without prior knowledge of a drive cycle.
The rule-based controllers are static controllers.Basically, the operating point of the components (ICE, traction motor, and generator, etc.) is chosen using rule tables or flowcharts to meet the requirements of the driver and other components (electrical loads and battery) in the most efficient way.The decisions are related to instantaneous inputs only.This strategy is further subcategorized into deterministic rulebased and fuzzy rule-based.
By recognizing the road load, an energy management system for belt driven starter generator (BSG) type hybrid vehicle is developed by Shaohua et al. [7].It gives a good fuel economy as well as launch performance.The dynamic performance and drivability are also improved at the same time.For energy and power management of multisource (battery and super-capacitor) hybrid vehicles, a two-level management scheme is formulated.First level uses a certain set of rules to restrict the search area and second level uses a metaheuristic approach.Trovão et al. [8] provide a quality solution for sharing energy online between the two energy sources with improved range and extended battery life.

Deterministic Rule-Based Control Strategy.
The rules are designed with the aid of fuel economy or emission data, ICE operating maps, power flow within the drive train, and driving experience.Implementation of rules is performed via lookup tables to share the power demand between the ICE and the electric traction motor.Kim et al. [9] proposed a concept of hybrid optimal operation line for parallel HEV, which is derived based on effective specific fuel consumption with continuously varying transmission (CVT).They determined the optimal values of parameters (such as a CVT gear ratio, motor torque, and engine throttle) while maximizing overall system efficiency.For the optimal robust control, [10] developed a rule-based control algorithm and tuned it for different work cycles.
Thermostat control strategy uses the generator and ICE to generate electrical energy used by the vehicle.In this strategy the battery SOC is always maintained between predefined high and low levels, by simply turning on/off the ICE.Although the strategy is simple, it is unable to supply necessary power demand in all operating modes.
Electric assist control strategy utilizes ICE as the main source of power supply and electric motor to supply additional power when demanded by the vehicle.Due to charge sustaining operation, the battery SOC is maintained during all operating modes.

Fuzzy
Rule-Based Control Strategy.L. A. Zadeh introduced the term fuzzy logic and described the mathematics of fuzzy set theory.Fuzzy logic system is unique to handle numerical data and linguistic knowledge simultaneously.Fuzzy sets represent linguistic labels or term sets such as slow, fast, low, medium, high, and so forth.In fuzzy logic, the truth of any statement is a matter of degree.Fuzzy control is simple, easy to realize, and has strong robustness.It can converse experience of designer to control rules directly.Fuzzy logic is a form of multivalued logic derived from fuzzy set theory to deal with reasoning that is approximate rather than precise.
Intelligent control is performed using fuzzy logic as a tool.Fuzzy logic enables the development of rule-based behavior.The knowledge of an expert can be coded in the form of a rule base and used in decision making.The main advantage of fuzzy logic is that it can be tuned and adapted if necessary, thus enhancing the degree of freedom of control.It is also a nonlinear structure and is especially useful in a complex system such as an advanced power train.In essence a fuzzy logic controller (FLC) is a natural extension of many rules based controllers implemented (via lookup tables) in many vehicles today.Fuzzy logic based methods are insensitive to model uncertainties and are robust against the measurement of noises and disturbances but require a faster microcontroller with larger memory.
(a) Traditional Fuzzy Control Strategy.Efficiency is decided based on the selection of input, output, and rule-based control strategy.Two operating modes, namely, optimize fuel use and fuzzy efficiency modes, are used to control drive train operation.The fuzzy logic controller accepts battery SOC and the desired ICE torque as inputs.Based on these inputs as well as the selected mode, the ICE operating point is set.The power required by the electric traction motor is the difference of total load power required and power required from ICE.
In the optimum fuel use strategy, the FLC limits instantaneous fuel consumption, calculated from the fuel use map, and maintains sufficient battery SOC, while delivering demanded torque.In the fuzzy efficiency strategy, the ICE has operated in its most efficient operating region.The operating points of the ICE are set near the torque region, where efficiency is highest at a particular engine speed.Load balancing is achieved using electric motors.This control strategy uses a motor to force ICE to operate in the region of minimal fuel consumption, while maintaining SOC in battery.Load balancing is necessary to meet power demand and avoid unnecessary charging and discharging of the electrical storage system (ESS).A major drawback of this control strategy is that the peak efficiency points are near high torque region; thereby ICE generates more torque than required, which in turn increases fuel consumption.Also, during load balancing, heavy regeneration overcharges the ESS.To avoid this, the control strategy should be used with a downsized ICE.
(b) Adaptive Fuzzy Control Strategy.This strategy can optimize both fuel efficiency and emissions simultaneously.However, fuel economy and emissions are conflicting objectives, which means that an optimal solution cannot be achieved by satisfying all the objectives.The optimal operating point can be obtained using weighted-sum approach optimization of conflicting objectives.Due to various driving conditions, appropriate weights have to be tuned for fuel economy and emissions.Considering stringent air pollution laws, operating points with high emissions are heavily penalized.The conflicting objectives within the adaptive fuzzy logic controller include fuel economy, NO x , CO, and HC emissions.In order to measure the interrelationship of the four contending optimizing objectives with a uniform standard, it is essential to normalize the values of fuel economy and emissions by utilizing the optimal values of fuel consumption and emissions at current speed.The optimal values of fuel economy and emissions at particular ICE speed can be obtained from the ICE data map.
The relative weights are adaptively assigned to each parameter based on their importance in different driving environments.Moreover, weights must be selected for each ICE, based on their individual data maps.This control strategy is able to control any one of the objectives, by changing the values of relative weights.Further, tremendous reduction in vehicle emission is achieved, with negligible compromise in fuel economy.
(c) Predictive Fuzzy Control Strategy.If the information on the driving trip is a priori known, it is extremely trivial to obtain a global optimum solution, to minimize fuel consumption and emissions.However, the primary obstacles entail acquiring further information on planned driving routes and performing real-time control.This problem can be resolved using global positioning system (GPS) which can easily identify the probable obstacles like heavy traffic or a steep grade.The control strategies can be developed for specific situations; for example, if a vehicle is running on a highway and will enter into a city (where heavy traffic may be encountered), it is advised to restore more energy by charging the batteries, for later use.General inputs to the predictive FLC are vehicle speed variations, the speed state of the vehicle in a lookahead window, and elevation of sampled points along a predetermined route.Based on the available history of vehicle motion and its variability in the near future, FLC determines the optimal torque that ICE contributes to the current vehicle speed.The predictive FLC outputs a normalized GPS signal in (−1, +1), which informs the master controller to charge or discharge the batteries and to restore enough energy for future vehicle operating modes.
Being robust and fast, it is advised to design FLCs for nonlinear and uncertain systems.FLCs result in small overshoot, short adjustment time, and good dynamic/static quality.Using mix-modelling approach, Arsie et al. [11] implement an FLC to control the parameters related to the driver-vehicle interaction, torque management, and battery recharging strategy.To improve energy conversion efficiency, several fuzzy logic based energy management strategies are implemented [12][13][14].Galichet and Foulloy [15] implement a fuzzy logic based proportional integral (PI) controller for nonlinear control of the plants.Lee et al. [16] introduce an FLC for driving strategy implementation.This is useful for nonlinear and uncertain systems and is not affected by vehicle load variation and road pattern.Brahma et al. [17] design an HEV modelling tool using FLC to optimize the fuel consumption which may be used to implement any desired model.Baumann et al. [18] demonstrate the effectiveness of FLC to increase the fuel economy and show that it works well for a nonlinear, multidomain, and time-varying plant.Tao and Taur [19] design a less complex PID-like FLC with a heuristic functional scaling which is easy to adjust even in the absence of the plant's complete mathematical model.Won and Langari [20] design an FLC for torque distribution.Schouten et al. [21] apply driver command, battery SOC, and motor/generator speed as fuzzy sets to design an FLC for parallel HEVs.Patel and Mohan [22] design a very simple PI controller using fuzzy logic with less number of universes of discourse.Intelligent energy management agent (IEMA) is implemented for torque distribution and charge sustenance on the basis of current vehicle state, driver demand, and available online drive cycle data [23].Bathaee et al. [24] implement a FL based torque controlled optimal energy management strategy for parallel HEV.Zeng and Huang [25] and Khoucha et al. [26] design (1) SOC based and (2) desired torque based FLCs for parallel HEV to optimize power split.Jianlong et al. [27] propose an effective, fast, and compact fuzzy supervisory controller with double input single output.Golkar and Hajizadeh [28] implement fuzzy logic based real-time intelligent controllers which optimally settle ICE torque and vehicle drivability with reduced fuel consumption and emissions.Syed et al. [29] implement a dynamic model of HEV, which is capable of analyzing the steady state and transient behavior of vehicle under different driving situations.Poursamad and Montazeri [30] introduce a genetic algorithm tuned FLC to minimize the fuel consumption and emissions and to improve the driving performance of a parallel HEV.Liu et al. [31] propose a battery SOC and power notification based FLC for series HEV.In this method, a high level of energy is always maintained and the engine works in the high efficiency region.Syed et al. [32] design an FLC to intelligently control the engine power and speed in an HEV.In this scheme, the required gain of PI controller is decided by fuzzy gain scheduling based on system's operating conditions.It improves the response and settling time and eliminates overshoots.Zhou et al. [33] devise an FLC for toque demand and battery SOC (as input) and required torque (as output) based on particle swarm optimization (PSO) for energy management in a parallel HEV.To improve its accuracy, adaptability, and robustness, a compressibility factor was used with PSO.Won and Langari [34] propose an intelligent energy management strategy, based on the concept of driving situation awareness for parallel HEV.The authors basically implemented an IEMA which gives knowledge about driving situation awareness.Lu et al. [35] implement FLC for torque distribution between engine and motor in a PHEV.They simulated the controller using ADVISOR for the different driving/road conditions and showed a significant reduction in exhaust gases and improvement in fuel economy.Kachroudi et al. [36] design a predictive decision support system for optimal energy flow distribution among engine and other auxiliaries.They determined the global optimum using PSO, which was further validated using hardware-inloop (HIL) technique.Fu et al. [37] designed a fuzzy control, energy management strategy, using ADVISOR and claimed improvement in the fuel economy with a reduction in the toxic emissions.

Optimization-Based Control Strategy.
In optimizationbased control strategies, the goal of a controller is to minimize the cost function.The cost function (objective function) for an HEV may include the emission, fuel consumption, and torque depending on the application.Global optimum solutions can be obtained by performing optimization over a fixed DC.These control techniques do not result in real-time energy management directly, but, based on an instantaneous cost function, a real-time control strategy can be obtained.This instantaneous cost function relies on the system variables at the current time only.It should include equivalent fuel consumption to guarantee self-sustainability of electrical path.Optimization-based control strategies can be divided into two main groups, namely, global optimization and realtime optimization.These are discussed in the following sections in detail.

Global Optimization. A global optimization technique
for energy management strategy in an HEV requires the knowledge of entire driving pattern which includes battery SOC, driving conditions, driver response, and the route.Due to computational complexity, they are not easily implementable for real-time applications.Linear programming, dynamic programming, genetic algorithms, and so forth are used here to resolve vehicle energy management issues.Based on optimal control theory and assuming that minimizing the fuel consumption reduces the pollutant emissions, a global optimization algorithm is developed [38].Delprat et al. [39] propose a global optimization strategy for HEVs performance analysis but do not provide optimal results.Delprat et al. [40] suggest a global optimization strategy for known driving cycle (DC) and for all SOC ranges.This offers the quick global optimal solution and minimizes the fuel consumption.To get a better optimal solution for HEV design and control, another global optimization technique has been suggested by [41].
(1) Linear Programming.The fuel economy optimization is considered as a convex nonlinear optimization problem, which is finally approximated by linear programming method.Linear programming is mostly used for fuel efficiency optimization in series HEVs.Formulation of fuel efficiency optimization problem using linear programming may result in a global optimal solution.
In hybrid power trains, better degree of freedom to control exists.By controlling the gear ratio and torque, an optimized design and control of a series hybrid vehicle are proposed in [42].The problem is formulated as a nonlinear convex optimization problem and approximated as a linear programming problem to find the fuel efficiency.Kleimaier and Schroeder [43] propose a convex optimization technique for analysis of propulsion capabilities using linear programming, which provides independence from any specific control law.Pisu et al. [44] design supervisory control strategies for hybrid electric drive trains to minimize fuel consumption.They designed a stable and robust controller using linear matrix inequalities.Miaohua and Houyu [45] design a sequential quadratic programming based energy management strategy to minimize fuel consumption.They consider balanced SOC as a constraint and showed improved results.
(2) Dynamic Programming.Dynamic programming (DP) was originally used in 1940 by Richard Bellman to describe the process of solving problems where one needs to find the best decisions successively.DP is both a mathematical optimization method and a computer programming method.In both contexts, it refers to simplifying a complicated problem by breaking it into simpler subproblems in a recursive manner.
The very essence of this technique is based on the principle of optimality.Having a dynamical process and the corresponding performance function, there are two ways to approach the optimal solution to the problem.One is the Pontryagin's maximum principle and the other is Bellman's dynamic programming.It has the advantage of being applicable to both linear and nonlinear systems as well as constrained and unconstrained problems.But it also suffers from a severe disadvantage called curse of dimensionality which amplifies the computational burden and limits its application to complicated systems.
Since the knowledge of the duty cycle is required beforehand, the DP algorithm cannot be implemented in real time.However, its outputs can be used to formulate and tune actual controllers.The power management strategy in an HEV is computed through dynamic optimization approach by various researchers as mentioned below.
Power optimization can be done offline for known DC using deterministic DP [46,47].An adaptive neural-fuzzy inference system (ANFIS) along with DP is used to get the optimal solution to the problem [48].Using DP and a rulebased approach, optimal power split between both of energy sources is obtained for a series HEV [49].They suggest that to increase computational efficiency, the discrete state formulation approach of DP should be used.To reduce the fuel consumption, a DP based optimal control strategy for a parallel hybrid electric truck is reported in [50].They developed a feedforward, parallel HEV simulator in order to maximize fuel efficiency and proposed DP and rule-based power optimization algorithm for sustaining mode of battery operation.Sundstrom et al. [51] study the hybridization ratio of two types of parallel HEVs, namely, (1) torque assist and (2) full hybrid.Further, using DP optimal fuel consumption is achieved for different hybridization ratios.The results show that both fuel consumption and need of hybridization are less in case of the full hybrid model.A medium-duty hybrid electric truck is implemented using DP [52] to optimize the power and fuel economy.It results in 45% higher fuel economy than ICE truck.A near optimal power management strategy is obtained using DP, considering sustained SOC as a constraint.Koot et al. [53] proposed an energy management strategy for HEVs and verified it through DP, quadratic programming, and modified DP (DP1) strategies.DP takes large time as number of computation increases with the DC length.To reduce the computation time for longer DCs, quadratic programming is used which also promises global solution.In DP1, the complete DC is divided into various segments and DP is implemented in incremented steps for entire DC.DP1 is preferred over DP and quadratic programming as it does not require future knowledge of DC and exploits nonconvexity of cost function.Further, it is easy to implement online.Electric vehicle centric and engine-motor blended control strategies which are applicable to PHEVs using DP to get an optimal power split are explored by [54].They concluded that, for urban driving pattern, electric vehicle centric control strategy provides better fuel economy over others.To keep energy levels in a prescribed range without affecting the battery health in HEVs, [55] formulated a finite horizon dynamical optimization problem and solved it using DP.Gong et al. [56] implement a power optimization strategy using DP for PHEVs in charge depletion mode.For global optimization of charge depletion control of PHEVs, two-scale DP approach is adapted which results in reduction of fuel consumption by 3.7% compared to conventional DP.Van Keulen et al. [57] solve an energy management problem for HEVs and optimize it using DP in charge sustaining mode.Gong et al. [58] use an efficient on-board implementable two-scale DP for PHEVs to get a global optimal solution.Electric mode of operation is used first for known trip distance.The rest of the distance is divided into different segments of known length and for each segment fuel consumption and SOC level are calculated.Finally, spatial domain optimization is performed to find the solution.Sundström and Guzzella [59] propose a generic DP function, to solve discrete time optimal control problem using Bellman's DP algorithm.The authors in [60,61] use DP and on-board implementable energy consumption minimization strategy (ECMS) for charge depletion mode operation.They conclude that, for long distances and large size batteries, ECMS and DP provide a similar fuel economy and SOC profile.Shen and Chaoying [62] used an improved DP to solve optimal control problem to reduce computation time using a forward search algorithm.Along with DP, International Journal of Vehicular Technology classical optimal control theory is applied to reduce the fuel consumption in parallel HEVs for a known route profile.This results in an improvement of 11% in fuel economy as compared to standard city drive cycle [63].Kum et al. [64] firstly found an optimal solution using DP and estimate battery SOC with respect to remaining trip distance using energy-to-distance ratio (EDR).Then they implement an adaptive supervisory power train controller (SPC) to reduce fuel consumption and emissions based on extracted results from EDR and catalyst temperature system.For a multisource HEV containing gen set, [65] proposed a DP for optimizing power management system.In case of known trip distance it can give global optimal solution and save 12.6% gasoline.Li and Kar [66] use DP to design a power split device (PSD) in PHEVs, which minimizes the fuel consumption and enhances the vehicle performance.Ravey et al. [67] initially propose a method to minimize the size of the components (energy source) using genetic algorithm.Later they use DP to optimize the power management strategy and claim a higher fuel economy.Shams-Zahraei et al. [68] implement an optimal energy management strategy using DP considering the significance of temperature noise factors.With the variation in temperature, fuel efficiency, and emissions, energy management system changes even for the same driving patterns and conditions.
(3) Stochastic Control Strategy.Stochastic strategy is a framework for modelling, optimization problems that involve uncertainty.In this strategy, an infinite-horizon stochastic dynamic optimization problem is formulated.The power demand from the driver is modelled as a random Markov process.The Markov driver model predicts the future power demands by generating the probability distribution for them.The past decisions are not required for this prediction.The optimal control strategy is then obtained using stochastic dynamic programming (SDP).The obtained control law is in the form of a stationary full-state feedback and can be directly implemented.It is found that the obtained SDP control algorithm outperforms a suboptimal rule-based control strategy trained from deterministic DP results.As opposed to deterministic optimization over a given DC, the stochastic approach optimizes the control policy over a family of diverse driving patterns.
(a) Stochastic Dynamic Programming.Optimization method which uses random variables to formulate an optimization problem is called stochastic optimization.In dynamic programming if either state or decision is known in terms of probability function, it is called stochastic dynamic programming (SDP).A high performance computing technique is required to solve the stochastic optimal control problem.
For better optimality in comparison to supervisory control strategy, [69] proposes an infinite-horizon SDP in which power demand by the driver is modelled as a random Markov process.The control law obtained is real-time implementable in HEVs.In a parallel hybrid electric truck, both infinitehorizon SDP and shortest path SDP (SP-SDP) optimization problems are formulated which yield a time-invariant causal state-feedback controller.In SP-SDP power management strategy variation of battery SOC from a desired set-point is allowed to get a trade-off between fuel consumption and emissions.The SP-SDP based controller is advantageous over SDP as it offers better SOC control and less number of parameters to be tuned [70].Using SDP, [71] formulated a hybrid power optimal control strategy using engine-in-loop (EIL) setup, which instantly analyzes the effect of transients on engine emissions.Tate et al. [72] used the SP-SDP to find a trade-off between fuel consumption and tailpipe emissions for an HEV, facilitated with a dual mode EVT.With simple methods SP-SDP solution takes eight thousand hours while using linear programming and duality it takes only three hours.Moura et al. [73] presented a power optimization strategy for PHEVs using SDP to optimize the power split between ICE and electric motor for a number of DCs.At the same time, authors proposed a trade-off for electricity and liquid fuel usage and also analyzed the relative fuel and electricity price variation for optimal performance.Using SP-SDP, [74] proposes a real-time energy management controller.This considers drive cycle as a stationary-finite scale Markov process.This controller is found to be 11% more efficient than an industrial baseline controller.Wang and Sun [75] propose an SDP-extremum seeking (SDP-ES) algorithm with statefeedback control.It contains the nature of global optimality of SDP and SOC sustainability.Further extremum seeking output feedback compensates for its optimal control error.Opila et al. [76] develop an energy management strategy based on SDP and implemented successfully in a prototype HEV.The feature of this controller is that they run in realtime embedded hardware with classic automotive computing ability and the energy management strategy gets updated very frequently to yield a strong driving characteristic.
(b) Genetic Algorithm.Genetic algorithm (GA) is a heuristic search algorithm to generate the solution to optimization and search problems.Thus a branch of artificial intelligence is inspired by Darvin's theory of evolution.GA begins with a set of solutions (chromosomes) called a population.The solutions from one population are taken according to their fitness to form new ones.Most suitable solutions will get a better chance than the poorer solutions to grow and the process is repeated until the desired condition is satisfied.GA is a robust and feasible approach with a wide range of search space and rapidly optimizes the parameters using simple operations.They are proven to be effective to solve complex engineering optimization problems, characterized by nonlinear, multimodal, nonconvex objective functions.GA is efficient at searching the global optima, without getting stuck in local optima.
Unlike the conventional gradient based method, GA technique does not require any strong assumption or additional information about objective parameters.GA can also explore the solution space very efficiently.However, this method is very time consuming and does not provide a broader view to the designer.
Piccolo et al. [77] utilize GA for energy management of an on-road vehicle and minimize the cost function containing fuel consumption and emission terms.For dynamic and unpredictable driving situations, a fuzzy clustering criterion is used with GA which reduces the computational effort and improves the fuel economy [78].GA in HEVs is used simultaneously to optimize the component sizes and to minimize the fuel consumption and emissions [79][80][81][82][83][84].Wang and Yang [85] implement a robust, easy, and real-time implementable FL based energy management strategy and use the GA to tune and optimize the same.To optimize the fuel consumption and emissions in a series HEV, GA based control strategy has been used by [86].It is a flexible and global optimal multiobjective control strategy which is found to be better than thermostatic and divide rectangle (DIRECT) algorithm.Reference [87] uses multiobjective genetic algorithm (MOGA) to solve an optimization problem for series HEV.Control strategy based on MOGA is flexible, multiobjective and gives global optimal.A MOGA is further used by [88,89] to solve the optimization problem of HEVs which optimizes control system and power train parameters simultaneously and yields a Pareto-optimal solution.Montazeri-Gh et al. [90] present a genetic-fuzzy approach and find an optimal region for the engine to work.It provides an optimal solution to the optimization problem.Wimalendra et al. [91] applied GA to parallel HEV to find the optimal power split for improved vehicle performance and also promise to give maximum fuel economy for known DC for a parallel HEV using GA.References [30,92] implemented fuzzy control strategy for reduced fuel consumption and emissions which is optimized by GA.MOGA is developed to reduce fuel consumption and emissions as well as to optimize power train component sizing [93].Using nondominated sorting genetic algorithm (NSGA), a Paretooptimal solution is obtained for reduced component sizing, fuel consumption, and emissions [94].
A genetic algorithm is a powerful optimization tool which is particularly appropriate to multiobjective optimization.The ability to sample trade-off surfaces in a global, efficient, and directed way is very important for the extra knowledge it provides.In the case where there are two or more equivalent optima, the GA is known to drift towards one of them in a long term perspective.This phenomenon of genetic drift has been well observed in nature and is due to the populations being finite.It becomes more and more important as the populations get smaller.NSGA varies from GA only in the way the selection operator works.Crossover and mutation operations remain the same.This is similar to the simple GA except the classification of nondominated fronts and sharing operations.MOGA is a modification of GA at selection level.MOGA may not be able to find the multiple solutions in case where different Pareto-optimal points correspond to the same objective.

Real-Time Optimization.
Due to the causal nature of global optimization techniques, they are not suitable for realtime analysis.Therefore, global criterion is reduced to an instantaneous optimization, by introducing a cost function that depends only on the present state of the system parameters.Global optimization techniques do not consider variations of battery SOC in the problem.Hence, a real-time optimization is performed for power split while maintaining the battery charge.
Instantaneous optimization techniques based on simplified model and/or efficiency maps are proposed in [95,96].Reference [95] presents the concept of real-time control strategy for efficiency and emission optimization of a parallel HEV.It considers all engine-motor torque pairs which forecast the energy consumption and emissions for every given point.Reference [96] developed a control strategy for parallel hybrid vehicle in a charge sustaining mode of operation for instantaneous fuel efficiency optimization.And to implement the global constraint, the authors developed a nonlinear penalty function in terms of battery SOC deviation from its desired value.
(1) Equivalent Consumption Minimization Strategy.Paganelli et al. propose the concept of equivalent fuel consumption for energy management strategy.It reduces a global optimization problem into an instantaneous minimization problem and provides solution at each instant.Energy consumption minimization strategy (ECMS) calculates the fuel equivalent as a function of current system status and quantities measurable on board, online.It does not require prior knowledge of driving pattern to get an optimal solution and it is real-time implementable.
ECMS is developed by calculating the total fuel consumption as sum of real fuel consumption by ICE and equivalent fuel consumption of electric motor.This allows a unified representation of both, the energy used in the battery and the ICE fuel consumption.Using this approach, equivalent fuel consumption is calculated on a real-time basis, as a function of the current system measured parameters.No future predictions are necessary and only a few control parameters are required.These parameters may vary from one HEV topology to another as a function of the driving conditions.ECMS can compensate the effect of uncertainties of dynamic programming.The only disadvantage of this strategy is that it does not guarantee charge sustainability of the plant.
Equivalent fuel consumption is calculated based on the assumption that SOC variation in the future is compensated by the engine running at current operating point.Jalil et al. [97] use thermostatic control strategy to turn the engine on/off based on SOC profile but did not yield optimal results.Paganelli et al. [96] implement an ECMS for a hybrid electric sport utility vehicle in charge sustaining mode, to minimize the fuel consumption and pollutant emission.This instantaneous minimization results in reducing the toxic emissions without degrading the fuel economy.Paganelli et al. [98] implement an ECMS for PHEVs, which gives an instantaneous power split strategy in charge sustaining mode.Paganelli et al. [99] implement an ECMS to minimize fuel consumption of HEV by splitting the power between ICE and electric motor.They achieve a reduction in the fuel consumption by 17.5% as compared to ICE based vehicle alone.This result is also verified using global optimization theory as utilized in [38].Supina and Awad [100] suggest turning on/off the engine according to the battery energy level and thus this results in improved fuel efficiency of 1.6% to 5% over the thermostat control.Without the knowledge of future driving conditions to find the real-time control of fuel consumption of parallel HV is presented in [101].It uses ECMS for the instantaneous optimization of the cost function and it depends only upon the current system operation.Won et al. [102] propose an energy management strategy for torque distribution and charge sustenance of HEV using ECMS.In this, a multiobjective torque distribution strategy is formulated first and then it is converted into single objective linear optimization problem.References [103,104] implement a modified ECMS for a series HV configuration with two different energy sources which is a generalization of instantaneous ECMS proposed in [98,99].For real-time energy management, [105,106] propose an adaptive equivalent consumption minimization strategy (A-ECMS).It continuously updates the control parameter according to road load condition and provides a quasi-static solution for supervisory control in comparison to ECMS and rule-based strategy.Salmasi [107] designs a novel control strategy for series HEV, which does not require any model of vehicle device and consumes less computation time.Sciarretta and Guzzella [108] analyze that ECMS is a close optimal solution for PHEV energy management.An ECMS, which is an instantaneous optimization strategy, is implemented in a series city hybrid bus.These buses have different power train configurations like fuel cell and battery or diesel engine and battery [109].Using ECMS, [110,111] present real time implementable control strategy which even in the absence of future driving information supplies optimal results for fuel consumption minimization and toxic emission reduction.Tulpule et al. [112] propose an ECMS, which requires knowledge of total trip distance instead of driving pattern information to improve fuel economy.Marano et al. [113] compared ECMS and DP for the comparison of optimal performance of PHEVs and concluded ECMS as an on-board implementable control strategy.He et al. [114] present an A-ECMS for power-split PHEVs using predictive speed profiles.During the whole journey optimization, window sizes are identified which result in improvement in fuel consumption.The fuel consumption ratio varies with DC chosen and operating modes.Cui et al. [115] develop an energy management strategy which comprises two stages: (1) instantaneous optimization using ECMS and (2) global parameter estimation using DP.Knowledge of distance of the next charging station during travel gives a noteworthy fuel economy and full knowledge of terrain preview gives almost 1% of fuel economy improvement.
(2) Model Predictive Control (MPC).Model predictive control (MPC) is a good method for dynamic model of the process which is obtained by system identification.The main feature of the MPC is to allow current timeslot to be optimized taking future timeslots into account.This is achieved by optimizing a finite time-horizon and implementing the current timeslot only.MPC can anticipate future events and can take control actions accordingly.
Using MPC, West et al. [116] enhance the battery lifetime and vehicle driving range and at the same time reduce the toxic emissions and drive train oscillations for EVs and HEVs.Model based strategy for real-time control of parallel hybrid without knowing future driving conditions is proposed by [101].Real-time implementable energy management strategy of an HEV using MPC is presented in [117,118].
Reference [117] uses mixed integer linear programming to envisage the best control.They state that the predictive optimal control offers superior fuel economy compared to that of instantaneous strategies.In classical model predictive control, at each step an online optimization problem is required to solve.To address this, an MPC with improved speed is implemented by [119].Mahapatra [120] formulates a model based design for HEVs with an idea to reuse this design at various development stages.It also benefits in the form of lower cost and time saving.Kermani et al. [121] implement a Lagrange formula based global optimization algorithm using MPC.An energy management strategy for a series HEV is proposed by [122] using MPC and quadratic programming.Using a quasi-static simulator developed in the MATLAB environment, MPC algorithm is applied.They also investigate the length and type of predictions.Ripaccioli et al. [123] describe a hybrid MPC strategy to coordinate power train subsystem and to enforce state and control constraints.Firstly, authors develop a hybrid dynamical model using linear and piecewise affine identification method and then design an MPC to reduce emissions.Borhan et al. [124] develop a nonlinear MPC for HEVs to solve the powersplit optimization problem online.In the absence of a priori knowledge of driving pattern, [125] presented a stochasticmodel predictive control for power management of series HEV.Power demand from the driver is modelled as a Markov chain.This algorithm optimizes over a distribution of future requested power demand from the current demand at each sample time.Vogal et al. [126] use a predictive model to improve fuel efficiency.The authors utilize a probabilistic driving route prediction system and train it using inverse reinforcement learning.Borhan et al. [127] propose an MPC based minimum fuel consumption strategy for power-split hybrid vehicles.The complex energy management problem is divided into two levels.For the first level (supervisory level) MPC is used to calculate future control sequences that minimize a performance index and then is applied to the first element of the computed control sequence of the hybrid vehicle model.For a parallel HEV, an MPC torque-split strategy is developed [128] considering the effect of the diesel engine transient characteristic.The authors conclude that the MPC based method can improve the fuel economy.For minimization of fuel consumption and to keep the SOC within a specified range, [129] presented an MPC based controller, which works on torque demand predictions estimated from the desired SOC and desired vehicle speed.Cui et al. [115] proposed an online receding controller, which works on the principle of predictive control for parallel HEVs.The energy management strategy based on this predictive control gives the fuel economy of 31.6% compared to rule-based control.This shows the potential of predictive control.The authors conclude that predictive control strategies utilize battery power more effectively and hence give better fuel efficiency and reduced emissions compared to the rule-based.
(3) Neural Networks.McCulloch and Pitts in 1943 firstly designed the neural network and Hebb in 1949 developed the first learning rule.Artificial neural network (ANN) is a network of artificial neurons and is a parallel computation technique consisting of many processing blocks connected together in a specific way to perform a specific task.ANN is a powerful computational method which learns and generalizes from training data.This uses the principle of function approximation.The output of a neuron is a function of the weighted sum of the inputs and a bias.The function of the entire neural network is simply the computation of the outputs of all the neurons.NN's adaptive structure makes it suitable for any control applications.A well designed network can get fit to any lookup table and can adapt itself by training to update the table data.This feature makes it better than rule-based controllers.Recurrent NNs are networked with dynamic feedback which means they can also be modelled as dynamic controller.NN is an effective approach for pattern recognition and function fitting.
Baumann et al. [130] used ANN and fuzzy logic for implementing a load leveling strategy and implemented a supervisory controller, which takes care of fuel economy and reduced emissions in case of different drivers and driving pattern.For analysis and control of power split in a parallel HEV, Arsie et al. [131] modelled a dynamic system with vehicle-driver interaction, ICE, and electric motor/generator.Using this, vehicle load estimation is performed using NN to optimize the supervisory control strategy for the optimized performance of the vehicle.Mohebbi et al. [132] presented a neurofuzzy controller, which is implemented using ANFIS method.This controller is designed based on (1) torque required for driving and (2) battery SOC; and it maximizes the driving torque and minimizes the fuel consumption.Prokhorov [133] proposed NN controller for Toyota Prius HEV based on recurrent NN using online and offline training, including extended Kalman filtering and simultaneous perturbation stochastic approximation.Author claimed better results by combining online and offline methods.For the nonlinear control system, Liu [134] implemented a high accuracy fuzzy neural network (FNN) controller.The membership function of FNN is optimized using modified genetic algorithm and error-compensation method and results are found better than the normal FLC.Suzuki et al. [135] designed a hybrid controller for HEVs to optimize torque distribution, liquid fuel, and electric current consumption during vehicle propulsion using NN with online simulation.Gong et al. [136] derived a NN based improved trip model for driving pattern of PHEVs; hence an increased fuel economy is achieved.In lack of a priori information about driving pattern, a real-time controller using neurodynamic programming is proposed by [137] which gives optimal power split for parallel hybrid electric light commercial vehicle.Murphey et al. [138] used NN to predict road and traffic conditions optimal power split in HEVs.The authors first developed a machinelearning framework for energy optimization in an HEV; then they present three online intelligent energy controllers: (1) IEC HEV SISE; (2) IEC HEV MISE; and (3) IEC HEV MIME.The three online controllers were integrated into the Ford Escape hybrid vehicle model for online performance evaluation.All three online intelligent energy controllers were trained within the machine-learning framework to generate the best combination of engine power and battery power to minimise the total fuel consumption.The performance of IEC HEV MISE controller was found best and led to fuel savings ranging from 5% to 19% as compared to default Ford Escape controller.
(4) Particle Swarm Optimization.Particle swarm optimization (PSO) is a faster, inexpensive, robust stochastic global optimization technique developed by Eberhart and Kennedy in 1995.This technique is used for continuous nonlinear function and was developed based on the swarm in nature as bird [139,140].PSO is a heuristic evolutionary search algorithm which is an iterative optimization method using particles (population of candidate solutions) and moving these particles around in the search space according to a mathematical formula over the particle's position and velocity.In PSO, particles move around a search space and are guided by best known positions in the search space as well as entire swarm's best known position.When improved positions are discovered, these will guide the movements of the swarm particles.The process is repeated but does not guarantee the satisfactory solution.
PSO is a metaheuristic approach as it makes few or no assumptions about the problem being optimized and can search very large spaces of candidate solutions.However, metaheuristics such as PSO do not guarantee an optimal solution.More specifically, PSO does not use the gradient of the problem being optimized, which means PSO does not require the optimization problem to be differentiable as is required by classical optimization methods, such as gradient descent and quasi-Newton methods.PSO can therefore also be used on optimization problems that are partially irregular and noisy, change over time, and so forth.
The multilevel hierarchical control strategy optimized by the improved PSO algorithm can properly determine the direction and quantity of the energy flow in the HEVs/PHEVs and make the main power train components operate at high efficiency so that the fuel consumption can be reduced.
For parallel HEV, a multilevel hierarchical control strategy is proposed by [141,142] using MATLAB/Simulink/ Stateflow and optimized using PSO to get an optimal energy flow between engine and electric motor.Wang et al. [143] proposed a power control strategy to optimize fuel consumption and emissions in HEVs using PSO and it is compared with DIRECT algorithm.By simulating these strategies for several DCs, PSO is found to be better than DIRECT.Wu et al. [144] implemented an FLC for energy management system.Membership function and the rules of FLC are optimized by using PSO to find improved fuel economy and decreased emissions in HEVs.For a charge sustaining operation this strategy gives better fuel efficiency.Al-Aawar et al. [145] combined PSO and electromagnetic-team fuzzy logic (EM-TFL) together for the design optimization of the HEV power train system to find best electromechanical component sizes for higher efficiency and reduced fuel consumption.Desai and Williamson [146] optimized both power train and control strategy (objective function and constrained function) parameters using PSO for improved fuel economy and efficiency and reduced emissions.Hegazy and Van Mierlo [147] conclude that PSO consumes less time than GA to obtain a solution and is easier to implement.Varesi and Radan [148] used PSO to find the optimal degree of hybridization in series-parallel HEV using advance vehicle simulator (ADVI-SOR) to optimize the vehicle performance with reduced fuel consumption and emissions.To optimize the various components of HEV, EM-TFL with PSO has been used by [149] in the form of a case study which concludes that a smaller size engine, electric motor performance, is optimized and fuel economy is improved by 22% and reduction in toxic emissions is noticed.Junhong [150] proposed PSO for energy optimization in PHEVs using MATLAB/Simulink and showed an improvement in fuel economy and reduction in pollutant emissions.Su and Chow [151] optimized the capacity of a parking lot with five hundred PHEVs with objective function as "average SOC" and constraints as "remaining SOC, " "remaining charge time, " and "energy prices." Wu et al. [152] optimized the component size and control strategy simultaneously in parallel HEVs.This proposed a self-adaptive PSO algorithm and uses applied fuzzy set theory to extract the best suitable solutions.
(5) Pontryagin's Minimum Principle.Pontryagin's minimum principle (PMP), formulated in 1956 by the Russian mathematician Lev Semenovich, gives the best possible control to take a dynamical system from one state to another state in the presence of constraints for some state or input control.PMP is a special case of Euler-Lagrange equation of calculus of variations.For an optimum solution, PMP provides only necessary conditions and the sufficient conditions are satisfied by Hamilton-Jacobi-Bellman equation.In PMP, the number of nonlinear second-order differential equations linearly increases with the dimension so the control based on PMP takes less computational time for getting an optimal trajectory but it could be a local optimal, not a global solution.Under certain assumptions optimal trajectory obtained by PMP should be considered as a global optimal trajectory.These are as follows: (1) trajectory obtained from PMP is unique and satisfies the necessary and boundary conditions, (2) some geometrical properties of the optimal field provide the possibility of optimality clarification, and (3) as a general statement of the second approach, the absolute optimality is, mathematically, proven by clear proposition [153].
Geering [154] explains PMP to reduce a global energy optimization problem into a local optimization problem.Serrao and Rizzoni [155] implement an optimal control strategy using PMP to get an optimal solution.They have converted global optimization problem into an instantaneous optimization problem.Kim et al. [156] applied PMP to find the optimal control law for PHEVs using instantaneous optimization.The available literature concludes that by proper selection of state constraints instantaneous optimization strategy results in near optimal solution as given by DP.A real-time controller can be obtained as this technique becomes very simple after selection of the state constraint.Stockar et al. [157] used PMP to build an optimal supervisory controller by reducing a global optimization problem into local.The advantage of this is that it reduces computational requirement and gives the freedom to solve the problem in the continuous time domain.Stockar et al. [158] proposed a model based control strategy to minimize the CO 2 emission.A supervisory energy management strategy is implemented as a global optimization problem and then converted into local and using PMP, optimal energy utilization for PHEVs is obtained.For real-time implementation of an energy management strategy, the tools used by [159] consist of PMP based offline optimizer which results in ECMS and is implementable in real-time environment.A real-time optimal control can be obtained using PMP as it uses instantaneous minimization of the Hamiltonian function.Kim et al. [160] state that solution based on PMP can be a global optimal under some certain assumptions.Kim et al. [161] applied PMP based control strategies to the PHEVs and found that it gives a number of alternative solutions.They concluded the blended mode control results as the best strategy in term of battery usage and provide a near global optimal solution as can be obtained by DP.Kim et al. [162] find that PMP provides a near-optimal solution for optimal power management of HEVs if future driving conditions are known.It is suggested to find proper costate to keep SOC at a desired and predefined level.
As the trajectory derived from PMP might not be a global optimal solution, therefore, the control based on PMP can be considered as inferior to the DP.DP requires more computing time than PMP because DP solves all possible optimal controls to fill the optimal field.Since DP is a numerical representation of the HJB equation, it needs a similar computation load as the Hamilton-Jacobi-Bellman equation, which solves a partial differential equation.PMP solves just nonlinear second-order differential equations.The drawback of DP with regard to the computational load becomes compounded due to the "curse of dimensionality."

Other Power Management Strategies
Power management methodology with CVT for HEVs is implemented to optimize the power [102,163,164].Won et al. [102] give a power management strategy for charge sustenance mode and torque distribution in HEV.Ceraolo et al. [165] provide an energy flux based optimal energy consumption approach which helps out in solving the problems occurring at design stage.Khayyam et al. [166] provide an intelligent energy management model which considers the impact of rolling, drag, slope, and accessory loads.Under various driving conditions this model minimizes the fuel consumption.Amjad et al. [167] designed a microprocessor based energy management strategy for the optimal power split.Ji et al. [168] proposed a real-time energy management strategy for a CVT based parallel HEV to avoid charging of the battery directly through the engine.The energy recuperated during regenerative braking is distributed to achieve a dynamic converging characteristic.A charge blended energy management strategy named as equivalent fuel consumption method (EFCM) for PHEVs is presented by [169].EFCM controller is associated with a proportion plus integral (PI) controller.For any type of drive cycle or any size of the battery, PI controller outputs time varying charge sustaining penalty function which controls battery SOC.Reference [170] suggested robust multivariable control systems better than existing torque management strategies.The proposed controller works on dynamic models of plant and considers the drivability requirements.It is also capable of posing the significant robustness in the presence of any type of uncertainties like change in dynamics of plant and nonavailability of vehicle load torque.Shahi et al. [171] proposed an approach for optimal PHEV hybridization using Pareto set pursuing (PSP) multiobjective optimization algorithm.The main feature of this algorithm is that it uses very less time (17 days) compared to exhaustive search approach (560 days) for PHEV 20 on urban dynamometer driving schedule (UDDS).Moreover the authors conclude that optimal hybridization scheme (battery, motor, and engine should work collectively for optimum performance) varies with DCs and AERs and strongly affects the fuel efficiency.

Conclusion and Future Direction
As HEVs are gaining more popularity, the role of the energy management system in the hybrid drive train is escalating.
A thorough description and comparison of all the control strategies to optimize the power split between the primary and secondary sources of HEVs/PHEVs used are given here.Evolution of control strategies from thermostat to advanced intelligent methods is included in the study.Rule-based controllers are easily implementable, but the resultant operation may be quite far from optimal; that is, the power consumption is not optimized for the whole trip.In order to achieve the global optimality a priori information of trip is required.Although real-time energy management is not directly possible using optimization-based methods, an instantaneous cost function based strategy may result in real-time optimization.The strategies discussed in this paper are real-time implementable and are robust in nature.Table 1 is the concluding table and serves as a guide to choose the correct method of optimization.It is suggested that strategies should take less computational time, provide global optimal results, and get fit to the dynamic simulation environment.
To obtain reduced liquid fuel consumption and larger electric operating range without compromising with the speed and performance of vehicle, a new technology, that is, a PHEV, is in practice globally.PHEVs' charge depletion mode of operation is desirable, but a blended mode of operation may be a promising solution to extend operating electric range.The control strategies suggested so far are required to be explored more in context of operating specifications and their true potential for PHEVs.

Table 1 :
Comparison chart for various control strategies.= global, L = local, N = no, Y = yes, M = more, and S = small. G