Active antennas (AAs) are devices combining a radiating subsystem as well as backing active circuits in tight integration, drastically reducing the complexity of the matching networks and filters by carefully designing the radiating element so as to provide the proper load for the active elements.
Although the idea of an AA is not new [
The current lead applications of AA are large electronically scanned arrays [
Indeed arrays of active antennas, or active arrays, are well suited for mobile terminals requiring dynamic satellite tracking. The most common approach toward achieving fast-beam scanning is through the integration of monolithic microwave integrated circuit (MMIC) phase shifters, low-noise amplifiers, and solid state power amplifiers with the antenna elements. In some cases, hybrid electro/mechanical arrays combining mechanical steering with electrical steering/shaping are considered. This architecture is often used to reduce the number of active control elements by limiting the electrical scanning in only one plane. This is often the case for mobile user terminals where azimuth scanning is performed by mechanical rotation and elevation agility is realized by a linear phased array.
Active phased arrays are well known for being complex and expensive antennas and, as a consequence, only few space missions exploited this type of antenna. This is not the case for ground and airborne radars, where major funding, mainly from the US defense programs, has led to large-scale production of T/R modules reaching a goal of a $100 cost per module already in the 80s. Unfortunately, this background is hardly reusable for space missions, due to the completely different requirements and operational constraints. One interesting exception is the IRIDIUM satellite system, where the main mission antenna has been conceived essentially reusing T/R technology previously developed for radar applications [
Another factor limiting a wider application of antenna phased arrays in space missions is linked to their large mass and high power dissipation, especially for the large active phased array configurations. This generates the need for new ultralight technologies and thermal hardware. With the progress in developments of more efficient T/R modules, thermal aspects may become less critical, but the improvement on this parameter is not as quick as expected.
During the past 20 years, the basic radiating elements and feeding lines present in phased array systems have evolved with a variety of microstrip, stripline, and other printed radiators replacing the traditional dipoles, slots, or horns, fed by coaxial lines or waveguides. Developments in monolithic and other fabrication processes allowed for the automated production of phased arrays with a high integration level and not by piecewise assembly as in the beginning. Using digital processing or analog devices, the active phased arrays will have time-delay capability to make wideband performance possible. Other important features of array antennas are the distribution of solid-state power amplification with graceful degradation and a lower risk of power handling. Active phased arrays can also be designed to conform to the surface of a spacecraft.
Today phased arrays for space missions are mostly considered when in flight beam reconfigurability or inertialess beam steering is required. However, it is important to note that array antennas may find wider space applications when nongeostationary telecommunication constellations are considered, or as a way to generate very large apertures thanks to digital processing techniques for beamforming.
Active phased array antennas directly radiating or receiving the signal are called “Direct Radiating Arrays” (DRAs). If, on the other hand, they are used to illuminate reflectors the antenna systems are called “Array Fed Reflectors” (AFRs). Feed arrays can compensate for the inherent distortions of large reflectors deployed in space, thanks to techniques monitoring the reflector surface or synthesize a desired radiation pattern by adjusting the feed coefficients and they can assist to move the complete multiple beam pattern over the coverage, therewith handling seasonal deviations in desired scanning/coverages, without moving the satellite thus saving propellant and extending its lifetime.
At last, to give an idea of the relevance of AA in electromagnetic engineering, a survey has been made over the INSPEC bibliographical database concerning scientific publications addressing active antenna issues and covering the last ten years. Figure
Number of publications per year, (journal, conferences and books), on active antennas (purple) and on active integrated antennas (yellow).
This special issue collects fourteen articles, coming from 63 authors of 22 institutions of 8 countries, worldwide. Figure
Subdivision of authors by country (a) and subdivision of institutions (b).
Gaebler et al. present a novel liquid-crystals-based approach to tunable devices for millimeter wave reflectarrays. Cabria et al. deal with a novel beamsteering technique for reflectarrays. Theodoros N. Kaifas and John N. Sahalos propose the design of oscillators by exploiting interelement coupling in the array. Lucci et al. present dielectric resonator antennas harmonic tuning for optimum amplifier loading. Mailloux et al. exploit polyomino subarrays to achieve superior sidelobe and band performances. Viganò et al. present a sunflower-like array achieving a quasi-rotationally symmetric pattern with adjustable sidelobes and grating lobes level.
Capece describes the COSMO Sky Med SAR array antenna discussing implementation and design issues. Younis et al. present a comparison between different implementations of digital beamforming SAR. Bachmann et al. investigate pattern modeling techniques in the TerraSAR-X mission. Guy investigates the advantages of fully dynamic beam scanning for INMARSAT platform. Barba et. al. investigate possible topologies for reducing the beamforming network complexity. Catalani et al. present a complete design for an airplane-to-satellite active array. Vincenti Gatti et al. describe two novel design for flat fully-steerable antenna arrays for mobile-to-satellite communications. Shelley et al. show a low profile antenna for the air or ground terminal mobile-to-satellite link. This latter is a fully mechanically steered antenna but is here included because it provides a reference for the previous two active antenna systems.