Advances in Condensed Matter Physics
Volume 2017 (2017), Article ID 1216867, 4 pages
https://doi.org/10.1155/2017/1216867

Research Article

Geometrically Tunable Transverse Electric Field in Multilayered Structures

Roland H. Tarkhanyan1,2 and Dimitris G. Niarchos¹

¹Institute of Nanoscience and Nanotechnology, NCSR “Demokritos”, Neapoleos & Patriarchou Grigoriou, 15310 Athens, Greece
²Institute of Radiophysics & Electronics, NAS of Armenia, 0203 Ashtarak, Armenia

Correspondence should be addressed to Roland H. Tarkhanyan; rolandtarkhanyan@yahoo.com

Received 4 December 2016; Accepted 6 March 2017; Published 15 March 2017

Academic Editor: Jörg Fink

Copyright © 2017 Roland H. Tarkhanyan and Dimitris G. Niarchos. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

Appearance of a transverse component in dc electric field with respect to the applied current is investigated in periodic multilayer composite structures made of nanometer-to-micrometer scale alternating layers of two different homogeneous and isotropic conducting materials. Dependence of the transverse electric field on geometrical orientation of the layers is examined using the coordinate transformation approach. Electric field bending angle as a function of the layers’ resistivity ratio is studied in detail. It is shown that both the direction and the magnitude of the field can be changed using orientation angle of the layers as a tuning parameter.

1. Introduction

Recent realization of metamaterial devices based on cloaking and concentration effects for a static magnetic field [1–5] became one of the most up-to-date applications of transformation electrodynamics [6–9]. Analogous methods have been widely used to design devices of various type controlling manipulation of heat [10–13], acoustic [14], and material [15] waves. In [16], an analytical design of a multilayered composite structure allowing redirection (bending) of dc magnetic induction vector with respect to the applied external magnetic field has been presented. The aim of this paper is an investigation of dc electric field redirection relative to the direction of the applied electric current in stratified structures. Using coordinate transformation approach analogous to that in [16], we will show the possibility for the appearance of transverse (with respect to the current) component of the field in such a periodic multilayer structure. The ratio of the transverse and longitudinal components is very sensitive to geometrical orientation of the alternating isotropic layers. It means that both the direction and magnitude of the field can be changed using orientation angle of the layers as a tuning parameter. We hope that geometrically tunable anisotropic resistivity in multilayered structures predicted in this paper can find use in various devices based on the control and manipulations of dc electric field.

2. Model and Theory

Consider a periodic multilayer structure consisting of alternating layers of two different materials with isotropic resistivity and , static dielectric permittivity , , and thickness , in micrometer-to-nanometer scale, as both and are much larger than the lattice constant of the constituent components of the medium. The structure in the presence of dc electric current can be considered as an effective anisotropic homogeneous medium (a metamaterial) with electric field vector

where is the applied electric current density, is the effective resistivity tensor, and is the effective conductivity tensor of the composite structure. In the coordinate system with the -axis perpendicular to the plane of the layers, tensor and effective permittivity tensor have the form

where

and is the period of the structure. Note that parallel to the plane of the layers components and are always less than the transverse component

An additional anisotropy in the resistivity and permittivity can be introduced rotating the layers in the structure around the -axis on an angle (see Figure 1). Such a rotation can be realized using coordinate transformations [16]

where is the reference coordinate system fixed to the sample of rectangular parallelepiped form while system of the coordinate axes is connected with the layers which are arranged in the direction perpendicular to the -axis. The angle is assumed to be positive if the rotation is in counterclockwise direction.

Figure 1: Cross section of the multilayer composite in the -plane with layers rotated on angle around the -axis. is the bending angle of dc electric field. The -axis is perpendicular to the plane of the layers.

A static electric field in a source free space is described by Maxwell equations [17]

To keep (5) form-invariant under transformations (4), the effective conductivity and resistivity tensors should be transformed as

respectively, where is the Jacobian transformation matrix

and is the transpose of . Then for the effective resistivity tensor in the coordinate system we obtain

Let the static current of density be applied along the axis. Then from (3a) and (8) one can conclude that the electric field vector inside the composite is bent with respect to on the angle , where

The negative sign in (9) indicates that, for a positive angle , the vector is bending in clockwise direction (see Figure 1). Transversal component of the field is described by

and for a given value of the current density it can easily be tuned by changing the layers’ orientation angle . It is important to note that not only the direction, but also the magnitude of the field is a function of the angle :

Consequently, decreases monotonically with increasing from at to the value at It is easy to see that for any value of , in the range , the absolute value of the bending angle is less than , and that with increasing initially increases from zero and runs up to the maximum value at

given by

and then it decreases monotonically and vanishes at For all possible values of parameter , is always larger than

Note also that the bending angle is an odd function of : It means that using samples with opposite rotated configuration of the layers, we can redirect the electric field vector upwards or downwards with respect to the applied current direction.

The dependence of on the thickness ratio at given values of , , and is analogous to the behavior of the function : increases with increasing , has a maximum at , and then decreases monotonically.

3. Electric Field Vector Redirection Details

For simplicity, we will further restrict ourselves to the consideration of the case when different layers of the structure have the same thickness, that is, when the function has a maximum, and assume that Then (9) can be rewritten in the form

where One can see that at a given value of the angle , the bigger is, the less is (i.e., the larger the contrast between resistivity values of individual layers is). We have to note that this conclusion is true not only at but also for any value of the ratio . Note also that, with decreasing , [see (13)] is shifted monotonically to the higher values while as a function of it has a maximum given by at .

In Figure 2, the dependence of the bending angle on the angle (in degrees) is demonstrated for five different values of the ratio , in the region Note that in the case when the second layer in a periodic unit of the multilayer structure is made from a perfect electrical conductor , the absolute value of the bending angle coincides with the layers’ orientation angle It may be interesting to note also that in the opposite case when one of the layers in the periodic unit is an ideal isolating material , the bending angle has the same absolute value: In both these limiting cases, the parameter

Figure 2: Dependence of the electric field bending angle on the layers’ orientation angle at five different values of the resistivity ratio

4. Conclusions

The possibility of redirection of dc electric field with respect to the applied current is studied in periodic multilayer structures consisting of alternating layers of two isotropic materials with different resistivity values. It is shown that not only the direction but also the magnitude of the field can be changed using the layers’ orientation angle as a tuning parameter.

In this paper, we have found effective resistivity tensor of the composite structure using method of effective anisotropic homogeneous medium. Further, using coordinate transformation approach analogous to that in transformation optics, an analytical expression for the electric field bending angle has been found for arbitrary orientation of the layers with respect to the applied static current. It is shown that both the magnitude and sign of are very sensitive to the orientation of the layers. Dependence of on the layers’ orientation angle is examined in detail for different values of the resistivity ratio. It is shown that with increasing , the absolute value of the bending angle increases from zero and reaches a maximum at (which is always larger than ) and then decreases monotonically and vanishes at Unlike that, with increasing the magnitude of the field decreases monotonically. In two opposite particular cases at which the resistivity ratio , the bending angle For a given value of the thickness ratio and a given orientation of the layers relative to the applied current, the larger the bending angle is the bigger the contrast between resistivity values of the alternating layers is.

The possibility of the tunable field bending in multilayered structures by changing can find widespread applications in various devices based on the control and manipulation of dc electric field such as solar cells, batteries, multilayered thin-film sensors, and flat-panel displays and in computer chips.

Conflicts of Interest

The authors declare that there are no conflicts of interest regarding the publication of this paper.

References

B. Wood and J. B. Pendry, “Metamaterials at zero frequency,” Journal of Physics: Condensed Matter, vol. 19, no. 7, Article ID 076208, 2007.

S. Narayana and Y. Sato, “DC magnetic cloak,” Advanced Materials, vol. 24, no. 1, pp. 71–74, 2012.

F. Gömöry, M. Solovyov, J. Šouc, C. Navau, J. Prat-Camps, and A. Sanchez, “Experimental realization of a magnetic cloak,” Science, vol. 335, no. 6075, pp. 1466–1468, 2012.

J. Prat-Camps, A. Sanchez, and C. Navau, “Superconductor-ferromagnetic metamaterials for magnetic cloaking and concentration,” Superconductor Science and Technology, vol. 26, no. 7, Article ID 074001, 2013.

J. Zhu, W. Jiang, Y. Liu et al., “Three-dimensional magnetic cloak working from d.c. to 250 kHz,” Nature Communications, vol. 6, article 8931, 2015.

J. B. Pendry, D. Schurig, and D. R. Smith, “Controlling electromagnetic fields,” Science, vol. 312, no. 5781, pp. 1780–1782, 2006.

U. Leonhardt, “Optical conformal mapping,” Science, vol. 312, no. 5781, pp. 1777–1780, 2006.

G. W. Milton, M. Briane, and J. R. Willis, “On cloaking for elasticity and physical equations with a transformation invariant form,” New Journal of Physics, vol. 8, article 248, 2006.

U. Leonhardt and T. Philbin, Geometry and Light: The Science of Invisibility, Dover, New York, NY, USA, 2010.

T. Han, T. Yuan, B. Li, and C. W. Qiu, “Homogeneous thermal cloak with constant conductivity and tunable heat localization,” Scientific Reports, vol. 3, article 1593, 2013.

T. Yang, K. P. Vemuri, and P. R. Bandaru, “Experimental evidence for the bending of heat flux in a thermal metamaterial,” Applied Physics Letters, vol. 105, no. 8, Article ID 083908, 2014.

R. H. Tarkhanyan and D. G. Niarchos, “Thermal and electric cloaking effect in concentric composite made of homogeneous bulk and porous semiconductors,” Journal of Electronic Materials, vol. 44, no. 12, pp. 4663–4668, 2015.

P. R. Bandaru, K. P. Vemuri, F. M. Canbazoglu, and R. S. Kapadia, “Layered thermal metamaterials for the directing and harvesting of conductive heat,” AIP Advances, vol. 5, no. 5, Article ID 053403, 2015.

S. A. Cummer, B.-I. Popa, D. Schurig et al., “Scattering theory derivation of a 3D acoustic cloaking shell,” Physical Review Letters, vol. 100, no. 2, Article ID 024301, 2008.

S. Zhang, D. A. Genov, C. Sun, and X. Zhang, “Cloaking of matter waves,” Physical Review Letters, vol. 100, no. 12, 4 pages, 2008.

R. H. Tarkhanyan and D. G. Niarchos, “Re-direction of dc magnetic flux in magnetically isotropic multilayered structures,” Journal of Magnetism and Magnetic Materials, vol. 410, pp. 226–229, 2016.

L. D. Landau, E. M. Lifshitz, and L. P. Pitaevskii, Electrodynamics of Continuous Media, chapter 3, Pergamon Press, 2nd edition, 1984.