Internet of Things Task Migration Algorithm under Edge Computing in the Design of English Translation Theory and Teaching Practice Courses

This study aims to improve the quality of English teaching in contemporary colleges and universities, so as to cultivate more English translation talents. Taking corpus, English translation, and teaching practice as the main research horizons, this study analyzes the application of master of translation and interpreting (MTI) course design, English translation, and task migration by combining the task migration algorithm under Internet of Things (IoT) with the self-built corpus, so as to realize the cultivation of translation talents and design of teaching practice. A translation corpus is constructed, a two-way interactive online course is designed, and the experimental results of the complete local migration algorithm (CLM algorithm), random migration algorithm (RM algorithm), and greedy heuristic migration algorithm (GHM algorithm) used in English teaching practice courses are analyzed and compared. The experimental simulation results reveal that the GHM algorithm proposed in this study shows good system stability, its duration is 60% better than that of the CLM algorithm, and its system throughput is increased by 50% compared with the CLM algorithm. In addition, the maximum delay time has little effect on the system throughput. When the system time slot length is fixed at 20 ms, the user migration rate of the genetic algorithm is the highest under the different total numbers of users. In addition, in view of the wide application of neural network in English translation teaching, this study establishes an English translation evaluation model based on the combination of particle swarm optimization (PSO) algorithm and neural network and compares it with the traditional neural network model in simulation experiments. The results show that the addition of PSO algorithm can effectively improve the convergence speed of artificial neural network (ANN), reduce the training time of the model, and improve the accuracy of the ANN network. Using the PSO algorithm to train the neural network, the optimal solutions of different particle swarms can be obtained, and the error is small. The PSO-ANNs model can promote the quality of English translation teaching and improve the English translation ability of the students. Therefore, applying the task transfer algorithm and PSO algorithm to the practice of English translation teaching has greatly improved the efficiency of the English classroom. To sum up, this study provides new ideas for the curriculum design of contemporary college English teaching and has reference value for the cultivation of college English translation talents.


Introduction
With the development of today's economic globalization, the professionalization of the ancient profession of translation is getting higher and higher. Translation services belonging to the language service industry, such as professional document translation, interpretation and conference translation, editing and typesetting, multimedia translation and production, website and software localization, and language service outsourcing, have gradually entered the business scope of translation companies. e standardization and institutionalization of translation project management, translation customer service, and translation quality monitoring are also getting higher and higher, with obvious service industry characteristics and increasingly clear professional requirements. is requires employees in this industry to have special professional qualities, abide by professional ethics, understand professional characteristics, and possess professional abilities and qualifications. Of course, they also need industry associations and other organizations to formulate industry standards and practice rules, establish access mechanisms, and carry out training. e most important teaching goal for English teaching in contemporary colleges and universities is improving the translation ability and translation cognitive ability of students [1]. Translation-related teaching theories can not only improve the quality of English teaching but also lay a reliable foundation for the overall development of quality education, which is the essential way to quality education [2]. erefore, a complete translation research theory has been formed in the current teaching system, bringing together various translation skills and strategies required in the translation process, which is the theory summed up by many scholars after countless practice. It can not only help students find the laws in translation learning and solve high-frequency problems in translation but also provide efficient guidance for translation practice of students [3]. e student who wants to upgrade his translation ability has to start from the theoretical basis of translation. For teachers, English translation can help them arouse the learning interest of students and guide them to learn more deeply [4]. In English teaching, the proficiency of using translation theory represents the English translation ability of students or teachers to a certain degree [5]. e choice of translation theory teaching content is based on the teaching objectives of English translation theory. Only clear teaching objectives can be integrated into the classroom in actual teaching work [6]. e main goal of college translation theory in English teaching is enlightening the translation learning of students, so that they can learn subjectively and independently, and then applying the learned translation theory knowledge in actual life and work, forming a virtuous circle of improving their translation ability [7]. In English class, teachers still tend to adopt the traditional teaching plan, which requires assigning the translation task to the students, and wait until the students complete the task before commenting on it in the classroom [8]. Generally, there is a long-time interval between the completion of the homework by the students and the explanation by the teacher. us, the students will not get timely feedback information, the motivation of learning will decrease, and the quality of learning will only decrease. In addition, this traditional teaching mode and classroom interaction methods are very single, and the classroom atmosphere is boring and depressing, which often reduces students' interest in learning to a large extent [9]. Such problem can be effectively solved through online classes. e resources of the cloud data center are distributed near the mobile terminal, and the multiaccess edge computing (MEC) platform is built to manage the computing and storage resources together. On the contrary, mobile terminal equipment migrates computing, storage, and other functions to the MEC platform to solve insufficient computing power, which is the principle of edge computing [10]. English translation teaching theory and edge computing are combined, and the mobile edge technology is applied to existing English teaching, providing valuable research ideas for current English teaching [11]. In recent years, the English translation model based on artificial intelligence (AI) has been a hot research topic. e researchers established a learning ability analysis model by collecting a large amount of learning data and used the model to analyze the characteristics of English translation. At present, edge computing algorithms and neural network algorithms are widely used in teaching. Wu and Song (2020) [12] analyzed the challenges of video distribution based on edge computing from three aspects of edge computing, storage, and network resources for the distribution of teaching surveillance videos; then, a teaching surveillance video content distribution framework based on the storage and computing power of network edge computing is proposed. Sun (2020) [13] proposed a system resource allocation method based on power iteration, which takes the throughput of the offloading process as the objective function and achieves the optimal allocation of normal power through iterative optimization.
e results show that the method is effective and useful. Bao and Yu (2021) [14] proposed an online and offline hybrid teaching quality evaluation method based on mobile edge computing to strengthen the online and offline hybrid teaching of sports. erefore, one of the innovations of this study is to use the IoT task migration algorithm under edge computing to study English translation theory and design teaching practice courses. ey designed a two-way interactive online course and provided a comprehensive review of complete local migration (CLM), random migration (RM), and greedy heuristic migration (GHM) in English teaching practice. e experimental results were analyzed and compared. In addition, with the continuous development of algorithms and artificial intelligence, various algorithms are also applied to teaching. Sun and Wang (2020) [15] applied the PSO algorithm and neural network to English teaching, and the results showed that this model can improve the quality of English translation teaching, making teaching and learning a win-win situation. Olguín et al. (2018) [16] proposed a new method for measuring the efficiency of machine translation based on evolutionary algorithms and used the translation accuracy of English text sets to Spanish texts as a simulation benchmark and explored the reverse process. e results show that the PSO algorithm can be used for the translation of multilingual sentences with only one identifier. Another innovation of this study is to establish an English translation evaluation model based on PSO algorithm and neural network and select real teaching samples to test the model to verify the feasibility of the model.
It is known from the current research that most of the studies of English corpus development and the master of translation and interpretation (MTI) discipline focus on one aspect rather than combining them. erefore, the work of this study is mainly divided into two parts. e first part is the combination of task transfer algorithm under the IoT and self-built corpus. e application of curriculum design, English translation, and task transfer for the master of translation and interpretation (MTI) is analyzed, so as to realize the cultivation of translation talents and the design of teaching practice. en, a translation corpus is constructed, and a two-way interactive online course is designed. In the second part, the PSO algorithm is combined with ANNs to establish an English translation evaluation model based on PSO-ANNs. e contribution of this study is reflected in the research of English translation teaching practice, corpus construction method, and task transfer algorithm technology. It constructs an English-Chinese/Chinese-English bilingual translation corpus and designs a two-way interactive online English translation course combined with the systematic task transfer algorithm in the MEC scenario. Compared with the completely local transfer algorithm and the random transfer algorithm, the greedy heuristic transfer algorithm proposed in this study has higher performance in English teaching practice courses. e innovation of this study can be summarized as two points. e first point is to use the IoT task migration algorithm under edge computing to study English translation theory and design teaching practice courses. e second point is to establish an English translation evaluation model based on the PSO algorithm and neural network.

English Translation and Teaching
Practice. In recent years, the increasing frequency of international exchanges and the continuous improvement of tourism policies have promoted the sustainable and rapid development of China's tourism industry. e application of technologies such as big data, cloud computing, and the IoT has also spawned smart tourism. With the rapid progression of international tourism, the translation and translation talents have gradually become imperative [17]. e information delivery with appropriate time, appropriate content, and appropriate channels is critical to enhancing the experience of inbound international friends [18]. e corpus is one of the powerful platforms which provides effective information. e combination of corpus and translation is of great help to the cultivation of MTI translation talents and the design of teaching practice [19]. According to the language type of the collected data, the corpus is classified into a monolingual corpus and a bilingual or multilingual corpus. e former uses only one corpus and collects many language examples of native speakers, while the latter is a corpus composed of two or more language texts, with corresponding or parallel forms, analogous forms, and translation forms [20].
As an analog corpus, the monolingual corpus is often ignored in the parallel text research [21]. e construction of a Chinese-English monolingual corpus can support MTI students' simulated text and data research translation texts as well as authoritative reference source and target languages in terms of talent training. A high-quality monolingual corpus provides a large number of illustrations for MTI classroom teaching in teaching practice, which is used as a text supplement.

Task Migration in Edge Collaboration.
e edge computing unit describes the functions and characteristics of the terminal node in the MEC system after resources encapsulation [22], which includes the external interaction part and the internal application part [23]. e external interaction part covers the service provision and request interface, the resource request, and release interface, and the internal application covers its own status, identity, location information, and neighbor nodes. In addition, some edge computing units with powerful hardware performance also show migration mechanisms and node trust evaluation mechanisms [24]. e system structure and units of edge computing are shown in Figure 1.
Edge computing allows end devices to migrate storage and computing tasks to network edge nodes, such as base stations, wireless access points, and edge servers. While meeting the computing capability expansion requirement of the terminal device, it can effectively save the transmission link resources of the computing task between the cloud server and the terminal device. Edge computing is mainly composed of four layers of functional structure: core infrastructure, edge computing center, edge network, and edge devices.
e edge server carries most of the functions of the cloud computing center in the cloud computing mode and can provide services and computing support to each edge terminal, which can lay a solid foundation for the progress of mobile computing [25]. However, the network edge is affected by factors such as environment and hardware, and there is no way to increase the settings of the edge server [26]. As a result, various terminals at the edge of the network begin to perform collaborative tasks. e advantages of such processing include increasing the processing speed of tasks, balancing terminal load and energy consumption, and increasing the utilization rate of system resources. However, challenges and opportunities coexist. ere are many factors in designing multiedge terminal tasks, so it is very difficult to design a coordination mechanism for multiedge terminal tasks [27].
In the scenario of multiuser collaboration, the edge computing task offloading network connection model is shown in Figure 2. e characteristics of the link system are summarized as follows. ① e connection between the incoming line and the outgoing line must go through one or several interlevel connections, and this connection or connecting device is a link. ② e link and the selected outgoing line are occupied at the same time. ③ When the lines are selected, only the links that can be connected to idle outgoing lines should be selected. is method of line selection is called conditional selection.
A system link model is constructed to improve the overall throughput of the system to reduce the network load of core gateways such as cloud servers in the future big data environment. e working principle of this model is sinking the server to the edge of the network, which greatly shortens the transmission distance compared with gathering all tasks in the cloud center for processing [28]. e node only needs to transmit its own information such as task queue, node Computational Intelligence and Neuroscience resources, and node status to the edge server. At this time, the system uses the corresponding uninstall strategy to decide task migration.
is system model can greatly reduce the amount of data transmitted by core gateways such as MEC servers in the scenario of multiterminal edge collaboration, thereby reducing the network load and system delay [29].

Algorithm Design of Task Migration.
e weighted Euclidean distance of the calculation cost T pt and transmission cost T ts for node n i to migrate to node n j and the credibility t fj of node n j is calculated in the following equation, which is called the matching degree D ij between the node task and service node: In equation (1), W 1 , W 2 , and W 3 are the corresponding matching weights of the calculation cost T pt , transmission cost T ts , and credibility t fj of node n j in the actual environment, respectively. According to the actual environment of the system, different values can be assigned [30].
To facilitate the comparison of the performance of the three migration methods of CLM algorithm, RM algorithm, and GHM algorithm, the parameters must be controlled to ensure that irrelevant factors have no influence on the judgment of system performance. e experimental simulation data is shown in Table 1.
In Table 1, K refers to the number of IoT terminal nodes, the number of base stations refers to the number of smart base stations, and P ij represents the probability that node ni fails to provide services to node nj. c 1 and c 2 refer to the link cost of tasks migrating among nodes under the same base station and that under different base stations, respectively. S ni refers to the number of tasks that IoT can perform in each time slice, and a ni means the number of IoT node tasks in each time slice.

PSO Algorithm.
PSO is a swarm optimization algorithm inspired by the foraging behavior of birds. In the population of PSO, individual particles evaluate their own position information in each round of evolutionary iterations by searching for solutions to multidimensional problems in the space. roughout the group search process, the particles share their "optimal" position information. en, they use their memory to adjust their own speed and position, constantly comparing and following the candidate problem space solutions. e optimal solution or local optimal solution is found. Figure 3 shows the PSO algorithm.   e goal of PSO is to make all particles find the optimal solution in a multidimensional volume. All particles in space are first assigned initial random positions and initial random velocities. e position of each particle is then advanced in turn based on its velocity, the known optimal global position in the problem space, and the known optimal position of the particle. As the computation progresses, by exploring and exploiting known vantage points in the search space, particles cluster or aggregate around one or more optimal points. e mystery of the algorithm design is that it retains two pieces of information, the optimal global position, and the known optimal position of the particle. Subsequent experiments reveal that retaining such information has a better effect on faster convergence speed and avoiding prematurely falling into a local optimal solution. is also lays the foundation for the improvement direction of the subsequent particle swarm optimization. e evolution equation of the basic PSO algorithm is as follows: (2) In the above equation, v ij is the velocity of the particle, p ij is the position of particle i in j dimension, and λ is the inertia weight.
According to the analysis of the particle search path, to ensure the convergence of the PSO algorithm, the particles continuously approach their local attractors during the particle search process. e equation is expressed as follows: In the above equation, t is the current iteration number. v ij represents the velocity of particle where v max is the maximum speed allowed by the particle. p ij represents the position of particle i on j dimension, p ij ∈ [−p max , p max ], where p max is the maximum space position that the particle is allowed to move. λ is the inertia weight, used to balance global search and local search. b ij represents the individual extreme value of particle i on j dimension. g ij represents the global extreme value of particle i on j dimension. c1 and c2 are acceleration factors that characterize the ability of particles to selfsummarize and learn from high-quality particles in the group. r1 and r2 represent random numbers between [0, 1]. β is the constraint factor, which is used to control the weight of speed.

Construction of Translation Corpus.
e data collected in this study is used for research, and the translation quality in the parallel corpus must be guaranteed, so the data collector must have a certain degree of bilingual language ability in Chinese and English [31]. e data of this corpus comes from online electronic texts and leaflets produced by authoritative media such as Hujiang English, China Daily, British Broadcasting Corporation (BBC), published books, official websites of tourist attractions, and bilingual subtitles and audio of tourist documentaries [32]. Most of these bilingual corpora are based on Chinese-English translation. At present, about 100,000 English words, 250,000 Chinese words, and 70,000 bilingual words have been collected. Moreover, since research is a process of continuous development, storage capacity will not be static and will continue to expand over time.
During the construction of corpus, the input of a large number of corpora will inevitably lead to phenomena such as misplacement, garbled characters, and symbol errors [33]. At that time, the corpus should be cleaned up. e corpus cleaning is mainly divided into text digitization and text organization. Although the current software applications are quite mature, they still cannot reach 100% accuracy. erefore, the text after software conversion will inevitably appear garbled and misplaced, and there will be blank lines. Due to the large amount of text, text Processing Master 8.0 is used for text batch processing, which contains functions, such as deleting all blank lines, adding characters in the first line in batches, and handling special characters, which are very helpful in text organization. After the software is operated, the text will be manually checked and processed to examine the text omissions, vocabulary spelling, and other Computational Intelligence and Neuroscience errors that cannot be recognized by the machine to ensure its high cleanliness. Corpus labeling refers to the division of corpus components for further retrieval and research, which is called part-of-speech labeling. Since the corpus contains bilingual languages, there are differences in labeling methods for different languages. When the English corpus is labelled, the corpus part of speech is divided and abbreviated, and the text is annotated with a tokenizer. However, the machine labeling cannot reach 100% accuracy, so manual verification is required [34].
When the Chinese texts in the corpus are labelled, the parts of speech should be labeled on the ICTCLAS platform firstly. en, the corresponding rhetorical means are labelled on the corpus according to a prominent rhetorical feature in the tourism discourse. Because there is no ready-made software to complete such marking, it needs to be done manually. During manual review, the rhetorical features contained in the sentence are obtained through the study of the phonetic, vocabulary, and grammatical features of the text. Different rhetorical devices are specifically labelled with sentences as a unit. e corpus mainly adopts autonomous coding methods, such as expressing similes, expressing puns, and expressing parallelism. Although manual coding is a huge project, once these annotations are completed, they will provide evidence for us to reveal the differences in the rhetorical usage of the English and Chinese tourism texts and the differences in the aesthetic concepts behind the texts.
is is of great help to comparative rhetoric and comparative aesthetics [35].
Corpus alignment is mainly for parallel corpora of Chinese and English texts, and the main steps are sentence division and sentence coding. e Chinese in the bilingual translation corpus is divided into five wildcards in words, which are^p, ?^p, !^p, "^p", and :^p. Replacing the five wildcards with the corresponding five punctuation marks can achieve a better sentence effect. e sentence division of the English corpus only requires four wildcards (^p, ?^p, !^p, and "^p"). e above steps are repeated again. Finally, the text is imported into Word Smith Tool 6.0. It can view the text that has been divided by clicking the "right button" next to the corpus and then clicking "view." e text can be saved and exported by clicking "Save."

Task Migration in MEC Scenario.
Multiuser collaborative service is only one of many application scenarios of edge computing. e task migration model of migrating multiuser tasks to the same edge cloud base station is analyzed in this study. Smart classrooms, smart phones, smart glasses, smart bracelets, and other smart IoT terminals have to perform complex and quantitative computing tasks in the development of future application-oriented businesses such as smart classrooms, smart transportation, smart cities, smart homes, and smart tourism. However, the battery energy of these smart IoT devices is often very limited, which cannot meet the life and work needs of human beings well. Edge computing well embodies the characteristics of distributed computing. e calculation is performed in the local area network (LAN) without transmitting the computing data or raw data to the cloud for processing through the network. It can reduce the computing load of the terminal device and can respond to the user request quickly. e system model for calculating migration in this study is the time division multiple access MECO system in longterm evolution (LTE). e total migration time slot T is divided into disjoint time frames firstly, and then each different frame is divided into different channels. e end users correspond to different channels, and the edge server uses the different channels to distinguish the end users, so as to realize the network link of multiple terminals and a single edge server. e MECO migration system with K as the number of end users is shown in Figure 4. e operation process of the system in Figure 4 is as follows. In Step 1, the end user accepts the task and uploads its own information to the edge server. In Step 2, the edge server makes a decision on task scheduling and sends the decision result. In Step 3, the terminal user receives the decision result and decides whether to migrate its own tasks to the edge server according to the decision result. In Step 4, the edge server receives the tasks of each terminal for response processing and returns the result to the end user. In this scenario, the tasks received by end users in each time slot are regarded as complete and indivisible; that is, tasks can only be computed locally or migrated completely.
Computing migration includes five modules of application perception, perception collection, task splitting, overall scheduling, and terminal execution. e computing migration decision process involves the number of end users, edge servers, channels, and bandwidth. Moreover, it may move with the end user's location. erefore, the bandwidth, channel gain, communication noise, and terminal transmission power of the system are considered jointly in this study to establish a migration model for edge computing in the case of multiple terminals and multiple edge service servers. e migration steps of the MEC system are shown in Figure 5.
A mobile device is composed of a migration decision unit, a local processing unit, and a transmission unit. e mobile device migrates some computing-intensive computing tasks to the MEC server for execution through the transmission unit, so as to solve the limited computing power of the mobile terminal. e MEC server is a virtual machine device deployed at a wireless access point and installed in a small data center, which can provide powerful IT services for mobile devices. e energy consumption optimizations in multiterminal single edge service computing migration of CLM algorithm, RM algorithm, and generative algorithm are simulated to analyze the energy consumption performance of the three migration algorithms. Massively controlled experiments are performed. e simulation experiment parameters for MEC calculation migration are shown in Table 2.
In Table 2, K refers to the total number of IoT terminal users in system. T is the total migration time slot. C k is the calculation consumption of the terminal calculation k. σ represents the variance of Gaussian white noise. B refers to the channel bandwidth. P k refers to the transmission power of the IoT terminal. S k is the computing power of the terminal calculation k, and e k is the energy consumption of each cycle for local calculation of terminal k.

Task Migration for the Class.
e two-way interactive online education model is based on the first generation of online education, which increases the interactive feedback link, considers the learner's learning experience and learning effect, and emphasizes the interactive nature of learning and the use of technology to deliver education and teaching content. It also contains feedback from learners and organizes students to communicate and discuss. is education model mainly focuses on three-screen courses, massive open online courses (MOOCs), and video open courses.
In addition to the test questions, assignments, and learning works contained in the traditional two-way interactive education model, the translation course design is supplemented with a new real-time barrage function. According to general functions, MTI students use the tools of the corpus, such as retrieval, clustering, collocation, vocabulary, and keyword list to analyze and translate the original text in the parallel translation corpus. Many comments may suddenly appear on the screen within a certain second and float on the screen like a horizontal version. is kind of online comment method is called "barrage" by netizens. At present, barrage videos are mostly used in media fields such as movies, television, and live broadcast platforms. However, the potential value of barrage videos such as distance education and online learning has received little attention and exploration by domestic and foreign researchers. One of the major disadvantages of traditional twoway interactive online education is the inability to get realtime feedback and interaction from students. e addition of the real-time barrage function can reflect and solve problems in the learning process in a timely manner, greatly improving the learning efficiency and enhancing the participation of MTI students. Compared with other majors, MTI focuses on the active participation of students. erefore, online teaching based on real-time barrage is very suitable    Computational Intelligence and Neuroscience for actual teaching of MTI. e teaching content is detailed and practical, which further promotes the innovation of MTI teaching. e design of the translation course is shown in Figure 6. e two-way interactive teaching mode in the network environment shown in Figure 6 can fundamentally change the role of teachers (from lecturers to instructors), change the status of students (from receiver to the main body), change the function of the media (from presentation tool to the recognition tool), and change the teaching process from the process of logical analysis and teaching to the process of acquiring knowledge and cultivating abilities by discovering and exploring problems.
A translation workshop platform suitable for students and teachers is constructed based on three self-built tourism corpora.
e users of the platform are classified into teachers, students, and managers. To ensure the security of the platform, teachers and students have to log in with the teacher ID number and student ID number, and administrators have to register and authenticate according to their ID cards. At present, the functions of the platform are divided into corpus experience area, practice area, information mutual assistance area, and acceptance area. e corpus experience area is the area where platform personnel perform functions such as denoising, labeling, indexing, term extraction, and alignment and realize the real meaning of corpus-assisted translation. e practice area focuses on practical operations and is mainly divided into the role playing of project managers, translation managers, translators, project managers, proofreaders, typesetting personnel, and corpus administrators. Platform personnel can conduct actual drills according to their own needs and improve themselves during the drills. e information mutual assistance zone is relatively simple, and platform staff can share operation and translation experience as well as learning materials such as translation tools and corpus links. e acceptance area is the area where the management personnel are located.
is area collects suggestions and opinions from platform personnel. In this way, the platform is continuously optimized, and the errors are corrected to further improve the operational level of translation workshops. e plan of the translation corpus is shown in Figure 7. e corpus has three characteristics: (1) e corpus stores the language materials that have actually appeared in the actual use of the language, so the example sentence database should not usually be regarded as a corpus. (2) Corpus is the basic resource carrying language knowledge, but it is not equal to language knowledge. (3) Real corpus needs to be processed (analyzed and processed) before it can become a useful resource.

Application of English Translation Based on PSO-ANNs
Model. Artificial neural network is usually composed of multiple neurons and multiple nodes according to the algorithm principles of PSO algorithm and neural network. Multilayer feedforward neural network model is the most widely used neural network model, which mainly includes input layer, output layer, and hidden layer. e input layer obtains the required information from the outside and then inputs the obtained information into the neural network for subsequent processing. e hidden layer implements processing, and the output layer can output the processed results to the desired location. e neural network learning ability analysis model shown in Figure 8 is established.
In this study, the PSO algorithm is firstly improved. e random distribution method is used to obtain inertia weights to maintain the diversity of the population and improve the search ability. At the same time, the asynchronous change strategy is used to change the value of the learning factor to strengthen the learning ability of the particles and accelerate the convergence to global optimal solution. Secondly, the improved PSO is combined with feedforward neural network algorithm. Finally, for the complex and multidimensional factors, a variety of dimensionality reduction processing methods are used to obtain the factors of the main relevant information.
en, the following equation is used to determine the number of hidden layer nodes of the neural network model: In the above equation, J is the number of hidden layer nodes, M is the number of output layer nodes, and N is the number of input layer nodes. According to the above equation, the relationship between the number of network training times and the number of hidden layer nodes is obtained. e optimization principle of PSO algorithm is introduced into the neural network, which enhances the global optimization capability of the algorithm. e composite algorithm uses the movement and update of particles to find the optimal solution of the neural network at the initial stage. e algorithm flow is shown below.

First
Step (i) Data preprocessing is implemented via the normalization method, and the purpose is reducing the noise of the original data.
(ii) e output value is denormalized.
x i is the normalized value, z i is the denormalized value, λ 1 is the lower limit, λ 2 is the upper limit, z max i is the maximum value in the original data, and z min i is the minimum value in the original data. e second step is setting the neural network related parameters. 8 Computational Intelligence and Neuroscience e third step is PSO initial position and speed setting. e initial position is e initial speed is Optimal location record is e fourth step is the network output: (i) Hidden output layer (ii) Output layer is (t j ) is the weighted sum of the input of the j-th layer. Y j is the output of the j-th layer. (iii) Calculate reverse difference: (iv) e weight matrix Δw and bias vector Δθ are calculated and updated: In the above equation, w hj and θ j represent the new weight matrix and bias vector, respectively. w hj ′ and θ j ′ are the original weight matrix and bias vector, respectively. e fifth step is as follows: (i) Calculate particle fitness. (ii) Update particle position and velocity.
(iii) PSO-ANNs model. e mobile edge computing system designed in this study is divided into three parts. e first part is the mobile device, the second part is the edge server, and the third part is the cloud server. In this work, the mobile client is used to collect data through mobile phone software and upload it to the edge server. e edge server extracts the discriminant information through the projection matrix trained by the cloud server and compares it with the relevant information to obtain the relevant results and returns it to the mobile terminal. Its related feature information will be sent to the cloud server as a new training sample. e cloud server uses the projection matrix and feature information in the training database to send it to the edge server. In this study, Alibaba Cloud is selected as the cloud server, the hierarchical discriminant analysis algorithm proposed in this study is adopted to train the projection matrix obtained in the database, and the projection matrix was applied to extract the feature information of the data in the database and send it to the edge server for identification. A large amount of identifiable data is stored in the cloud server and trained using a hierarchical discriminant analysis feature extraction algorithm, and the projection matrix and feature information of all images are obtained, which is sent to the edge server as the basis for translation recognition.

Model Parameter Settings and Dataset Construction
(1) Model parameter setting is to set the two input objects. Input1 is undertaken as an example. In-put2 and input1 perform the same operation, and the input form of the defined data is input1 � keras.layers.Input(shape� (16,4),name � 'input1′), which represents a 16 × 4 matrix. en the data goes into the convolutional layer, where input1 is renamed, input1 is named Convolution1, and input2 is named Convolution2. After the operation of the convolution layer, the data will be subjected to a secondary operation in the pooling layer. After the operation of the pooling layer is completed, the data processing of the CNN part is basically completed, and then the data processed by the CNN is used as the input of the particle swarm algorithm. e ReLU function is used as the activation function.
(2) Construction of the dataset: It can be seen from the previous data acquisition and preprocessing that, to fully train the model to achieve the true prediction of the problem, the data needs to be divided into training set and test set. e training set is used for model training and model parameter determination, and the test set is used to finally test the performance of the model. In this work, the training set and test set were divided according to the ratio of 9 : 1.

Model Training Environment Configuration.
is research experiment is completed under the Ubuntu 16.04 operating system. e model programming language uses Python 3.6, and the compilation environment uses software Anaconda. e training in this study is implemented based on the Keras framework. Keras is a Python-based deep learning framework built on TensorFlow 2.0, which can easily define and train almost all types of deep learning models.

Experiment Simulation Results of Edge Collaboration.
e experiment simulation results of the edge collaboration are illustrated in Figure 9. e curves in different colors represent different simulated values.
Further simplification of the data in Figure 9 during the course of the study resulted in the data plots in Figures  10(a)-10(d), respectively.
In Figures 9 and 10, A represents the throughput comparison of RM, CLM, and GHM algorithms, while B represents the task completion time and cost of the three algorithms. C represents the influence of environmental factors on the new performance of the system, and D represents the influence of different thresholds set by the three algorithms on throughput.
Figures 9(a) and 10(a) illustrate the comparison of the throughput of three different migration algorithms. ere are three different migration algorithms, RM, CLM, and GHM, when the system runs stably. e system throughput of the third algorithm has increased by 12% and 50%, Computational Intelligence and Neuroscience respectively, in contrast to that of the other two algorithms. erefore, the GHM algorithm shows better performance than the other two task migration methods regarding the system stability. Figures 9(b) and 10(b) show the comparison of the time cost of the three algorithms. e average time for the CLM algorithm requires the longest time to complete the task, for it is affected by the computing power of the terminal. e comparison shows that the average time for the GHM algorithm to complete the task is reduced by 60% compared to the CLM algorithm. erefore, the GHM algorithm shows the best stability among the three different algorithms.
Figures 9(c) and 10(c) show the comparison results on the impacts of different deployment environments on system performance. e relatively obvious impact on system throughput performance is during task migration, and the deployment distance among nodes has a small impact on system throughput performance. erefore, the possibility of task transmission among nodes should be prioritized. In the three different deployment environments, the system stability is 1.4 × 10 8 , 2.8 × 10 8 , and 6.5 × 10 8 , respectively. e data shows that the third algorithm is the most degraded, followed by the first two. Figures 9(d) and 10(d) show the comparison results on the impacts of different maximum delay time on system throughput. e system stability has a small fluctuation when the values are 1, 2, and 5 when other parameters remain unchanged. In other words, the difference has minimal impact on the performance of task migration algorithm. (B) shows simulation results of MEC system migration. e simulation results on the relationship between the total number of migrated users and the migration rate are shown in Figure 11.
In Figure 11, A represents the comparison of the maximum number of mobile terminals of traditional migration and genetic migration in fixed time slot, and B represents the length of mobile time slot and the maximum number of mobile terminals. Figure 11(a) shows the number of IoT terminals migrated by CLM, GHM, and RM algorithms when the system time slot length is fixed to 20 ms with different total users. GHM algorithm shows the user migration rate of 100% when the number of terminal users is 20 or 30. ere is no user migration under the CLM algorithm (the migration rate is 0), and the user migration rate under the RM algorithm is 66% and 63%, respectively. e user migration rate under the GHM algorithm is 93% and 62%, respectively, after the number of terminal users rises to 40 and 60. at under the CLM algorithm is still 0, and that under the RM algorithm is 56% and 37%, respectively. erefore, the migration rate of RM algorithm is lower than that of GHM algorithm as the number of users increases. Figure 11(b) shows the results of  the maximum number of users migrated in different system time slot lengths. e migration time slot increases from 20 ms to 100 ms, and the maximum numbers of users included in the GHM algorithm are 21, 38, 54, 74, and 92, respectively. e comparison on performances of different migration algorithms is shown in Figure 12. Figure 12(a) represents the comparison of energy consumption of the three migration algorithms, and 12(b) represents the comparison of computing time of the three migration algorithms. Figure 12(a) shows the energy consumption comparison of three algorithms. e system time slot length is also set to 20 ms, and the total number of users is set to increase at 10-80 gradient. e genetic algorithm saves about 20% of energy compared to the RM algorithm when the number of system users is less than 40, and its energy-saving ratio is about 59%. However, the energy-saving ratio of the genetic algorithm begins to decrease when the number of users in the system is greater than 40. e energy-saving percentage dropped again when the total number of system users increases to 50. e trend shows that the energy-saving ratio of   the genetic algorithm is lower than that of the CLM algorithm and the RM algorithm, so the genetic migration algorithm shows high energy-saving efficiency. Figure 12(b) shows the comparison of the time cost simulation experiment results of the three algorithms. e time required for the hybrid genetic migration algorithm is much lower than the time required for CLM algorithm when the number of system users does not exceed 40. e time required for execution of the migration algorithm increases fast when the number of system users is greater than 40. erefore, the genetic algorithm proposed in this study is more efficient than the RM algorithm and the CLM algorithm.

PSO-ANNs Simulation Results.
e PSO-ANNs model is used to verify the teaching effect of English translation. First, the sample collection of students' English translation learning characteristics is completed, and then it is    16 Computational Intelligence and Neuroscience proceeded in two steps. e first step uses PSO algorithm to train the neural network. e second step is evaluating and testing the validity of the model. e algorithm dataset is from Tianchi Datasets of Alibaba, and 2,000 students' English translation data are taken as the dataset of the algorithm in this research. However, due to space issues, the datasets are not provided in this article. e established model evaluates the quality of English translation teaching and compares it with ANNs model. e results are shown in Figure 13. Computational Intelligence and Neuroscience Figure 13(a) shows that ANNs reach convergence after about 45 iterations, while the PSO-ANNs model only needs about 30 iterations to reach convergence. e addition of PSO algorithm can effectively improve the convergence speed of ANNs neural network and reduce model training time. Figure 13(b) shows that the evaluation accuracy of the PSO-ANNs model with the PSO algorithm is due to the ANNs, indicating that the PSO algorithm can improve the accuracy of the ANNs network. en, the PSO-ANNs model is used to verify the effect of English translation teaching, and the result is shown in Figure 14.
e training results of the algorithm are shown in Figure 14. Under the same experimental conditions, the model error is 0.23 when the number of particles is 5, and the model error is 0.32 when the number of particles is 10. When the number of particles is 15, the error of the model is 0.05, and the performance of the model is the best at this time. It means that, within a certain range, the more the number of particles, the better the algorithm performance.

Conclusion
In the context of the IoT based on edge computing, this study analyzes the English translation teaching practice, corpus construction methods, and task transfer algorithm technology. Combined with the system task transfer algorithm of the MEC scenario, an English-Chinese/Chinese-English bilingual translation corpus was constructed, and a two-way interactive online English translation course is designed. GHM algorithm shows better performance than CLM algorithm and RM algorithm in actual English teaching. In addition, the addition of PSO algorithm can effectively improve the convergence speed of the neural network, reduce the model training time, and improve the accuracy of the neural network. e neural network is trained by the PSO algorithm, and the optimal solutions of different particle populations are obtained. Under the same experimental conditions, the model error is 0.23 when the number of particles is 5; the model error is 0.32 when the number of particles is 10; and the error of the model is 0.05 when the number of particles is 15. e model performs best at this point. However, this study also has some shortcomings. Firstly, it only focuses on two-way interactive online English translation courses and does not discuss preclass preview and after-class maintenance. Secondly, due to the limited resources and less test data of the system, further exploration is needed in the future to supplement and improve the application of the proposed task transfer algorithm in English practice classroom research.
In future research, it will discuss the application of edge computing technology in "interactive" translation teaching mode. It is believed that the combination of edge computing technology and "interactive" translation teaching mode can make up for some deficiencies in traditional translation teaching, which contributes to the realization of translation teaching goals.

Data Availability
e data used to support the findings of this study are included within the article.

Conflicts of Interest
e author declares that there are no conflicts of interest.