Advances in Bioinformatics
Volume 2015 (2015), Article ID 843030, 7 pages
http://dx.doi.org/10.1155/2015/843030

Research Article

Development of a Machine Learning Method to Predict Membrane Protein-Ligand Binding Residues Using Basic Sequence Information

M. Xavier Suresh,¹ M. Michael Gromiha,² and Makiko Suwa³

¹Department of Bioinformatics, Sathyabama University, Chennai 600119, India
²Department of Biotechnology, IIT Madras, Chennai 600032, India
³Computational Biology Research Center (CBRC), National Institute of Advanced Industrial Science and Technology (AIST), Tokyo 135-0064, Japan

Received 28 June 2014; Revised 7 January 2015; Accepted 8 January 2015

Academic Editor: Paul Harrison

Copyright © 2015 M. Xavier Suresh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

Locating ligand binding sites and finding the functionally important residues from protein sequences as well as structures became one of the challenges in understanding their function. Hence a Naïve Bayes classifier has been trained to predict whether a given amino acid residue in membrane protein sequence is a ligand binding residue or not using only sequence based information. The input to the classifier consists of the features of the target residue and two sequence neighbors on each side of the target residue. The classifier is trained and evaluated on a nonredundant set of 42 sequences (chains with at least one transmembrane domain) from 31 alpha-helical membrane proteins. The classifier achieves an overall accuracy of 70.7% with 72.5% specificity and 61.1% sensitivity in identifying ligand binding residues from sequence. The classifier performs better when the sequence is encoded by psi-blast generated PSSM profiles. Assessment of the predictions in the context of three-dimensional structures of proteins reveals the effectiveness of this method in identifying ligand binding sites from sequence information. In 83.3% (35 out of 42) of the proteins, the classifier identifies the ligand binding sites by correctly recognizing more than half of the binding residues. This will be useful to protein engineers in exploiting potential residues for functional assessment.

1. Introduction

Membrane proteins are an important class of molecules which play key roles in various biologically important functions such as the maintenance of ionic and proton balance, transport of substrates, ions, energy, and information across the membrane, light harvesting, photosynthesis, and other biological processes [1]. Membrane proteins are classified mainly into two types: (i) formed by bundles of apolar transmembrane -helices (TMH) and (ii) -barrels (TMS). It has been estimated that nearly 45% of the drugs on the market target membrane protein receptors [2]. Advancement of high throughput technologies enable the whole genome sequencing of a number of organisms. It has been estimated that, in many genomes, TM proteins comprise 20–35% of all proteins [3, 4] and hence significant progress has been made in recent years in the determination of the structures of membrane proteins. Attempts have been made to determine the complete structures or domains of membrane proteins by crystallographic and solution or solid-state NMR spectroscopy methods [5, 6]. This in turn increases the entries significantly in various structural databases.

The vast majority of signal transduction events begin with the interactions of extracellular signaling molecules (ligands) to their respective membrane-bound receptors. However, identifying functional residues in proteins is a complex issue, even when atomic detailed structures are available [7]. Various approaches are evolved to study the functional residues [8, 9]. Zhang and Grigorov, 2006, studied a hierarchically organized structural relationship among protein binding sites using similarity networks [10]. Further the prediction of function from sequence and structural data has been extensively reviewed by Watson et al. [11]. These studies showed that almost all the functions of membrane proteins are mediated by interactions, which have a pivotal role in biological processes essential to life, and hence understanding protein-ligand interactions is of prime importance. Traditionally protein-ligand interactions are studied through laboratory experiments, which are often time consuming and costly [12, 13]. Accordingly computational methods have evolved and become increasingly dominant in understanding protein-ligand interactions.

Protein-ligand interactions have been extensively studied in recent years for various reasons [14–18] such as carbohydrate recognition, drug interaction, and DNA binding. Moreover, the prediction of ligand binding sites is an essential part of the drug discovery process. Knowing the location of binding sites greatly facilitates the search for hits, the lead optimization process, the design of site-directed mutagenesis experiments, and the hunt for structural features that influence the selectivity of binding in order to minimize the drug's adverse effects. Several reports throw light on the prediction as well as design of ligands and ligand binding sites [19–21] using amino acid residue features and various algorithms of machine learning [22–28]. Recently Xie and Hwang, 2015, reviewed the underlying concepts of the methods used by various tools for predicting protein-ligand binding sites [29]. Prediction of protein functional residues using sequence conservation and multiple sequence alignments have also been reported [30–32]. However, our understanding about the interaction of ligands with membrane proteins is very limited when compared to the other class of proteins known as globular proteins.

The recent explosion in the availability of complete genome sequences has led to the cataloging of tens of thousands of new proteins and putative proteins. Previous research focused mainly on prediction of membrane proteins and their types [33–36]. Due to the absence of intricacies of structural information the problem of ligand binding prediction in membrane proteins is ignored for a long time; however, the growth of the databases and construction of well-defined dataset paved ways to this study. Hence, in this work, we started from analyzing a set of nonredundant membrane protein-ligand complexes and derived several important sequence descriptors and trained a Naïve Bayes classifier. Bayesian classifiers are probabilistic models, based on Bayesian theorem, robust to real data noise and missing values [37]. The Naïve Bayes classifier is one of the most effective and efficient classification algorithms in the literature [38] showing good performance. With the help of the machine learning technique we tried to predict the ligand binding residues in membrane proteins from sequence information alone.

2. Materials and Methods

2.1. Data Sets

A data set of ligand-binding membrane proteins was extracted from structures of known membrane protein-ligand complexes in the Protein Data Bank [39]. The dataset was culled using the list of membrane proteins obtained from PDBTM [40], TMPDB [41], MPDB [42], and a large collection of membrane protein structures [43]. The resulting dataset consists of 31 membrane proteins from which 42 sequences (nonhomologous chains are taken into account) were considered in the present study with mutual sequence identity 30% using BLASTCLUST program from NCBI and each protein has at least 50 amino acid residues. All the structures have resolution better than 3.0 Å and R factor less than 0.3.

2.2. Ligand Information

Several reports in the literature used all nonprotein and nonwater molecules as ligands [44]. In this study, ligand is considered as a molecule that binds with the proteins that have structural and/or functional role and will be present within a cut-off distance of 4.5 Å from any of the protein atoms.

2.3. Definition of Ligand Binding Residues

Any of the atoms of the ligand is in contact with the any of the atoms of a particular residue, which is said to be in binding if the distance between them is lower than the cut-off value 4.5 Å. This definition has also been used in our previous studies. The 42 proteins sequences (chains with at least one transmembrane domain from 31 membrane proteins) in the dataset consist of 10657 residues in total and 1431 of them (13.43%) are identified as ligand binding residues.

2.4. Description of Naïve Bayes Classifier

We used the Naïve Bayes implementation in the Weka package from the University of Waikato, New Zealand [45, 46], for predicting the ligand binding residues in membrane proteins. For each input target residue, the classifier produces a Boolean output (with 1 denoting a binding residue and 0 denoting a nonbinding residue). The Naïve Bayes classifier assumes independence of the attributes given the class. For an input , a Naïve Bayes classifier assigns it a class label by optimizing the posterior:

In the case of two-class classification (), this is equivalent to determining by comparing the ratio likelihood with a parameter as in

is predicted to be 1 if the ratio likelihood is greater than , and 0 otherwise. takes the value of 1. When a target residue and its neighbors were encoded using numeric features such as binding propensity and hydrophobicity, the numerical values were normalized using the normalization filter of Weka. We used leave-one-protein-out cross-validation to validate the classifier. In each round of experiment, all proteins except one were used as the training set and the remaining protein was used to test the classifier.

2.5. Naïve Bayes Classifier Using Sequence Based Parameters as Input

The input to the Naïve Bayes classifier contains the identities of residues in the form of , where is the property of target residue and and are the identities of residues on each side of the target residue. Different values of from 1 to 7 were tried and the best performance was obtained when (corresponding to a window size of 5). A training example is an ordered pair , where . 1 indicates that the target residue (the residue in the center of the input window) is a binding residue and 0 indicates that target residue is not a binding residue. For a test example , the classifier outputs 1 (i.e., is predicted to be a binding residue) or 0 (i.e., is predicted to be a nonbinding residue) as the class label of .

2.6. Naïve Bayes Classifier Using PSSM Profiles as Inputs

In the present study, a reference database with known nonredundant membrane protein sequences constructed separately was used for the purpose of generating PSSM profiles. We set parameters of PSI-BLAST [47] using BLOSUM62 substitution matrix, three iteration runs, and exception value 0.001. The other parameters are set using default values. The PSI-BLAST program by querying each protein chain against the nonredundant database is used to generate PSSM profiles which are in the form of matrix, where is the total number of amino acid residues in the queried protein sequence. Let the residue be represented by where . Each query residue is represented by a vector of 20 attributes. The input pattern to the Naïve Bayes classifier using the PSSM profile features for the residue is where is the number of neighborhood residues on either side. We construct a matrix with window size centered on the target residue . The used profile is the form of a matrix. These profiles are normalized into the range (0, 1) using the normalization option of Weka. Another set of attributes was also generated in such a way that it utilizes the values of BLOSUM62 matrix as features.

2.7. Performance Measures

We utilized the following parameters to evaluate the performance of our prediction method because no single performance measure provides a complete picture of performance of the classifier: accuracy, correlation coefficient (MCC), specificity, and sensitivity. These measures are defined as

where TP is the number of true positives (residues predicted to be binding residues that are in fact binding residues); FP is the number of false positives (residues predicted to be binding residues that are in fact not binding residues); TN is the number of true negatives (residues predicted to be nonligand binding residues that are in fact not ligand binding residues); FN is the number of false negatives (residues predicted to be nonligand binding residues that are in fact ligand binding residues); is the total number of residues (TP + TN + FP + FN).

3. Results and Discussion

In this work, we trained a Naïve Bayes classifier to predict whether a given amino acid residue in a membrane protein sequence is ligand binding or not based on its sequence information. The Naïve Bayes classifier algorithm as implemented in Weka, a machine learning package, is adopted. The Naïve Bayes classifier is adopted for several reasons. The prime advantage of the Bayesian classifiers is that they are probabilistic models, based on Bayesian theorem, robust to real data noise and missing values [37]. The Naïve Bayes classifier assumes independence of the attributes used in classification but it has been tested on several artificial and real datasets, showing good performance even when strong attribute dependence is present. It is one of the most effective and efficient classification algorithms in the literature and is simple to implement and use [38].

3.1. Prediction Results

We used a dataset of 42 nonredundant transmembrane protein sequences (chains with at least one transmembrane domain from 31 membrane proteins) to train the Naïve Bayes classifier. Three methods were used to encode the protein sequence. They are amino acid properties, BLOSUM62 and PSSM profiles based encodings. In the sequence based method 48 important amino acid properties (for more details see [48, 49]) such as hydrophobicity, polarity, molecular weight, and charge, are used as features to encode the protein sequence. It will be noted that some of the parameters are related. In addition it may be advisable to keep a larger input in order to avoid losing useful parameters. And hence we used all the parameters. The best prediction performance measures were obtained for a window size of 5 (), keeping the central residue as the target residue. The overall prediction accuracy obtained by this method was 64% and the other prediction measures are shown in Table 1.

Table 1: The prediction performance of the Naïve Bayes classifier using different encodings of sequence.

Number
Type of encoding
Accuracy
Sensitivity
Specificity

(1)
Sequence
63.8%
60.5%
64.4%

(2)
Blosum62
67.9%
59.0%
69.4%

(3)
PSSM
70.7%
61.1%
72.2%

BLOSUM matrices are based on observed alignments. Though BLOSUM62 is tailored for comparisons of moderately distant proteins, it has been used in detecting closer relationships between proteins since they best represent the physiochemical characteristics of the amino acid substitutions. And hence we used this as a feature set for training the classifier. The prediction performance of classifier trained using BLOSUM62 elements as input was relatively better than that of the sequence based classifier. The performance measures are shown in Table 1.

Further we have incorporated the evolutionary information in the form of PSSM profiles based encoding. Position specific iterative BLAST (PSI BLAST) is a strong measure of residue conservation in a given location. When a residue is important for biological function it is conserved through cycles of PSI BLAST. The performance measures of the PSSM profiles based classifier are given in Table 1. Interestingly, the prediction accuracy (71%) is higher than the other two classifiers trained with the same dataset. The large predictive power of the evolutionary information as measured in this work may be due to the reason that residue conservation in protein families is directly related to its contribution to protein stability or function. It has been established by several researchers that the prediction of structural properties is significantly enhanced by the use of PSSM profiles compared to predictions based on unique representations of amino acid sequence and its environment. In addition the ligand binding in membrane proteins is largely influenced by their particular structural architecture.

We analyzed the predicted binding residues by the highest performance classifier to understand the reliability of the method. Interestingly, in 83.3% (35 out of 42) of the proteins, the classifier identifies the ligand binding sites by correctly recognizing more than half of the binding residues. In more than 90% of the proteins, the classifier correctly identifies at least 20% of the binding residues suggesting the possibility of using such classifiers to identify potential ligand-binding membrane proteins. The per protein prediction accuracy is given in Table 2. Moreover, those nonbinding residues predicted as binding residues will be in contact if we just increase the cutoff distance about 6–8 Å. Most of the false positive residues are either sequence neighbors or structural neighbors that can influence ligand binding.

Table 2: Per protein prediction accuracy.

Pdb ID
Number of residues
Sensitivity
Specificity
Accuracy

1ar1_b
252
50
83.2
79.44

1be3_e
196
80
89.6
89.06

1ds8_h
246
40
91.6
90.50

1ds8_l
281
54.8
65.2
62.45

1ehk_a
544
43.5
71
66.30

1ehk_b
166
30
77
74.07

1eys_m
318
52.6
75.5
67.20

1f88_a
338
25.5
55.9
50.90

1fx8_a
254
29.5
68
61.2

1iwo_a
994
10
82.3
80.81

1j4n_a
249
50
68.2
67.34

1j95_a
98
60
62.9
62.77

1kb9_c
385
66.7
79.4
74.80

1kb9_h
93
20
73.8
70.78

1kb9_i
55
100
38.6
47.06

1kf6_c
130
100
19.8
23.02

1kf6_d
119
36.8
62.5
58.26

1kpl_a
430
23.8
72.8
70.43

1kqf_b
289
47.8
88.4
78.60

1lgh_a
56
79.4
16.7
57.69

1lnq_a
301
0
79.8
78.45

1m0k_a
222
59.5
68.3
65.13

1m56_a
547
50.4
69.1
65.19

1m56_b
260
33.3
79.9
77.73

1nek_c
129
92.3
27.9
48

1nek_d
113
92.6
3.7
25.69

1okc_a
292
27.5
88.5
71.53

1oy9_a
1006
100
84
84.03

1p49_a
549
44.4
73.1
70.11

1p7b_a
258
60
76.7
76.38

1ppj_g
75
14.3
64.9
54.93

1pv7_a
417
37.5
65.7
65.13

1q16_c
224
57.1
42.9
38.89

1q90_a
292
35.1
89.6
82.64

1q90_b
212
50
78.3
66.35

1qle_c
273
35.5
65.5
62.08

1rc2_b
231
40
63.2
61.67

1v54_d
144
84.2
42.1
47.86

1v54_g
84
60
20
40

1v54_j
58
30
81.8
72.22

1vf5_b
138
42.4
83.2
73.13

1vf5_d
168
61.1
82.9
80.49

Average

50.18
66.04
65.25

3.2. ROC Curve

The receiver operating characteristic curve (ROC curve) is a plot of the “sensitivity” (TP/(TP + FN)) versus the “1-specificity” (FP/(TN + FP)) [50]. It shows the tradeoff between true positive rate and false positive rate when different threshold values are used for the classifier. Figure 1 shows such a plot for the predictor with sequence, BLOSUM62, and PSSM profiles based encoding obtained using Weka. It could be noted from the figure that there is slight improvement while using PSSM profiles as the input features for the classifier.

Figure 1: Showing ROC plots of classifiers trained with sequence (thin), BLOSUM62 (grey), and PSSM (dark) based encoding of the amino acid sequence of membrane proteins.

3.3. Comparison with Other Algorithms

Though several methods address the issue of protein-ligand interactions [22–27, 30–32], the method reported here is particularly for membrane proteins. Since the features derived are from the dataset of membrane protein sequences, its performance is very poor for globular proteins. However, for comparison of performance, few other algorithms implemented in Weka, for example, SMO, RBF network, Multilayer perceptron, IBk, ADTree, and J48, were also tested with the same data set, among which the analysis shows that the cross-validation sensitivity and net prediction accuracy are good for the current Naïve Bayes classifier (Table 3). Sequence based methods employing only sequence information presented in this work are new and will have a much wider application as no structure information will be required for prediction. We expect that this will trigger interest in the prediction of ligand binding sites in membrane proteins using machine learning methods and the performance will improve with the availability of more data.

Table 3: The prediction performance of different machine learning algorithms.

Algorithm
Accuracy
%
Sensitivity
%
Specificity
%
Net prediction
%

Naïve Bayes
70.9
59.5
72.2
65.9

SMO
86.5
0
100
50

RBF network
86.5
0
100
50

Multilayer perceptron
84.6
29.6
93.1
61.4

IBk
83.3
31.3
91.4
61.4

ADTree
86.6
4.5
99.3
51.9

J48
87.4
28.1
93.5
60.8

3.4. WEB Based Tool

With the optimized parameters during cross-validation the current PSSM profiles based Naïve Bayes predictor has also been implemented as a web based tool which will be freely accessed from following url: http://tmbeta-genome.cbrc.jp/tm-lig/tm-lig.html. The only input to this predictor is the membrane protein sequence. The web server will automatically generate PSSMs of the given sequence against a reference data and use them as the input to the Naïve Bayes classifier trained for predictions of 42 membrane proteins. It requires less than a minute. The results presented include the raw probability scores and annotation of the residues whether ligand binding or not.

3.5. Identification of Binding Residues in Cytochrome BD Oxidase

We used the trained classifier to identify the binding residues for an unknown membrane protein sequence randomly selected from swissprot, a sequence database. The protein is cytochrome bd oxidase from E. coli, important for anaerobic oxidation [51]; its structure has not yet been determined. The predicted results were compared with the functional information available from the literature [51–54]. Interestingly, 50% of the residues predicted to be ligand binding are involved in interaction. In addition, few of the predicted residues belong to the segments which were experimentally determined to be functionally important [52]. Since the structure of this protein has not been determined, a homology model has been built (data not shown) and comparative analysis of binding sites with the related structures revealed that nearly 80% of the predicted residues are found to be along the lining of the proposed binding sites. This indeed increases the confidence level of using this predictor prior to planning for any mutagenesis or any functional assessment related experiment with more confidence rather than a random start.

4. Conclusion

Using a well constructed dataset, a Naïve Bayes predictor is trained and tested to predict the ligand binding residues in membrane proteins from amino acid sequence. Several encodings were used to test the performance of the predictor and PSSM profiles based predictor was shown to have better prediction accuracy (71%). With the level of success achieved in this study, putative ligand-binding sites predicted by the classifiers trained using a machine learning approach should be useful for guiding experimental investigations into the role of specific residues of a protein in its interaction with ligand, for example, by localizing candidate residues for mutagenesis. This paves ways for further improvements and predictions based on sequence methods for membrane protein-ligand interactions. Currently, we are investigating other machine learning classification methods to improve the accuracy of the prediction, which warrants further exploration.

Conflict of Interests

The authors declare that they have no conflict of interests related to this paper.

Acknowledgments

The computational facilities at CBRC and the financial assistance from JSPS are gratefully acknowledged. The authors thank the anonymous reviewers for their valuable suggestions.

References

K. G. Fleming, “Riding the wave: structural and energetic principles of helical membrane proteins,” Current Opinion in Biotechnology, vol. 11, no. 1, pp. 67–71, 2000.

J. Drews, “Drug discovery: a historical perspective,” Science, vol. 287, no. 5460, pp. 1960–1964, 2000.

E. Wallin and G. von Heijne, “Genome-wide analysis of integral membrane proteins from eubacterial, archaean, and eukaryotic organisms,” Protein Science, vol. 7, no. 4, pp. 1029–1038, 1998.

T. J. Stevens and I. T. Arkin, “Do more complex organisms have a greater proportion of membrane proteins in their genomes?” Proteins: Structure, Function, and Genetics, vol. 39, no. 4, pp. 417–420, 2000.

S. J. Opella, A. Nevzorov, M. F. Mesleh, and F. M. Marassi, “Structure determination of membrane proteins by NMR spectroscopy,” Biochemistry and Cell Biology, vol. 80, no. 5, pp. 597–604, 2002.

Y. Kyogoku, Y. Fujiyoshi, I. Shimada et al., “Structural genomics of membrane proteins,” Accounts of Chemical Research, vol. 36, no. 3, pp. 199–206, 2003.

S. Jones and J. M. Thornton, “Searching for functional sites in protein structures,” Current Opinion in Chemical Biology, vol. 8, no. 1, pp. 3–7, 2004.

S. Folkertsma, P. van Noort, J. van Durme et al., “A family-based approach reveals the function of residues in the nuclear receptor ligand-binding domain,” Journal of Molecular Biology, vol. 341, no. 2, pp. 321–335, 2004.

I. D. Pogozheva, M. J. Przydzial, and H. I. Mosberg, “Homology modeling of opioid receptor-ligand complexes using experimental constraints,” The AAPS Journal, vol. 7, no. 2, pp. E434–E448, 2005.

Z. Zhang and M. G. Grigorov, “Similarity networks of protein binding sites,” Proteins: Structure, Function, and Bioinformatics, vol. 62, no. 2, pp. 470–478, 2006.

J. D. Watson, R. A. Laskowski, and J. M. Thornton, “Predicting protein function from sequence and structural data,” Current Opinion in Structural Biology, vol. 15, no. 3, pp. 275–284, 2005.

R. A. Palmer and H. Niwa, “X-ray crystallographic studies of protein-ligand interactions,” Biochemical Society Transactions, vol. 31, no. 5, pp. 973–979, 2003.

J. Clarkson and I. D. Campbell, “Studies of protein-ligand interactions by NMR,” Biochemical Society Transactions, vol. 31, no. 5, pp. 1006–1009, 2003.

T. Simonson, G. Archontis, and M. Karplus, “Free energy simulations come of age: protein-ligand recognition,” Accounts of Chemical Research, vol. 35, no. 6, pp. 430–437, 2002.

H. J. Hinz, “Thermodynamics of protein-ligand interactions: calorimetric approaches,” Annual Review of Biophysics and Bioengineering, vol. 12, pp. 285–317, 1983.

R. Perozzo, G. Folkers, and L. Scapozza, “Thermodynamics of protein-ligand interactions: history, presence, and future aspects,” Journal of Receptors and Signal Transduction, vol. 24, no. 1-2, pp. 1–52, 2004.

L. Y. Lian, I. L. Barsukov, M. J. Sutcliffe, K. H. Sze, and G. C. K. Roberts, “Protein-ligand interactions: exchange processes and determination of ligand conformation and protein-ligand contacts,” Methods in Enzymology, vol. 239, pp. 657–700, 1994.

M. Hendlich, A. Bergner, J. Günther, and G. Klebe, “Relibase: design and development of a database for comprehensive analysis of protein-ligand interactions,” Journal of Molecular Biology, vol. 326, no. 2, pp. 607–620, 2003.

C. Taroni, S. Jones, and J. M. Thornton, “Analysis and prediction of carbohydrate binding sites,” Protein Engineering, vol. 13, no. 2, pp. 89–98, 2000.

M. J. J. M. Zvelebil and M. J. E. Sternberg, “Analysis and prediction of the location of catalytic residues in enzymes,” Protein Engineering Design & Selection, vol. 2, no. 2, pp. 127–138, 1988.

G. J. Bartlett, C. T. Porter, N. Borkakoti, and J. M. Thornton, “Analysis of catalytic residues in enzyme active sites,” Journal of Molecular Biology, vol. 324, no. 1, pp. 105–121, 2002.

G. Mirceva and A. Kulakov, “Improvement of protein binding sites prediction by selecting amino acid residues’ features,” Journal of Structural Biology, vol. 189, no. 1, pp. 9–19, 2015.

P. Chen, J. Z. Huang, and X. Gao, “LigandRFs: random forest ensemble to identify ligand-binding residues from sequence information alone,” BMC Bioinformatics, vol. 15, supplement 15, p. S4, 2014.

C. Yan and Y. Wang, “A graph kernel method for DNA-binding site prediction,” BMC Systems Biology, vol. 8, supplement 4, article S10, 2014.

Y.-F. Liou, P. Charoenkwan, Y. Srinivasulu et al., “SCMHBP: prediction and analysis of heme binding proteins using propensity scores of dipeptides,” BMC Bioinformatics, vol. 15, supplement 16, article S4, 2014.

S. C. Izidoro, R. C. de Melo-Minardi, and G. L. Pappa, “GASS: identifying enzyme active sites with genetic algorithms,” Bioinformatics, 2014.

B. Liu, B. Liu, F. Liu, and X. Wang, “Protein Binding Site Prediction by Combining Hidden Markov Support Vector Machine and Profile-Based Propensities,” The Scientific World Journal, vol. 2014, Article ID 464093, 6 pages, 2014.

B. Park, J. Im, N. Tuvshinjargal, W. Lee, and K. Han, “Sequence-based prediction of protein-binding sites in DNA: comparative study of two SVM models,” Computer Methods and Programs in Biomedicine, vol. 117, no. 2, pp. 158–167, 2014.

Z.-R. Xie and M.-J. Hwang, “Methods for predicting protein—ligand binding sites,” in Molecular Modeling of Proteins, vol. 1215 of Methods in Molecular Biology, pp. 383–398, Springer, New York, NY, USA, 2015.

J. A. Capra and M. Singh, “Predicting functionally important residues from sequence conservation,” Bioinformatics, vol. 23, no. 15, pp. 1875–1882, 2007.

J. D. Fischer, C. E. Mayer, and J. Söding, “Prediction of protein functional residues from sequence by probability density estimation,” Bioinformatics, vol. 24, no. 5, pp. 613–620, 2008.

J.-O. Janda, M. Busch, F. Kück, M. Porfenenko, and R. Merkl, “CLIPS-1D: analysis of multiple sequence alignments to deduce for residue-positions a role in catalysis, ligand-binding, or protein structure,” BMC Bioinformatics, vol. 13, no. 1, article 55, 2012.

M. M. Gromiha and M. Suwa, “Influence of amino acid properties for discriminating outer membrane proteins at better accuracy,” Biochimica et Biophysica Acta, vol. 1764, no. 9, pp. 1493–1497, 2006.

M. M. Gromiha and M. Suwa, “Discrimination of outer membrane proteins using machine learning algorithms,” Proteins: Structure, Function and Genetics, vol. 63, no. 4, pp. 1031–1037, 2006.

M. X. Suresh, M. M. Gromiha, and M. Suwa, “Membrane protein-ligand interactions: new insights from statistical analysis and molecular modeling studies,” Seibutsu Butsuri, vol. 46, p. S408, 2006.

M. X. Suresh, M. M. Gromiha, and M. Suwa, “Analysis and discrimination of ligand binding membrane proteins using a simple statistical approach,” in Proceedings of the 17th International Conference on Genome Informatics (GIW '06), p. 120, Yokohama, Japan, 2006.

C. Elkan, “Boosting and naive Bayesian learning,” Tech. Rep. CS97-557, Department of Computer Science and Engineering, University of California, San Diego, Calif, USA, 1997.

H. Zhang and J. Su, “Naive Bayesian classifiers for ranking,” in Proceedings of the 15th European Conference on Machine Learning (ECML '04), Pisa, Italy, 2004.

H. M. Berman, J. Westbrook, Z. Feng et al., “The protein data bank,” Nucleic Acids Research, vol. 28, no. 1, pp. 235–242, 2000.

G. E. Tusnády, Z. Dosztányi, and I. Simon, “PDB_TM: selection and membrane localization of transmembrane proteins in the protein data bank,” Nucleic Acids Research, vol. 33, supplement 1, pp. D275–D278, 2005.

M. Ikeda, M. Arai, T. Okuno, and T. Shimizu, “TMPDB: a database of experimentally-characterized transmembrane topoligies,” Nucleic Acids Research, vol. 31, no. 1, pp. 406–409, 2003.

P. Raman, V. Cherezov, and M. Caffrey, “The membrane protein data bank,” Cellular and Molecular Life Sciences, vol. 63, no. 1, pp. 36–51, 2006.

S. H. White and W. C. Wimley, “Membrane protein folding and stability: physical principles,” Annual Review of Biophysics and Biomolecular Structure, vol. 28, pp. 319–365, 1999.

M. G. McCammon and C. V. Robinson, “Structural change in response to ligand binding,” Current Opinion in Chemical Biology, vol. 8, no. 1, pp. 60–65, 2004.

I. H. Witten and E. Frank, Data Mining: Practical Machine Learning Tools and Techniques, Morgan Kaufmann, San Francisco, Calif, USA, 2005.

M. Hall, E. Frank, G. Holmes, B. Pfahringer, P. Reutemann, and I. H. Witten, “The WEKA data mining software: an update,” ACM SIGKDD Explorations Newsletter, vol. 11, no. 1, pp. 10–18, 2009.

S. F. Altschul, T. L. Madden, A. A. Schäffer et al., “Gapped BLAST and PSI-BLAST: a new generation of protein database search programs,” Nucleic Acids Research, vol. 25, no. 17, pp. 3389–3402, 1997.

M. M. Gromiha, M. Oobatake, and A. Sarai, “Important amino acid properties for enhanced thermostability from mesophilic to thermophilic proteins,” Biophysical Chemistry, vol. 82, no. 1, pp. 51–67, 1999.

M. M. Gromiha and M. X. Suresh, “Discrimination of mesophilic and thermophilic proteins using machine learning algorithms,” Proteins: Structure, Function and Genetics, vol. 70, no. 4, pp. 1274–1279, 2008.

P. Baldi, S. Brunak, Y. Chauvin, C. A. F. Andersen, and H. Nielsen, “Assessing the accuracy of prediction algorithms for classification: an overview,” Bioinformatics, vol. 16, no. 5, pp. 412–424, 2000.

J. Zhang, P. Hellwig, J. P. Osborne et al., “Site-directed mutation of the highly conserved region near the Q-loop of the cytochrome bd quinol oxidase from Escherichia coli specifically perturbs heme b ₅₉₅,” Biochemistry, vol. 40, no. 29, pp. 8548–8556, 2001.

J. Zhang, P. Hellwig, J. P. Osborne, and R. B. Gennis, “Arginine 391 in subunit I of the cytochrome bd quinol oxidase from Escherichia coli stabilizes the reduced form of the hemes and is essential for quinol oxidase activity,” The Journal of Biological Chemistry, vol. 279, no. 52, pp. 53980–53987, 2004.

K. Yang, J. Zhang, A. S. Vakkasoglu et al., “Glutamate 107 in subunit I of the cytochrome quinol oxidase from Escherichia coli is protonated and near the heme /heme binuclear center,” Biochemistry, vol. 46, no. 11, pp. 3270–3278, 2007.

M. M. Gromiha, Y. Yabuki, M. X. Suresh, A. M. Thangakani, M. Suwa, and K. Fukui, “TMFunction: database for functional residues in membrane proteins,” Nucleic Acids Research, vol. 37, no. 1, pp. D201–D204, 2009.