Journal of Chemistry
Volume 2019 (2019), Article ID 4561013, 9 pages
https://doi.org/10.1155/2019/4561013

Research Article

Synthesis and Characterization of β-Diketimine Schiff Base Complexes with Ni(II) and Zn(II) Ions: Experimental and Theoretical Study

Ibrahim A. M. Saraireh,¹ Mohammednoor Altarawneh,2,3 Jibril Alhawarin,¹ Mahmoud Salman,¹ Abdel Aziz Abu-Yamin,¹ and Randa Alasad¹

¹Department of Chemistry, Al-Hussein Bin Talal University, Ma’an, Jordan
²Department of Chemical Engineering, Al-Hussein Bin Talal University, Ma’an, Jordan
³School of Engineering and Information Technology, Murdoch University, Murdoch, WA 6150, Australia

Correspondence should be addressed to Ibrahim A. M. Saraireh; dribrahim9997@gmail.com

Received 22 October 2018; Revised 30 January 2019; Accepted 28 February 2019; Published 28 April 2019

Academic Editor: Narcis Avarvari

Copyright © 2019 Ibrahim A. M. Saraireh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract.

Schiff base diethyl 4,4-(pentane-2,4-diylidenebis(azanylylidene))benzoate (1) as a new ligand (L) was prepared by the reaction of acetylacetone with benzocaine in the ratio of 1 : 1. Two transition-metal complexes, [Ni(II)(LCl(HOEt))] (2) and [Zn(II)(LCl(HOEt))] (3), have been synthesized from metal salts with didentate Schiff base ligand (L) and characterized by elemental analyses, FT-IR, ¹H NMR, ¹³C NMR UV-Vis spectroscopy, and magnetic susceptibility. The biological activity of the complexes was studied. In addition, the M06-2x density function theory method and the 6-31G(d) basic set were applied to determine the optimized structures of 1–3 and to determine their IR and ¹H NMR, ¹³C NMR spectra theoretically. The data are in good agreement with the experimental results. The geometries of complexes 2 and 3 were determined to be square-planar for 2 and tetrahedral for 3.

1. Introduction

The β-diketiminate ligands generally known as “nacnac”, or [{ArNC(R)}2CH]- (where Ar = aryl and R = Me or another organic group), have emerged as popular ligands among other ancillary supports, on account of their strong binding to metals; their tunable, steric, and electronic effects; and their diversity in bonding modes [1–3]. The as “nacnac” ligand skeleton is analogous to the “acac” (acetylacetonate) ligand, but the oxygen atoms are replaced with nitrogen-based moieties such as NR (R = alkyl, silyl, Ar) (Scheme 1). As a result, steric protection at the metal center is provided by the substituent at the nitrogen donor atom.

Scheme 1: Schematic diagram of “nacnac”.

The first documented cases of β-diketiminate metal complexes were reported by McGeachin 1968 [4]. Till date, the N-aryl substituted “nacnac” ligands [HN(Ar)C(Me)CHC(Me)N(Ar)] [5] and [HN(Ar)C(tBu)CHC(tBu)N(Ar)] [6] showed to be the best for stabilization of low coordinate metal sites.

These compounds are used as ligands, for example, in synthesis of heterocycles [7]. Diimines can most likely be prepared by the condensation of a dialdehyde or diketone with the respective whereby water is eliminated [8]. Diimines, as 1,2-diimine (α-diimine) [9] or 1,3-diimine (β-diimine) [10, 11], are applicable as ligands in the synthesis of a high variety of coordination complexes featuring diverse transition metals [1]. In this respect, for example, (α-diimine) ruthenium complexes can be applied in diverse areas such as solar energy conversion, sensor technology, homogeneous catalysis, biomedical research, supramolecular chemistry, and molecular electronics [12]. The β-diketiminate zinc complexes were used as catalysts for intramolecular hydroamination [13]. In addition, β-diketiminate anions were applied in lanthanide organometallic and metal-organic chemistry as they are easily accessible and show tunable steric and electronic effects [5, 14]. Tris-β-diketiminate ytterbium complexes with various β-ketiminato ligands were examined for their catalytic activity in the ring-opening polymerization of caprolactone and lactide [15] and in the addition of amines to carbodiimides, revealing that the catalytic activity of these coordination complexes is greatly affected by the steric bulk of the β-diketiminato ligands of which the bulkiest was found to be the most active one [16, 17].

Transition-metal complexes supported by β-diketiminato or β-ketiminato ligands have received increasing attention [18]. The versatile electronic properties and steric demands of β-diketiminates or β-ketiminates can be adjusted by variation of the substituents in the ligand backbone or at the nitrogen atoms to give access to transition-metal compounds that can exhibit unusual geometries and/or low coordination numbers [19]. α-Diimine nickel complexes were highly active in ethylene polymerization. For these complexes, the catalytic activities increased with polymerization temperatures and the highest activity was observed at 100°C, and these complexes represent one of the most active and thermally stable catalysts in ethylene polymerization [20]. α-Diimine Ni(II) catalysts gave poly(methyl methacrylate) with high molecular weight and narrow molecular weight distribution [21, 22].

This paper describes the synthesis of Schiff base “diethyl 4,4-(pentane-2,4- diylidenebis (azanylylidene)) benzoate” (1) and its complexation with Ni(II) (2) and Zn(II) (3), characterized by elemental analyses, FT-IR, ¹H NMR, ¹³C NMR UV-Vis spectroscopy and magnetic susceptibility. The Gaussian 09 [23] suite of programs was used to perform geometrical optimizations for the ligand, tautomer, and complexes of Ni(II), Zn(II). All calculations including ¹H NMR, ¹³C NMR, IR, free energy (ΔG), E(thermal), CV and entropy (S), and molecular geometry optimization were carried out at the M06-2x/6-31G(d) level of theory [23].

2. Results and Discussion

Diethyl4,4-(pentane-2,4-diylidenebis(azanylylidene)) benzoate (1) was prepared by the synthetic methodology described by Feldman and coworkers in good yield [24] (Scheme 1). Condensation of 2,4-pentanedione with benzocaine in the presence of HCl in boiling ethanol afforded 1 HCl, which upon neutralization with Na₂CO₃ gave the free ligand 1 as a pale orange solid (Scheme 1). Compound 1 is stable in the normal conditions and to complexation with metal ions; however, it is advisable to store 1 under an atmosphere of inert gas.

The appropriate metal complexes of Ni(II) (2) and Zn(II) (3) were obtained by the reaction sequence shown in Scheme 2. β-Diketimine 1 was converted to the respective Na salt 1-Na by treatment of 1 with sodium acetate in ethanol in the ratio of 1 : 1. Consecutive dropwise addition of this solution to equimolecular amounts of the corresponding anhydrous metal salts MCl₂ (M = Ni, Zn) dissolved in ethanol at 60°C for 4 h gave the respective transition metal complexes 2 and 3 (Scheme 2). After appropriate work-up, complex 2 was isolated as green and 3 as colorless solid in high yields. Compounds 1–3 were characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy, elemental analysis and their melting points (Scheme 3).

Scheme 2: Preparation of 3-diketimine and its tautomer.

Scheme 3: Preparation of complexes of metal ions Ni(II) and Zn(II).

3. Characterization

3.1. ¹H NMR-Spectra

From the ¹H NMR spectra of compound 1, the peak at 4.95 ppm is due to the (N=CCHCNH) proton of the carbon atom between the diimine groups while these protons in acetylacetone between the two carbonyl groups appear at 3.91 ppm. The peak at 1.98 ppm arises by the 6 protons of the two N=C-CH3 segments while these protons in acetylaceton appear at 2.25 ppm. A singlet peak which appears at 12.61 ppm is assigned for the NH tautomer (25% based on the signal integration). Compound 1 is formed as a pale orange solid and has low melting point 155°C. In the complexes, the signals underwent small changes up to 0.11–0.18 ppm, which is attributed to the increased charged delocalization upon complexation. On the other hand, the singlet peak at 12.61 ppm disappeared indicating deprotonation and coordination of the nitrogen with the metal ion and quartet peak at 4.1 ppm in the spectra of complexes for 2H in CH₃CH₂OH and singlet peak at 3.5 ppm for proton of OH group and triplet peak at 1.1 ppm for 3H of methyl group in ethanol. These peaks did not appear in the spectra of ligand; this means the ethanol molecule is in coordination with metal ions. By comparing experimental data of ¹H NMR with theoretical data for ligands and complexes, we observe that they are identical to each other, and this indicates that the theoretical data is acceptable (Table 1).

Table 1: ¹H and¹³C NMR theoretical and experimental values for the structures of 1 & 2 (in ppm).

¹H NMR theoretical
¹H NMR experimental
¹³C NMR theoretical
¹³C NMR experimental

β-Diketimine 1

Benzene ring
7.41–8.2
7.38–8.07
1C
168
166.3

43H, 44H, 50H, 51H
4.5
4.3
3C
169
166.3

4H, 55H
3.6
3.1
2C
42
38.5

(45H, 46H, 47H, 52H, 53H, 54H)
1.35–1.45
1.34
35C & 37C
158
156

7C & 17C
155
153

(28H, 29H, 30H, 32H, 33H, 34H)
1.94–2.3
1.99–2.1
14C & 24C
129
128

Benzene ring
121–130
122–132

41C & 48C
63
61

42C & 49C
19
16

27C & 31C
26
24

β-Diketimine tautomer of 1

55H
12.3
12.61
1C
152
153.6

Benzene rings
7.42–8.4
7.38–8.07
3C
168
166.3

4H
5.1
4.95
2C
69
61

(43H, 44H, 50H, 51H)
4.6
4.3
17C
147
143

7C
158
153

(45H, 46H, 47H, 52H, 53H, 54H)
1.34–1.45
1.34
35C & 37C
158
156

Benzene rings
123–133
122–135

1.96–2.2
1.99–2.2
41C & 48C
65
61

(28H, 29H, 30H, 32H, 33H, 34H)

27C & 31C
26
24

42C & 49C
18
16

Ni(II) β-diketimine 2

Benzene rings
7.1–8.7
7.25–8.4
9C
24.1
25

(52H, 53H, 59H, 60H)
4.45
4.8
51C & 58C
22
20

4H
5.3
5.2
16C & 20C
27
25

11H, 12H
3.85
4.15
10C
70
71

6 methyl groups
1.25–2.65
1.24–2.52
50C & 57C
67.8
63

65H
3.16
3.51
2C
72
71

13H, 14H, 15H
1.11
1.1
24C & 34C
155
153

Benzene rings
124–135
125–137

1C & 3C
172
169

44C & 47C
161
158

Zn(II) β-diketimine 3

Benzene rings
7.2–8.5
7.3–8.2
60C
23.5
24

(45H, 46H, 52H, 53H)
4.6
4.72
44C & 51C
20
18

4H
5.2
5.1
28C & 32C
28
24

61H, 62H
3.9
4.1
59C
69
70

6 methyl groups
1.2–2.7
1.23–2.5
43C & 50C
68.3
61

58H
3.2
3.45
2C
70
72

63H, 64H, 65H
1.14
1.1
8C & 18C
156
154

Benzene rings
123–133
124–135

1C & 3C
170
168

37C & 39C
159
157

3.2. ¹³C NMR-Spectra

The ¹³C NMR spectra of the free ligand were observed in CDCl₃. The peak at 166.3 ppm is due to the carbon atom of the imine group (C=N), and the peak at 153.6 ppm is due to the carbon atom (=CNH) and that at 58.9 ppm is due to the carbon atom in C=CNH (tautomer). Downfield shifting is noticed of the imine group (C=N) and C-NH from 166.3 and 153.6 ppm in the free ligand to 168 and 169 ppm in the case of Zn(II) and Ni(II) complexes, respectively. By comparing the experimental data of the ¹³C NMR with the theoretical data for ligand and complexes, the theoretical data (Table 1) are comparable to the experimental data here, too.

3.3. FT-IR and UV-Vis Spectra

The spectroscopic data for ligand and metal complexes in Table 2 are in good agreement with the expected values. The FT-IR spectra of two complexes compared with those of the ligands indicate that the υ(C=N) band at 11629 cm⁻¹ is shifted to lower frequency by ∼10 and 20 cm⁻¹ in the complexes, indicating that the ligands are coordinated to the metal ions through the nitrogen atom: υ(N-H) at 2240 cm⁻¹, υ(N=C) at 1629 cm⁻¹, υ(N-C(Me)) at 2998 cm⁻¹, and υ(NC(Ar)) at 2120 cm⁻¹. New bands were observed only in the spectra of the transition metal complexes at 512 and 519 cm⁻¹ and not in the ligand, which are due to the nitrogen-metal stretching vibrations. Therefore, based on the FT-IR data, Schiff base ligand connects to metal as bidentate. By comparing the experimental data with the theoretical data, we find that they are identical to each other, and this indicates that the theoretical data is acceptable. As a conclusion, the theoretical data of the ligand and its metal complexes confirm the coordination of the ligand to the corresponding metal ion bidentately through β-ketiminato functionality.

Table 2: Selected IR-vibration values (theoretical and experimental) (cm⁻¹) of 1–3.

Compound
Theoretical IR
Experimental IR

β-Diketimine 1
ν(C=N)
1638
1629

ν(C=O)
1758
1724

ν(1C-2 C)
1780
1772

ν(N-Ar)
2123
2095

β-Diketimine tautomer of 1
ν(C=N)
1638
1628

Ν(1C-6NH)
1562
1523

ν(C=O)
1755
1724

ν(6N-H)
3290
3300

ν(1C-2 C)
1738
1692

ν(N-Ar)
2123
2120

Ni(II) β-diketimine 2
ν(C=N)
1628
1619

ν(C=O)
1755
1723

ν(N-Ar)
2123
2093

ν(Ni-N)
520
512

Zn(II) β-diketimine 3
ν(C=N)
1625
1612

ν(C=O)
1767
1745

ν(Ni-N)
540
528

The electronic spectra of Schiff base ligand and Ni(II) complexes was recorded in CH₂Cl₂ (Figure 1). As seen, the Schiff base ligand shows a strong band at 381 nm which can be associated to n ⟶ π transition of the azomethine chromophore. This band disappears in complexes after bonding Schiff base ligand to metal center [25]. All the bands in the 200–300 nm region are attributed to the π ⟶ π∗ transitions of the aromatic rings and the azomethine group. The ligand bands shift to longer wavelengths in the metal complexes as compared to their position in the free ligand which indicates the bond between Schiff base and metal center [26]. Complexes (2) shows absorption in the region 500–530 nm assigned to ¹A1g to ¹B1g transition and 473 nm assigned to ¹A1g to ¹B2g and absorption in the region 243–276 nm assigned to intraligand charge transfer band, which again suggests square-planar geometry. Generally, Zn(II) complexes do not exhibit any d-d electronic transition due to its completely filled d¹⁰ electronic configuration but often exhibit charge transfer spectra. The Zn(II) complex shows an absorption band at 414 nm attributed to the (L to M) charge transfer transition, which is compatible with this complex having a tetrahedral geometry [27].

Figure 1: The electronic spectra of the free β-diketimine Schiff base ligand and the related Ni(II) complexes in CH₂Cl₂ solution.

3.4. Magnetic Susceptibility Measurements

The magnetic moments of Zn(II) complex is zero; its diamagnetic properties and Ni(II) complex are zero (diamagnetic), which indicates that the complex has square-planar structure.

3.5. Geometry Optimization

The M06-2x/6-31G(d) level of theory was used for structure optimization of 1–3. Figures 2–4 show the optimization geometry of the β-diketimine ligand 1, the β-diketimine tautomer (Figure 2) and coordination complexes 2 and 3 (Figures 3 and 4). The bond lengths and bond angles for 1–3 are summarized in Tables 3 and 4. The corresponding thermodynamic parameters (free energy (ΔG), E (thermal), CV, and entropy (S)) are presented in Table 5.

Figure 2: Structure of the model compound used to evaluate M06-2x/6-31G(d) for the optimized structure of the β-diketimine Schiff base ligand 1 and its tautomeric equilibrium.

Figure 3: Structure of the model compound used to evaluate M062x/6-31G(d) for geometry optimization of the Ni(II)-β-diketimine complex 2.

Figure 4: Structure of the model compound used to evaluate M062x/6-31G(d) for geometry optimization of the Zn(II) β-diketimine complex 3.

Table 3: Selected bond lengths and bond angles calculated at the M062x method with the 6-31G(d) basis set for 1 and its tautomer.

β-Diketimine
β-Diketimine tautomer

Bond length (A°)

1C-2C
1.515
1.370

2C-3C
1.509
1.445

1C-6N
1.273
1.362

3C-5N
1.273
1.297

3C-31C
1.509
1.515

1C-27C
1.510
1.505

7C-5N
1.404
1.399

17C-6N
1.406
1.397

Bond angle (°)

6N-1C-27C
126.46
119.76

5N-3C-31C
126.58
124.11

5N-3C-2C
116.80
120.60

6N-1C-2C
118.66
120.78

1C-6N-17C
121.21
122.41

3C-5N-7C
120.98
122.47

Table 4: Selected bond lengths and bond angles calculated at the M062x method with the 6-31G(d) basis set for complexes 2 and 3.

Ni(II) β-diketimine (2)
Zn(II) β-diketimine (3)

Bond length (A°)

1C-2C
1.436
1C-2C
1.412

2C-3C
1.430
2C-3C
1.401

1C-6N
1.321
1C-7N
1.327

3C-5N
1.330
3C-6N
1.332

3C-16C
1.520
3C-32C
1.515

1C-20C
1.518
1C-28C
1.516

24C-5N
1.408
8C-6N
1.399

34C-6N
1.410
18C-7N
1.416

Ni-5N
1.877
Zn-6N
1.998

Ni-6N
1.878
Zn-7N
1.979

Ni-Cl
2.182
Zn-Cl
2.231

Ni-O
1.845
Zn-O
2.119

Bond angle (°)

6N-1C-20C
119.91
7N-1C-28C
120.32

5N-3C-16C
120.05
6N-3C-32C
120.10

5N-3C-2C
123.78
6N-3C-2C
123.58

6N-1C-2C
123.11
7N-1C-2C
123.96

1C-6N-34C
117.01
1C-7N-18C
121.71

3C-5N-24C
117.14
3C-6N-8C
122.00

6N-Ni-Cl
172.04
7N-Zn-Cl
121.77

5N-Ni-Cl
96.06
6N-Zn-Cl
123.01

O-Ni-Cl
88.05
O-Zn-Cl
102.65

O-Ni-5N
173.52
O-Zn-6N
96.28

O-Ni-6N
89.88
O-Zn-7N
111.70

5N-Ni-6N
93.50
6N-Zn-7N
99.02

Table 5: Free energy (G), E (thermal), CV, and entropy (S) calculated for structures 1, 2, & 3.

G (hartree/particle)
E (kcal/mol)
CV (cal/mol-kelvin)
S (cal/mol-kelvin)

β-Diketimine
−1301.59
305.152
106.571
204.985

β-Diketimine tautomer
−1301.60
305.939
105.983
195.669

Ni(II) β-diketimine
−3424.22
357.139
128.748
223.575

Zn(II) β-diketimine
−3696.00
358.389
133.230
237.364

The optimized molecular structure of the Ni(II) β-diketimine complex 2 is depicted in Figure 3, the bond lengths and angles are given in Table 4. The bond distances of the (Ni-N), (Ni-Cl), and (Ni-O) bonds were calculated to (1.867 Å), (2.226 Å), and (1.845 Å), respectively, and experimentally the distance range of (Ni-N) bond is (1.860–1.857 A°) [28, 29], (Ni-Cl) bond is (2.196 A°) [30], and (Ni-O) bond is (1.844–1.851 A°) [28, 29]. The respective bond angles of 2 were found to be 88.05° for (Cl-Ni-O), 93.50° for (5N-Ni-6N), 173.52° for (5N-Ni-O), 89.88° for (6N-Ni-O), 96.06° for (Cl-Ni-5N), and 172.04° for (Cl-Ni-6N). The calculated results are in good agreement with experimental data characteristic for Ni(II) Schiff base complexes [28–30]. The obtained structural values confirm the anticipated square-planer arrangement of 2.

The optimized molecular structure of the appropriate Zn(II) β-diketimine complex 3 is shown in Figure 4, the bond lengths and angles are summarized in Table 4. The bond distances of the (Zn-N), (Zn-Cl), and (Zn-O) bonds were calculated to (1.979 Å–1.998 Å), (2.228 Å), and (2.119 Å), respectively, and experimentally the distance range of (Zn-N) is (2.165–2.247 Å) [31], (Zn-Cl) is (2.333 Å) [32], and (Zn-O) is (2.064–2.277 Å) [31]. The bond angles of (Cl-Zn-O), (6N-Zn-7N), (6N-Zn-O), (7N-Zn-O), (Cl-Zn-6N), and (Cl-Zn-7N) are 102.2°, 99.0°, 96.3°, 98.7°, 102.1°, and 100.8°, respectively. The found bond distances and angles agree well with the ones typical for similar Zn(II) Schiff base complexes [32, 33]. The overall structure of 3 is tetrahedral.

4. Conclusion

In conclusion, we have synthesized compound 1 (new ligand) and two complexes with ZnII and NiII metal ions and characterized the ligand and the complexes by ¹³C NMR, ¹H NMR, IR, and elemental analysis and determined the optimized structures and determined the ¹³C NMR, ¹H NMR, and IR values by the M062x/6-31G(d) level of theory. The theory confirms that the structure of Zn(II) complex is tetrahedral and square planar for the Ni(II) complex. It was found that they have no effect on the growth of any microorganism taken.

5. Experimental Section

All chemicals were purchased from Aldrich and used as received. NMR spectra were recorded on Bruker 300 MHz and AC 75 MHz spectrometer with CDCl₃ as a solvent and standard. IR spectra were recorded as KBr disks with a Matsson 5000-FT-IR spectrophotometer within the range of 4000–500 cm⁻¹. The electronic spectra were obtained on a Shimadzu UV-1601 spectrophotometer. Elemental analyses were carried out on Thermo Scientific OEA Flash 2000 Analyzer. Magnetic susceptibility measurements of the complexes in the solid state were determined by a Gouy balance at room temperature using mercury(II) tetrathiocyanatocobaltate(II) as the calibrant.

5.1. Synthesis of the Diethyl 4,4′-(Pentane-2,4-diylidenebis(azanylylidene)) Benzoate Compound 1

A mixture of benzocaine (1.65 g, 0.01 mol) and 2,4-pentanedione (1.00 g, 0.010 mol) was heated at 60°C in the presence of HCl and ethanol for 4 h. Then the mixture was neutralized by addition of Na₂CO₃ in methanol. The title compound 1 was obtained as a pale orange solid after recrystallization from ethylacetat: n-hexane (3 : 7) (2.84 g, 7.16 mmol) based on (72% yield).

Mp.: 155°C. ¹H NMR (CDCl₃, 300 MHz) δ 1.98 (s, 6H) 2CH₃C = N, 12.61(s, 1H, NH, tautomer) 4.95 (s, H, CH) N=CCH=CNH, (7.38 (d, 4H), 8.07(d, 4H)) (benzene rings), 4.3 (q, 4H) CH₂CO, 1.34–1.45 (t, 6H) 2CH₃ CH₂O. ¹³C NMR (CDCl₃, 75 MHz) δ 153.6, 166.3, 61.0, 48, 153, 156, 122–135, 24, 16. FT-IR (KBr, cm⁻¹): 2240.79, 1629, 2998.66, 1667, 2122, and 2120. UV-vis in CH₂Cl₂, λ, (nm): 401, 352, 268, 235. Anal. C₂₃H₂₆N₂O₄, calcd. C 70.03, H 6.64, N 7.10, found C 69.84, H 6.52, N 6.98%.

5.2. Synthesis of the Ni(II) β-Diketimine Complex 2

Compound 1 (3.94 g, 0.01 mol) and 1.297 g, 0.01 mol of anhydrous NiCl₂ were mixed dropwise in presence of sodium acetate in ethanol and refluxed for 4 hours. A green solid was formed (4.16 g, 7.8 mmol) based on 78% yield. Mp: 239°C. ¹H NMR (CDCl₃, 300 MHz) δ 7.25–8.4(benzene rings), 4.8 (q, 4H) 2(-CH₂OCO), 5.2 (s, 1H), 4.15 (q, 2H) –OCH₂CH₃, 1.1(t, 3H) –OCH₂CH₃, 3.51 (s, 1H) OH group. ¹³C NMR (CDCl₃, 75 MHz) δ 25, 20, 71, 63, 153, 125–137, 169, 158. UV-vis in CH₂Cl₂, λ, (nm): 528, 473, 276, 243. Anal. C₂₅H₃₁ClN₂O₅Ni (523.31): calcd (C 56.26; H 5.85; Cl 6.64; Ni 11.00; N 5.25), found (C 56.39; H 5.68; Cl 6.29; Ni 11.27; N 5.19). FT-IR (KBr, cm⁻¹): 1619, 1723, 2093, and 512. The magnetic moment of Ni(II) complex is zero which indicates that the complex has square-planar structure.

5.3. Synthesis of the Zn(II) β-Diketimine Complex 3

3.94 g, 0.01 mol of compound 1 and 1.36 g, 0.01 mole of ZnCl₂ anhydrous were mixed dropwise in presence sodium acetate in ethanol and refluxed for 4 hours, a white diamagnetic solid was formed (3.44 g, 6.4 mmol) based on 64% yield. Mp: 287°C. ¹H NMR (CDCl₃, 300 MHz) δ 7.3–8.2(benzene rings), 4.72 (q, 4H) 2(-CH₂OCO), 5.1 (s, 1H), 4.1 (q, 2H) –OCH₂CH₃, 1.1(t, 3H) –OCH₂CH₃, 3.45 (s, 1H) OH group. ¹³C NMR (CDCl₃, 75 MHz) δ 24, 18, 70, 61, 154, 124–135, 168, 157. Anal. C₂₅H₃₁ClN₂O₅Zn (538.12): calcd (C 55.57; H 5.78; Cl 6.56; N 5.18; Zn 12.10), found (C 55.76; H 5.44; Cl 6.88; N 5.42; Zn 12.26). FT-IR (KBr, cm⁻¹): 1612, 1745 and 528.

Data Availability

The data used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest

The authors declare that they have no conflicts of interest.

References

L. Bourget-Merle, M. F. Lappert, and J. R. Severn, “The chemistry of β-diketiminatometal complexes,” Chemical Reviews, vol. 102, no. 9, pp. 3031–3066, 2002.

P. L. Holland, “Electronic structure and reactivity of three-coordinate iron complexes,” Accounts of Chemical Research, vol. 41, no. 8, pp. 905–914, 2008.

B. E. Maryanoff, “Adventures in drug discovery: potent agents based on ligands for cell-surface receptors,” Accounts of Chemical Research, vol. 39, no. 11, pp. 831–840, 2006.

S. G. McGeachin, “Synthesis and properties of some β-diketimines derived from acetylacetone, and their metal complexes,” Canadian Journal of Chemistry, vol. 46, no. 11, pp. 1903–1912, 1968.

S. Nagendran and H. W. Roesky, “The chemistry of aluminum(I), silicon(II), and germanium(II),” Organometallics, vol. 27, no. 4, pp. 457–492, 2008.

K. Ding, A. W. Pierpont, W. W. Brennessel et al., “Cobalt−Dinitrogen complexes with weakened N−N bonds,” Journal of the American Chemical Society, vol. 131, no. 27, pp. 9471-9472, 2009.

E. A. Ison and A. Ison, “Synthesis of well-defined copper N-heterocyclic carbene complexes and their use as catalysts for a “click reaction”: a multistep experiment that emphasizes the role of catalysis in green chemistry,” Journal of Chemical Education, vol. 89, no. 12, pp. 1575–1577, 2012.

R. Bruckner, Advanced Organic Chemistry: Reaction Mechanisms, Elsevier, Amsterdam, Netherlands, 2001.

A. Juris, V. Balzani, F. Barigelletti, S. Campagna, P. Belser, and A. Von Zelewsky, “Ru(II) polypyridine complexes: photophysics, photochemistry, eletrochemistry, and chemiluminescence,” Coordination Chemistry Reviews, vol. 84, pp. 85–277, 1988.

P. G. Hayes, W. E. Piers, and R. McDonald, “Cationic scandium methyl complexes supported by a β-diketiminato (“Nacnac”) ligand framework,” Journal of the American Chemical Society, vol. 124, no. 10, pp. 2132-2133, 2002.

P. G. Hayes, W. E. Piers, and M. Parvez, “Cationic organoscandium β-diketiminato chemistry: arene exchange kinetics in solvent separated ion pairs,” Journal of the American Chemical Society, vol. 125, no. 19, pp. 5622-5623, 2003.

H. Chen, P. Liu, H. Yao, Y. Zhang, Y. Yao, and Q. Shen, “Controlled synthesis of mononuclear or binuclear aryloxo ytterbium complexes supported by β-diketiminate ligand and their activity for polymerization of ε-caprolactone and L-lactide,” Dalton Transactions, vol. 39, no. 29, pp. 6877–6885, 2010.

J. E. Parks and R. H. Holm, “Synthesis, solution stereochemistry, and electron delocalization properties of bis(.beta.-iminoamino)nickel(II) complexes,” Inorganic Chemistry, vol. 7, no. 7, pp. 1408–1416, 1968.

P. B. Hitchcock, M. F. Lappert, and D.-S. Liu, “Transformation of the bis(trimethylsilyl)methyl into a β-diketinimato ligand; the X-ray structure of [Li(L′L′)]₂, SnCl(Me)₂(L′L′) and SnCl(Me)₂(LL), [L′L′= N(R)C(ph)C(H)C(ph)NR, LL = N(H)C(ph)C(H)C(ph)NH, R = SiMe₃),” Journal of the Chemical Society, Chemical Communications, no. 14, pp. 1699-1700, 1994.

G. B. Deacon and Q. Shen, “Complexes of lanthanoids with neutral π donor ligands,” Journal of Organometallic Chemistry, vol. 511, no. 1-2, pp. 1–17, 1996.

R. Jiao, M. Xue, X. Shen, Y. Zhang, Y. Yao, and Q. Shen, “A comparative study on the reactivity of tris-β-diketiminate ytterbium complexes: steric effect of β-diketiminato ligands,” European Journal of Inorganic Chemistry, vol. 2010, no. 17, pp. 2523–2529, 2010.

S. I. M. Paris, Ü. A. Laskay, S. Liang et al., “Manganese(II) complexes of di-2-pyridinylmethylene-1,2-diimine di-Schiff base ligands: structures and reactivity,” Inorganica Chimica Acta, vol. 363, no. 13, pp. 3390–3398, 2010.

Y.-C. Tsai, “The chemistry of univalent metal β-diketiminates,” Coordination Chemistry Reviews, vol. 256, no. 5–8, pp. 722–758, 2012.

K. C. MacLeod, B. O. Patrick, and K. M. Smith, “Reactivity of Cr(III) μ-oxo compounds: catalyst regeneration and atom transfer processes,” Inorganic Chemistry, vol. 51, no. 1, pp. 688–700, 2011.

J. Vela, J. M. Smith, Y. Yu et al., “Synthesis and reactivity of low-coordinate iron(II) fluoride complexes and their use in the catalytic hydrodefluorination of fluorocarbons,” Journal of the American Chemical Society, vol. 127, no. 21, pp. 7857–7870, 2005.

L. Guo, S. Dai, and C. Chen, “Investigations of the ligand electronic effects on α-diimine nickel(II) catalyzed ethylene polymerization,” Polymers, vol. 8, no. 2, p. 37, 2016.

I. KimJ.-S. Kim, B. H. Han, and C.-S. Ha, “Polymerization of methyl methacrylate with nickel α-diimine catalysts: effect of the methyl position in the ligand,” Macromolecular Research, vol. 11, no. 6, pp. 514–517, 2003.

M. J. Frisch, G. W. Trucks, H. B. Schlegel et al., Gaussian 16, Revision B.01, Gaussian, Inc, Oxfordshire, UK, 2016.

J. Feldman, S. J. McLain, A. Parthasarathy, W. J. Marshall, J. C. Calabrese, and S. D. Arthur, “Electrophilic metal precursors and a β-diimine ligand for nickel(II)- and palladium(II)-Catalyzed ethylene polymerization,” Organometallics, vol. 16, no. 8, pp. 1514–1516, 1997.

M. Galini, M. Salehi, M. Kubicki, A. Amiri, and A. Khaleghian, “Structural characterization and electrochemical studies of Co(II), Zn(II), Ni(II) and Cu(II) Schiff base complexes derived from 2-((E)-(2-methoxyphenylimino)methyl)-4-bromophenol; evaluation of antioxidant and antibacterial properties,” Inorganica Chimica Acta, vol. 461, pp. 167–173, 2017.

M. Jafari, M. Salehi, M. Kubicki, A. Arab, and A. Khaleghian, “DFT studies and antioxidant activity of Schiff base metal complexes of 2-aminopyridine. Crystal structures of cobalt(II) and zinc(II) complexes,” Inorganica Chimica Acta, vol. 462, pp. 329–335, 2017.

H. Temel, S. İlhan, M. Şekerci, and R. Ziyadanoğullari, “The synthesis and spectral characterization of new Cu(II), Ni(II), Co(III), and Zn(II) complexes with schiff base,” Spectroscopy letters, vol. 35, no. 2, pp. 219–228, 2002.

R. P. Scaringe and D. J. Hodgson, “Structural characterization of N,N′-ethylenebis(1,1,1-trifluoroacetylacetoneiminato)nickel(II),” Inorganic Chemistry, vol. 15, no. 5, pp. 1193–1196, 1976.

Q. Meng, J. K. Clegg, K. A. Jolliffe, L. F. Lindoy, M. Lan, and G. Wei, “A new nickel(II) coordination polymer derived from [Ni(N,N-ethylenebis(1,1,1-trifluoroacetylacetoneiminato)] and 1,4-diazabicyclo[2.2.2]octane,” Inorganic Chemistry Communications, vol. 13, no. 4, pp. 558–562, 2010.

J. R. Zimmerman, B. W. Smucker, R. P. Dain, M. J. Van Stipdonk, and D. M. Eichhorn, “Tridentate N₂S ligand from 2,2′-dithiodibenzaldehyde and N,N-dimethylethylenediamine: synthesis, structure, and characterization of a Ni(II) complex with relevance to Ni Superoxide Dismutase,” Inorganica Chimica Acta, vol. 373, no. 1, pp. 54–61, 2011.

M. C. Rodriguez-Argüelles, M. B. Ferrari, G. G. Fava et al., “2,6-Diacetylpyridine bis(thiosemicarbazones) zinc complexes: synthesis, structure, and biological activity,” Journal of Inorganic Biochemistry, vol. 58, no. 3, pp. 157–175, 1995.

L. Taghizadeh, M. Montazerozohori, A. Masoudiasl, S. Joohari, and J. M. White, “New tetrahedral zinc halide Schiff base complexes: synthesis, crystal structure, theoretical, 3D Hirshfeld surface analyses, antimicrobial and thermal studies,” Materials Science and Engineering: C, vol. 77, pp. 229–244, 2017.

A. Mumtaz, T. Mahmud, M. Elsegood, and G. Weaver, “Synthesis and characterization of new Schiff base transition metal complexes derived from drug together with biological potential study,” Journal of Nuclear Medicine and Radiation Therapy, vol. 7, no. 2, 2016.