Handling Noise in Protein Interaction Networks

Protein-protein interactions (PPIs) can be conveniently represented as networks, allowing the use of graph theory for their study. Network topology studies may reveal patterns associated with specific organisms. Here, we propose a new methodology to denoise PPI networks and predict missing links solely based on the network topology, the organization measurement (OM) method. The OM methodology was applied in the denoising of the PPI networks of two Saccharomyces cerevisiae datasets (Yeast and CS2007) and one Homo sapiens dataset (Human). To evaluate the denoising capabilities of the OM methodology, two strategies were applied. The first strategy compared its application in random networks and in the reference set networks, while the second strategy perturbed the networks with the gradual random addition and removal of edges. The application of the OM methodology to the Yeast and Human reference sets achieved an AUC of 0.95 and 0.87, in Yeast and Human networks, respectively. The random removal of 80% of the Yeast and Human reference set interactions resulted in an AUC of 0.71 and 0.62, whereas the random addition of 80% interactions resulted in an AUC of 0.75 and 0.72, respectively. Applying the OM methodology to the CS2007 dataset yields an AUC of 0.99. We also perturbed the network of the CS2007 dataset by randomly inserting and removing edges in the same proportions previously described. The false positives identified and removed from the network varied from 97%, when inserting 20% more edges, to 89%, when 80% more edges were inserted. The true positives identified and inserted in the network varied from 95%, when removing 20% of the edges, to 40%, after the random deletion of 80% edges. The OM methodology is sensitive to the topological structure of the biological networks. The obtained results suggest that the present approach can efficiently be used to denoise PPI networks.


Introduction
Proteins are central players in every organism, as they are required for virtually every single cellular function. However, proteins are required to interact with one another to fulfill their functions. For this reason, disease states may appear, if the physiological interaction between two proteins is disrupted [1].
Protein-protein interaction (PPI) networks are a subset of complex biological networks that have specific topological properties, such as a high clustering coefficient, the presence of hierarchy, heterogeneity, and a power-law-like degree distribution [2]. e guilt-by-association hypothesis states that two proteins sharing many interactive neighbours are likely to hold functional homogeneity and localization coherence [3]. ese characteristics suggest that the network topology alone may be a viable option for PPI network denoising. PPI network denoising corresponds to find interactions that do not exist and to find missing interactions. Methods to determine protein interactions are not accurate and organisms are not yet fully known, being important to denoise PPI networks to have more precise models of the organisms.
Protein interactions can be represented as graphs, allowing the use of graph theory in their study. As such, different methods were developed to denoise biological networks (reviewed in [4]).
An approach called nonconvex semantic embedding (NCSE) evaluates the reliability of interactions in a PPI network trying to learn a Euclidean embedding under the geometric assumption of PPI networks [19], and it was tested in three datasets of Yeast Saccharomyces cerevisiae. Computational methods based on machine learning were also applied to evaluate the reliability of PPIs, and it was tested in Yeast and Helicobacter pylori PPI datasets [20,21].
In a recent study, Lü et al. [22] proposed the structural consistency index and the structural perturbation method (SPM). On the one hand, the structural consistency index can reflect the inherent link predictability of a network without knowing its organization a priori, allowing to estimate the explicability of the organization of a network and to supervise mechanistic changes during the evolution of the network. On the other hand, the SPM performs link prediction by removing a percentage of the edges in a network, thus perturbing the remaining network by that percentage.
is is based on the strong correlation between independent network perturbations, which suggests that the missing edges, i.e., false negative (FN) interactions, can be identified by perturbing the networks with an additional set of known interactions, i.e., true positive (TP) interactions.
Luo et al. [4] proposed the collaborative filtering-enhanced topology-based (CFT) method to perform protein interatomic mapping on sparse high-throughput screening (HTS) PPI data since the performance of the network topology-based approach usually deteriorates when using sparse network data. is approach is based on the notion that the solution space of the interatomic mapping and the solution space of the personalized recommendations are similar. Each protein is represented as a feature vector that describes their interactions in the network. In addition, the feature vector is used to calculate the corresponding similarity vector that represents the interactions through the functional similarity weight, creating an interneighbourhood similarity (I-Sim) for modelling PPIs. Functional parameters for each protein in the dataset are obtained from gene ontology (GO), allowing the use of functional similarity measures. Denoising of the input HTS-PPI data is performed via the integration of saturation-based strategies into the I-Sim, achieving a precise relationship model. eir method was applied to three different datasets and compared with three other algorithms (interaction generality [14], Czekanowski-Dice distance [15], and functional similarity weight [16]), showing better performance on large, sparse HTS-PPI datasets. Since they use GO annotations to characterize their proteins, this approach is likely to underperform when considering less-studied organisms.
A different strategy termed "intrinsic geometry structure" (IGS) was proposed by Fang et al. [23]. e IGS is a geometry-based approach which uses heat diffusion in the PPI network to collect structural information about all paths connecting two given nodes, thus defining intrinsic relationships among them. ey use a maximum likelihoodbased algorithm to determine the optimal dissipation time, predicting the global structure of the PPI network from the local structure. After performing heat diffusion for the optimal dissipation time, the intrinsic geometric structure of the PPI network is revealed. One of the main advantages of the IGS method is its robustness against missing protein associations and sparse PPI data. eir method was tested with the S. cerevisiae (CS2007) network [24], a network of the bottlenose dolphin community [25], and a network of known terrorist cells [26]. In addition, they compared the performance of the IGS with that of two other methods, the multidimensional scaling-based (MDS) method [27] and the hierarchical random graph (HRG) method [28], showing that the IGS performed slightly better than MDS when tested with the CS2007 dataset and better than the IGS and HRG for the other datasets tested. eir analysis was based only on the area under the receiver-operating characteristic (ROC) curve (AUC) values.
Among the described works, the MDS method proposed by Kuchaiev et al. [27] is the only one relying on the PPI network topology that was applied in a Homo sapiens PPI dataset. To address the sparsity problem of the networks, Luo et al. [4] used collaborative filtering, but the method was not tested on perturbed networks, i.e., when random noise was added. e IGS method [23] was compared to the MDS method using the Yeast Saccharomyces cerevisiae PPI dataset, and both methods were tested on perturbed networks with the same percentages (from 10% till 80%). However, they were not able to determine which of the edges recovered belong to the removed group, or which of the edges removed are then recovered.
In this paper, we introduce the organization measurement (OM) method to denoise PPI networks based exclusively on the network topology. Topological measures are used to find trends that characterize interacting and noninteracting protein distributions. A high-confidence set of protein interactions is used to construct a network, followed by the calculation of the weights of interactions and noninteractions in the network. e OM weighted matrix is obtained and used to find distribution trends that allow to distinguish interaction distributions from noninteraction distributions.
e OM threshold value that better distinguishes these types of distributions is then used to identify false positive (FP) interactions and FN (novel) interactions.
is way, an OM topological model is built to be used in the denoising of a network, resulting in a better approximation of the expected network.

Materials and Methods
is section will describe how we obtained the datasets used in the experiments and the topological measures used with the organization measurement (OM) methodology, including the new neighbourhood clustering (NC) proposed measure. It will also describe the OM methodology, how to obtain the OM matrix of weights, and how to determine the threshold value, giving a description of the OM methodology pipeline ( Figure 1) to denoise networks.
For each organism, we collected a set of high-confidence PPIs. Although these PPIs do not reflect the entirety of the protein interaction networks of the selected organisms, they were used to construct the known PPI network of each organism, i.e., their reference sets.
In the application of the OM methodology, various topological measures were calculated to characterize these networks, based on the assumption that these measures will allow the identification of topologic patterns to support network denoising. In this paper, we use the term "denoising" to define the identification of FP and FN interactions, removing the former cases from the network while adding the latter. e methodology proposed here can also be used to rank the level of confidence of the interactions already presented in the network. Different topological measures can identify different patterns, and thus, here we consider that different topological measures can contribute to the denoising process. Section 2 will describe in a detailed way the OM methodology pipeline, with the description of the datasets chosen to illustrate and validate the proposed methodology in Section 2.1 and the description of the topological measures used to test the OM methodology in Section 2.2, including a new topological measure proposed. Section 2.3 will explain the process to obtain the weighted OM matrix from the adjacency matrix, Section 2.4 will describe how to determine the OM THR value using the ROC curve, and Section 2.5 will describe how to use the threshold in the denoising of PPI networks.

Datasets.
e Search Tool for the Retrieval of Interacting Genes/Proteins (STRING) database [29] contains known and predicted protein interactions of various organisms. PPIs in STRING are derived from five main sources: (1) genomic context predictions, (2) highthroughput experimental methods, (3) conserved coexpression experiments, (4) automated text mining, and (5) previous knowledge from third-party databases. Each interaction in STRING has an associated score for each prediction method and has a combined score (CS) that ranges from 0 to 1000, indicating the degree of confidence of each interaction. Calculation of the CS considers several parameters, such as the number and the quality of different sources, indicating that a PPI occurs. e interactions derived by experimental methods with a score greater than 900 have been considered to have high confidence in multiple works [30,31]. erefore, the reference sets used in this work comprise experimentally determined PPI data obtained from STRING with a score greater than or equal to 900. ese data were collected from two different organisms, namely, Yeast Saccharomyces cerevisiae (Yeast) and Homo sapiens (Human) [29]. Using these data, an undirected network is constructed for each organism and the main component is extracted. Table 1 summarizes the characteristics of the reference set networks obtained for Yeast and Human, including the number of nodes, the number of edges, the average degree, and the network density. e observed average degree and density values are highly suggestive that these biological networks are sparse, i.e., they have much less edges than the complete network with the same set of nodes. Our highconfidence networks (i.e., PPIs obtained from the STRING database with an experimental source score greater than 900) comprised 29,319 interactions between 3,937 proteins for the Yeast dataset and 16,931 interactions between 4,943 proteins for the Human dataset.
Additionally, we used a high-confidence external dataset compiled by Collins et al. [24] and referred to as CS2007 hereafter, to compare the proposed methodology with other topology-based denoising methods [23,27,32]. is dataset comprises 9,074 PPIs between 1,622 unique proteins from Yeast Saccharomyces cerevisiae. To ensure a direct comparison between the OM methodology and the existing methods, we followed their approaches and only used the largest connected component. e largest connected component of the dataset compiled by Collins et al. [24] includes 8,323 interactions between 1,004 proteins (Table 1).

Measures for Similarity and Diversity Analysis of Network
Data. Protein interactions can be conveniently modelled as a network, where each node represents a protein and each edge represents an association between two proteins. e most commonly used technique to quantify the interaction profile similarity of protein interaction networks (or any type of biological network) relies on association indices. Fuxman Bass et al. [33] performed a comprehensive review on the selection of association indices for the analysis of gene similarity. In their work, the Jaccard (JC), geometric, and cosine indices were shown to be the most versatile; although not excelling in any particular task, their strengths were the most balanced out of all evaluated measures. A review of similarity indices can also be found in [34]. Simone et al. tested the application of different association indexes in bipartite networks [35].
A more recent study reports that the JC measure performs better than three other measures in a specific model [36].
e JC measure is defined as the ratio of the intersection of the number of neighbours of nodes i and j to their union (i.e., the ratio of nodes shared between i and j to the total number of nodes connected to both): where Γ(i) is the set of neighbours of i. We also explored and tested additional measures, and two of them that gave good results were betweenness (BETW) and Katz indices. e implementation of the betweeness (BETW) index used was where in which V is the set of nodes, nsp(l, m) is the number of (l, m) shortest paths, and nsp(l, m | i) is the number of those paths passing through the node i. e implementation of the Katz index used was where Adj is the adjacency matrix of the network with eigenvalues λ. α � 1/λ max and β � 0, when Katz centrality is the same as the eigenvector centrality. Based on the idea that closely associated proteins are more likely to interact, that the network modularity is associated with the clustering coefficient (CC) [37], and that a high mean CC of a community can be used to identify those that are functionally homogeneous [38], we implemented a novel measure to emphasize the relevance of the CC concept associated with the neighbourhood concept in a network.
is measure was called the neighbourhood clustering (NC) measure and is defined as the ratio of the sum of the CC of the nodes shared between i and j to the   Figure 1: Diagram of the OM methodology pipeline. A Reference Set of an organism is used to create a network model, and the respective OM matrix is obtained, using the topological properties. e threshold (OM THR) is calculated using the ROC curve and choosing the value that best separates interaction distributions from noninteraction distributions. e OM THR is then applied to denoise a lower-confidence Data Set network of the same organism, using the respective OM matrix.
sum of the CC of the total number of nodes connected to both i and j: where Γ(i) is the set of neighbours of i.

Organization Measurement Matrix.
In Figure 1, we summarize the pipeline of the proposed OM methodology. Once the PPI network (Reference Set) for the organism is constructed, its respective adjacency matrix is built, followed by its transformation into a weighed matrix, the OM matrix. e OM matrix is used to find distribution trends that allow to distinguish between interactions and noninteractions. e weights for interactions and noninteractions are calculated using topological measures and using the information about the interactions of the network. e adjacency matrix of the PPI network A, with N proteins and M interactions, is defined as adj in A, calculated using the topological properties of the network. e weight a w (i, j) represents the strength value of the edge (i, j) per the topological measure used and aims to capture patterns associated with the network that can develop signatures that identify the PPI network of each organism. is weight was used to characterize interaction and noninteraction distributions of the PPI network to determine the separation border between them.

Organization Measurement reshold Value Determination.
One of the assumptions made in this work is that the PPIs in the reference datasets are true. is assumption can be made because of the sparsity of protein interaction networks and the rigorous criteria chosen to filter TP interactions. However, the same cannot be said for the noninteractions, as the presence of the FN PPI is highly likely. e value that best distinguishes both interaction and noninteraction distributions was called the OM threshold value. First, we collect protein interaction data of a specific organism, and then a network is built (Figure 1). Next, the respective adjacency matrix is constructed, followed by its transformation into a weighted matrix, the OM matrix, using the topological measures of interest. Finally, the ROC curve is calculated and used to determine the optimal cutoff, corresponding to the threshold value that separates the interaction distributions from noninteraction distributions. We considered as the optimal cut the point closest to (0,1) in the ROC curve, where sensitivity equals specificity. Different topological measures were tested, and the respective cutoff values were determined. e outcomes of these experiments are described in Results and Discussion.

Organization Measurement Methodology to Find Spurious and New
Interactions. An accepted assumption in network topology-based approaches is that interacting proteins in a local community and closer to one another in the network are most likely involved in similar functions, or part of the same pathways [39][40][41]. e use of topological measures that capture this information should be prioritized, as they are expected to better grasp patterns in incomplete networks, thus allowing the approximation of incomplete input networks to the real networks.
From each reference set (Reference Set) PPI network, we calculated its adjacency matrix. en, after calculating the respective weights, the adjacency matrix is transformed into a weighted matrix. Finally, the threshold that best separates PPIs and non-PPIs was determined through finding the optimal cutoff of the ROC curve. is threshold was applied to detect spurious and missing PPIs in the network (Data Set), to obtain a better approximation of the true network. In the example network shown in Figure 1, there are five nodes representing five different proteins, in addition to six edges that could represent the interactions between them (Data Set). Assuming the example network approximates the current knowledge on a given biological network, not all true interactions are represented and the existence of the FP is expected. Once the threshold value is calculated, using the reference set (Reference Set), it is applied to the OM matrix of the Data Set, to identify FP and FN interactions. FP interactions are then removed from the network, whereas FN interactions are added.

Results and Discussion
e OM methodology was tested with different topological measures and was evaluated using three different scenarios.
e following sections will describe the results obtained with the experiments made.

Analysis of Different Topological Measures to Identify the Optimal reshold Value.
A key component of the proposed method is the determination of the threshold value to discriminate between protein interaction and nonprotein interaction distributions. As such, we decided to test the OM methodology with different topological measures to determine which better discriminates PPI from non-PPI. e four topological measures used were the JC measure, the BETW measure, the Katz measure, and the proposed new measure, the NC measure. Figure 2 shows the ROC curves when using this methodology with four different topological measures for the Yeast and Human organisms, and Figure 3 shows the same information, but after data normalization between 0 and 1. Table 2 shows the respective AUC values obtained. Best results were achieved when using the OM methodology with the JC and NC measures.
In addition to testing the OM methodology with these measures, we calculated the cutoff values for both the optimal cut and the accuracy cut, using the JC and NC measures, those that previously gave better results. e optimal cut calculates the point closest to (0,1) in the ROC   curve, where sensitivity equals specificity, whereas the accuracy cut calculates the maximum accuracy and the respective cutoff value. In the following experiments, to determine the OM THR, we calculated the cutoff values for the optimal cut, obtaining good results. Tables 3 and 4 show the obtained results for the Yeast and Human organisms. We can observe that the NC measure gave a slightly better result than JC, and so we will describe further the experiments using the NC measure.

Evaluation of the Organization Measurement Methodology in Different Scenarios.
To assess whether the OM methodology is sensitive to the network topology, we applied it to a randomly generated protein network, with the same number of nodes and edges as its respective reference sets (for Yeast and Human). If the OM methodology can distinguish between interactions and noninteractions in the reference datasets but fails to do so in the random networks, one can assume that it captures the inherent topological structure of a real network.
To further evaluate the performance of the OM methodology, two other experiments were performed. First, while maintaining the same number of nodes (proteins), we randomly added incrementing percentages of edges (protein interactions), 20%, 40%, 60%, and 80%, not belonging to the reference set network, building four networks, and removed the same percentages of edges from the reference set network, building four more networks.
is was performed for the Yeast, Human, and CS2007 reference set networks. After each addition or removal, we used the OM methodology to denoise the networks. To further assess the ability of the proposed methodology for network denoising, we also determined the percentage of inserted TN removed from the respective CS2007 perturbed networks and the percentage of TP retrieved from the respective CS2007 perturbed networks. A thorough description of the results of these experiments is shown in the following sections.

Organization Measurement Methodology Performance Comparison: Random Network versus Reference Set Network.
e only criterion selected to generate the random networks was that the resulting randomize networks were required to comprise the same number of nodes and edges. us, we generated 10 networks for each organism to be tested using the NC measure. Figure 4 shows the ROC curves, the curves for the separation of classes (PPI and non-PPI), and the accuracy curve, when applying the OM methodology with the NC topological measure to one of the Yeast (Figure 4(a)) and Human (Figure 4(b)) random networks generated with the same number of nodes and edges as the respective reference sets. Analysing their ROC curves, we can see a clear distinction in performance between the application of the OM methodology to the random network ( Figure 4) and the subsets of the real networks ( Figure 2). e AUC obtained after using the proposed method in all 10 random networks generated was close to 0.5 for both organisms (Yeast and Human), while for the subsets of the Yeast network and Human network, the AUC was 0.9534 and 0.8708, respectively.

Random Insertion of Edges.
To evaluate the performance of the OM methodology for denoising PPI networks, we perturbed the networks of the reference sets by randomly adding incrementing percentages of edges to the networks of the Yeast and Human reference sets and the CS2007 reference set.
We created four noisy networks for each dataset, adding 20% more edges to the original network, followed by 40%, 60%, and 80%. ese intervals were selected following the research conducted by Fang et al. [23]. Figure 5 shows the ROC curves when the OM methodology is applied to the networks of the Yeast and Human reference sets and to the four noisy networks generated from each of them. We can observe a decrease in performance when we increase the percentage of the random edges added.
To be able to compare the performance of the OM methodology with that of other network-based methodologies proposed by other researchers, we also perturbed the CS2007 network by randomly inserting edges in the same proportions previously described. Figure 6 shows the graphical representation of the resulting AUC values when the OM methodology is applied to the four noisy networks obtained from the CS2007 network and when MDS and IGS methodologies are applied [23]. It can be observed that the proposed OM methodology outperforms MDS and IGS methodologies.
After denoising the networks with the OM methodology, we also calculated the percentage of FP interactions that were removed (Table 5). We observe that the OM methodology could remove 97% of the FP of the 20% added edges and 89% of the FP of the 80% added edges.

Random Deletion of Edges.
To evaluate the performance of the OM methodology for the identification of missing interactions, four new networks were created for each dataset (i.e., Yeast, Human, and CS2007 reference sets) by removing increasing percentages of edges from the respective reference set networks. Edge removal was performed in the same proportion as edge addition: 20%, 40%, 60%, and 80%. By removing increasing percentages of edges from the respective reference set networks, we are creating smaller sparse networks and at the same time deteriorating their inherent structure. e results are shown in Figure 7, presenting the ROC curves, when the OM methodology is applied to the eight noisy networks referred previously, of the Yeast and Human reference set networks.
ese results show a scenario alike the one observed after randomly adding edges, as greater reductions in the number of edges result in greater performance drops, but the performance drops are steeper in the Human organism. Figure 8 shows a graphic of the AUC values, when the OM methodology is applied to the four noisy networks obtained from the CS2007 network, referred previously, compared to the MDS and IGS methodologies [23]. e OM methodology has a better performance compared to the IGS   and MDS methodologies, except when 80% of the interactions is removed from the CS2007 reference set, where the application of the IGS gives better results. Further details are shown in Table 6, where we can observe that 95% of the TP removed could be detected when the OM methodology is applied to the perturbed network, when 20% of the interactions of the reference set was removed, and 40% could be detected when 80% was removed.

Analysis
Different topological measures were used to identify the optimal threshold, with the Yeast and Human reference sets; comparative testing showed (Figures 2 and 3 and Table 2) that the best results were obtained using the JC and the NC measures, and thus, we decided to use both in some experiments of this work. JC is a widely known measure frequently used in network denoising and missing link prediction. It also considers the neighbourhood information, which is aligned with the "guilt-by-association" principle. e same applies to the NC index, proposed herein, where the concept of the CC is also taken into account.
e OM methodology was then applied to the Yeast and Human datasets, using the JC and the NC measures and after analysing Tables 3 and 4, where the AUC values and the cutoff values for both the optimal cut and the accuracy cut for the Yeast and Human reference sets obtained are shown; it can be seen that the NC measure performed better than the JC measure at discriminating between protein interactions and noninteractions, and for this reason, the NC measure was used in the evaluation of the OM methodology. ree different scenarios were considered to evaluate the OM methodology. e first one uses randomly generated protein networks, with the same number of nodes and edges as their respective reference sets (Yeast and Human). Observing Figure 4, we can see that the AUC, obtained when applying the OM methodology to one of the random networks, was close to 0.5 for both organisms (Yeast and Human), while for the Yeast and Human reference sets, the AUC was 0.9534 and 0.8708, respectively (Figure 2), which shows that OM is sensitive to the inherent topological structure of a real network. ese results show that the OM methodology cannot distinguish between interactions and noninteractions in random networks but can capture the inherent rules of biological networks, not present in random networks. e second scenario used to evaluate the performance of the OM methodology consists in applying OM to networks obtained from the two Yeast and Human reference sets, where the number of nodes (proteins) was maintained, but where a random percentage of edges (proteins interactions), 20%, 40%, 60%, and 80%, not belonging to the reference set network, was added, and the third scenario is similar to the second but instead of adding, the same random percentages of edges were removed from the reference set network.
In the second scenario (random insertion of edges), as expected, greater increments of random edges resulted in greater performance reductions ( Figure 5). e performance reductions were steeper in Human, which could be attributed to one major reason: the percentage of FN is most likely greater in the Human interactome than in the Yeast interactome. us, it could be argued that the Yeast reference set is a more reliable, better representation of the actual Yeast interactome, than the Human reference set is of the real Human interactome. When we add these percentages of random edges, the inherent structure of these biological networks becomes deteriorated because we are probably adding TN.
In the third scenario (random deletion of edges), greater reductions in the number of edges result in greater performance drops compared to the second scenario, but the performance drops are steeper in the Human organism ( Figure 7). is could be explained by the fact that we are removing TP from both networks. However, since the Yeast network seems to be a closer representation of its true  Figure 6: Application of the OM methodology with the NC topological measure, when an increasing percentage of edges was added randomly to the CS2007 reference set network compared to the MDS and IGS methods. AUC values of the 4 CS2007 perturbed networks when 20%, 40%, 60%, and 80% of random edges were added to the reference set networks, using OM, IGS, and MDS methods. network than the Human network, the accentuated deterioration in the structure of the Human network could explain this behaviour. So, when comparing the results between edge addition and edge removal in Yeast and Human reference sets ( Figures 5 and 7), we witness that the overall performance reductions were quite dissimilar. Adding just 20% more edges contributed to a reduction of approximately 0.08 in AUC for Yeast and 0.06 AUC for Human. Further addition of edges beyond this point did not decrease the AUC sharply. Contrarily, after removing 20% of the existing edges, the AUC decreased by roughly 0.02 for both Yeast and Human, with greater performance drops after each percentage of edge removal. e better performance observed for the Yeast interactome could be explained by its smaller size compared to the Human interactome, in addition to being relatively well studied, meaning that input data quality plays an important role in the performance of computational methods. Additionally, the negative impact on performance observed after randomly adding edges suggests that the OM methodology is very sensitive to high percentages of FP and FN.
To compare the performance of the OM methodology with that of other network-based methodologies proposed by other researchers, the CS2007 network reference set was perturbed by randomly inserting edges in the same proportions previously described in scenario 2 and by randomly deleting edges in the same proportions previously described in scenario 3. e OM methodology was compared to the MDS and IGS methodologies [23]. Figures 6 and 8 Figure 7: Application of the OM methodology with the NC topological measure, when an increasing percentage of edges is removed randomly from the Yeast and Human reference set networks. ROC curves of the reference set and the other 8 networks when 20%, 40%, 60%, and 80% of edges were removed from the reference set networks for Yeast (a) and Human (b).  Figure 8: Application of the OM methodology with the NC topological measure, when an increasing percentage of edges was removed randomly from the CS2007 reference set network. AUC values of the 4 CS2007 perturbed networks when 20%, 40%, 60%, and 80% of edges were removed from the reference set networks, using OM, IGS, and MDS methods. dataset, and a general improvement in the performance can be seen when the OM methodology is applied compared to the MDS and IGS methodologies. When 80% of random TP of network interactions is removed, the AUC of the IGS is superior to the AUC of OM and MDS. is could not mean, in this case, that OM is worst since removing 80% of the TP makes the model very close to a random network and a denoising method, for consistency, should not be able to detect the structure in such networks. Further analysis was conducted for these last networks with added random percentages of FP interactions. e OM methodology was applied, and the percentage of FP interactions removed was calculated (Table 5). Interestingly, most of the randomly inserted FP interactions were promptly identified, even when the network was heavily perturbed, with 89% of the FP removed after contaminating the network with 6,658 random interactions. ese results suggest that the OM methodology can indeed capture the inherent topology of biological networks. Interestingly, we observed that the number of TP interactions identified after randomly removing edges from the CS2007 dataset plummets after removing 60% of TP (Table 6). Still, the OM methodology seems to identify most missing links up to that point. ese findings suggest that the OM methodology can assess whether the topological structure of a network is according to the characteristic topology of biological networks.
e OM methodology could still work well in lessstudied interactomes, when the subset of the interactome of interest is a representative sample of the structure of the entire interactome, meaning that the percentage of FP and FN cannot hide the inherent structure behind the biological networks of the organisms.

Conclusions
Currently, low-throughput experimental methods are the only effective way to validate protein interactions. While high-throughput experimental methods to obtain PPIs exist, the obtained results have very high noise. As such, computational methods are required to speed up data acquisition and to reduce the data contamination. Methods relying exclusively on the topology of biological networks are simpler and faster as it appears that the network topology may reveal patterns or signatures associated with the kind of organism and the type of interactions. If we can use, effectively, only the topology to denoise biological networks, we have a simple computational method suitable for incomplete interactomes, without the need for extra biological knowledge.
is paper introduced the OM methodology for denoising biological networks, a methodology that (a) uses exclusively the topology of the network, (b) enables, easily, to separate the distributions of interaction and noninteraction proteins in PPI networks, (c) does not use known distributions as approximations, and (d) provides a topological way of detecting FP interactions and finding new interactions. e main innovation of the OM methodology is related to its ability to combine the advantages of using exclusively the topology without taking approximations of known distributions and without using external knowledge to detect interactions that do not exist or to find new interactions with a better performance than some documented used methodologies.
is paper also introduced a new network topologic measure, the NC measure, which is used with the OM methodology and yielded better results, compared to other known and current topological measures. e OM methodology can be explored in the future by applying it in networks belonging to other domains, where there is an inherent structure, to predict new interactions and eliminate spurious interactions.
Data Availability e datasets supporting the conclusions of this article are available in the Bioinformatics Repository of the University of Aveiro, at http://bioinformatics.ua.pt/software/OM.

Conflicts of Interest
e authors declare no conflicts of interest.