The Use and Preference of Functional Appliances among a Sample of Iraqi Orthodontists: A Web-Based Survey

Objectives This study evaluated the use and preference of different types of functional appliances among a sample of Iraqi orthodontists. Materials and Methods About 200 orthodontists were invited to fill out an online Google form questionnaire with multiple-choice questions. The questions were modified from previous England and Malaysian studies. The data were tabulated as frequency tables. Results The response rate was 61%. About 91.80% of the participants used functional appliances, with the removable type being the most used. The twin block was thought to be the best compliance one but not the most used functional appliance. About 62% depended on the clinical observations in determining the growth spurt and asked patients to wear the appliance full-time except at meal time. The majority preferred a period of retention of about 4–6 months and frequent visits for adjustments. Conclusions Removable functional appliances are the most frequently used among the studied sample.


Introduction
"Orthodontics is not only the appliance, but it is about which appliances, why, when, and for how long." e stomatognathic system is a living, viable, and remarkably adaptive system, mainly during its growth and development. Bone is one of the most responsive tissues to environmental stimuli. Despite that, it is the hardest tissue in the human body [1].
Orthodontic functional appliances might be one of two types: removable or fixed, mainly used to improve the position of the retruded lower jaw in relation to the upper one by directing the forces of stretching the muscles of the face, fascia, as well as the periodontium [2].
Variable compliance expectations placed on the patient are the primary management distinction between these two. e removable one necessitates attention to wear instructions, whereas fixed functional appliances necessitate patient assistance in preventing breakages and maintaining an exceptional level of oral hygiene [3]. e late mixed or early permanent dentition phase is optimal for using functional appliances. An earlier indication may be required, such as when preventative measures against psychological trauma are needed [4]. On the other hand, patients with a vertical growth propensity or who are nongrowing are contraindications for this form of orthodontic treatment. Cases with mandibular backward growth rotation, an anterior open bite, and a high mandibular plane explanation of different problems in medicine and dentistry [10][11][12] and also enables orthodontists to explain the shape, mode of action, and uses of different orthodontic appliances.
Iraq's orthodontics clinics have access to many commercially available functional appliances. e clinician's preference and selection are determined mainly by the education, abilities, experiences, and emphasis acquired throughout orthodontic training.
is survey is performed to explore the variance in the application and management protocols of functional appliances by Iraqi orthodontists, as well as to clarify the clinical preferences among providers.

Study Design and Approval.
Approval of the scientific committee in the Department of Orthodontics, the College of Dentistry, University of Baghdad was gained to conduct this cross-sectional web-based survey among Iraqi orthodontists.

Sample. About 200 Iraqi orthodontists registered in the
Iraqi orthodontic society were invited to participate in this online study.

Methods.
A survey on Google forms was prepared, and it consisted of general questions about the use and preference of functional appliances utilized by Iraqi orthodontists to treat different malocclusions.
is questionnaire was modified from Chadwick et al. [13] and Bahar et al. [14] research works, and it included the following questions in addition to the personal data: "Do you use functional appliance therapy in your practice?" (1) "What are the reasons for not offering functional appliance treatment?" (A) I do not have adequate experience with the functional appliance (B) Poor patient cooperation in most of the cases (C) I do not believe that it causes major skeletal changes rather than dental (2) "Do you refer such a patient to one more orthodontist for that treatment?"   Table 1 shows the demographic distribution of the participants' data. e male-to-female ratio is nearly equal, with a 61% response rate (122 from 200 orthodontists invited). Most of the participants were awarded the Master of Science degree in orthodontics, and more than 70% are working in public hospitals and private clinics. Upon asking about using the functional appliances in daily practice, 112 (91.80%) responded positively, while only 10 participants did not use the functional appliance due to lack of adequate experience or poor patient cooperation. Of those ten, only 6 refer the patients to other orthodontists ( Table 2). Table 3, about 73.21% prefer to use the removable appliance, two only used the fixed one, and 28(25%) used both appliances.

Orthodontists' Preferences of Functional Appliances in Treating Different Malocclusions. Referring to
Of 30 participants who used the fixed appliance, 5 preferred Herbst, 4 preferred SUS, 3 preferred MARA, 3 preferred Herbst and MARA, and 15 used other types. e most preferred removable appliances for treating class II cases are twin block, myobrace, and monobloc, while for class III, myobrace and Frankel III are the most preferred. In addition, myobrace is preferred as a habit breaker.

Treatment Protocol.
About 49.11% of the participants treated Class II cases with the functional appliance before the maximum growth spurt, while 32.14% preferred the treatment at the maximum growth spurt (Table 3).
On the other hand, for Class III cases, 69.64% treated their cases as early as detected, while 30.36% postponed the treatment to the period before the maximum growth spurt.
Regarding the methods of determining skeletal maturation, 54.46% of the participants depend on the appearance of secondary sexual characteristics such as hair on the face in males and the menstrual cycle in females. In comparison, 17.86% depend on the OPG and lateral cephalometric radiographs to determine the CVM, yet only 9.82% use the hand wrist for that purpose.
Regarding case referral at the ideal time, 65.18% responded that sometimes the cases that need growth modification are referred at the ideal time, against 23.21% that are rarely referred at the ideal time. e applied wearing regimen for the removable functional appliances was 54.55% full time, excluding meal times, while 40% preferred the part-time regimen. To assess patient acquiescence with removable functional appliance therapy, a diary or chart is only applied by 31.82% of the participants.
About 98.18% of the participants used the removable functional appliances as retainers if worn less than required, and the highest retention period extends between 4 and 6 months, and 72.73% made adjustments to these appliances (Table 3).

Discussion
Functional appliances are orthodontic appliances used to modify the growth and establish the normal function of the perioral muscles. eir effects are primarily dentoalveolar [8]. ese appliances could be classified into four categories, namely, the passive tooth-borne like activator and bionator, the active tooth-borne, e.g., twin block, fixed functionals, the tissue-borne like Frankel regulators series, and the combined one as the hybrid appliance [15].
By using these appliances at the appropriate time indicated that patients may reduce the necessity for future orthognathic surgeries. Hence, the assessment of the preference and use of functional appliances among Iraqi orthodontists is the aim of the current study, which is considered the first in Iraq and the Middle East and the third in the world after Chadwick et al. [13] in the U.K. and Bahar et al. [14] in Malaysia.
An invitation to participate in this study was sent to about 200 Iraqi orthodontists. Just 122 orthodontists participated with a 61% response rate.
is is lower than Chadwick et al. [13], which was 87.7%, and higher than Bahar et al. [14], which was 39.3%. e gender distribution   International Journal of Dentistry was nearly equal, with the majority awarded a master's degree in orthodontics. About 70% of the participants worked in private and public clinics (Table 1). Among Iraqi orthodontists, a high rate (91.8%) used functional appliances to treat different malocclusions, as these appliances are efficient in the early correction of some skeletal problems. is percentage is comparable to that in previous studies [13,14]. e cause of not using it by 8.2% of participants was either lack of experience or poor patient cooperation; 60% of those would refer the patient to another orthodontist, while the remaining percent preferred other treatment options rather than functional appliances ( Table 2). Table 3, among 112 participants who used the functional appliances, 73.21% preferred using removable functional appliances, which can be explained by the low cost of this type, good patient compliance, and more control of oral hygiene when compared to the fixed type, while about 25% preferred both removable and various types of fixed appliances, and only two participants used the fixed type utterly. ese results are similar to the results of the survey among orthodontists in Malaysia [14].

Orthodontists' Preferences of Functional Appliances in Treating Different Malocclusions. Referring to
Functional orthodontic treatment influences mandibular position and function by advancing the mandible relative to its typical resting position, altering muscular conditions, and reducing Class II disparity [7,16]. Concerning the current survey, most of the participants preferred the use of various types of appliances; specifying the appliance type, monobloc and myobrace are the most popular functional appliances among Iraqi orthodontists before or at the maximum growth spurt, followed by the twin block appliance, which disagreed with other studies from different communities that clarify the preference of twin block appliance due to its high efficiency by keeping the jaw in a forward posture to induce favorable growth of the condyle and hence correction of Class II malocclusion [13,14]; this difference might be simply due to orthodontists preference or to poor available laboratory techniques in Iraq.
For managing Class III malocclusion, facial growth modification is considered an effective method of managing jaw inconsistencies in growing children with dentofacial orthopedic appliances, including the face mask to protract the maxilla and the Frankel functional regulator III appliance [17]; moreover, a mixed anchored palatal expander can give beneficial effects in treating class III skeletal problem [18]. As shown by the results of this study, myobrace and Frankel III are the first and second treatment options by most orthodontists, followed by monobloc and bionator, as early as detected and before the maximum growth spurt prior to the closure of the circum-maxillary sutures, to get the full benefit of growth modification and to decrease the chances of future surgical intervention.
Regarding bad oral habit management, the answers to questions showed that the highest preferred appliance is the myobrace, which could be due to its modernity, well-observed results, acceptable patient compliance, in addition to no need for laboratory work of this ready-made appliance, and the other preferred appliance is lip bumper. At the same time, the least preferable one is the oral screen, as it is the most annoying appliance for patients. Reviewing Figure 1, the main limitations with removable functional appliances are the compliance and the age of the patients at the time of treatment. Moreover, the availability of laboratory International Journal of Dentistry support, especially for Frankel appliances and twin blocks, is also a limiting factor. On the other hand, the limiting factors with the fixed functional appliance are the availability of the appliance and the experience of the orthodontists ( Figure 2). So, training programs for lab technicians should be scheduled to take updated information regarding the fabrication of twin blocks and different types of Frankel appliances.

Treatment Protocol.
Any orthodontic device is more effective if patients can adapt to it immediately and consistently find it easy to use. If an appliance does not allow for quick acclimation and convenience of usage, patients are unlikely to be compliant, resulting in ineffective orthodontic movements and increased treatment time; assessing appliance acceptance is crucial for assuring compliance and, ultimately, treatment efficacy [17]. According to the participants of this study, the twin block appliance is the best when regarding patient compliance, followed by the fixed functional appliance, which agrees with other surveys in the UK [13] and Malaysia [14]; the other two appliances with relatively high patient compliance are the myobrace and monobloc, and on the other hand, bionator and Frankel appliances are the least tolerated by the patients.
Estimation of skeletal maturation is an essential requirement of a functional appliance treatment plan; the participants of the current survey relied primarily on clinical appearance as it requires the least cost and effort, followed by radiological methods, either lateral cephalometric radiography or orthopantomography, while only 11 participants out of 112 referred their patients for handwrist radiography to achieve this purpose, and despite its efficiency in determining skeletal maturation, this low number could be due to increased awareness of the hazards of X-ray, so getting maximum benefits of already available radiographs of the cases without the need for further radiation exposure.
Only a small percentage of orthodontists (11.61%) stated that growth modification cases are frequently referred for treatment at an ideal time, which agreed with the results of the Malaysian survey [14]. In comparison, the majority of participants (65.18%) claimed that this type of case is sometimes referred to as an ideal time, and the remaining (23.21%) percent rarely received these cases at the ideal time; this requires a definite increase in public awareness about the benefit of early intervention and monitoring growth modification cases, including TV programs and social media activities [11,12].

International Journal of Dentistry
Considering the functional appliance wear regime, the higher percentage of participants preferred a full-time regime not including meal times in order to ensure that the appliance will not break from hard food; on the other hand, the remaining part preferred a part-time regime, while the least percent preferred full-time regime including meal times. e results of the Malaysian survey [14] confirmed that a full-time wear regime is most dependable.
Despite the worries of orthodontists about wearing the appliance by the patient according to the described regime, only one-third of participants set a chart to evaluate patient compliance with removable functional appliance therapy. At the same time, the majority (68%) considered this tool inapplicable, indicating the need to improve patient education to enhance cooperation and get better results.
Nearly all participants are aware of the relapse problem who followed the treatment by using removable appliances, so they instruct their patients to wear the appliance as a retainer for a relatively acceptable period, mostly 4-6 months, which is different from the retention period applied by Malaysian orthodontists, who preferred 2-3 months of appliance wear after active treatment.
Orthodontic therapies are frequently lengthy, mainly when undesirable side effects arise and the practitioner does not detect them for several months [19]. In order to save time and avoid or, at least, limit the effects of unanticipated complications, it is essential to monitor the process of treatment strictly, regardless of the employed technique [20]; this is also applicable when using removable functional appliances, so the continuous adjustment of removable functional appliances is an important step to ensure its retention inside the patient mouth, with continuous monitoring of the treatment effect; fortunately about 72% of participants are aware of the importance of this step.
One of the study limitations that must be taken with vigilance is that the responses from the participants might not reproduce the attitudes and practices of all orthodontists in Iraq; moreover, the lab staff should be trained well to fabricate twin blocks because of the wide popularity of this appliance worldwide in addition to its advantages over other appliances.

Conclusions
e removable functional appliances are the most used ones. More theoretical and clinical training about fixed functional appliances is required for Iraqi orthodontists. Experienced technicians in twin blocks and advanced lab technologies are also needed. Moreover, continuous education programs regarding functional appliances should be arranged to review this topic and its update.

Data Availability
e data used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest
e authors declare that they have no conflicts of interest.

Authors' Contributions
Hiba M. Hussien formulated the methodology, conducted investigation, wrote the original draft of the manuscript, critically reviewed intellectual contents, and approved the final version to be published. Zena Hekmat Altaee critically reviewed intellectual contents and approved the final version to be published. Mohammed Nahidh conceptualized the study, formulated the methodology, curated data, obtained resources, wrote the original draft of the manuscript, reviewed and edited the manuscript, performed project administration, critically reviewed intellectual contents, and approved the final version to be published. Sajid Chaffat Auliawi Al-Mayahi conducted investigation, critically reviewed intellectual contents, and approved the final version to be published.