International Journal of ZoologyVolume 2012 (2012), Article ID 493420, 23 pagesdoi:10.1155/2012/493420

Research Article

Mouthpart Morphology of Three Sympatric Native and Nonnative Gammaridean Species: Gammarus pulex, G. fossarum, and Echinogammarus berilloni (Crustacea: Amphipoda)

Gerd Mayer, Andreas Maas, and Dieter Waloszek

Workgroup Biosystematic Documentation, University of Ulm, Helmholtzstrasse 20, 89081 Ulm, Germany

Received 13 July 2011; Accepted 6 September 2011

Academic Editor: Thomas Iliffe

Copyright © 2012 Gerd Mayer et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

In the last 20 years several nonnative amphipod species have immigrated inland waters of Germany and adjacent central European countries. Some of them have been very successful and could establish stabile populations. In some places, they have even replaced native or earlier established species. The gammarid Echinogammarus berilloni originates from the Atlantic region of France and the north-western part of Spain and coexists in some central European waters with the native Gammarus pulex and G. fossarum. Here, we describe and compare the mouthparts and other structures involved in food acquisition of these three sympatric gammaridean species. Our hypothesis was that differences in the mode of feeding of the three species could be the reason for their coexistence and that these differences would be expressed in differences in mouthpart morphology. The results of our SEM study demonstrate that there are indeed interspecific differences in details of the morphology of the feeding structures. This is especially true for the setation of antennae, maxillulae, gnathopods, and third uropods, which can be interpreted as adaptations to special modes of feeding. Generally, all three species are omnivorous, but specializations in details point to the possibility to use some food resources in a special effective way.

1. Introduction

The gammaridean fauna of middle European inland waters has dramatically changed in the last two decades; particularly, Ponto-Caspian gammarideans arrived in middle European rivers, canals, and lakes [1–11]. Immigration has happened and is still ongoing via three main corridors: (i) along the Danube, Main-Donau Canal and Main into the Rhine system; (ii) via the Pipet-Bug connection from the east, and from the north and along the Baltic coast via ships [12]; (iii) also from the Mediterranean region, freshwater gammarideans have enlarged their range of distribution towards western and middle Europe [5, 13–16]. Some of these nonnative gammaridean species could establish stabile populations and occur in high densities, and several species have a severe impact on the ecology of the invaded regions by reducing and even eliminating native and earlier established gammaridean species (therefore, the immigrants are called invasive).

One well-examined example of such invasive species is Dikerogammarus villosus (Sowinsky, 1894) [17]. This species is now the dominant gammaridean species in many rivers, canals, and larger lakes all over central Europe, affecting also other members of the macrozoobenthos [1, 6, 18–20]. But not all nonnative species are invasive, and invasive species are, vice versa, not always able to eliminate native species in every habitat. Under certain conditions, coexistence of native and nonnative species may be possible. In some places, even the very successful invasive species D. villosus occurs together with other species in the same waters. In Lake Constance, Germany, for example, no less than four sympatric species can be found: the invasive D. villosus, the earlier established Gammarus roeselii Gervais, 1835 [21], the native Gammarus lacustris Sars, 1863 [22], and the recently discovered Crangonyx pseudogracilis Bousfield, 1958 [23]. In this lake, like in other waters with a diverse amphipod fauna, coexistence of these closely related species may be possible because it is rich in its ecological structure, that is, by offering different microhabitats, which can be inhabited by different species according to their substrate preferences [10, 24–34]. But also different food preferences might be a factor, which enables individuals of these species to cooccur in the same habitat. If sympatric species are specialized to feed on different types of food, we hypothesize that such specializations should be expressed in the morphology of their mouthparts.

Therefore, we investigated the mouthparts and other structures involved in food acquisition of the three gammarideans Gammarus fossarum Koch in Panzer, 1836 [35], G. pulex (Linnaeus, 1758) [36], and Echinogammarus berilloni (Catta, 1878) [37] using scanning electron microscopy (SEM). These three species, the two native Gammarus species and E. berilloni, originating from the Atlantic region of France and Spain, occur sympatrically in some middle European rivers, such as the river Meuse in France and Belgium [9], the Viroin, Belgium [38], and in a karstic stream system in the Paderborn Plateau, Westphalia, Germany [39]. Moreover, G. pulex and E. berilloni are sympatric in a Rhine tributary near Iffezheim, Germany [30], in smaller rivers in Brittany, France [10], and in the Loire and its tributaries, Region Centre, France [40]. Sympatric occurrences of G. pulex and G. fossarum have been reported from some waters in Germany, for example, Fulda-Elder Basin [41], Schlitz [42], and from a forest brook, Rimbach [43]. However, in most waters, the populations of these two species live separately, with G. fossarum inhabiting springs and the upper reaches of small streams and rivers and tolerating high current and lower temperatures, whereas G. pulex prefers sections of brooks and smaller rivers with lower currents [44, 45].

Because these three species are closely related, we do not expect major differences in the morphology of their mouthparts, but more likely modifications in detail should be found, for example, size and shape of particular structures and, in particular, differences in limb setation as signs of specialization to a specific kind of food. Such morphological modifications of the mouthparts have already been demonstrated for G. roeselii and D. villosus [46]. We therefore aimed at investigating the mouthpart morphologies of the three mentioned species. We expect specific differences that enable the species to live sympatrically on an, at least, slightly different food source that would explain their coexistence.

2. Material and Methods

Specimens of Gammarus pulex were obtained from a spillway of a gravel pit filled with groundwater, draining into a side canal of the river Danube near Ulm (N 48° 18′ 40.5′′, E 9° 52′ 9.9′′) in 04/2007. Specimens of G. fossarum were collected from the river Nau near Langenau (N 48° 30′ 3.4′′, E 10° 8′ 18.7′′) in 07/2008. Specimens of Echinogammarus berilloni were obtained from the collection of Gerhard Maier, Senden, collected in 05/2004 from a Rhine tributary near Iffezheim (N 48° 50′ 15′′, E 8° 7′ 11.9′′). For identification of species, the taxonomic key of Eggers and Martens [47, 48], the original taxonomic descriptions, and redescriptions were used [14, 35–37, 49–51]. Macrophotographs of specimens stored in 70% ethanol were taken with a Canon Macro Photo Lens EF-S 60 mm mounted on a Canon EOS 450D digital camera. Specimens were illuminated with cold-light lamps. For reducing reflections, both the lamps and the lens were equipped with polarizing filters.

For SEM studies, approximately 30 adult males of each species were anesthetized with carbon dioxide by adding a small amount of sparkling mineral water and fixed and stored in 70% ethanol. After dissection, debris was removed from the specimens by using an ultrasonic cleaner. The specimens were dehydrated in an alcohol series, critical-point dried, and sputter-coated with a mixture of gold and palladium. SEM work was performed with a Zeiss DSM 962 scanning electron microscope of the Central Unit Electron Microscopy at the University of Ulm. Digital images obtained from the SEM were trimmed in Adobe Photoshop, and plates were arranged using Adobe Illustrator.

3. Results

Besides the mouthparts (mandibles, maxillulae, maxillae, maxillipeds; also considered are the paragnaths), we also describe several more structures, which are involved in food acquisition and are of potential significance. These are the antennulae, the antennae, the third pair of uropods, and the first and second pairs of gnathopods. We start the description with the latter appendages. All specimens illustrated and described herein are adult males. Description is complete for the first species, while we applied an abbreviated style thereafter to focus on differences and cut descriptions short.

3.1. Gammarus pulex (Linnaeus, 1758) [36] (Figure 1(a))

Figure 1: Photographs of males of (a) Gammarus pulex; (b) Gammarus fossarum; (c) Echinogammarus berilloni.

The antennulae (Figure 2(a)) are about half as long as the body of the animal. They consist of a three-jointed peduncle and a 23-jointed flexible flagellum. In addition, a short five-part accessory flagellum is present at the junction of peduncle and flagellum. The proximal portion of the peduncle is the longest; the distal portion is slightly more than half as long as the second. Setation of both peduncle and flagellum is short and sparse.

Figure 2: : SEM images of antennulae and antennae: (a–c) right antennula in median view of (a) Gammarus pulex, (b) Gammarus fossarum, and (c) Echinogammarus berilloni; (d–f) right antenna in median view of (d) G. Pulex, (e) G. Fossarum, and (f) E. berilloni; (g) proximal part of right antenna of G. pulex in posterior view; (h) proximal part of flagellum of right antenna of G. fossarum in median view; (i) flagellum of left antenna of E. berilloni in posterior view. af: accessory flagellum; bas: basipod; cal: calceolus; cox: coxa; f: flagellum; gc: gland-cone; 1, 2, 3, 4, 5: number of podomeres of peduncle.

The antennae (Figure 2(d)) are shorter than the antennulae. They consist of a two-part proximal section, the protopod with coxa and basipod, and a distal endopod. The endopod is made up of three long tubular portions and a flagellum consisting of 16 annuli. The annuli of the flagellum are anteroposteriorly flattened and broadened in mediolateral dimension. The posterior surface of the proximal 12 flagellar annuli is armed with a transverse row of about 12 long simple setae, together forming a kind of flag-like brush. Moreover, each flagellar annulus 2 to 11 bears one calceolus on their medioposterior margin (Figure 2(g)). The distal 4 annuli are only weakly setated. The (excretory) gland cone on peduncle segment 2 is rather long, nearly reaching the distal end of peduncle segment 3.

In contrast with the styliform first and second pairs of uropods, those of the third pair (Figures 3(a) and 3(b)) are foliaceous and articulate more flexibly. The one-part endopod is shorter than the bipartite exopod with its small second distal part. In G. pulex, the endopod reaches about 3/4 of the length of the proximal part of the exopod (Figure 3(a)). Most of the setae on the median and lateral margin of endopod and exopod are plumose (with setulae in two opposing rows along the shaft of the seta) (Figure 3(b)). The two slender lobes of the deeply notched telson overhang the peduncles of the third uropods. Their distal ends are armed with two spines and about 5 long simple setae each (Figure 3(a)).

Figure 3: SEM images of telson and third uropods: (a) telson and third pair of uropods of G. pulex in situ in dorsal view; (b) exopod of left third uropod of G. pulex in anterior view; (c) telson and third pair of uropods of G. fossarum in situ in dorsal view; (d) exopod of left third uropod of G. fossarum in posterior view; (e) telson and third pair of uropods of E. berilloni in situ in dorsal view; (f) exopod of left third uropod of E. berilloni in anterior view. Arrows indicate presence or absence of plumose setae.

The first two pairs of pereiopods (=2nd and 3rd pairs of thoracopods) are modified to subchelate gnathopods. Mainly because the ischium has the shape of an elbow, the gnathopods are flexed anteriorly, covering the mouthparts ventrally with their distal four podomeres. The propodus of the first gnathopods (Figure 4(a)) is piriform. The curved dactylus is slightly more than half as long as the propodus. The propodus of the second gnathopods (Figures 4(b) and 4(c)) is less piriform, nearly rectangular. The dactylus is arranged almost transverse. Setation of the second gnathopods is much denser and the setae are much longer than in the first gnathopods. Carpus and propodus bear many groups of long and distally curved setae on their margins. These setae are directed medioventrally in the natural position of the gnathopods.

Figure 4: SEM images of distal part of gnathopods: (a) right first gnathopod of G. pulex in anterior view; (b) left second gnathopod of G. pulex in posterior view; (c) left second gnathopod of G. pulex in anterior view; (d) right first gnathopod of G. fossarum in anterior view; (e) left second gnathopod of G. fossarum in posterior view; (f) left second gnathopod of G. fossarum in anterior view; (g) right first gnathopod of E. berilloni in anterior view; (h) left second gnathopod of E. berilloni in posterior view; (i) left second gnathopod of E. berilloni in anterior view. Abbreviations other than in previous figures: c: carpus; d: dactylus; p: propodus.

The maxillipeds (=first pair of thoracopods) (Figures 5(a)–5(d)) are bent anteriorly in their natural position, covering most of the other mouthparts and the labrum (Figure 5(a)). Their coxae are fused medially, so that they act as one unit for feeding and handling food. The basipods stem from a triangular socket, built by the fused coxae. Each basipod is medially drawn out into a distally directed spatulate endite (Figure 5(b)). The five-partite endopods are well developed. The first portion, the ischium, of each side also bears a distally directed spoon-shaped endite. The remaining four portions of each endopod build two opposing “palps.” Their distal portions, the dactyli, taper into medially directed claw-like spines.

Figure 5: SEM images of maxillipeds and paragnaths of Gammarus pulex: (a) maxillipeds in posterior view; (b) maxillipeds in anterior view; (c) distal setation of endite of left basipod in anterior view (cf. eb in (b)); (d) median setation of endite of right ischium in posterior view (cf. ei in (a)); (e) paragnaths in posterior view; (f) paragnaths in anterior view. Abbreviations other than in previous figures: eb: endite of basipod; ei: endite of ischium; i: ischium; m: merus.

Basipod, ischium, and merus of the maxilliped bear one group of six to seven simple setae on their posterior sides each. Several groups of medioposteriorly directed simple setae are sited on the posteromedian margins of carpus and propodus (Figure 5(a)). On their anterior sides, the median margins of the endites of the basipods are bent anteriorly, together forming a keel-like elevation. Here several long pappose setae (with setulae randomly arranged along the shaft) are sited, which are anteriorly directed (Figure 5(b)). The distal end of each basipodal endite is, on their anterior sides, armed with a row of distally directed short pappose setae (Figure 5(c)). In addition, four distally directed tooth-like cuspidate setae insert on the medial section of the distal margin of each endite. The endite of each ischium bears a row of mediodistally directed, flattened, and hook-shaped cuspidate setae on the posterior side of its medial margin (Figure 5(d)). This row is accompanied by two rows of short, tape-like setae on each endite.

The small coxal elements of the maxillae (Figure 8) arise from a common sternal elevation (Figures 8(a) and 8(b)). The coxae are predominantly membranous and do not give rise to any enditic extensions. The basipod is medially drawn out into a distally pointing spatulate endite, the so-called “inner plate.” Additionally, the so-called “outer plate,” possibly representing the endopod, stems from the outer side of each basipod. The median margin of the inner plate carries three rows of setae. The anterior row of setae curves from the median margin onto the anterior surface of the inner plate towards the distal margin of the inner plate (Figure 8(b)). The shafts of these setae are on their lateral and posterior sides equipped with long thin setulae (Figure 8(d)). The medio-distally pointing setae of the posterior row are short, straight, and bear only scale-like setulae on one side of the distal third of their shafts. The median row comprises pappose setae. The median and posterior rows of setae follow the margin along the distal end of the inner plate. As a result of that, these setae change their shape. Those of the posterior row become more and more similar from proximal to distal to those of the other plate, those of the median row are only partly equipped with scale-like setulae. The outer plates are movable in the mediolateral plane and partly cover the smaller inner plates posteriorly (Figure 8(a)). On their distal margin, each outer plate is armed with two rows of setae (Figure 8(c)). The setae of the anterior row are flattened and bear no setulae. The shafts of the setae of the posterior row are, on their distal third, flattened and equipped with closely arranged, triangular lobes.

The maxillulae (Figure 11) consist of a coxa, inner plate, outer plate, and palp (Figures 11(a) and 11(b)). The spherical coxa inserts in an ample membrane on the cephalothorax with plenty of muscle fibres (Figure 11(b)). The distally directed coxal endite, the so-called “inner plate,” has the shape of an isosceles triangle in anterior and posterior perspective (Figure 11(c)). It stems from the coxa with a small and short connexion. It bears a row of medio-distally directed long pappose setae on its longer median margin. In their natural position, the coxal endites of the two maxillulae look like two opposing hand brushes, building a dense net. The basipods are anteriorly directed in their natural position. The articulation with the coxa allows movement in medio-lateral plane. The basipod carries a broad spatulate endite medio-distally. The compound of basipod and its endite is traditionally termed “outer plate.” The latter is anteroposteriorly flattened with a concave anterior side and a convex posterior side. The distal margin of the basipodal endite is armed with 10 very robust, medio-distally directed cuspidate setae which are arranged in two rows (Figures 11(e) and 11(f)). Each of these setae, for their part, is armed with one row of up to 12 medio-posteriorly directed secondary spines. Along the distal margin of the outer plate, the number of secondary spines of the setae decreases from median to lateral of the row of setae. Therefore, the median setae look like coarsely elaborated combs with up to 12 prongs, whereas those of the lateral parts of the rows are equipped with three finger-like secondary spines (Figure 11(f)). The sockets of these robust cuspidate setae are still membranous and therefore elastic. The maxillular palp, the endopod, consists of two portions (Figure 11(b)). The proximal portion is small and cylindrical, whereas the distal portion is nearly four times as long, flattened, and medially bent. The spatulate distal portions of the endopods of the left and right maxillulae are asymmetric. That of the right one is broader and its distal margin is armed with a row of six stout, triangular, tooth-like, cuspidate setae. They are accompanied by two conical setae on the anterior end of the row (Figure 11(e)). In contrast, on the left endopod, there is a row of eight robust, conical setae on the distal margin flanked by five simple setae posterodistally (Figure 11(f)).

The paragnaths (Figures 5(e) and 5(f)), traditionally often termed “lower lip,” are a pair of flap-like, medially fused extensions of the sternum of the mandibular segment. The paragnaths are the posterior limitation of the mouth area and they build, together with the labrum, the space in which the mandibles operate. There is a deep cut between the two flaps. In this region, the flaps are armed with a dense field of short, thin, and scaled setae. On the anterior side (Figure 5(f)), near the entrance to the oesophagus, there are two depressions, in which the molars of the mandibles fit, when these are adducted. On their posterior side (Figure 5(e)), the paragnaths are drawn out into a proximolaterally directed cusp on each side. The flaps of the paragnaths are asymmetric, with the left being slightly wider than the right in proximodistal extension. This corresponds with the asymmetry of the mandibles. In all three species investigated here, the paragnaths are very similar. In G. pulex, the proximo-laterally directed cusps are slender, elongated, and pointed. The distal and proximolateral margins of the paragnaths are curved.

The mandibles (Figure 14) comprise a prominent proximal portion, the coxa and a distal portion, the palp consisting of the basipod, and a two-segmented endopod (for overview see, Figure 16(a)). In their natural position, only the distal part of the coxa surmounts the labrum (Figures 14(a) and 14(b)). The coxa is medially drawn out into a proximodistally extending protrusion. This gnathal edge is divided into a distal pars incisiva (or incisor process), a lacinia mobilis, a spine row, and a proximal pars molaris (or molar process) (Figures 14(c) and 14(d)). There is a distinct asymmetry of left and right mandible and their components. On the right mandible, the whole coxal body as well as the gnathal edge is smaller in proximo-distal extension than on the left mandible. Also the angles, in which the molar surfaces are oriented, are different, being nearly rectangular on the left, but about 60° on the right mandible (Figure 14(b)). The left incisor is stout and five toothed. The well-developed stout and broad left lacinia mobilis is blade shaped and four toothed. The base of the lacinia mobilis is slightly protruded against the incisor. This so-called articular condylus reaches into a cavity on the base of the incisor (Figure 14(b)). On the posterior side of the lacinia, the articular condylus is well developed, whereas on the anterior side, it cannot be detected, when the lacinia mobilis is in its upright position parallel to the incisor (Figures 14(c) and 14(d)). The right incisor is stout and four toothed. The right lacinia mobilis is smaller than the left, and its articular condylus is poorly developed and visible only in posterior aspect. The right lacinia mobilis is distally notched, therefore divided into two distal parts which are arranged parallel to the incisor (Figure 14(d)). The part adjacent to the incisor is slightly bent inwards; its distal edge consists of 3–5 small spines flanked by two somewhat longer lateral spines. The other part is longer and nearly straight; its edge consists of 4–6 spines which are homogeneous in size. The setae of the spine rows are directed mediodorsally in situ (Figure 14(b)). Each spine row directly starts at the molar with a group of short pappose setae, together building a tuft of fine hair-like setae. Towards the incisor, the setae of the spine row successively change from pappose with setulae on the entire shaft to spinelike with only few setulae on the distal end of their shafts. These setulae are located on the proximal side of the shaft facing the molar and are distally directed. All setae of the spine row are, at least their proximal part, flattened and therefore band shaped. This shape only allows deflexion of the setae in the plane between incisor and molar (Figures 14(c) and 14(d)). The succession of setae is more distinct on the spine row of the right mandible. Here, some of the setae are stiletto shaped with very broad bases.

The anterior side of each molar bears a single gnathobasic seta pointing anteromedially into the oesophagus in the live animal (Figures 14(c) and 14(d)). The left molar area is kite shaped in median view, whereas the right is more ellipsoidal. The molar surface is slightly concave with parallel edges, which are arranged vertically to the gnathal edge (Figure 14(e)). These edges are probably built by laterally conjoined feathered setae with free setulae only on one side. Therefore, an alternating sequence of hard compact cuticular mass and flexible separate setulae together builds the rasp-like structure of the surface of the molars (Figure 14(f)). On the surface of the right molar, these free setulae are directed proximally, those of the left molar distally. The short first portion of the mandibular palp, the basipod, is cylindrical and bears no setae. The mediolaterally compressed proximal portion of the endopod is about three times as long as the basipod. It is armed with a row of simple setae on the lateral side of its posterior margin. These setae are becoming longer towards the distal end of this row. The distal portion of the palp is also medio-laterally compressed and has about two-thirds of the length of the second portion. Its tip is armed with a group of simple setae, the longest being nearly as long as the distal portion. The posterior margin of the distal portion bears a regular row of setae. These setae are adorned with medio-distally directed setulae on their distal halves. On the lateral and median surface of the distal portion of the palp, there is one, in some of the investigated specimens two, groups of up to five simple setae and a dense field of short hair-like setae near its posterodistal margin of the lateral surface (compare Figures 16(g) and 16(h)).

3.2. Gammarus fossarum Koch in Panzer, 1836 (Figure 1(b))

Antennulae (Figure 2(b)): almost half as long as body; second portion of peduncle about twice as long as distal portion, proximal portion nearly as long as second and third portion together; flagellum 29-partite; accessory flagellum consisting of 4 annuli; setation of flagellum and peduncle poorly developed.

Antennae (Figure 2(e)): shorter than antennulae; gland-cone pointed, nearly reaching the distal end of peduncle segment 3; flagellum slender, consisting of 13 tubular annuli; each annulus with two transversely arranged groups of 2–5 simple setae on median and lateral side, respectively; one calceolus present on median side of each flagellar annulus 1–7 (Figure 2(h)).

Third uropods: endopod about half as long as exopod (Figure 3(c)); most of the setae on the median margin of both endopod and exopod plumose; lateral margin of exopod bears simple setae; here, if any, only scattered plumose setae (Figure 3(d)); lobes of telson only little longer than peduncles of third uropods (Figure 3(c)).

Gnathopods (Figures 4(d)–4(f)): propodus of first gnathopod (Figure 4(d)) very similar to that of G. pulex; dactylus not as strongly curved as in G. pulex, more than half as long as propodus; shape and setation of second gnathopod (Figures 4(e) and 4(f)) closely resemble those of G. pulex.

Maxillipeds (Figures 6(a)–6(d)): in shape and setation very similar to those in G. pulex.

Figure 6: SEM images of maxillipeds and paragnaths of Gammarus fossarum: (a) maxillipeds in posterior view; (b) maxillipeds in anterior view; (c) distal setation of endite of left basipod in anterior view (cf. eb in (b)); (d) median setation of endite of right ischium in posterior view (cf. ei in (a)); (e) paragnaths in posterior view; (f) paragnaths in anterior view.

Maxillae (Figure 9): very similar to those of G. pulex, differences exist in details of setation; setae of posterior row of inner plate with short scale-like setulae on two opposing sides (Figure 9(d)); some setae on distal margin of inner plates with broad rounded scale-like setulae all around their shafts.

Maxillulae (Figure 12): shape of inner and outer plate (Figures 12(a)–12(c)) very similar to those of G. pulex, but distinct differences in setation of distal margin of outer plates (Figures 12(a) and 12(e)); two to three setae on lateral end of the two rows medially bent, overhanging the other comb-like setae posteriorly (Figure 12(a)); these two setae distally flattened and broadened, like chisels with three humps on distal edge (Figure 12(e)). In some of the specimens investigated, clear signs of abrasion on these two and adjacent setae were found. The setae are abraded to more than half of their length (Figure 12(f)).

Paragnaths (Figures 6(e) and 6(f)): very similar to those in G. pulex; proximo-laterally cusps not as slender and pointed as in G. pulex; distal margins medially edged.

Mandibles (Figure 15): incisors and left lacinia mobilis slender in posterior aspect but broad in anteroposterior dimension; left incisor five-toothed; right incisor four-toothed; left lacinia mobilis four-toothed, with well-developed articular condylus; right lacinia mobilis distally notched, spines on the two edges longer and more pointed than in G. pulex; articular condylus on right lacinia mobilis short but stout (Figure 15(b)); spine row of right mandible (Figure 15(d)) with one or two stiletto-shaped setae without any setulae, other setae of spine rows like in G. pulex; molar surfaces rasp-like, with regularly arranged edges (Figures 15(e) and 15(f)); lateral surface of distal portion of mandibular palp with dense field of hair-like setae which extends as long as adjacent row of setae on posterior margin.

3.3. Echinogammarus berilloni (Catta, 1878) [37] (Figure 1(c))

Antennulae (Figure 2(c)): more than half as long as the body of the animal; proximal and second portion of peduncle about twice as long as distal portion; flagellum 38-partite, annuli of flagellum slightly flattened anteroposteriorly; accessory flagellum consisting of 5 annuli; setation of flagellum and peduncle poorly developed.

Antennae (Figure 2(f)): peduncle segments 4 and 5 slender and elongate; gland-cone short; flagellum (Figure 2(i)) 20-partite, flagellum distinctly anteroposteriorly flattened and therefore broadened; setae on flagellum and peduncle short; calceoli absent.

Third uropods (Figures 3(e) and 3(f)): endopod very short compared to exopod (Figure 3(e)); exopod with groups of simple setae on median and lateral margin, those on median margin longer than laterally located ones (Figure 3(f)); distal portion of exopod short, about as long as terminal spines of proximal portion; lobes of telson compressed, little shorter than peduncle of third uropods (Figure 3(e)).

Gnathopods (Figures 4(g)–4(i)): propodus of first gnathopods (Figure 4(g)) slender; dactylus only slightly bent, with nearly straight median part; propodus of second gnathopods (Figures 4(h) and 4(i)) piriform; setae on carpus and propodus less numerous and shorter than on those of G. pulex and G. fossarum.

Maxillipeds (Figures 7(a)–7(d)): in shape and setation very similar to those of G. pulex.

Figure 7: SEM images of maxillipeds and paragnaths of Echinogammarus berilloni: (a) maxillipeds in posterior view in situ; (b) maxillipeds in anterior view; (c) distal setation of endite of left basipod in anterior view (cf. eb in (b)); (d) median setation of endite of right ischium in posterior view (cf. ei in (a)); (e) paragnaths in posterior view demonstrating also the position against labrum and mandibles in situ; (f) paragnaths in anterior view. Abbreviations other than in previous figures: lbr: labrum; md: mandible.

Figure 8: SEM images of maxillae of Gammarus pulex: (a) maxillae in situ in posterior view; (b) maxillae in anterior view; (c) distal setation of outer plate of left maxilla in posterior view; (d) median setation of inner plate of left maxilla in posterior view. Abbreviations other than in previous figures: ipl: inner plate; mxl: maxillula; opl: outer plate; ste: sternite.

Figure 9: SEM images of maxillae of Gammarus fossarum: (a) maxillae in situ in posterior view; (b) maxillae in anterior view; (c) distal setation of outer plate of left maxilla in posterior view; (d) median setation of inner plate of left maxilla in posterior view; (e) distal setation of outer plate of left maxilla in posterior view; (f) median setation of inner plate of left maxilla in anterior view.

Maxillae (Figure 10): very similar to those of G. pulex and G. fossarum; differences in details of setation; setae on lateral section of distal margin of inner plate correspond to those of outer plate with shafts flattened and equipped with closely arranged, triangular lobes on their distal third (Figure 10(c)); setae of median section of distal margin of inner plate with broad, rounded, scale-like setulae all around their shafts.

Figure 10: SEM images of maxillae of Echinogammarus berilloni: (a) maxillae in situ in posterior view; (b) maxillae in anterior view; (c) distal setation of outer plate of left maxilla in posterior view; (d) median setation of inner plate of left maxilla in posterior view.

Figure 11: SEM images of maxillulae of Gammarus pulex: (a) maxillulae in situ in posterior view; (b) left maxillula in anterior view; (c) inner plates of maxillulae in situ in posterior view; (d) median setation of inner plate of left maxillula in medio-posterior view; (e) outer plate and palp of right maxillula in anteromedian view; (f) outer plate and palp of left maxillula in posterior view. Abbreviations other than in previous figures: md plp: palp of mandible; mxl plp: palp of maxillula.

Figure 12: SEM images of maxillulae of Gammarus fossarum: (a) maxillulae in situ in posterior view; (b) left maxillula in anterior view; (c) inner plates of maxillulae in situ in posterior view; (d) median setation of inner plate of left maxillula in posterior view; (e) distal setation of outer plate of left maxillula in posterior view; (f) distal setation of outer plate of right maxillula in posterior view. Arrows indicate signs of abrasion.

Maxillulae (Figure 13): inner plates (Figure 13(c)) more oblong than triangular; median margin of outer plates (Figure 13(a)) straight; basipodal endites not as strongly bent medially as in G. pulex, 10-11 setae on distal margin of outer plate (Figure 13(d)), lateral 4 of these setae with markedly thickened shafts, distal end flattened and broadened, distal edge blunt with 2-3 humps; shafts of these 4 setae without secondary spines laterally; in some specimen, these setae display signs of abrasion (Figure 13(f)); setae of median part of distal row of setae on outer plate with up to 15 medio-posteriorly directed, pointed secondary spines (Figures 13(d) and 13(f)); the latter arranged nearly rectangular to shaft of setae and are longer than those in G. pulex; distal margin of left palp (Figure 13(e)) with 8 robust conical setae, flanked by a posterior row of 5 setae; these distally angled, with posterodistally directed setulae; distal margin of right palp (Figure 13(d)) with a row of 4-5 very robust triangular cuspidate setae; additionally on anterolateral end of row there is one conical seta and one seta which is distally provided with setulae.

Figure 13: SEM images of maxillulae of Echinogammarus berilloni: (a) maxillulae in situ in posterior view; (b) maxillulae in anterior view; (c) inner plates of maxillulae in situ in posterior view; (d) distal setation of outer plates and palps of maxillulae in anterior view; (e) distal part of palp of left maxillula in medio-posterior view; (f) distal setation of outer plate of right maxillula in posterior view. Arrows indicate signs of abrasion.

Figure 14: SEM images of mandibles of Gammarus pulex: (a) ventral view of head with exposed mandibles; maxillulae, maxillae, maxillipeds, and gnathopods removed; (b) coxa of mandibles in situ in posterior view; (c) coxa of left mandible in anterior view; (d) coxa of right mandible in anterior view; (e) molar of right mandible in median view; rectangle indicates close-up image in (f); (f) closeup of molar surface of right mandible in median view (cf. (e)). Abbreviations other than in previous figures: ant: antenna; gbs: gnathobasic seta; gnp1: first gnathopod; ip: incisor process; lm: lacinia mobilis; mp: molar process; sr: setal row.

Figure 15: SEM images of mandibles of Gammarus fossarum: (a) incisor processes, lacinia mobiles, and setal rows of mandibles in situ in posterior view; (b) incisor processes and lacinia mobiles of mandibles in situ in posterodorsal view; (c) coxa of left mandible in anterior view; (d) coxa of right mandible in anterior view; (e) molar of right mandible in medioanterior view, rectangle indicates close-up image in (f); (f) closeup of molar surface of right mandible in median view (cf. (e)). Abbreviations other than in previous figures: ac, articular condylus.

Figure 16: SEM images of mandibles of Echinogammarus berilloni: (a) left mandible in median view; (b) incisor process, lacinia mobilis, and setal row of right mandible in posterior view; (c) incisor process, lacinia mobilis, and setal row of left mandible in posterior view; (d) coxa of left mandible in anterior view; (e) coxa of right mandible in anterior view; (f) molar of left mandible in median view; (g) distal portion of left mandibular palp in median view; (h) distal portion of left mandibular palp in lateral view.

Paragnaths (Figures 7(e) and 7(f)): more angular in shape; distal margins with hump; proximo-distally pointing cusps broader than in the two Gammarus species.

Mandibles (Figure 16): incisors and left lacinia mobilis very slender in posterior aspect; left incisor five-toothed; left lacinia mobilis four-toothed, with well-developed articular condylus (Figures 16(c) and 16(d)); right incisor four-toothed; right lacinia mobilis distally notched, both distal parts straight with pointed spines of different length; articular condylus on right lacinia mobilis well developed, its cavity on the base of the incisor small but well elaborated (Figures 16(b) and 16(e)); setae of spine rows (Figures 16(b) and 16(c)) comparable to those of G. pulex; molar surfaces (Figure 16(f)) rasp-like, with regularly arranged edges; distal portion of mandibular palp (Figures 16(g) and 16(h)) with 3 groups of up to 4 simple setae, distal half of posterior margin with a row of serrate setae, tip armed with group of long serrate setae; field of dense hair-like setae on lateral side of distal portion about half as long as row of setae on posterior margin; setae on posterior margin of second portion of palp also serrated.

The main differences between the three species in morphology of mouthparts and other structures involved in food acquisition are listed in Table 1.

Table 1: Main differences in morphology of mouthparts and other structures involved in food acquisition.

Structure
Gammarus pulex
Gammarus fossarum
Echinogammarus berilloni

Antennal flagellum
Annuli medio-laterally broadened; each with a row of 12 posteriorly directed setae together building a flag-like brush
Each annulus with a group of 2–5 simple setae on median and lateral side
Antero-posteriorly flattened and therefore broadened; setation sparse; setae short

Cuspidate setae on distal margin of basipodal endites of maxillula
Lateral setae with three finger-like secondary spines
2-3 lateral setae distally flattened and broadened like chisels with three humps on distal edge
4 lateral setae with thickened shafts, distally flattened; distal margin blunt with 2-3 humps

Setation of carpus and propodus of 2nd gnathopod
Long and closely arranged setae with curled distal ends
Long and closely arranged setae with curled distal ends
Less numerous and shorter setae than in G. pulex and G. fossarum

Third uropod
Endopod 3/4 as long as exopod; plumose setae on medial and lateral margins of endopod and exopod
Endopod half as long as exopod, plumose setae on median margin of endopod and exopod; simple setae on lateral margin of exopod
Endopod very short; only simple setae on lateral and median margin of exopod

4. Discussion

Specialization on a certain kind of food such as carrion, sponges, algae, or periphyton is mainly known from marine amphipods. The mouthparts of these nutrition specialists exhibit morphological adaptation for collecting, handling, processing, and ingestion of this specific kind of food [52–60].

In context with the dramatic change of the nonmarine gammaridean fauna in central Europe, several investigations on the ecology of native and invasive species were performed. The results of these field and laboratory experiments changed our view on the feeding habit of non-marine gammarideans. It was demonstrated that these animals, formerly presumed to feed mainly on dead plant material and therefore assigned to the functional feeding group of shredders [43, 61, 62], are, in fact, able to use a much wider variety of food [63–72].

For the very successful invasive species Dikerogammarus villosus, the following feeding-related activities were identified: detritus feeding, coprophagy, grazing, particle feeding, predation on free-swimming animals, benthic animals, and fish eggs and feeding on byssus threads of zebra mussels (Dreissena polymorpha Pallas, 1771) [73]. However, morphological investigations demonstrated that also the mouthparts of several non-marine gammarideans possess morphological adaptations, which enable the animal to use a certain food resource in an especially effective manner [46, 74, 75]. Until now, detailed descriptions of mouthparts and other structures involved in food acquisition of non-marine gammarideans are scarce. In taxonomic descriptions, mouthparts have often been neglected, possibly because preparation is necessary. The structures are also often very small, and differences can only be found in details. This is likewise true for the descriptions of the three species investigated herein. The original taxonomic description of Gammarus pulex by Linnaeus [36] is so short that Sars [76] questioned whether Linnaeus had actually described specimens of G. pulex. Pinkster [49] redescribed G. pulex, but did not describe the mouthparts except for the mandibular palp. In their redescription of G. pulex, Karaman and Pinkster [51] described all mouthparts, but also this description lacks enough details to detect functional relevant differences between the mouthparts of the various species. The latter is also true for the work of Agrawal [77], who described and illustrated the feeding appendages and the digestive system of G. pulex. Lastly, the original descriptions as well as the redescriptions of Gammarus fossarum [35, 50, 51] and of Echinogammarus berilloni [14, 37] give comparably little information on details of the morphology of the mouthparts.

The mouthparts of specimens of the three species investigated herein are very similar, but nevertheless various fine-graded differences could be found between these species.

Gammarus pulex is the most widespread freshwater amphipod in mainland Europe as well as the most widespread and abundant freshwater amphipod in Britain [78, 79] and is regarded as one of the most important invertebrate species in chalk streams in terms of biomass and food for fish [80]. It predominantly occurs in middle and lower reaches of streams and rivers, lowland lakes, ponds, and brooks [51]. In some publications, the limit of distribution is stated to be at about 450 m altitude [41, 81, 82], but when competing species are absent, it can be found in all sections of the waters [51]. Dusaugey [83] and Goedmakers [84] have found the species at 1340 and 1200 m, respectively. In Ireland, G. pulex is an invasive species where it replaces the native G. duebeni Liljeborg, 1852 in rocky parts of lakes, rivers, and along canals [78] and has a great impact on native macroinvertebrate community composition [85]. Microdistribution of G. pulex seems to be size assortative, with large animals being associated with large substrate particles like pieces of wood or accumulated fallen leaves and macrophytes [10, 77, 86, 87]. In running waters, G. pulex prefers sections with lower velocity [88, 89]. According to Piscart et al. [24], its preferred substratum is vegetation and leaf litter.

Agrawal [77] investigated gut contents and concluded that G. pulex mainly feeds on algal filaments and other vegetable matter. Also laboratory experiments indicate that plant material is an important food source, because specimens of G. pulex also shredded leaf material in the presence of animal prey [67]. Graca et al. [90, 91] reported that G. pulex feeds preferentially on conditioned rather than on unconditioned leaf material, although no significant effect of conditioning on growth was observed. Also Welton and Clarke [92] observed feeding on both decaying leaves and fresh green leaves. Investigations on the enzymes of the midgut glands yielded that G. pulex produces both cellulose and phenol oxidase by itself and is therefore adapted to digest plant material [93]. However, laboratory experiments show that G. pulex is also an effective predator on Asellus aquaticus Linnaeus, 1758 [94], Copepoda [95], mayfly nymphs [67], larvae of Chironomidae, Simuliidae, Ephemeroptera [68], Enchytraeidae [96], and on Tubifex sp. [68]. Moreover, experiments on intraguild predation demonstrated that G. pulex also preys on other gammarideans such as G. tigrinus Sexton 1939, G. duebeni Liljeborg, 1852, and Crangonyx pseudogracilis Bousfield, 1958 [27, 97]. Also analyses of stable C and N isotopes highlighted that G. pulex is able to feed on a broad spectrum of food sources [24].

The results of our investigation on the morphology of the mouthparts and other structures involved in food acquisition correspond with findings of the investigations mentioned above.

The antennae of Gammarus pulex with their rows of long and posteriorly directed setae on each medio-laterally broadened annulus of the flagellum forming a flag-like brush (Figures 2(d) and 2(g)) are well suited to collect fine particular detritus and to sieve particles out of the respiratory water current. In addition, these setae can help to create a water current for capturing free-swimming organisms when the antennae are bent towards the ventral side of the cephalothorax in a sudden movement. Such a mode of catching free-swimming organisms has been described by Platvoet et al. [73] for the pontogammarid D. villosus. The antennal flagellae of this species have similar setation [74]. The endopods of the foliaceous third uropods of G. pulex are relatively long (Figure 3(a)). Both endopod and exopod bear plumose setae on their median and lateral margins building a broad fan (Figure 3(b)). Therefore, the third uropods are also well suited to sieve particles out of the respiratory water current and it seems possible that they are used for guiding faeces anterior toward the gnathopods (coprophagy). The closely arranged long setae of the second gnathopods with their curled distal ends (Figures 4(b) and 4(c)) together are again a structure which is suited for sieving particles out of the respiratory water current. They can also be used for cleaning the antennae and for sweeping periphyton from the substratum. Furthermore, the two opposing gnathopods with their ventromedially directed setae build a space in which food particles and organisms can be held captive and guided to the mouthparts. The maxillipeds (Figures 5(a)–5(d)) with their medially directed setae and the two claw-like setae on the distal end of the endites seem to be useful for combing out particles from the setae of the gnathopods and antennae and for transferring them to the mandibles.

The basipodal endites of the maxillae (Figures 8(a)–8(d)) with their medially directed plumose setae build a dense net for preventing food from being washed away from the mouth region and for concentrating food. The coxal endites of the maxillulae with their medially directed pappose setae (Figure 11(c)) may have the same function. The comb-like cuspidate setae on the distal margin of the basipodal endites of the maxillulae (Figures 11(e) and 11(f)) seem to be well suited for combing out particles from the setae of the antennae and gnathopods. The use of these setae for detaching periphyton from the substrate might be possible, but there are no specializations for this purpose as it could be shown for G. roeselii [46], and on those specimens we investigated, we did not find distinct signs of abrasion. Left and right incisors and the left lacinia of the mandibles (Figures 14(a)–14(d)) of G. pulex are broad and well developed and therefore seem to be well suited for cutting off pieces of bigger food items. The rasp-like surface of the molars (Figures 14(e) and 14(f)) seems to be well suited for grinding hard plant material, although these parallel edges are not as well developed as in G. roeselii [46].

Gammarus fossarum is widely distributed in central Europe, the Balkan Peninsula, and Asia minor [45, 51]. It inhabits springs, brooks, and upper reaches of smaller rivers with low content of nutrients and low conductivity [44, 81, 98, 99]. It tolerates and prefers low temperature and high currents [45, 82, 100–104]. In gut contents of G. fossarum, Helesic et al. [105] found filamentous algae and cyanobacteria, parts of leaves, moss, plankton organisms, and macroinvertebrates living in periphyton. If no other food is available, G. fossarum also feeds on fresh leaves [43]. However, in laboratory experiments, growth was best with decaying leaves of lime and elm, whereas growth and survival rate was significantly lower with fresh macrophytes and algae [106]. Pieper [107] observed that adult specimens mainly feed on dead leaves. In their natural habitats, specimens of G. fossarum were most abundant in accumulations of leave litter and other dead plant material [43, 108, 109]. Gut content analyses performed by Felten et al. [72] showed that the investigated individuals of G. fossarum fed on detritus, diatoms, filamentous algae, leaf litter, woody debris, and animal matter.

The setation of the slender antennal flagellum (Figures 2(e) and 2(h)) of G. fossarum is sparse and therefore not as effective for sieving particles out of the respiratory water current and for catching free-swimming organisms as in G. pulex. The endopods of the third uropods (Figure 3(c)) are not as long as those in G. pulex, and there are plumose setae only on the median margin of the exopods (Figure 3(d)). Therefore, the third uropods of G. fossarum seem to be not as well suited for sieving particles out of the respiratory water current as those of G. pulex. Coprophagy in the same manner as in G. pulex seems also to be possible in G. fossarum. The long and closely arranged distally curved setae of the second gnathopods (Figures 4(e) and 4(f)) closely resemble those in G. pulex. Therefore, the second gnathopods of G. fossarum are also suited for cleaning the antennae and for sweeping periphyton from the substratum. Maxillipeds (Figures 6(a)–6(d)) and maxillae (Figures 9(a)–9(f)) of G. fossarum are very similar to those in G. pulex, so we expect no functional differences. In contrast, clear differences can be observed in the setation of the maxillulae (Figures 12(a)–12(f)). The lateral two or three setae of the row of setae on the distal margin of the basipodal endopods are distally flattened like chisels overhanging the other comb-like setae posteriorly (Figure 12(e)). With these setae, the maxillulae seem to be well suited for scraping off periphyton from the substratum. Signs of abrasion on these setae support this conclusion (Figure 12(f)). In contrast, Felten et al. [72] calculated from their results of gut content analyses that the investigated G. fossarum population could be considered as 48% collector, 43% shredder, 8.3% predator, and only 1.3% scraper. The reason for the marginal importance of scraping in the investigated population might be the abundant supply of leave litter and bryophytes in this particular stream. In waters with less availability of these food resources, as is often the case in headwaters, scraping might play a more important role in the nutrition of G. fossarum. Furthermore, a point to be taken into account is that G. fossarum can live in the hyporheic interstitial where biofilm represents a very important portion of food available. This might be important especially in winter when water level and temperature is low. The mandibles (Figures 15(a)–15(f)) of G. fossarum are similar to those of G. pulex and seem also to be well suited for cutting off pieces of bigger food items and to grind hard plant material.

Catta [37] described Echinogammarus berilloni from a spring of a brook on the Mandarin mount, Atlantic Pyrenean mountains. This species originates from the Atlantic region of France and the north-western part of Spain [14, 16] and extended its area of distribution to the middle and lower reaches of larger streams, channels, and rivers of the north of France [10], the Channel Islands [110], Luxembourg, Belgium, the southern part of the Netherlands [13], and local populations exist in Germany [5, 14]. Kley and Maier [30] found specimens associated with near-shore submersed macrophytes in a tributary of the river Rhine. According to Piscart et al. [10, 24], E. berilloni shows strong preference for vegetation and leaf litter as substratum when existing in single-species populations, but there is a shift to a more diverse use of substrates including pebbles when it coexists with G. pulex. E. berilloni is salt tolerant and eurythermous and can withstand a high amount of organic pollution [2, 39]. Since the invasion of Dikerogammarus villosus, there has been a dramatic reduction of the relative abundance of E. berilloni [6].

In Echinogammarus berilloni, the antennae with their sparse and short setation (Figures 2(f) and 2(i)) are not suited for sieving particles out of the respiratory water current and for catching free-swimming organisms. However, with their anteroventrally flattened and mediolaterally broadened flagellum, the antennae might be dedicated to collect food particles and move them into the reaching area of the gnathopods. Also the morphology of the third uropods indicates that sieving does not play a great role in the nutrition of E. berilloni, because their endopods are very short (Figure 3(e)), and there are only simple setae on the median and lateral margins of the exopods (Figure 3(f)). Also the setae on the second gnathopods (Figures 4(h) and 4(i)) are sparser and shorter, and therefore they seem to be less suitable for sieving and for sweeping periphyton from the substratum. Such constraints in the ability to use these food resources correlates with findings of Piscart et al.: “… their isotopic signatures highlighted a broader spectrum of food sources and a broader diversity of carbon sources assimilated by G. pulex than by E. berilloni” [24].

Maxillipeds (Figures 7(a)–7(d)) and maxillae (Figures 10(a)–10(d)) of E. berilloni are very similar to those of G. pulex and G. fossarum so we expect no functional differences. Again, there are differences in the morphology of the setae on the distal margin of the basipodal endites of the maxillulae. In E. berilloni, the lateral four of these setae are stout and do not bear lateral secondary spines, but end in a broadened distal margin with two or three humps (Figures 13(e) and 13(f)). Also here we found signs of abrasion, so it is likely that these setae are used to scrape off periphyton from the substratum. This adaptation of setae on the basipodal endite of the maxillulae with no lateral secondary spines and a broadened distal margin is comparable with the situation in G. roeselii [46]. However, in the latter, the distal margin of these setae is sharper, and therefore the adaptation to scraping seems to be even more effective as in E. berilloni. The mandibles (Figure 16(a)–16(f)) of E. berilloni are similar to those of G. pulex and G. fossarum. Therefore, they likewise seem to be well suited for cutting off pieces of bigger food items and to grind hard plant material.

5. Conclusions

The morphology of the mouthparts and structures involved in food acquisition indicate that Gammarus pulex is able to feed on a wide variety of food sources including sieving suspended organic particles out of the respiratory water current, coprophagy, collecting detritus, catching free-swimming organisms, removing periphyton from the substratum, biting off pieces from bigger food items, and grinding hard plant material. Therefore, this species can be characterized as omnivorous. Compared to G. pulex, in G. fossarum the structures investigated here indicate that these two species have very similar feeding habits. However, the setation of the maxillulae of G. fossarum and the severe abrasion of these structures indicate that feeding on periphyton removed from hard substratum plays a greater role in the nutrition of the latter. This coincides with the finding that G. fossarum typically inhabits the upper reaches of brooks and rivers, where periphyton on hard substratum is the most relevant food resource. The results of our work suggest that the ability to sieve particles out of the respiratory water current and to catch free-swimming organisms is limited in Echinogammarus berilloni. This species seems to be adapted to collect food items with the antennae and to remove periphyton from the substratum with the maxillulae. Therefore, the ability to use different food sources seems to be restricted in E. berilloni compared to G. pulex.

Arndt et al. [60] hypothesised that “mouthpart morphology differs little between related amphipod species, but greater changes are encountered in the morphology of accessory feeding appendages as a consequence of trophic specialization.” This is generally also true for the species investigated here, but we also found differences in the morphology of the maxillulae. These findings correspond with the situation in Gammarus roeselii and Dikerogammarus villosus where we, in an earlier study, also found differences in the morphology of the antennae, gnathopods, maxillipeds, maxillulae, and mandibles [46, 74].

Abreviations

1, 2, 3, 4, 5: | Number of podomeres of antennulae and antennae
ac: | Articular condylus
af: | Accessory flagellum of antennula
ant: | Antenna
bas: | Basipod
cal: | Calceolus
cox: | Coxa
eb: | Endite of basipod
ei: | Endite of ischium
f: | Flagellum of antennula and antenna
gc: | Gland conus
gnp1: | First gnathopod
ip: | Incisor process
ipl: | Inner plate
lbr: | Labrum
lm: | Lacinia mobilis
md: | Mandible
md plp: | Mandibular palp
mp: | Molar process
mxl: | Maxillula
mxl plp: | Maxillular palp
mxp: | Maxilliped
opl: | Outer plate
sr: | Setal row
ste: | Sternite.

Acknowledgments

The authors are grateful to Gerhard Maier, Axel Kley, and Werner Kinzler for providing us with specimens of E. berilloni. Many thanks are to the team of the Central Facility for Electron Microscopy, University of Ulm for their friendly support. Carolin and Joachim T. Haug and Verena Kutschera are thanked for inspiring ideas and discussions. They also thank an anonymous reviewer for valuable critical comments and suggestions on an earlier version of the paper. The study material is stored at the University of Ulm. This work was part of the project Wa-754/16-1, German Research Foundation (DFG).

References

A. Bij de Vaate and A. G. Klink, “Dikerogammarus villosus Sowinsky (Crustacea: Gammaridae) a new immigrant in the Dutch part of the Lower Rhine,” Lauterbornia, vol. 20, pp. 51–54, 1995.

T. Tittizer, “Vorkommen und Ausbreitung aquatischer Neozoen (Makrozoobenthos) in den Bundeswasserstraßen,” in Neophyten, Neozoen—Gefahr für Die Heimische Natur? S. Schmidt-Fischer, Ed., vol. 22 of Beiträge der Akademie für Natur- und Umweltschutz Baden-Württemberg, 1996.

T. Tittizer, F. Schöll, M. Banning, A. Haybach, and M. Schleuter, “Aquatische neozoen im makrozoobenthos der binnenwasserstraßen deutschlands,” Lauterbornia, vol. 39, pp. 1–72, 2000.

A. Bij de Vaate, K. Jazdzewski, H. A. M. Ketelaars, S. Gollasch, and G. Van der Velde, “Geographical patterns in range extension of Ponto-Caspian macroinvertebrate species in Europe,” Canadian Journal of Fisheries and Aquatic Sciences, vol. 59, no. 7, pp. 1159–1174, 2002.

K. Wouters, “On the distribution of alien non-marine and estuarine macro-crustaceans in Belgium,” Bulletin de l'Institut Royal des Sciences Naturelles de Belgique, Biologie, vol. 72, pp. 119–129, 2002.

L. Bollache, S. Devin, R. Wattier et al., “Rapid range extension of the Ponto-Caspian amphipod Dikerogammarus villosus in France: potential consequences,” Archiv fur Hydrobiologie, vol. 160, no. 1, pp. 57–66, 2004.

K. Jazdzewski, A. Konopacka, and M. Grabowski, “Recent drastic changes in the gammarid fauna (Crustacea, Amphipoda) of the Vistula River deltaic system in Poland caused by alien invaders,” Diversity and Distributions, vol. 10, no. 2, pp. 81–87, 2004.

H. A. M. Ketelaars, “Range extension of Ponto-Caspian aquatic invertebrates in continental Europe,” in Aquatic Invasions in the Black, Caspian and Mediterranean Seas, H. J. Dumont, Ed., pp. 209–236, Kluwer, Dordrecht, The Netherlands,, 2004.

G. Josens, A. B. De Vaate, P. Usseglio-Polatera et al., “Native and exotic Amphipoda and other Peracarida in the River Meuse: new assemblages emerge from a fast changing fauna,” Hydrobiologia, vol. 542, no. 1, pp. 203–220, 2005.

C. Piscart, A. Manach, G. H. Copp, and P. Marmonier, “Distribution and microhabitats of native and non-native gammarids (Amphipoda, Crustacea) in Brittany, with particular reference to the endangered endemic sub-species Gammarus duebeni celticus,” Journal of Biogeography, vol. 34, no. 3, pp. 524–533, 2007.

M. Messiaen, K. Lock, W. Gabriels et al., “Alien macrocrustaceans in freshwater ecosystems in the eastern part of Flanders (Belgium),” Belgian Journal of Zoology, vol. 140, no. 1, pp. 30–39, 2010.

M. Grabowski, K. Jazdzewski, and A. Konopacka, “Alien crustacea in Polish waters—amphipoda,” Aquatic Invasions, vol. 2, no. 1, pp. 25–38, 2007.

S. Pinkster, “The Echinogammarus berilloni-group, a number of predominantly iberian amphipod species (Crustacea),” Bijdragen tot de Dierkunde, vol. 43, pp. 1–38, 1973.

S. Pinkster, “A revision of the genus Echinogammarus Stebbing, 1899 with some notes on related genera (Crustacea, Amphipoda),” Memoire del Museo Civico di Storia Naturale 2, vol. 10, pp. 9–185, 1993.

R. Kinzelbach, “Neozoans in European waters - Exemplifying the worldwide process of invasion and species mixing,” Experientia, vol. 51, no. 5, pp. 526–538, 1995.

G. Van der Velde, S. Rajagopal, B. Kelleher, I .B. Musko, and A. Bij de Vaate, “Ecological impact of crustacean invaders: general considerations and examples from the Rhine River,” in The Biodiversity Crisis and Crustacea. Proceedings of the 4th International Crustacean Congress, Amsterdam, 1998, J. C. Von Vaupel Klein and F. R. Schram, Eds., pp. 3–33, Balkema, Rotterdam, The Netherlands, 2000.

V. K. Sowinsky, “Rakoobraznyia Azovskago Moria,” Zapiski Kievskago Obshchestva Estestvoispytatelei, vol. 13, pp. 289–405, 1894.

U. Mürle, A. Becker, and P. Rey, “Dikerogammarus villosus (Amphipoda) new in Lake Constance,” Lauterbornia, vol. 49, pp. 77–79, 2004.

B. Lods-Crozet and O. Reymond, “Bathymetric expansion of an invasive gammarid (Dikerogammarus villosus, Crustacea, Amphipoda) in Lake Léman,” Journal of Limnology, vol. 65, no. 2, pp. 141–144, 2006.

S. Casellato, G. La Piana, L. Latella, and S. Ruffo, “Dikerogammarus villosus (Sowinsky, 1894) (Crustacea, Amphipoda, Gammaridae) for the first time in Italy,” Italian Journal of Zoology, vol. 73, no. 1, pp. 97–104, 2006.

M. Gervais, “Note sur deux especes de Crevettes qui vivent aux environs de Paris,” Annales des Sciences Naturelles, vol. 2, no. 4, pp. 127–128, 1835.

G. O. Sars, “Beretning om en I Sommeren 1862 foretagen zoologisk Reise I Christianias og Trondhjems Stifter,” Nyt Magazin for Naturvidenskaberne, vol. 12, pp. 193–340, 1863.

E. L. Bousfield, “Freshwater amphipod crustaceans of glaciated North America,” Canadian Field Naturalist, vol. 72, pp. 55–113, 1958.

C. Piscart, J. M. Roussel, J. T. A. Dick, G. Grosbois, and P. Marmonier, “Effects of coexistence on habitat use and trophic ecology of interacting native and invasive amphipods,” Freshwater Biology, vol. 56, no. 2, pp. 325–334, 2011.

S. Kolding, “Habitat selection and life cycle characteristics of five species of the amphipod genus Gammarus in the Baltic,” Oikos, vol. 37, pp. 173–178, 1981.

A. Skadsheim, “Coexistence and reproductive adaptations of amphipods: the role of environmental heterogeneity,” Oikos, vol. 43, no. 1, pp. 94–103, 1984.

J. T. A. Dick, “Post-invasion amphipod communities of Lough Neagh, Northern Ireland: influences of habitat selection and mutual predation,” Journal of Animal Ecology, vol. 65, no. 6, pp. 756–767, 1996.

J. T. A. Dick and D. Platvoet, “Intraguild predation and species exclusions in amphipods: the interaction of behaviour, physiology and environment,” Freshwater Biology, vol. 36, no. 2, pp. 375–383, 1996.

C. MacNeil, J. T. A. Dick, R. W. Elwood, and W. I. Montgomery, “Coexistence among native and introduced freshwater amphipods (Crustacea); habitat utilization patterns in littoral habitats,” Archiv fur Hydrobiologie, vol. 151, no. 4, pp. 591–607, 2001.

A. Kley and G. Maier, “An example of niche partitioning between Dikerogammarus villosus and other invasive and native gammarids: a field study,” Journal of Limnology, vol. 64, no. 1, pp. 85–88, 2005.

C. MacNeil and D. Platvoet, “The predatory impact of the freshwater invader Dikerogammarus villosus on native Gammarus pulex (Crustacea: Amphipoda); influences of differential microdistribution and food resources,” Journal of Zoology, vol. 267, no. 1, pp. 31–38, 2005.

C. Fiser, R. Keber, V. Kerezi et al., “Coexistence of species of two amphipod genera: Niphargus timavi (Niphargidae) and Gammarus fossarum (Gammaridae),” Journal of Natural History, vol. 41, pp. 2641–2651, 2008.

J. Hesselschwerdt, J. Meeker, and K. M. Wantzen, “Gammarids in Lake Constance: habitat segregation between the invasive Dikerogammarus villosus and the indigenous Gammarus roeselii,” Fundamental and Applied Limnology, vol. 173, no. 3, pp. 177–186, 2008.

A. Kley, W. Kinzler, Y. Schank, G. Mayer, D. Waloszek, and G. Maier, “Influence of substrate preference and complexity on co-existence of two non-native gammarideans (Crustacea: Amphipoda),” Aquatic Ecology, vol. 43, no. 4, pp. 1047–1059, 2009.

C. L. Koch, Deutschlands Crustaceen, Myriapoden und Arachniden. Ein Beitrag zur Deutschen Fauna, vol. 5, Herrich-Schäfer, Regensburg, Germany, 1st edition, 1836.

C. Linnaeus, Systema Naturae, vol. 1, Salvius, Stockholm, Sweden, 10 edition, 1758.

J. D. Catta, “Note sur le Gammarus berilloni (n. sp.),” Bulletin del la Societé de Borda, vol. 1, pp. 68–73, 1878.

O. Schmit and G. Josens, “Preliminary study of the scars borne by Gammaridae (Amphipoda, Crustacea),” Belgian Journal of Zoology, vol. 134, no. 2, pp. 75–78, 2004.

A. Meyer, N. Kaschek, and E. I. Meyer, “The effect of low flow and stream drying on the distribution and relative abundance of the alien amphipod, Echinogammarus berilloni (Catta, 1878) in a karstic stream system (Westphalia, Germany),” Crustaceana, vol. 77, no. 8, pp. 909–922, 2004.

M. Chovet and J. Y. Lecureuil, “Distribution of epigean Gammaridae (Crustacea, Amphipoda) in the Loire River and in the streams of the Region Centre (France),” Annales de Limnologie, vol. 30, no. 1, pp. 11–23, 1994.

M. P. D. Meijering, “Lack of oxygen and low pH as limiting factors for Gammarus in Hessian brooks and rivers,” Hydrobiologia, vol. 223, pp. 159–169, 1991.

W. Teichmann, “Lebensabläufe und Zeitpläne von Gammariden unter ökologischen Bedingungen,” Archiv für Hydrobiologie, vol. 64, no. 2, supplement, pp. 240–306, 1982.

J.-W. Haeckel, M. P. D Meijering, and H. Rusetzki, “Gammarus fossarum Koch als Fallaubzersetzer in Waldbächen,” Freshwater Biology, vol. 3, pp. 241–249, 1973.

F. Foeckler, “Das Vorkommen von Gammariden im Donauraum zwischen Geisling und Straubing,” Archiv für Hydrobiologie, vol. 84, no. 2–4, supplement, pp. 169–180, 1992.

H. Nesemann, M. Pöckl, and K. J. Wittmann, “Distribution of epigean Malacostraca in the middle and upper Danube (Hungary, Austria, Germany),” Miscellanea Zoologica Hungarica, vol. 10, pp. 49–68, 1995.

G. Mayer, G. Maier, A. Maas, and D. Waloszek, “Mouthpart morphology of Gammarus roeselii compared to a successful invader, Dikerogammarus villosus (Amphipoda),” Journal of Crustacean Biology, vol. 29, no. 2, pp. 161–174, 2009.

T. O. Eggers and A. Martens, “Bestimmungsschlüssel der Süßwasser-Amphipoda (Crustacea) Deutschlands,” Lauterbornia, vol. 42, pp. 1–68, 2001.

T.O. Eggers and A. Martens, “Ergänzungen und Korrekturen zum Bestimmungsschlüssel der Süßwasser-Amphipoda (Crustacea) Deutschlands,” Lauterbornia, vol. 50, pp. 1–13, 2004.

S. Pinkster, “Redescription of Gammarus pulex (Linnaeus, 1758) based on neotype material (Amphipoda),” Crustaceana, vol. 18, pp. 177–186, 1969.

A. Goedmakers, “Gammarus fossarum Koch, 1835: redescription based on neotype material and notes to its local variation (Crustacea, Amphipoda),” Bijdragen tot de Dierkunde, vol. 42, no. 2, pp. 124–138, 1972.

G. S. Karaman and S. Pinkster, “Freshwater Gammarus species from Europe, North Africa, and adjacent regions of Asia (Crustacea: Amphipoda) Part I. Gammarus pulex-group and related species,” Bijdragen tot de Dierkunde, vol. 47, no. 1, pp. 1–97, 1977.

E. Dahl, “Deep-sea carrion feeding amphipods: evolutionary patterns in niche adaptation,” Oikos, vol. 33, pp. 167–175, 1979.

B. Sainte-Marie, “Morphological adaptations for carrion feeding in four species of littoral or circalittoral lysianassid amphipods,” Canadian Journal of Zoology, vol. 62, no. 9, pp. 1668–1674, 1984.

M. A. McGrouther, “Comparison of feeding mechanisms in two intertidal gammarideans, Hyale rupicola (Haswell) and Paracalliope australis (Haswell) (Crustacea: Amphipoda),” Australian Journal of Marine and Freshwater Research, vol. 34, no. 5, pp. 717–726, 1983.

P. G. Moore and P. S. Rainbow, “Feeding biology of the mesopelagic gammaridean amphipod Parandania boecki (Stebbing, 1888) (Crustacea: Amphipoda: Stegocephalidae) from the Atlantic Ocean,” Ophelia, vol. 30, no. 1, pp. 1–19, 1989.

C. O. Coleman, “On the nutrition of two Antarctic acanthonotozomatidae (Crustacea: Amphipoda) - Gut contents and functional morphology of mouthparts,” Polar Biology, vol. 9, no. 5, pp. 287–294, 1989.

C. O. Coleman, “Gnathiphimedia mandibularis K.H. Barnard 1930, an Antarctic amphipod (Acanthonotozomatidae, Crustacea) feeding on Bryozoa,” Antarctic Science, vol. 1, pp. 343–344, 1989.

C. O. Coleman, “Bathypanoploea schellenbergi Holman & Watling, 1983, an Antarctic amphipod (Cruatacea) feeding on Holothuroidea,” Ophelia, vol. 31, no. 3, pp. 197–205, 1990.

D. H. Steele and V. J. Steele, “Biting mechanism of the amphipod Anonyx (Crustacea: Amphipoda: Lysianassoidea),” Journal of Natural History, vol. 27, pp. 851–860, 1993.

C. E. Arndt, J. Berge, and A. Brandt, “Mouthpart-atlas of Arctic sympagic amphipods - Trophic niche separation based on mouthpart morphology and feeding ecology,” Journal of Crustacean Biology, vol. 25, no. 3, pp. 401–412, 2005.

M. Kostalos and R. L. Seymour, “Role of microbial enriched detritus in the nutrition of Gammarus minus (Amphipoda),” Oikos, vol. 27, pp. 512–516, 1976.

K.W. Cummins and M.J. Klug, “Feeding ecology of stream invertebrates,” Annual Review of Ecology and Systematics, vol. 10, pp. 147–172, 1979.

J. T. A. Dick, I. Montgomery, and R. W. Elwood, “Replacement of the indigenous amphipod Gammarus duebeni celticus by the introduced G. pulex: differential cannibalism and mutual predation,” Journal of Animal Ecology, vol. 62, no. 1, pp. 79–88, 1993.

X. Gayte and D. Fontvieille, “Autochthonous vs. allochthonous organic matter ingested by a macroinvertebrate in headwater streams: Gammarus sp. as a biological probe,” Archiv fur Hydrobiologie, vol. 140, no. 1, pp. 23–36, 1997.

C. MacNeil, J. T. A. Dick, and R. W. Elwood, “The trophic ecology of freshwater Gammarus spp. (Crustacea: Amphipoda): Problems and perspectives concerning the functional feeding group concept,” Biological Reviews of the Cambridge Philosophical Society, vol. 72, no. 3, pp. 349–364, 1997.

J. T. A. Dick and D. Platvoet, “Invading predatory crustacean Dikerogammarus villosus eliminates both native and exotic species,” Proceedings of the Royal Society B, vol. 267, no. 1447, pp. 977–983, 2000.

D. W. Kelly, J. T. A. Dick, and W. I. Montgomery, “The functional role of Gammarus (Crustacea, Amphipoda): shredders, predators, or both?” Hydrobiologia, vol. 485, pp. 199–203, 2002.

H. Krisp and G. Maier, “Consumption of macroinvertebrates by invasive and native gammarids: a comparison,” Journal of Limnology, vol. 64, no. 1, pp. 55–59, 2005.

D. Platvoet, J. T. A. Dick, N. Konijnendijk, and G. Van Der Velde, “Feeding on micro-algae in the invasive Ponto-Caspian amphipod Dikerogammarus villosus (Sowinsky, 1894),” Aquatic Ecology, vol. 40, no. 2, pp. 237–245, 2006.

C. Maazouzi, G. Masson, M. S. Izquierdo, and J. C. Pihan, “Fatty acid composition of the amphipod Dikerogammarus villosus: feeding strategies and trophic links,” Comparative Biochemistry and Physiology A, vol. 147, no. 4, pp. 868–875, 2007.

W. Kinzler, A. Kley, G. Mayer, D. Waloszek, and G. Maier, “Mutual predation between and cannibalism within several freshwater gammarids: Dikerogammarus villosus versus one native and three invasives,” Aquatic Ecology, vol. 43, no. 2, pp. 457–464, 2009.

V. Felten, G. Tixier, F. Guérold, V. De Crespin De Billy, and O. Dangles, “Quantification of diet variability in a stream amphipod: implications for ecosystem functioning,” Fundamental and Applied Limnology, vol. 170, no. 4, pp. 303–313, 2008.

D. Platvoet, G. Van der Velde, J. T. A. Dick, and S. Li, “Flexible omnivory in Dikerogammarus villosus (Sowinsky, 1894) (Amphipoda)—Amphipod Pilot Species Project (AMPIS) report 5,” Crustaceana, vol. 82, no. 6, pp. 703–720, 2009.

G. Mayer, G. Maier, A. Maas, and D. Waloszek, “Mouthparts of the Ponto-Caspian invader Dikerogammarus villosus (Amphipoda: Pontogammaridae),” Journal of Crustacean Biology, vol. 28, no. 1, pp. 1–15, 2008.

I. V. Mekhanikova, “Morphology of mandible and lateralia in six endemic amphipods (Amphipoda, Gammaridea) from Lake Baikal, in relation to feeding,” Crustaceana, vol. 83, no. 7, pp. 865–887, 2010.

S. O. Sars, An Account of the Crustacea of Norway, I Amphipoda, Part I Description, Cammermeyer's Forlag, Christiania, Norway, 1895.

V. P. Agrawal, “Feeding appendages and the digestive system of Gammarus pulex,” Acta Zoologica, vol. 46, no. 1-2, pp. 67–81, 1965.

M. J. Costello, “Biogeography of alien amphipods occurring in Ireland, and interactions with native species,” Crustaceana, vol. 65, no. 3, pp. 287–299, 1993.

S. Pinkster, “On members of the Gammarus pulex-group (Crustacea - Amphipoda) from Western Europe,” Bijdragen tot de Dierkunde, vol. 42, no. 2, pp. 164–191, 1972.

J. S. Welton, “Life-history and reproduction of the amphipod Gammarus pulex in a Dorset chalk stream,” Freshwater Biology, vol. 9, pp. 263–275, 1979.

A. Schellenberg, “Der Gammarus des deutschen Süßwassers,” Zoologischer Anzeiger, vol. 108, no. 9-10, pp. 209–217, 1934.

W. Janetzky, “Distribution of the genus Gammarus (Amphipoda: Gammaridae) in the River Hunte and its tributaries (Lower Saxony, northern Germany),” Hydrobiologia, vol. 294, no. 1, pp. 23–34, 1994.

J. Dusaugey, “Les gammares du Dauphine et leur repartition,” Travaux du Laboratoire d'Hydrobiologie et de Pisciculture de Grenoble, pp. 9–18, 1955.

A. Goedmakers, “Les Gammaridea (Crustaces, Amphipodes) du Massif Central,” Bulletin Zoologisch Museum Universiteit van Amsterdam, vol. 3, no. 23, pp. 211–219, 1974.

D. W. Kelly, J. T. A. Dick, W. I. Montgomery, and C. MacNeil, “Differences in composition of macroinvertebrate communities with invasive and native Gammarus spp. (Crustacea: Amphipoda),” Freshwater Biology, vol. 48, no. 2, pp. 306–315, 2003.

J. Adams, J. Gee, P. Greenwood, S. McKelvey, and R. Perry, “Factors affecting the microdistribution of Gammarus pulex ( Amphipoda): an experimental study,” Freshwater Biology, vol. 17, no. 2, pp. 307–316, 1987.

M. A. S. Graca, L. Maltby, and P. Calow, “Comparative ecology of Gammarus pulex (L.) and Asellus aquaticus (L.) I: population dynamics and microdistribution,” Hydrobiologia, vol. 281, no. 3, pp. 155–162, 1994.

J. Dahl and L. Greenberg, “Effects of habitat structure on habitat use by Gammarus pulex in artificial streams,” Freshwater Biology, vol. 36, no. 3, pp. 487–495, 1996.

V. Felten, S. Dolédec, and B. Statzner, “Coexistence of an invasive and a native gammarid across an experimental flow gradient: flow-refuge use, -mortality, and leaf-litter decay,” Fundamental and Applied Limnology, vol. 172, no. 1, pp. 37–48, 2008.

M. A. S. Graça, L. Maltby, and P. Calow, “Importance of fungi in the diet of Gammarus pulex and Asellus aquaticus I: feeding strategies,” Oecologia, vol. 93, no. 1, pp. 139–144, 1993.

M. A. S. Graca, L. Maltby, and P. Calow, “Importance of fungi in the diet of Gammarus pulex and Asellus aquaticus. II.Effects on growth, reproduction and physiology,” Oecologia, vol. 96, no. 3, pp. 304–309, 1993.

J. S. Welton and R. T. Clarke, “Laboratory studies on the reproduction and growth of the amphipod Gammarus pulex (L.),” Animal Ecology, vol. 49, pp. 581–592, 1980.

M. Zimmer and S. Bartholmé, “Bacterial endosymbionts in Asellus aquaticus (Isopoda) and Gammarus pulex (Amphipoda) and their contribution to digestion,” Limnology and Oceanography, vol. 48, no. 6, pp. 2208–2213, 2003.

L. Bollache, J. T. A. Dick, K. D. Farnsworth, and W. I. Montgomery, “Comparison of the functional responses of invasive and native amphipods,” Biology Letters, vol. 4, no. 2, pp. 166–169, 2008.

R. Margalef, “Sobre el regimen alimentico de los animales en agua dulce. 2a communicacion,” Revista Espaniola de Fisiologia, vol. 4, pp. 207–213, 1948.

W. Wolterstorff, “Der Bachflohkrebs, Gammarus pulex L. im Aquarium,” Blätter für Aquarien und Terrarienkunde, vol. 28, pp. 85–87, 1917.

J. T. A. Dick, W. I. Montgomery, and R. W. Elwood, “Intraguild predation may explain an amphipod replacement: evidence from laboratory populations,” Journal of Zoology, vol. 249, no. 4, pp. 463–468, 1999.

R. Kinzelbach and W. Claus, “Die Verbreitung von Gammarus fossarum Koch, 1835, G. pulex (Linnaeus, 1758) und G. roeseli Gervais, 1835, in den linken Nebenflüssen des Rheins zwischen Wieslauter und Nahe,” Crustaceana, vol. 4, supplement, pp. 164–172, 1977.

M. Grabowski, K. Bacela, A. Konopacka, and K. Jazdzewski, “Salinity-related distribution of alien amphipods in rivers provides refugia for native species,” Biological Invasions, vol. 11, no. 9, pp. 2107–2117, 2009.

E. Schwedhelm, “Thermopräferenz von Gammarus fossarum Koch, 1835 und Gammarus roeselii Gervais, 1835 (Crustacea, Amphipoda) in Abhängigkeit von der Jahreszeit,” Zoologischer Anzeiger, vol. 208, no. 5-6, pp. 367–374, 1982.

M. Pockl and U. H. Humpesch, “Intra- and inter-specific variations in egg survival and brood development time for Austrian populations of Gammarus fossarum and G. roeseli (Crustacea: Amphipoda),” Freshwater Biology, vol. 23, no. 3, pp. 441–455, 1990.

M. Pockl, “Reproductive potential and lifetime potential fecundity of the freshwater amphipods Gammarus fossarum and G. roeseli in Austrian streams and rivers,” Freshwater Biology, vol. 30, no. 1, pp. 73–91, 1993.

S. Wijnhoven, M. C. Van Riel, and G. Van der Velde, “Exotic and indigenous freshwater gammarid species: physiological tolerance to water temperature in relation to ionic content of the water,” Aquatic Ecology, vol. 37, no. 2, pp. 151–158, 2003.

J. Issartel, D. Renault, Y. Voituron, A. Bouchereau, P. Vernon, and F. Hervant, “Metabolic responses to cold in subterranean crustaceans,” Journal of Experimental Biology, vol. 208, no. 15, pp. 2923–2929, 2005.

J. Helesic, F. Kubicek, and S. Zahradkova, “The impact of regulated flow and altered temperature regime on river bed macroinvertebrates,” in Advances in River Bottom Ecology, G. Bretschko and J. Helesic, Eds., pp. 225–243, Backhuys, Leiden, The Netherlands, 1998.

M. Pockl, “Laboratory studies on growth, feeding, moulting and mortality in the freshwater amphipods Gammarus fossarum and G. roeseli,” Archiv fur Hydrobiologie, vol. 134, no. 2, pp. 223–253, 1995.

H.-G. Pieper, “Ökophysiologische und produktionsbiologische Untersuchungen an Jugendstadien von Gammarus fossarum Koch 1835,” Archiv für Hydrobiologie, vol. 54, no. 3, supplelment, pp. 257–327, 1978.

O. Dangles, “Aggregation of shredder invertebrates associated with benthic detrital pools in seven headwater forest streams,” Verhandlungen der Internationalen Vereinigung für Limnologie, vol. 28, pp. 1–4, 2002.

S. D. Tiegs, F. D. Peter, C. T. Robinson, U. Uehlinger, and M. O. Gessner, “Leaf decomposition and invertebrate colonization responses to manipulated litter quantity in streams,” Journal of the North American Benthological Society, vol. 27, no. 2, pp. 321–331, 2008.

T. R. R. Stebbing, “Amphipoda I. Gammaridea,” in Das Tierreich. Eine Zusammenstellung und Kennzeichnung der Rezenten Tierformen, F. E. Schulze, Ed., vol. 21, Friedländer, Berlin, Germany, 1906.