International Journal of Antennas and Propagation
Volume 2021 (2021), Article ID 9819743, 1 page
https://doi.org/10.1155/2021/9819743

Corrigendum

Corrigendum to “Optimized Method for Generating and Acquiring GPS Gold Codes”

Khaled Rouabah,¹ Salim Attia,¹ Rachid Harba,² Philippe Ravier,² and Sabrina Boukerma¹

¹Team of Communication Signals, Geolocation, Parallel Processing and Hardware Implementation, ETA Laboratory, Electronics Department, University of Bordj Bou Arreridj, El Anasser 34031, El Anceur, Algeria
²PRISME, Polytech Orléans, 12 Rue de Blois, BP 6744, 45067, Orléans Cedex 02, France

Correspondence should be addressed to Khaled Rouabah; khaled_rouabah@yahoo.fr

Received 1 June 2021; Accepted 1 June 2021; Published 21 June 2021

Copyright © 2021 Khaled Rouabah et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

In the article titled “Optimized Method for Generating and Acquiring GPS Gold Codes” [1], the authors identified an error in Figure 1, where the x⁶ connection was missing. The corrected Figure 1 is as follows.

Figure 1: LSFRs based C/A Gold codes generator.

The register has the polynomial

References

K. Rouabah, S. Attia, R. Harba, P. Ravier, and S. Boukerma, “Optimized method for generating and acquiring GPS Gold codes,” International Journal of Antennas and Propagation, vol. 2015, Article ID 956735, 9 pages, 2015.