Feasibility Analysis of 3D Printing-Assisted Pedicle Screw Correction Surgery for Degenerative Scoliosis

Objective. To explore the feasibility of 3D printing-assisted pedicle screw correction surgery for degenerative scoliosis. Methods. From January 1, 2015 to January 31, 2020, patients with degenerative scoliosis who received corrective surgery in our hospital were retrospectively analyzed. Patients were grouped based on the xation methods. Patients in the control group received traditional pedicle screw internal xation, while those in the study group received 3D printing-assisted pedicle screw xation.e therapeutic eects were compared. Results. ere were 78 cases in the control group and 82 cases in the study group.ere were no signicant dierences in scoliotic Cobb’s angle, pelvic incidence-lumbar lordosis (PI-LL), VAS score, JOA score, social function, physical function, role function, or cognitive function between the study group and the control group before the surgery, but there were dierences in the above parameters between the two groups after surgery. e incidence of postoperative complications in the study group was also signicantly lower in the study group. Conclusion. 3D printing-assisted pedicle screw correction surgery provides a strong 3D correction force with reliable eect and fewer complications, and is a good treatment choice for degenerative scoliosis.


Introduction
In degenerative scoliosis, the deformity of the spine is threedimensional (3D) and rotational due to the progression of the lesions in the vertebrates. e Cobb angle is characteristically over 10°. e lesions initiate as asymmetric degeneration in the disc and joints, producing asymmetric loading and subsequent deformity. e symptoms include pain with neurological de cits. Nonsurgical treatment includes medication and physical therapy. Alternatively, epidural injections for selective nerve root blockade may be used [1,2]. In patients with uncontrollable pain or neurological de cits, the purpose of surgery is to decompress neurons by repairing, modifying 3D deformities, and stabilizing vertebrate balance.
is study investigated the feasibility of 3D pedicle screw correction surgery for degenerative scoliosis.

Materials and Methods
is study included patients who received degenerative scoliosis and correction surgery at our hospital from January 1, 2015, to January 31, 2020. e ethics committee of our hospital approved this study. All included patients and their families were informed of the study and actively signed informed consent. e inclusion criteria were: (1) Clinically con rmed degenerative scoliosis; (2) corrective surgery required; and (3) normal cardiopulmonary function. e exclusion criteria were: malignant disease, mental illness, drug allergy, any previous treatment of degenerative scoliosis with surgeries or medications, chronic diseases that need long-term medication such as hypertension, diabetes, etc., or lost-to-follow-up.
2.1. Methods. All patients received frontal and lateral X-ray photography of the whole spine before surgery for determination of the patient's scoliosis and rotation; left and right refractive photography and suspension traction photography were used to determine the patient's spine elasticity as well as the largest orthopedic angle of the patient during the operation. MRI scans and CT scans of the spine were performed before the operation to determine whether there were lesions with or without neural structures such as spinal cord cavities and cauda equina and to determine the actual rotation angle of the pedicle of the rotational deformity. e minimum diameter of the pedicle lays the foundation for the determination of intraoperative positioning and screw insertion angle. At the same time, pulmonary function tests, somatosensory evoked potentials, and action evoked potentials were performed to determine whether there was damage to other organs. Before the operation, conventional spinal traction therapy was used to relax the small joints of the cervical spine, and the adaptability of the nerves in each group to stretching was observed. Patients in the control group received traditional pedicle screw internal fixation. Patients in the study group were treated with 3D printingassisted pedicle screws for 3D fixation [3].

Observation Indicators.
e visual analog scale (VAS) score, Japanese Orthopaedic Association Evaluation Treatment (JOA) score, quality of life score, scoliosis Cobb's angle, pelvic incidence-lumbar lordosis (PI-LL, Table 1), and postoperative complications were compared between the two groups.

Statistics.
e data in this experiment were analyzed by SPSS21.0 (SPSS, Chicago, IL, USA), in which the count data (n, %) were analyzed by χ2 test, and the measurement data (‾x ± SD) were analyzed by t-test. P < 0.05 (two-sided) represents statistical significance.

Baseline Data of Patients.
A total of 160 eligible patients (78 and 82 in the control group and the study group, respectively) were retrieved. e average age of patients in the control group was (56.96 ± 5.02) years old, and that in the study group was (56.51 ± 6.36) years old.
ere were no differences in gender, age, and past medical history between the two groups (P > 0.05 for all comparisons). e clinical characteristics of the patients were shown in Table 2.

Comparison of VAS Score and JOA Score before and after
Surgery. No significant differences existed in the VAS score (7.58 ± 2.13 vs 7.47 ± 2.25) or JOA score (12.57 ± 0.38 vs 12.26 ± 0.50) between the study group and the control group (p � 0.564 and 0.826, respectively) before surgery. After surgery, there were significant differences in the VAS score (3.10 ± 0.18 vs 4.41 ± 0.56) and JOA score (23.42 ± 0.36 vs 19.50 ± 0.51) between the study group and the control group (P � 0.005 and P < 0.001, respectively, Table 4).

Quality of Life Comparison.
Before surgery, there were no significant differences in the social function (63.80 ± 3.62 vs 65.61 ± 2.80), physical function (64.23 ± 5.51 vs 64.35 ± 5.08), VAS score [4] 0 is the best, the patient has no pain 1-3 points or less is mild pain that can be tolerated 4-6 points: e pain is more severe, and the patient's sleep is slightly affected 7-10 points are unbearable severe pain, the patient cannot sleep, which seriously affects normal life JOA score [5] Subjective symptoms Clinical signs Limitation of daily activities e total score is 29 points, a higher score represents a better function Quality of life score [6] Cognitive Role Social Physical e total score is 100 points. A higher score represents a better life quality   Table 5).

Postoperative Complications Comparison.
ere was a significant difference in the total incidence of postoperative complications between the study group and the control group (P � 0.001, Table 6).

Discussion
Degenerative scoliosis occurs through degenerative changes without pre-existing spinal deformity, and it is generally more common in older age groups. It is presented with asymmetric disc space collapse and facet degeneration followed by lateral and/or rotational sliding [7]. is condition, which results in loss of lumbar lordosis as well as sagittal malalignment, will inevitably lead to poor clinical outcomes. Progressive low back pain as well as symptomatic lumbar spinal stenosis are more common in patients with new-onset scoliosis, along with neurogenic claudication or radiculopathy [8,9]. Generally, symptoms such as progressive clinical deformity and sagittal imbalance will appear later in this group of patients. e treatment of such diseases is complex and based on different pathophysiological and clinical manifestations, with examples of physical therapy and analgesics for many years [10]. Surgical therapies include complex instrumental fusion or simple laminectomy, which are invasive and may have potential complications [11].
About 90% of those patients mainly present with pain, muscle fatigue, and spasticity of scoliosis causing diffuse and axial low back pain in most patients. Judging from the fluoroscopy-guided articular surface injection, all of these people have low back pain due to articular surface degeneration [12,13]. e disease is characterized by asymmetric disc space and joint degeneration. In this group, there is "hip rib" pain and/or dysfunction due to sagittal imbalance, which is a chronic condition. In the clinical evaluation of such patients, the key is to correctly understand the causes of their pain. Degenerative scoliosis is a complex, multifactorial process that develops over time, so there are many possible etiologies. Pain may be related to major leg joint deformity progression and dysfunction, nerve damage, or degenerative arthritis.
Pedicle screw fixation is aided by 3D printing [14]. e three columns of the spine have a strong control force, and the internal fixation device is tightly mounted to the bone, thereby generating a strong correction force [15,16]. Suk conducted a retrospective analysis of scoliosis using the pedicle screw technique [17] and found that compared with hook fixation, pedicle screws treated more main thoracic curvature cases (55.8% vs 51.7%). e incidence of postoperative defects was 5.7% and 10.6% in screw therapy and hook therapy, respectively. e postoperative lumbar curvature correction rate was 54.9% and 46.9% in the pedicle screw group and hook fixation group, respectively. In   Evidence-Based Complementary and Alternative Medicine addition, pedicle screws can increase the control of the apical vertebra with maximum rotational deformity, therefore reducing splaying and compression. Studies have shown that directly acting on the spine can not only achieve correction in the coronal plane and sagittal plane but also reconstruct normal anatomy in the transverse plane [18,19]. However, the anatomy of the thoracic pedicle limits its widespread use. Rampersaud et al. established a morphological model using normal thoracic vertebrae specimens and showed that the implanted screws on the pedicle of the thoracic vertebra had only 1 mm of parallel displacement and 5°of angular offset. When scoliosis occurs in the spine, the angle and transverse diameter of the pedicle will inevitably change due to the rotation and wedge deformation of the vertebral body itself. erefore, the preoperative image preparation work is to determine the actual angle of the pedicle, the minimum diameter of the pedicle, the relationship between the pedicle and the transverse process, and the distance between the needle insertion site and the anterior edge of the vertebral body for the correction operation. e selection of positioning, entry angle, and implant provides an important reference to improve the accuracy of screw placement [20]. Simultaneous intraoperative EMG and endoscopy are key to preventing screw penetration of the inner wall of the pedicle. In this study, the patients who underwent pedicle screw 3D correction surgery had better treatment effects and fewer postoperative complications, showing that pedicle screw 3D correction surgery had obvious advantages.
To sum up, 3D printing-assisted pedicle screw 3D correction surgery provides a powerful 3D correction force with reliable effect and few complications, and is effective in dealing with degenerative scoliosis.

Data Availability
e data used in this study is available from the corresponding author upon reasonable request.

Conflicts of Interest
e authors declare that there are no conflicts of interest.