Solutions of the Force-Free Duffing-van der Pol Oscillator Equation

A new approximate method for solving the nonlinear Duffing-van der pol oscillator equation is proposed. The proposed scheme depends only on the two components of homotopy series, the Laplace transformation and, the Padé approximants. The proposed method introduces an alternative framework designed to overcome the difficulty of capturing the behavior of the solution and give a good approximation to the solution for a large time. The Runge-Kutta algorithm was used to solve the governing equation via numerical solution. Finally, to demonstrate the validity of the proposed method, the response of the oscillator, which was obtained from approximate solution, has been shown graphically and compared with that of numerical solution.


Introduction
Considerable attention has been directed toward the solution of oscillator equations since they play crucial role in applied mathematics, physics, and engineering problems.In general, the analytical approximation to solution of a given oscillator problem is more difficult than the numerical solution approximation.Many powerful methods for solving nonlinear oscillator problems were appeared in open literature, such as variational iteration method 1-3 , homotopy perturbation method 4-6 , Hamiltonian method 7 , Lindstedt-Poincare method 8 , Variational method 9, 10 , parameter-expansion method 11 , max-min approach 12 , iterative harmonic balance method 13 and differential transformation method 14 .

International Journal of Differential Equations
Our main concern in this paper is to study the dynamics of approximate solution for the Duffing-van der pol oscillator equation of the form 15 Mukherjee and colleagues 16 employed the differential transformation method to solve the Duffing-van der pol equation 1.1 .Since there are some limitations in using the differential transformation method together with the fact that this method gives the solution in a very small region, developing the method for different applications is very difficult.
In the present study, we used a modified version of homotopy perturbation method which is based on two components of homotopy series.In order to improve the accuracy of the solution, we first apply the Laplace transformation, then convert the transformed series into a meromorphic function by forming the Padé approximants, and finally adopt an inverse Laplace transform to obtain an analytic solution.
Next, Runge-Kutta's RK algorithm has been introduced to solve the governing equation 1.1 .Finally, numerical examples are given to demonstrate the validity of the proposed method, and the effect of parameters on the accuracy of the method is investigated.Here, we also point out that for α −ε, γ ε, β ε, and λ 0, 1.1 reduces to a classical van der pol equation ü ε u 2 − 1 u u 0. 1.4

Analysis of New Homotopy Perturbation Method
Let us consider the nonlinear differential equation: where A is operator, f is a known function, and u is a sought function.Assume that operator A can be written as where L is the linear operator and N is the nonlinear operator.Hence, 2.1 can be rewritten as follows: We define an operator H as where p ∈ 0, 1 is an embedding or homotopy parameter, v z; p : Ω × 0, 1 → R, and u 0 is an initial approximation of solution of the problem in 2.4 which can be written as Clearly, the operator equations H v, 0 0 and H v, 1 0 are equivalent to the equations L v −L u 0 0 and A v − f z 0 , respectively.Thus, a monotonous change of parameter p from zero to one corresponds to a continuous change of the trivial problem L v −L u 0 0 to the original problem.Operator H v, p is called a homotopy map.Next, we assume that the solution of equation H v, p can be written as a power series in embedding parameter p, as follows: Now let us write 2.5 in the following form: By applying the inverse operator, L −1 , to both sides of 2.7 , we have Suppose that the initial approximation of 2.1 has the form where a n , n 0, 1, 2, . ... are unknown coefficients and P n z , n 0, 1, 2, . ... are specific functions on the problem.By substituting 2.6 and 2.9 into 2.8 , we get

2.10
Equating the coefficients of like powers of p, we get following set of equations:

2.11
Now, if we solve these equations in such a way that v 1 z 0. Therefore, the approximate solution may be obtained as

Implementation of the Method
To obtain the solution of 1.1 by NHPM, we construct the following homotopy:

3.2
The solution of 1.1 is to have the following form: Substituting 3.3 in 3.2 and equating the coefficients of like powers of p, we get following set of equations:

3.4
International Journal of Differential Equations 5 Assuming u 0 t 8 n 0 a n P n , P k t k , as well as solving the above equation for U 1 t , leads to the following result: 3 12

3.6
Therefore, we obtain the solutions of 3.4 as The solution of 1.1 does not exhibit behavior for a large region.In order to improve the accuracy of the two-component solution, we implement the modification as follows.
Applying the Laplace transform to the series solution 3.7 yields For simplicity, let s 1/t; then, On applying m, n Padé approximation, Recalling t 1/s, we obtain m, n Padé approximation in terms of s.By using the inverse Laplace transform to the m, n Padé approximant, we obtain the desired approximate solution of the Duffing-van der pol equation.

Numerical Solutions
In order to verify the procedure of the method, we consider the following particular cases and comparison will be made with RK4 method as well as 16 .

4.2
The approximate analytical solution of 4.1 with conditions 4.2 can be obtained by applying the procedure mentioned in previous section as u t −0.000026166e −4.09188t − 0.00212777e −2.16516t − 0.0266831e −1.06495t − 0.259843e −0.334316t .

4.3
In Table 1, the results of proposed method are compared to DTM and the fourth-order Runge-Kutta method.For comparison, the displacements of the oscillator corresponding to the four different methods are depicted in Figures 1 a - With initial conditions, u 0 1, u 0 0.

4.5
The solution of 4.1 with conditions 4.5 exhibits the periodic behavior that is the characteristic of the oscillatory system.A comparison between the approximate solution and the solution that is obtained by the fourth-order Runge-Kutta method in Figures 2 a and

Closing Remarks
In this work, the modified NHPM has been employed to analyze the force-free Duffingvan der pol oscillator with strong cubic nonlinearity.The results obtained from this method have been compared with those obtained from numerical method using RK algorithm and 15, 16 .This comparison shows excellent agreement between these methods.The presented scheme provides concise and straightforward solution to approach reliable results, and it overcomes the difficulties that have been arisen in conventional methods.Unlike the ADM, VIM, and HPM 17-20 , the modified HPM 21 is free from the need to use the Adomian polynomials, the Lagrange multiplier, correction functional, stationary conditions, and calculating integrals.The present method is very simple method, leading to high accuracy of the obtained results.

- 17 ü α βu 2 u − γu λu 3 and taking λ 1 .
denotes differentiation with respect to time, α, β, γ, and λ are arbitrary parameters.Equation 1.1 is an autonomous equation which describes the propagation of voltage pulses along a neural axon.Some progress was made on the integrability of the Duffing-van der pol equation 1.1 until Chandrasekar and coworkers 15 established the complete integrability of this equation and derived a general solution for a specific choice of arbitrary parameters α, β, γ, given by Under the specific choice of parameters 1.3 and using a special transformation, Chandrasekar et al. were able to find the solution of this equation.

Figure 3 :
Figure 3: Comparisons for u versus u trajectory of the Duffing-van der pol equation a RK4, b present method.