Special Issue “Digital Twin Technology in the AEC Industry”

. Sustainable building design has become a hot topic over the past decades. Many standards, databases, and tools have been developed for achieving a sustainable building. Not until recently have the importance of structural engineering and its contribution to sustainable building design been full recognised. However, due to the highly fragmented and diversity of knowledge across building and infrastructure domains, there is a lack of approach that can address all the sustainable issues within the structural design. This paper reviews the sustainable design from the perspective of structural engineering: (1) reviewing the current situation; (2) identifying the gaps and diﬃculties; and (3) making recommendations for future improvements. The strategies and indicators, as well as BIM-enabled methodology, for sustainable structural design (SSD) are also discussed in a holistic way. The results of this investigation show that most of the methods are not doing well in terms of delivering a successful sustainable structural design. It is expected that the future BIM could probably provide such a platform to address these issues.


Pl e a s e n o t e:
C h a n g e s m a d e a s a r e s ul t of p u blis hi n g p r o c e s s e s s u c h a s c o py-e di ti n g, fo r m a t ti n g a n d p a g e n u m b e r s m a y n o t b e r efl e c t e d in t his ve r sio n.Fo r t h e d efi nitiv e ve r sio n of t hi s p u blic a tio n, pl e a s e r ef e r t o t h e p u blis h e d s o u r c e.You a r e a d vis e d t o c o n s ul t t h e p u blis h e r's v e r sio n if yo u wi s h t o cit e t hi s p a p er.
Thi s v e r sio n is b ei n g m a d e a v ail a bl e in a c c o r d a n c e wit h p u blis h e r p olici e s. S e e h t t p://o r c a .cf. a c. u k/ p olici e s. h t ml fo r u s a g e p olici e s.Co py ri g h t a n d m o r al ri g h t s fo r p u blic a tio n s m a d e a v ail a bl e in ORCA a r e r e t ai n e d by t h e c o py ri g h t h ol d e r s .

Introduction
What is a "sustainable building?"Written works define it as being designed to adhere to several objectives: (1) to preserve energy and materials and ensure that resources are recycled and that the release of toxic substances is limited throughout the building's process, encompassing the design, building, functioning, preservation, and destruction; (2) to suitably comply with the local environment, values, and societal structure; and (3) to maintain and enhance the standard of people's living whilst preserving the ecosystem's aptitude domestically and globally [1]. is definition brought together what is now known as the three pillars of sustainability [2][3][4]: environmental, economical, and social well-being.In general, design methods for achieving a sustainable building are called "sustainable design."ere are many standards, databases, and tools dedicated to sustainable design in the building sector.e standards including ISO/TC 59/SC 17, ISO/TC 207/SC 5, and CEN/TC 350 lay the foundations for assessing the sustainability of a building during the life cycle.ese standards measure the influence and elements of buildings in terms of their environmental, social, and financial impact via quantitative and qualitative signs [5][6][7].In most cases, these series of standards are merely served as guidelines and need to be used in conjunction with a specific database or rating score system since they provide little information on benchmarks, levels of performance, and detailed information [8].Several databases currently exist for the measurement of embodied energy or embodied carbon: Inventory of Carbon and Energy (ICE), U.S. Life Cycle Inventory (LCI), GaBi, European Reference Life Cycle Database (ELCD), and Ecoinvent [9,10].In order to automate the sustainability assessment of a building, many companies and international organisations have initiated rating systems and tools to facilitate the assessment process.e rating systems such as BREEAM and LEED group the environmental impacts into several sections, produce an overall score for the building depending on points gained in each section, and deliver a certificated assessment [11][12][13].However, these assessments are normally conducted after the design phase and serve primarily as a verification document rather than a decision-aid tool, providing little guidance for the designer during the design process [14,15].Despite the emerging life cycle assessment (LCA) tools (i.e., Athena and Tally) provide more opportunity to assist sustainable design on a building scale, the procedure is similar to the rating systems (i.e., sustainable assessment after the design stage).It seems difficult to integrate sustainability idea/knowledge into the early design stage.is forces us to rethink of the nature of the building design process.
A building is better expressed as a process than a product.e design process of a building normally requires effective and close cooperation among different disciplines (i.e., structural engineers, architects, and MEP engineers).Architects can start drafting architectural designs once they know the needs of the consumer, the tone and idea of the design, and the core mechanical requirements.e models devised outline the relevant geometrical aspects and appearance of the building.At times, this is accompanied by a range of recommendations regarding the structure; this is compiled into either a model or a drawing of the building's design.Emphasis will then be given to the structural and MEP consideration.e structural engineer is required to make the designs more straightforward so that the model can be structurally analysed and optimised to improve the structural performance.
is iterative mechanism ceases when the aims of the design are fulfilled [16].Ultimately, the structural models, architectural models, and MEP information need to be assembled together for the purpose of sustainability assessment.e above describes the current sustainable design process, a "bottom-up" process, while a more reasonable procedure should be a "top-down" process where sustainability is considered at an early design stage for each engineer [17]. is poses a challenge to planning and handling the process properly.
On the contrary, the type of structural system is a significant aspect because it sets the foundation for the design and building work that is undertaken; the nature of the structure layout significantly impacts the use of land, resources, and energy, the release of greenhouse gas, preservation, recycling, the cost of the process, and the management of risks [18,19].Moreover, the structural material accounts for a large proportion of a building's mass, thus providing over 50% of the embodied energy and carbon of a building [20][21][22].However, despite this growing awareness, there is scant evidence that the importance of a structural engineer has been sufficiently recognised.Structural engineers do, however, have less influence over a building's sustainability in comparison to architects and clients. is can be due to the fact that the knowledge of sustainability for structural engineers is highly fragmented, and there are no clear guidance and effective tools to assist structural engineers for performing sustainable design [23,24].Some studies focus on methodologies, strategies, and parameters for sustainable structural design.For instance, Anderson and Silman [25] investigated the differential impact of material selection, recycling, adaptability, and thermal mass effects on greenhouse gas reduction.ey identified that the thermal mass effects contribute a lot to reducing carbon dioxide emissions, and material selection is the most positive design strategy before the operational stage of a building.Danatzko and Sezen [26] discussed five positive and negative sustainable attributes of sustainable structural design methodologies.ey suggested that no single methodology can address the complex issues of sustainable structural design, and a combination of the methodology is recommended.More details are discussed in Section 3.2.
Several researchers pay attention to compare the case study by calculating embodied energy or carbon of a structure.For example, Sinha et al. [27] performed a comparative study for calculating the energy footprint and carbon footprint between the wooden building and concrete building.e results indicated that the energy footprint of the wooden building is 43% lower than that of the concrete building, and the carbon footprint of the wooden building is 75% lower than that of the concrete building.Guggemos and Horvath [28] compared the environmental effects between concrete and steel-framed structures (much of the same layout) over the life cycle.During the construction phase, compared to the steel structure, the concrete structure consumed more energy, CO 2 , CO, NO 2 , and SO 2 due to the large formwork, longer equipment uses, and more materials to be transported; thus, minimizing the amount of temporary material use is an effective way to reduce the impact.However, when expanding the construction phase to a wider range (i.e., entire life cycle including design, construction, use, and end of life), the differences gradually disappear due to the fact that the use phase accounts for over 80% energy use and CO 2 emissions over the life cycle, whatever material is used in the frame structure.Catherine et al. [29] analysed 200 building structures from the industry to benchmark their environmental impact.
e normalised material weights for all the structures were 200-1800 kg/m 2 , and normalised embodied CO 2 ranged between 150 and 600 kg CO 2e /m 2 .
In theory, these methodologies and strategies can be used for sustainable structural design (SSD) [30,31], while in reality, they have not been utilised effectively in a holistic way. is can be attributed to several reasons.Firstly, unlike the sustainable design approach for architects, there are no exclusive standard, database, and tools specifically designed for structural engineers to achieve a sustainable structure.Secondly, the structural engineer's tools, such as structural analysis software, sustainability assessment software, and BIM software, exist as separate entities.Despite there exists the interoperability that is based on interoperable languages (i.e., IFC and gbXML), the process for converting the format is a time-consuming task and may lead to data loss at times.Lastly, there is a lack of effective collaboration between architects and structural engineers.Generally, most of the tasks related to sustainability belong to architects who represent the whole design team to communicate with the sustainability consultant.It should be recognised that not only architects but also structural engineers have great potential to reduce the environmental impact over the design process [32][33][34][35][36][37].
e ultimate goals of sustainable design can be achieved by efficient information exchange and effective collaboration between structural engineers and architects.A central repository, namely, common data environment, would contribute to the high level of 2 Advances in Civil Engineering cooperation.In this case, there is a need to have a unified platform that can integrate sustainability considerations within a common environment between designers.Building information modelling (BIM) involves a standardised process that ensures relevant data and expertise are reused across various fields in the life cycle process.BIM has the trend for constantly growing to utilise the wide array of information that comprises a conventional building project.is information, referenced as being n-dimensional (nD), incorporates elements including time, expense, sustainability, and potential risks.As with several other nD building elements, incorporating the issue of sustainability into BIM is yet to be fully developed [38][39][40].Currently, there are many methods that can integrate sustainability issues into BIM or conduct sustainable assessment based on the BIM models [41][42][43][44].For example, Ilhan and Yaman [45] extracted the IFC data from BIM models and proposed a green building assessment method for assisting designers in the generation of documentation for obtaining green building certification based on the BREEAM category.e method can automatically calculate the green rating and provide feedbacks to inform the design.Shadram et al. [46] identified the lack of interoperability between BIM and LCA tools and proposed a framework to integrate extract, transform, load (ETL) into BIM to enhance BIM-LCA interoperability and thus enable a semiautomated assessment process.Although structural engineers can use these methods for making a rough sustainable assessment of their design, these methods are specifically tailored for architects or clients.From the structural engineering perspective, several attempts have been made to combine BIM, structural analysis, and LCA or develop API to accomplish structural sustainability appraisal in BIM [47][48][49].Yet there exist many papers on green BIM or structural optimization, most of them have several steps for conversion among different formats, the commonly accepted (standardised) procedure is lacking.Currently, BIM software is still a long way from being fully integrated with various databases for the sustainable design project.Better and more seamless integration between BIM and sustainable design may come in the future, but currently, the integration requires considerable effort and time such that the evaluation of sustainable data ends up being performed after the design stage in most cases.
As a result, this paper attempts to fill the gap by reviewing sustainable design with emphases on the structure.e specific objectives are (1) to investigate the current situation of sustainable design, especially sustainable structural design; (2) to identify the challenges and problems associated with integrating the sustainability issue into structural design; and (3) to discuss solutions and potential development for achieving a holistic design.
e review consists of mainly two parts: in the first part, a comprehensive investigation of the standards, databases, tools, and software regarding sustainability in the sustainable building design domain is identified through a wide range of sources.
e emphasis is put on the aspects that are directly related to the structural design.In the second part, the current statuses of sustainable structural design (SSD) are investigated with emphases on the strategies and indicators.Furthermore, the BIM-enabled methodology for achieving a sustainable structural design is also summarized.
e challenge that sustainability-BIM integration faces is discussed, and the solutions to this incorporation are proposed for future improvements.

Sustainable Design for Buildings
2.1.Standards.Over the past decades, a significant number of sustainable design approaches for buildings have been developed by diverse organisations throughout the world.
e term "sustainable design approaches" in this paper refers to all the standards, databases, and tools regarding sustainability in the building design domain.e history of sustainability towards standardization can be traced back to 1993 when a standardised approach called the "code of practice" was developed by the Society of Environmental Toxicology and Chemistry (SETAC) [50].
e approach divided the sustainable assessment into a three-step process, including the definition of the goal and scope of the LCA, the Life Cycle Inventory analysis (LCI) phase, the life cycle impact assessment (LCIA) phase.e International Organisation for Standardisation (ISO) attempts to provide an additional definition of this in the mid of 1990s.A series of LCA criteria was then defined or updated by the ISO including Subcommittee 5 (SC 5), Technical Committee 207 (TC 207), and Life Cycle Analysis and Environmental Management.In 1997, based on the three-phase process proposed by the SETAC, ISO 14040 was released by incorporating the "life cycle interpretation" phase into the criteria.Since ISO 14040 provides only the principle and framework without describing and specifying any detailed LCA methodologies and techniques, ISO 14041, ISO 14042, and ISO 14043 were produced with the aim of providing strategies of the methodological basis during 1998 and 2000 [51,52].
Yet, this criterion is only aimed to provide a universal approach for LCA practice and hence does not correspond with the extensive judgements needed in relation to modelling when conducting an LCA.As a result, the standards proposed by ISO/TC 207/SC 5, ISO identified that the broad array of possible implementations for LCA needed fieldspecific Technical Committees to provide an additional definition of LCA that incorporated the expert opinion of those working in the area.As a result, Subcommittee 17 (sustainability in building and civil engineering works, SC17) was developed under TC 59 (buildings and civil engineering works) to produce numerous criterions that provide additional definitions of the LCA framework.erefore, various criteria and guidelines (ISO 21929, ISO 21930, and ISO 21931) were produced under the direct command of ISO/TC 59/SC 17.
e ISO standards outlined above are regarded as the standard international outlook regarding LCA conduct.However, the necessity for a consensus has resulted in the ISO failing to consider certain modelling aspects that are needed for standardised LCA practice.e biggest challenge for the standard is that there is a lack of reliable, comparable benchmarks and transparency in the methodologies.e results of building assessment are not comparable to one another.Furthermore, the above series of standards are used as frameworks or guidelines for sustainable design since they do not provide benchmarks, levels of performance, and detailed information, which need to be used in conjunction with a specific database or score system.Whilst LCA is an important mechanism for contemplating the influence of judgements in terms of the system, it is the only one mechanism that should be utilised for considering sustainability from a wider perspective.e limitation of LCA concerns its generic Life Cycle Inventory (LCI) datasets that overlook the viability of special and temporal matters.For instance, "land use" is seldom incorporated into LCA as there are no means of recording it within an inventory that is widely recognised.Studies into LCA have delivered significant process in introducing acknowledged ways of measuring land, water, waste, and flows that happen over a range of locations and times.

Databases.
During the LCA process, the inventory analysis is an important step since the LCI database gives the basic data for life cycle assessment.In recent years, there has been an increasing amount of databases worldwide that can be used to carry out an life cycle assessment.ese databases can be divided into two types: general database and specific database.e difference between the general database and specific database lies in the data coverage.General database refers to the data that may cover many fields (e.g., transportation, agriculture, manufacturing, building, chemicals, and waste management), whereas the specific database in this paper means that they are targeted for only one field (i.e., building or construction).General databases contain the European Life Cycle Database (ELCD), U.S. LCI, Swiss Ecoinvent, and German GaBi [53][54][55].Specific databases include the Inventory of Carbon and Energy (ICE) from UK, Canadian Athena, Australian building products LCI, and New Zealand building material embodied energy database [56,57].e specific databases are normally designed for the life cycle assessment of a building.Table 2 gives a nonexhaustive summary of the LCI database around the world.
e biggest challenge for the database is inconsistencies in the data source, which means that the use of different databases leads to a comparison issue.For much the same as the layout of a building, the results from SimaPro, GaBi, and ICE show significant difference due to the lack of reliable and transparent data.ere is a demand for a reliable database to be provided by the manufacturing and construction industry.Furthermore, there is still a need for updated values for different countries and regions.As a result, it is likely that, in the future, LCI records will provide the necessary data for the analysis of life cycle impact within LCA research.Moreover, the LCIA stage needs to be spatially and temporally broad to collage the flows happening within the life cycle.ere is a need for updated values per country as most of the databases have not been updated with progression of time.As far as the structural aspect is concerned, there are no standards and databases specifically designed for structural engineers.However, this is not a barrier to deliver a successful sustainable structural design since the environmental impact of a structural material can be obtained from these databases.

Tools.
e term "tools" in this paper refers to the rating systems and software related to sustainability in the building design domain.Generally, tools to perform environmental impact assessment can be divided into three levels [58][59][60]: (1) level 1: product or component level tools, such as SimaPro, BEES, Gabi, Umberto, and TEAM; (2) level 2: building level tools assisting design decision-making, such as Tally, Athena, eTool, and Bionova; and (3) level 3: rating system or building, infrastructure, and community assessment tools, such as BREEAM, LEED, Green Star, CASBEE, and SBTool.
Specifically, level 1 considers the resources and elements individually, which are then compiled to devise a life cycle consideration for the building as a whole.Level 2 contemplates the whole building as its initial basis.is could, for instance, be the building's shape, before consideration is steadily given to the selection of resources in walls and frames and suchlike.A whole building's environmental impact can be assessed through the level 1 or level 2 approach.e output indicators of these assessments normally include global warming (kg CO₂eq), sometimes containing primary energy (MJ), acidification (kg SO₂eq), eutrophication (kg NEQ), ozone depletion (CFC-11eq), smog formation (O₃eq), nonrenewable energy (MJ), and renewable energy (MJ).Among these indicators, the global warming, namely, "embodied carbon," expressed in carbon dioxide equivalents (kg CO₂eq), is regarded as the most important factor.e other greenhouse gases can be converted into CO₂eq using conversion factors in order to obtain a common unit for the environmental impact.
It should be noted that the incorporation of BIM and LCA mechanisms within the initial design process is a growing tendency for automating the judgement process based on the outcome.BIM is utilised to uncover the information relating to the building (material measurements) which are subsequently processed within external LCA software or else incorporated "plug-ins" in which LCA can be calculated within the BIM process.e advantages of BIM in the LCA applications include preventing data from being resubmitted manually, enabling analysis to be conducted in real time, improving the assessment of the building overall, and utilising an assessment interface that is accessible to the 4 Advances in Civil Engineering Advances in Civil Engineering user.On the contrary, the drawback may lead to data loss and format conversion from different software.Although the industry foundation class (IFC) has been used to enhance interoperability between different software for many years, a more automatic and integrated BIM-enabled LCA method is still lacking.
Level 3 is generally a scoring system that provides comparisons throughout the building industry.It is used to analyse the results for the building overall in terms of the sustainability across the built environment life cycle, from new construction to in-use and refurbishment. is process is to advocate the spread of design processes and to advocate to designers the notion of exceeding the building guidelines Figure 1 shows all the aforementioned standards, databases, and tools to facilitate understanding.Yet, assessing these systems critically is beyond the viability of this paper, which instead places its emphasis on how it relates to sustainable structural design.Despite the fact that some of the structural design work is not directly related to the rating system, even reduced use of water in concrete can contribute to the water protection and natural environment by integrating the water collection systems and structural systems.
e impact that the design of the structure has on the rating tool incorporates various factors including the use of resources, the structural system that is chosen, the disassembly design, and the dematerialisation.Eight rating systems have been considered within this work to analyse the current contribution of SSD to the rating process and to outline enhancements to them.e analysis considers embodied energy and other potential signs of sustainability for the design structure.
e work chooses them for being original, transparent, and extensive.e influence of SSD on rating credits, or in other words, the structural points in the rating system, can be divided into three parts: direct, indirect, and supporting.Taking BREEAM as an example, the full credit is 100 points which contains ten sections: management, health and well-being, energy, transport, water, materials, waste, land use and ecology, pollution, and innovation.Four out of these 10 sections are related to structural design.ey are energy (direct), materials (direct), waste (indirect), and land use and ecology (supporting).us, the total credits of these four parts are 44 points.Other rating systems can be done in the same manner.
Table 3 outlines the credits connected to structural trades within the process of measuring sustainability, indicating that the average figure of SSD-associated credits was greater than expected at approximately 46% [24,33,38]. is can be explained by the fact that the influence that structural design exerts on the rating system credits can be divided into two categories based on the involvement of structural engineers: direct influence and indirect influence.e direct influence deals with the material and component level (i.e., material use or cost of a beam and column), while the indirect influence is related to the whole building level, such as shortening the construction schedule, increasing the net height and net area, reducing equipment and labour, and improving the lifespan of a building, which need to be considered accordingly.From authors' point of view, these previous studies have underestimated the contribution of structural design to the rating system credits since they consider only the direct influence.Moreover, there are various rating tools enabling a significantly greater proportion of credits to be ascertained, suggesting that these rating tools provide a greater array of SSD openings to acquire the certification.
Whilst the majority of the research referenced emphasised the limitations of the rating tools in measuring the influence of the design of the structure, the consideration here has identified that the rating methods are fairly progressive in analysing SSD processes, taking into account the majority of issues in this regard.Furthermore, they frequently utilise quantitative measures where they can.ese processes give varying significance to various SSD issues based on the area in which they were introduced.For instance, in China, the elements connected to off-site environment are given emphasis, perhaps because the construction process within China is presently especially extensive.
Based on the review of sustainable design approaches for buildings, it can be inferred that the biggest challenge for the standards and databases is the lack of reliable, comparable benchmarks and inconsistencies in databases.Furthermore, the current sustainable design tools typically assess the sustainable performance of a building at a later design stage, thus being a verification or show-off document rather than a decision-aided tool, providing little guidance for designers over the design process.Despite efforts which have been made towards integrating the sustainability issue into the early design stage, no single solution can be reached to come up with a holistic and comprehensive sustainable design.
is can be attributed to the fact that there is a lack of efficient approach and tools that can support systematic and effective information exchange between different Advances in Civil Engineering participants.Furthermore, although structural plays an important role in sustainable design (score in the rating system), there is scant evidence that the importance of a structural engineer has been sufficiently recognised.e higher percentage of credits offers a great opportunity for structural design acquiring the accreditation of sustainable design.In the next section, the current situations in the sustainable structural design in terms of strategies and indicators will be investigated.e challenges and difficulties associated with integrating the sustainability issue into structural design are also identified and discussed.

General Processes of Structural Design.
A building process can be divided into four major periods: design, construction, in-use, and demolition.e design work not only highly influences the overall cost but also greatly affects the environmental impact.
e possibility of changing the sustainable performance is high over the design stage and gradually declines as a project progresses (Figure 2).Generally, a structural case-the design of a building, for example-commences with theoretical foundations relating to aspects connected to the structure and the architecture.From contemplation of the needs of the consumers' design, its thematic base and its core mechanical values can enable architects to start drafting resolutions for an initial judgement.
is judgement will incorporate self-regulation for preserving cohesion in the design concept, viability tests, and  8 Advances in Civil Engineering suchlike.When concepts have been judged to be viable, the extensive stage of architectural moulding will commence.e results of this process outline the relevant aspects relating to arithmetical aspects or its look.ese are presented in either model or drawing form.e emphasis will then turn to a structural consideration.
In implementing the model or drawing for the subsequent stage of evaluating the structural design, it is necessary to make the work produced more simplistic so that only the mechanical sentiment is preserved.is might include, for instance, a beam-truss structure within a case made out of a steel frame.is simplified outline can thus be judged for its consistency during this process, and the outcome can be additionally enhanced by altering the structure to maximise the procedure.It is normally expert structural engineers who possess considerable experience and who decide whether a different option is better or if modifications should be made.
e state-of-the-art optimization values state that this is a reoccurring stage that concludes once the aims of the design have been fulfilled.Subsequently, additional models or drawings might be suggested for improving the acquisition and manufacturing process.Ordinarily, judging the maintenance of the models proposed also occurs at the subsequent design stage.
Once the acquisition and manufacturing stage has occurred, further alterations can still be necessary due to problems with resources or the construction process.Required alterations to the architectural and structural aspects can be proposed, and the present formation of the design is reviewed.Within the construction stage itself, people asking for alterations is frequent.is can be instigated by a variety of aspects, including the identification of the collision or conflict, and problems with establishing or maintaining the building.is indicates that being adaptable is crucial within the whole design and building process and ought to be given appropriate scrutiny.

Sustainable Structural Design Strategies and Indicators.
It is not the intention of this paper to provide an extensive and deeper discussion on the process of structural design.e focus will be put on the area that is related to sustainability.From authors' point of view, the following aspects should be well understood before the commencement of SSD: (1) What phase will be considered?(i.e., embodied phase, operational phase, end-of-life phase, or the whole life cycle).( 2) What scope will be considered?(i.e., component level, structure level, or the whole building).(3) How to quantify the SSD?What are the strategies and indicators?When to perform the SSD? (i.e., early, middle, or late design stage).What tools can be used?
e life cycle phase for SSD can reference the classification of sustainable design, which can be divided into three phases, namely, embodied phase, operational phase, and end-of-life phase (Figure 3).
e structural system contributes a lot to the embodied and end-of-life impacts, not much affects operational impacts.e detail analysis is showed as follows: (1) Embodied impacts: the structural type ordinarily comprises a significant proportion of a building's mass.us, it is a significant factor of the influence on the environment at the beginning stage.Office building LCA research that monitors this indicates that the structure of a building can be responsible for a figure ranging from 30 to 70% of the embodied energy over the construction process.Embodied energy refers to the overall amount of energy used to remove, create, implement, and eradicate a part or system.e vast array is because of various aspects, such as contrasts in the form and scale of a building, the construction sort, and the way in which the structure is defined (impacting upon whether features such as curtain walls are included or excluded).(2) Operational impacts: from a structural perspective, the influence of structure thermal mass and thermal aspects are the prominent aspects that impact upon the energy results within the functioning stage.(3) End-of-life impacts: getting rid of structural resources can have a notable influence because of the restricted landfill space and the possible pollution of disposal locations.
It is obvious that the scope of SSD should focus on the component and structure level.e influence of structural design over the sustainability can be seen from two different angles: direct influence and indirect influence.e direct influence deals with the material and component level (i.e., material use), while the indirect influence is related to the whole building level, such as shortening the construction schedule, increasing the net height and net area, reducing equipment and labour, and improving the lifespan of a building, which need to be considered accordingly.On the contrary, these strategies focus only on the material or component level performance, which may result in making  Advances in Civil Engineering overall building system less sustainable by not considering the relationship and interactions with other parts, or in other words, not in a holistic way (multiperspectives).As such, an all-encompassing strategy that optimises a building's mechanical, financial, ecological, and energy functioning is yet to be fully expanded.For instance, when structural engineers are optimising a beam's height, they are required to judge the impact on the sustainability not only at the component level but also at a building level.e optimum sustainable solution for the slab might not be the optimum solution for the whole building if the optimum solution minimises embodied carbon of the slab and, at the same time, increases the depth of the slab.
e indirect influence of optimising a structural component or material on a macroscopic level needs to be considered in a holistic way.Furthermore, some approaches or objectives might contradict other aims relating to sustainability.For instance, restrictions on a structure's carbon and energy might result in the structure's expense being elevated.Any construction projects need to achieve a balance between a lower cost and a higher reliability [66]. is notion can also be applied to the formation of a structural design, meaning that an appropriate arrangement between theories focusing on health and the environment can be reached.
To indicate the correlation between design theories and their influence on sustainability, various approaches have been conducted to categorise them in a natural manner.Danatzko and Sezen [26] suggested that SSD approaches be categorised as indicated in the following: (1) least material condition; (2) minimizing embodied energy; (3) reducing material production energy; (4) performing life cycle assessment; and (5) reuse of the structural system.Yet, the aforementioned categorisations can instigate uncertainty for a variety of aspects.Limiting the utilisation of resources, the production of energy and the embodiment of energy incorporate similarities and can be categorised more specifically.
e life cycle assessment is a mechanism used for making a judgement as opposed to being a theoretical approach.Optimising the replication of structural systems incorporates restoration as opposed to a fresh, original assignment.
A further categorisation was indicated by Anderson and Silman [25] which emphasised theories intending to limit the carbon footprint of buildings.ey were (1) design for adaptability; (2) design for efficiency; (3) design for energy; (4) design for recycling; and (5) design for materials.is partly linked with the categorisation proposed by Danatzko and Sezen.For example, design for materials corresponds with resources being selected to represent products being used again.is relates in part to the notion of minimizing material production energy.e concept of design for energy partly compares to Danatzko and Sezen's minimizing embodied energy concept, comprising techniques intended to limit the operational energy of the building.Design for adaptability is connected to reusing structures already in ready and devising fresh ones that can be reused subsequently, which is similar to the reuse of the structural system.Webster [36] suggested that the structural engineer can contribute to the environmental impact by using the following methods: (1) use of salvaged materials or the content of the material can be highly recycled; (2) improve the durability of the concrete structure since it would last at least 50 years; (3) improve the adaptability of the structure that can be adjusted over its entire life; (4) efficient use of structural materials towards minimizing the environmental impact; and (5) use of structural materials that can be reused or recycled, and the structural system can be easily disassembled.SEI Sustainability Committee incorporated durability, adaptability, and human health into the SSD method.ey reported that durability and adaptability are broad perspectives and are difficult to quantify.e human health much corresponds to the internal finishes rather than the structural design aspect.
Having recognised the impact that the building structure has on the sustainability, researchers and practitioners have investigated the structure performance on the environment from a practical perspective.Several researchers have studied the embodied CO 2 emissions and cost from a structural element level (i.e., beam, slab, and column).For example, Hájek et al. [68] applied the life-cycle assessment methodology to assess the performance of the concrete slab.ree structural floor alternatives ranging from NSC to HPC were chosen for the environmental assessment.ey suggested that when evaluating the environmental impacts of concrete structures, a detailed and uniform LCA is greatly demanded.Yeo and Gabbai [69] performed a study for optimising a simple reinforced concrete beam with the fixed moment and shear strengths in terms of sustainable design.e results indicated that in order to reduce 10% of the embodied energy of a beam, the cost will increase 5% accordingly.A further study by Yeo and Potra [70] presented an optimization approach for a structural engineer to evaluate the sustainability and economic objectives.A reinforced concrete frame was used as a case to illustrate the proposed approach.e results indicate the developed approach can reduce carbon emission by 5% to 15%.Foraboschi et al. [71] studied the embodied energy of tall building structures in the range of 20 to 70 stories.e results indicated that the lowest weight of a structure does not necessarily mean it has the lowest embodied energy.e embodied energy largely depends on what type of slab is used in a structure.ey also concluded that the steel structure consumes more embodied energy compared to that of a reinforced concrete structure.Gan et al. [72] developed an optimization approach for costoptimal and low-carbon design of the high-rise reinforced concrete structure by using parametric modelling and genetic algorithm to define the relationship between structural members and the behavior of the entire building structure.
e proposed approach can reduce the carbon emissions and material cost by 18-24% after performing the optimization.Weerasuriya et al. [73] proposed a framework to estimate accurately the potential of natural ventilation of a high-rise residential building considering indoor and outdoor air flows, heat gain, and occupant thermal comfort by combining the computational fluid dynamics (CFD) simulation, multizone airflow modelling, and building energy simulation (BES).
e results showed that the electricity consumption can be reduced up to 25% by employing wind-10 Advances in Civil Engineering driven natural ventilation and up to by facilitating the buoyancy-driven natural ventilation.e most recent analysis of the sustainable structure design was undertaken by Pongiglione and Calderini [24].ey observed the significant elements and stages for undertaking the design of a sustainable structure, which incorporates the desired influence, approaches, and boundaries.Additionally, Bakhoum and Brown [34] suggested a sustainable scoring mechanism to measure structural materials.e tool incorporated reference to various sustainable aspects that impact upon the structural resources that are chosen.Cole and Kernan [67] examined the overall energy utilised in an orthodox 4620 m 2 three-storey, generic office building in terms of varying wood, steel, and concrete provisions.ey deduced that the structure can constitute of a sizable element of the energy used within the early stages of a business establishment.
eir conclusions verify the findings of other research studies that the structure can be the biggest individual aspect of energy at the embodied stage (Figure 4).For an overview of some of these efforts, refer to the Ph.D. thesis of Hou [74].
Based on the above question and previously reviewed strategies, the classification for methodologies of SSD can be divided into the following parts: minimize material use; minimize global warming; minimize energy; minimize nonrenewable energy; minimize total cost; minimize total weight; maximize material or system reuse; maximize material recycling; and maximize human health.Table 4 shows a summary of strategies and classification method to deliver a sustainable structural design.
On the basis of the sustainable structural design strategies and indicators, a holistic decision supporting the approach that integrates structural design and sustainability issue to assist structural engineer decision-making is needed.In the following section, various methods of incorporating the sustainability issue into structural design through BIM are identified and discussed with the aim of providing insight into the current situation.

Current Practice of BIM-Enabled SSD.
In order to automate the process of SSD, some vendors have developed tools to assess the environmental impact of a structure.e trend is to integrate the sustainability into BIM software.As a prerequisite, the structural analysis needs to be conducted in advance before generating a model in BIM software for the sustainable assessment.Currently, there are several methods that can integrate sustainability issues into BIM or conduct sustainable assessment based on the BIM models [29,[76][77][78][79][80], as follows: (1) Export the BIM model to external software, normally LCA software, to conduct sustainable assessment, such as IES VE, EnergyPlus, Ecotect, Green Building Studio ™ (GBS), SimaPro, Athena EcoCalculator, DesignBuilder, Bentley Hevacomp, and TAS. is process often requires the BIM model to be saved as another format, such as IFC, gbXML, DXF, and Excel.e advantage of this method is that it is easy to use, and the disadvantage of this method includes time consumption and the process is complicated, like a verification document rather than a decision-making tool.(2) Use of the "Quantity Takeoff or Material Takeoff" function in BIM: the new parameters such as sustainability indicators can be added as project parameters by creating a formula.e indicators such as embodied CO 2 can be calculated by multiplying the mass of the material and embodied CO 2 per kg.e mass of the material can be obtained from "Materail Takeoff," and embodied CO 2 is taken from an Excel format database, such as Bath ICE database.
e disadvantage of this method is that some of the parameters need to be extracted from the database manually and input into the Material Takeoff spreadsheet because they sometime mismatch.
(3) Preinstall LCA software within the BIM environment, and connect with a structural analysis tool-this kind of software is like a "plug-in" or "addin," such as Tally and Environmental Analysis Tool ™ (EA Tool ™ ).Compared with methods (1) and ( 2), this method is more "advanced."e positive attribute of this method is that it allows users to calculate the environmental impacts of the building material directly within the BIM environment right after the completion of the model.(4) Use of API to accomplish BIM extension [46,81]: developers depend on a range of techniques to coordinate with the BIM model.For instance, numerous software packages depend on an open file format, including STEP, IFC, and CIS/2.ese applications are used to transfer data across various applications.Alternative integrations are found on an impartial database driver such as ODBC, which functions as a converter between different applications.ere are many types of programmers that can be used in the Revit platform API, such as C#, VB, SQL, and JAVA.It should be recognised that xBIM is a .NET opensource software advancement BIM toolkit that permits.NETdevelopers the opportunity to access, devise, and monitor BIM models within the IFC format.
ere is comprehensive assistance for geometric, topological operations and visualisation.Furthermore, xBIM encourages bidirectional translation across COBie and IFC format.Essential libraries for influencing data are all outlined in C#. e prominent element of the geometry engine is produced in C++.
(5) Use of ontology to connect BIM and LCA database [23,49]: firstly, a LCA database ontology is developed.Secondly, a BIM model is constructed in Revit and exported to an IFC format and then to an OWL format-BIM ontology.Eventually, by combining the two ontologies, a new BIM ontology is constructed and transferred to IFC and then to a BIM model.Overall embodied carbon of the building is calculated through a BIM schedule.e disadvantage of this method is that the ontology for the integration Advances in Civil Engineering the LCA database and BIM is still not fully automated, and importing IFC back into BIM can result in some loss of data.Figure 5 graphically shows the above methods with more detail.

Discussion
From the methods mentioned, a number of elements should be recognised.To achieve a sustainable structure, a joint effort is needed to come up with a holistic design both within and outside structural engineers.
e challenges that structural engineers face include the following: (1) A sustainable structural design, allowing consideration of varying aims-including safety, environmental impact, cost, functionality and aesthetics-necessitates an extensive review of the orthodox sequential structural process.Centralisation of different domain information (i.e., structural analysis, sustainability assessment, and detailing software) in a common data environment is a trend.As mentioned earlier in this paper, the interoperability among different software often leads to data loss and difficulties in conversion and change.Additionally, BIM mechanisms presently give restricted assistance in regulating alterations over a Figure 4: (a) Average embodied carbon in office buildings [22].(b) Average embodied energy in office buildings [67].(2) Consideration of not only structural material's impact but also impact from structural components and structural form: from the literature review, most of the SSD use the strategies of structural material quantities for minimizing the environmental impact.is, however, is not the only important parameter.For example, from a whole structure perspective, the layout of columns, beams, and slabs also has a significant impact on the overall sustainable performance of a structure.Furthermore, the structural analysis focuses on the material or component level for optimising the environmental impact, which may result in making the overall structure or building less sustainable by not considering the relationship and interactions with other parts.e optimal components are not necessarily optimal for the structure as a whole.A higher degree of impact assessment among different building levels is needed.How to take these factors into full consideration is indeed a challenge.
(3) Strengthened, efficient, and systematic information exchange between architects and structural engineers: a greater engineering response is needed at the initial stage of the design process.However, currently, the architectural model from the architect that aims to deliver to the structural engineer cannot be used directly for the structural analysis.e structural engineer needs to reconstruct the same model from structural analysis software.Although some of the software provided are compatible with BIM tools (i.e., Autodesk Revit), a more streamlined and integrative process is highly needed.
(4) Presently, the majority of structures is devised to limit the embodied influence, as opposed to the overall influence.Minimal advancement in expenses at the initial stage could drastically diminish the influence of the life cycle by reducing the maintenance and permitting salvage or disposal at the process's conclusion.Furthermore, designers ought to try and optimise the adaptability of the design of any structure to permit further alterations in the building's function.(5) Consideration of the potential influence of the structural material and structural system (form) on the construction and building sustainability, such as lifespan, construction schedule, labour and equipment, and material availability: small changes in initial design could dramatically change the way of construction, which in turn influences the overall sustainability of a building.
It is argued that structural design is not directly relevant to the operational energy use or CO 2 emissions during the use phase, but it has potential influence on the operational phase from the following three aspects.Firstly, the operational CO 2 emissions or energy use can be reduced with the emerging technology over time, but the embodied energy and carbon dioxide cannot be reversed.e structure accounts for the greatest weight in buildings and therefore  Advances in Civil Engineering 13 contributes, average, to more than half of the total carbon dioxide emissions due to materials.In terms of infrastructure, such as bridges, roads, or stadia, the energy consumption and CO 2 emissions during the operational phase seem rather low, while the structural part (i.e., material production, transport, construction, and demolition) accounts for most of the energy consumption and CO 2 emissions over the life cycle.Secondly, with the effective reductions in operational carbon dioxide of the building in future decades, embodied carbon dioxide will become a more significant percentage of GHG emissions.Some buildings have a short life, resulting in a high percentage of embodied carbon dioxide over the total environmental impact of the life cycle.irdly, the structural material selection and the processing and manufacture of structural materials cause enormous off-site impacts prior to the construction or use phase.
e development of a holistic and integrated system becomes an important prerequisite for effective and efficient information sharing and exchange.e fundamental idea of system integration is enabling two or more systems to communicate, share, and exchange information and to interoperate to achieve a common objective.Interoperability, the ability that data generated by one party can be interpreted by all other parties, is the first and most important step towards system integration.Data interoperability focuses on developing common data models, while framework interoperability is achieved by common communication language and protocols.IFC is the most comprehensive international standard for BIM interoperability.Developed and managed by building SMARTIFC, IFC specifies a conceptual data schema and an exchange file format for BIM data, providing a comprehensive description of project structure, physical components, spatial components, analysis items, processes, resources, controls, actors, and context definition.Currently, it has been recognised as the mainstream standard for open BIM and supported by more than 20 vendors.Although the richness of information offered by IFC has been constantly improved since the release of IFC4, the identified barriers to interoperability and applicability include (1) limited expression range; (2) lack of logical formalism that enables rigorous semantics; (3) difficulties in partitioning the information; and (4) multiple descriptions of the same information.e barriers seem to be mainly caused by the nature of the EXPRESS language behind the IFC.
e emergence of semantic web technologies can connect all kinds of information into one semantic web and provide a semantically rich methodology for improving the interoperability by enriching the EXPRESS data.e great advantage of using semantic web technologies is that the schema, the instances, and the rules can all be described using one and the same language.Beetz et al. [82] and Krima et al. [83,84] discussed that the logic-based language such as OWL can bring modelling advantages in knowledge representation, reuse of existing information, semantic data sharing, and interoperability with semantic web.e initial effort to convert EXPRESS into OWL was made by Schevers and Drogemuller [85].
e developed prototype and mapping create the opportunity to use semantic web-related technologies for building information models.is initial effort was extended by Beetz [86] and Knublauch et al. [87] with proposing a semiautomatic method and system for the conversion from EXPRESS to OWL.Pauwels and Terkaj [88] proposed a semiautomatic method for converting EXPRESS schemas into OWL ontologies and showed how Semantic Web Rule Language (SWRL) rules can be exploited to enrich an OWL version of IFC and create a semantic checking environment.To enable the encoding of semantics with the data, technologies such as Web Ontology Language are used to formally represent metadata.Ontology can describe concepts, relationships between entities, and knowledge representation [89].ese embedded semantics offer significant advantages such as reasoning over data and operating with heterogeneous data sources.Compared with the IFC used for BIM data models, ontology-based approach has a number of advantages:(1) ontology enables linking other domain data (such as sustainability) into the building information model; (2) ontology provides a formal and consistent taxonomy and classification structure to map concepts between domains; and (3) ontology can provide reasoning function for automated information processing and decision support by adopting semantic rules [90].
Currently, several studies have attempted to combine BIM and ontology for performing analyses, such as facility management [86], plan verification [91], precast components [92], construction cost estimation [93,94], and sustainable design [95,96].As a result, it is expected that the use of ontology for integration of sustainability with BIM models will extend the interoperability of BIM and thus facilitate the sustainable structural design in the future.
Apart from the semantic web technologies, artificial intelligence (AI) has attracted great interest due to the capability of learning how to perform a specific task from known data.Many of the AI branches, such as machine learning, pattern recognition, neural networks, fuzzy logic, evolutionary computation, deep learning, expert systems, probability theory, discriminant analysis, swarm optimization, metaheuristic optimization, and decision trees, have been used in structural engineering.Among the different AI techniques, machine learning (ML), pattern recognition (PR), and deep learning (DL) have acquired considerable attention and are establishing themselves as a new class of intelligent methods for use in structural engineering [97].AI techniques can be effectively used to check the general validity of laboratory and help minimize time-consuming laboratory or field tests.However, the application of AI techniques in the sustainable design remains to be developed.Recently, effort has been made [98] to combine BIM, data mining (knowledge discovery), and semantic technique to enable BIM-based information retrieval in support of evidence-based sustainable design in the early design phase.
e proposed approach was based on the data and knowledge discovered in previous projects to enhance decision-making with the case-based design.e knowledge and data repository consists of 531 building models, while data mining was performed over the sensor data using motif discovery and association rule mining.It is a pioneer work 14 Advances in Civil Engineering that decision-making is based on discovery in previous projects and embedded in digital data by combining data mining and semantic modelling for case-based sustainable design.is approach highlights the potential benefits of using AI technology on the sustainable structural design in the future.A recent study conducted by Hao et al. [99] applied 3D graphic statics within a neural network model to facilitate the structural geometric form selection, which provides a more flexible method for the mutiobjective assessment of the solution space and thus enables designers to obtain different recommended solutions.In the future, it is evident that there is a tendency for designers to combine more advanced technology such as AI and semantic web to facilitate the repetitive and creative work and thus provide more solutions to advise designers in support of sustainable structural design.e challenges that outside structural engineers face include that there is a need for architects to have effective corporation with structural engineers.e ultimate goals of sustainable design can be achieved by efficient information exchange and effective collaboration between structural engineers and architects.A central repository, namely, common data environment, would contribute to the high level of cooperation.In this case, there is a need to have a unified platform that can integrate considerations within a common environment between designers.
e emerging technology, such as semantic web, knowledge graph, and even artificial intelligence, offers the greatest opportunities to achieve sustainable structural design.e fast-growing ontology technology can represent domain knowledge, entities, and their relationships in a variety of ways.Ontology not only enables cross-database search and database interoperability but also provides the means to represent any data formats, including unstructured, semistructured, or structured data, enabling automated reasoning about data.Furthermore, in terms of the participant of a project, the clients should realize the importance of a structural engineer for a sustainable building and should have effective communication with structural engineers.e future legislation and organization also need to offer incentives to motivate structural engineers to consider the environmental performance of structural design.

Conclusions
Amidst the extensive scrutiny worldwide, environmental structural engineers have recently started to contemplate the influence of their outlines in terms of searching for efficient methods of reviewing energy and mechanisms for casting judgements which could compensate for the environmental downsides of their design resolutions.
is significantly alters the outlook of the design industry in establishing building structures as the difficulty with measuring the impact of environmental energy is not simple, particularly when considering the sustainability factors impacting on the building.
is paper presents a state-of-the-art review of sustainable design from all the standards, databases, and tools regarding sustainability in the building design domain for the current practice of sustainable structural design.An extensive modern insight into sustainable structural design, including strategies and indicators, as well as BIM-enabled methodology, is also presented.e contribution from structural engineers in striving for resolute and sustainable objectives is now known, particularly in terms of the advancement of processes to fulfil these aims.Furthermore, the notion of sustainability in connection to structural design has gradually obtained a more comprehensive sentiment, incorporating environmental, social, and financial factors over the process.Regardless of a great deal of efforts made towards streamlining the LCA process, the highly fragmented knowledge and the way of working within the building domain increase the difficulty of the multiobjective structural design (i.e., safety, cost, and environmental impact).
ere is always a priority or tradeoff among these factors.How to balance these parameters remains a challenge.A systematic approach (multiobjective) beginning with the standardised calculation procedure for SSD is essential for practitioners to achieve a sustainable structure and building.
e challenge for achieving a sustainable structure is multiple: from centralisation of different domain knowledge in a common environment to an explicit process that enables efficient and systematic information exchange between designers.e authors anticipate the forthcoming AI and semantic technology together with open BIM as a chance for achieving a holistic sustainable design in the future.

Figure 2 :
Figure 2: Life cycle stage and its influence on sustainability.

Figure 3 :
Figure 3: Life cycles and indictors of sustainable design.

Figure 5 :
Figure 5: Summary of SSD methods with the integration of BIM.

Table 1 :
Summary of sustainable standards and specifications for building design.

Table 2 :
Summary of sustainable databases.

Table 3 :
Summary of the sustainable rating systems for building design (%).

Table 4 :
Summary of SSD strategies and classifications.