Utilization of 3D Laser Scanning for Stability Evaluation and Deformation Monitoring of Landslides

Three-dimensional laser scanning technology can comprehensively and accurately monitor slope deformation. To conduct deformation monitoring and stability evaluation of the Changzhou Shunguoshan landslide, in this paper, the causes of the Changzhou Shunguoshan landslide were analyzed. Consequently, 3D laser scanning technology and the traditional monitoring methods such as data from the total station were compared. The point cloud data provides big data support for landslide deformation monitoring and landslide stability early warning. Meanwhile, the landslide stability was evaluated by analogy with existing studies on slope deformation monitoring data. Results show that the three-dimensional laser scanning monitoring data is similar to the total station monitoring data. The overall deformation of the Shunguoshan landslide is no more than ± 0.0015 m; the deformation of the Liyang slope is less than ±0.09 m, which is far less than the analog slope deformation monitoring data. The slope construction and monitoring process are in a stable state.


Introduction
In recent years, geological disasters caused by natural or human factors have had significant impacts on the safety of human life and property and the environment [1,2]. e specific manifestations are collapse, landslide, debris flow, ground subsidence, ground fissure, ground subsidence, etc. As far as China is concerned, from 2018 to 2021, geological disasters occurred frequently, resulting in a large number of casualties and economic losses. How to reduce the damage and safety hazards caused by geological disasters, it is imperative to "improve the comprehensive monitoring, early identification and forecasting and early warning capabilities of multiple disasters and disaster chains" [3]. e geological disasters in recent years are shown in Figure 1.
Due to the diversity of the Earth's topography (large undulating terrain, many mountains, and hills) and the variability of climate and plate movement [4,5], rainfall or earthquakes reduce the shear strength of soil and rock layers on slopes [6,7], and landslides have become one of the most frequent disasters in geological disasters. As far as the landslide deformation monitoring technology is concerned, according to the degree of monitoring automation, the current slope deformation monitoring can be roughly divided into two types, namely, conventional engineering deformation monitoring technology and slope informationization/automation monitoring technology (new slope deformation monitoring technology) [8]. Among them, 3D laser scanning technology is one of the most rapidly developing information/automatic displacement monitoring technologies in the past two decades [9]. e current slope information/automatic monitoring technology (new slope deformation monitoring technology) is shown in Table 1.
As a new type of slope deformation monitoring technology, 3D laser scanning technology is superior to the timeconsuming and complex traditional conventional engineering monitoring technology. It is featured with fast timeliness, high accuracy, and high spatial resolution [10]. e importance of 3D laser scanning in slope deformation monitoring can not only monitor slope deformation in a timely, effective and comprehensive manner, but also obtain slope deformation data. In addition, it can also play the role of slope disaster prevention and early warning to ensure the safety of people's lives and property. In China, Huang et al. [11] introduced 3D laser scanning technology and applied it to a slope engineering case, which proved its feasibility in slope deformation monitoring and developed rapidly. Subsequently, Chen et al. [12] established a new method for calculating the volume of landslides by using 3D laser scanning technology, which provided a useful tool for subsequent landslide research. Ma et al. [13] introduced it into the landslide physical model test and compared the overall deformation and displacement of landslide monitoring through different methods (e.g., point cloud stacking and comparison, gravity center method, and fitting method). e introduction of 3D laser scanning technology into engineering cases has gained momentum. e research directions of this field (or landslide) include slope deformation monitoring, landslide volume calculation, refined analysis of landslides, stability evaluation, and disaster prevention and early warning [14][15][16][17][18][19][20][21]. Research on the application of 3D laser scanning technology under different slope types is shown in Table 2.
rough the existing application research and analysis, the research on the principle and point cloud data processing of 3D laser scanning technology tends to be mature, and it can be applied to the actual working conditions of different slope types with certain reliability. And the application in the field of landside has been developed to a certain extent, but there are few researches on landslide deformation monitoring and stability evaluation based on 3D laser scanning. erefore, the 3D laser scanning technology is used to monitor the slope deformation of the Shunguoshan landslide in Changzhou, which provides big data support for landslide deformation analysis and hazard assessment. It is compared with the deformation data measured by the total station to achieve complementation with the traditional monitoring method. e point cloud data analysis provides big data support for landslide deformation monitoring and landslide stability early warning, and the landslide stability evaluation is obtained by analogy with existing studies on slope deformation monitoring data.    e ground angle of the slope is trapezoidal. Landslide 1 (HP1) (see Figures 2 and 3) is located on the southeast side of the survey area. e length along the slope is about 60 m, the elevation of the top of the slope is +47∼+54 m, the elevation of the bottom of the slope is +4 m ∼+6 m, the height difference is 40∼52 m, and the slope is 34°∼42°.

Overview of Shunguoshan Landslide
Due to geological structure and engineering activities (mining), the slope on the northeast side of Shunguo Mountain is high and steep. is is coupled with the special structure of the slope (congruent slope) and stratigraphic lithology (quartz sandstone mixed with silty mudstone), local under the action of heavy rainfall (for several consecutive days in March 2018). As a result, the shear strength of the rock mass decreased. e mudstone softened in water, resulting in collapse and landslide geological disasters.
Specifically, the slope aspect is consistent with the stratum dip angle, the slope is a slope-following structure, and the slope surface is high, steep, and empty. e slope body undergoes creep deformation under the action of gravity, and the slope body has horizontal and vertical displacement. e changes of these displacements further stretch and expand the originally developed joints/cracks in the slope, and cracks appear in the slope.

Principle of 3D Laser Scanning.
e 3D laser scanner adopts active laser scanning technology to detect the monitoring target in all directions to obtain precise positioning. e distance L is calculated by measuring the phase difference or time difference required for the first laser pulse to travel from the instrument to the monitored landslide surface and return and to measure the horizontal declination angle α and elevation angle β at the same time. e positioning principle is shown in Figure 4.

3D Laser Scanning Equipment and Operation Process.
In order to carry out 3D laser scanning of the slope, a Leica MS60 scanner is used, and the angle measurement accuracy can reach 0.5". is measurement adopts 1000 Hz mode for scanning, its ranging accuracy is 300 m/1.0 mm, and the distance is 50 m. e relevant parameters are shown in Table 3. e main process of scanning is shown in Figure 5

On-Site Data Collection.
After the construction of the slope of Shunguo Mountain was completed, two phases of scanning work were completed successively by 3D laser scanning. e status of the slope during the operation period before and after the rainy season was monitored and analyzed, as shown in Figure 6.  [14] e three-dimensional laser scanning technology is used to monitor it, and the point cloud data acquisition and processing are used to analyze its deformation characteristics to study the slope's distortion accurately.
(2019) [15] e sloping structure is scanned by 3D laser scanning technology, and a comprehensive, reasonable and reliable 3D point cloud structure database is created.
Water conservancy engineering slope Hu Chao et al. (2015) [16] Using 3D laser scanning technology to calculate the excavation volume of the slope, a new algorithm for calculating the volume of the excavation body using laser scanning data is proposed.

Mountain slope
Yiheng Pan et al. [17] (2014) e design, data acquisition, data processing and data analysis of 3D laser scanning monitoring scheme are systematically introduced. From this, the overall deformation characteristics of Ginkgo landslide and the advantages and disadvantages of 3D laser scanning technology in landslide monitoring are obtained.
Kociuba W et al. [18] (2014) e application of terrestrial laser scanning (TLS) to accurately model land landforms and quantitatively estimate spatial and temporal transformations can contribute to a better understanding of watershed formation processes.

High road slope
Mengyuan Si, etc. [19] (2020) ree-dimensional laser scanning technology is used to study its deformation monitoring to evaluate and warn the slope stability Cliffside Kuhn, D. et al. [20] (2014) Using 3D laser scanning technology, high-resolution laser scans of the ground surface (including landslide expansion, spatial and temporal variations) were performed over five years of a cliff, and calculations were performed to quantify the large volumes that lead to erosion processes and slope instability. High Slope of Domestic Waste Incineration Power Plant Wenlian Liu et al. [21] (2021) e spatial distribution and geometric form of argillized interlayers in rock slopes are analyzed and studied by using 3D laser scanning technology.
Journal of Environmental and Public Health e first phase of scanning work was carried out on May 16, 2020. On the afternoon of May 16, the main part of the slope was scanned. e scanning distance was 170 m, and the horizontal and vertical point intervals of the farthest point were 5 mm and 10 mm, respectively. e second scan was carried out on the afternoon of November 28 after the rainy season. e distance, range, and point interval of this scan were basically the same as those on May 16.

Initial Modeling of Slope.
e collected original point cloud data of Shunguoshan was filtered and denoised to remove redundant information and noise data. Consequently, the point cloud data was registered, and a solid model was established corresponding to the slope according to the slope shape and point cloud data, namely, the 3D model reconstruction. e detailed process and method are shown in Table 4. e initial modeling of the slope is shown in Figure 7.

Point Cloud Data Analysis.
On the afternoon of May 16, 2020, the main part of the slope was scanned, with a scanning distance of 170 m, and the horizontal and vertical point intervals of the farthest point were 5 mm and 10 mm, respectively; the second phase of the scanning operation was carried out on the afternoon of November 28. e scanning distance, range, and point interval are the same as those on May 16. e chromatogram analysis is carried out through the polyworks software superimposed through the twophase data acquisition. For the specific analysis of the chromatogram, please refer to Figure 8.
A total of 37 displacement monitoring points are arranged in the slope deformation monitoring area, and six monitoring points, J8, J9, J10, J12, J13, and J14, are selected in the scanning area (as shown in Figure 9). e direction and level changes are shown in Figure 10.
Results showed that the three-dimensional laser scanning monitoring data was similar to the total station monitoring data, and the vertical data at points J12, J13, and J14 had an error of 1 mm, which may be related to the actual weather and operation at that time. Among them, the maximum vertical displacement of the laser is 0.0015 m, the maximum horizontal displacement of the laser is 0.0009 m, and the displacement does not exceed ±1.5 mm, indicating that the treated slope is in a stable state. After the rainy season, the slope is still stable, and the slope protection has reached the design target.
We compared the vertical and horizontal monitoring data with the total station as shown in Figure 11.

Case Analysis of 3D Laser Scanning
Monitoring during Slope Construction e three-dimensional laser scanning monitoring of the Shun Guoshan project was performed during the operation period. In order to examine the applicability of the 3D laser scanning method during the construction period, we carried out the 3D laser scanning construction period monitoring of a slope under construction in Liyang area at the same time, and we carried out a research on the instability risk evaluation of the high slope during the construction period. e Liyang Slope is located in Liyang, Changzhou, on the northwest side of the slope of Shunguo Mountain, about 110 kilometers apart.

Raw Point Cloud Data Acquisition and Initial Modeling.
We go to the monitoring site and complete the first on-site application, the collection of raw point cloud data. e collected original point cloud data is filtered and denoised to remove redundant information and noise data. en the point cloud data is spliced, that is, three-dimensional modeling. e preliminary results are shown in Figure 12.

Analysis of Slope Body Deformation in Area a.
Following the second 3D laser scanning, the point cloud data of the first and second scans are superimposed to obtain the analysis effect diagram of the slope deformation point cloud of the second-1st period. e analysis flow chart of area A is shown in Figure 13.
Deformation diagram of slope body in area A (point cloud data chromatogram comparison diagram) is shown in Figure 14. According to the point cloud data, from the analysis of phase 2-1 and phase 3-2 deformation maps, the overall displacement of the slope here is relatively stable, and the deformation is less than ±0.05 m. Although the local fluctuation is large, there is no obvious change. Preliminary finding is that there is no overall slump risk of the slope here. However, the surface layer of the slope, especially the thirdlevel slope, has the risk of local collapse and the fall of weathered rock and soil. Attention should be paid to the follow-up construction process and strengthen construction protection.

Journal of Environmental and Public Health
According to the observation of phase 4-3, the displacement of the slope surface is relatively stable as a whole. e deformation amount is less than ±3 cm, and there is no obvious local fluctuation and large deformation. Since all the slope excavation has been completed and there is less disturbance, there is no overall risk of collapse of the slope here. However, the subsequent construction process may impact the slope, and it is necessary to pay attention to observation and strengthen protection. e deformation diagrams of phases 5-4 and 6-5 are analyzed. e displacements of grades 4, 5, and 6 and the slopes of grades 3 and 4 are relatively small, and the overall stability is relatively stable. No obvious construction safety hazards are found. According to different points in the chromatogram, it can be observed that the thirdlevel slope and the first-level slope have an uneven local settlement, and certain support methods should be adopted.  Point cloud simplification Simplify the reconstructed model to make the analysis as easy as possible 5 Deformation measurement e models in different periods are superimposed and analyzed through point cloud superposition to obtain deformation data  In phase 7-6, the slope displacement is small, the overall is relatively stable, and the difference between the point cloud data and the previous phase is small.
ere is no obvious construction safety hazard.
To sum up, during the construction process, the maximum deformation of the slope here is not more than ±0.05 m, and there is a certain degree of uneven settlement locally, but the whole is in a stable state. With the progress of construction protection, the state of the slope becomes more and more stable.

Analysis of Slope Body Deformation in Area b.
After the third 3D laser scanning of the slope, the schematic diagrams of the point cloud data of the second and third scans were superimposed. e purpose is to obtain the effect diagram of the slope deformation point cloud of the third and second phases. e analysis flow chart of area B is shown in Figure 15.
Deformation diagram of slope body in area B (point cloud data chromatogram comparison diagram) is shown in Figure 16. According to the point cloud data, the deformation maps of phases 2-1 and 3-2 were observed. e displacement of the slope surface was relatively small, the overall stability was relatively stable, and there were no obvious construction safety hazards. However, some points in the chromatogram were selected in phase 3-2, and it can be observed that the slope has uneven settlement and uplift of ±0.1 m, and attention should be paid to later construction and protection.
According to the analysis of the deformation diagrams of phases 4 and 3, the displacement of the fourth, fifth, and sixth slopes is relatively small, the overall stability is relatively stable, and there is no obvious hidden danger of construction safety. However, by clicking on some different points in the chromatogram, it can be observed that the third-level slope has uneven settlement and uplift of ±0.04 m, which is due to the local uneven deformation caused by blasting construction and excavation and unloading of the second-level slope. Certain support methods should be adopted.
In the 5-4th, 6-5th and 7-6th phases, the slope displacement of the slope is relatively stable as a whole, the deformation amount is less than ±0.015 m, and there is no obvious local fluctuation large deformation. Since there is no construction excavation shortly and there is a less artificial disturbance, there is no overall risk of slope collapse here. However, the subsequent construction process may impact the slope, and it is necessary to pay attention to observation and strengthen protection. Phases 7-6 indicate that the excavation below the slope causes less disturbance to the upper part.
In short, during the construction process of this slope, there are local settlements and uplifts with a maximum amount of no more than ±0.1 m and the whole is in a stable state. With the progress of construction protection, there are fewer safety hazards on the slope.

Comparative Analysis of Deformation and Displacement of Each Slope.
ree-dimensional laser scanning technology was used to monitor the Shunguoshan slope in Changzhou and the two slopes in Liyang, and the deformation data was obtained through point cloud data processing, which was compared with the data in the previous studies, as shown in Table 5.  It can be observed that the monitoring deformation data of Shunguoshan slope in Changzhou is much smaller than that in the analogy literature [19]. e slope has been designed for slope reduction, load reduction, anchor cable anchoring, stone retaining wall, and greening design and is in a stable state.
Similarly, the monitored deformation data of the two slopes in Liyang are slightly larger than the maximum displacement of Shun over the mountain and far smaller than the monitoring data of the slope deformation in the analogous literature [17,20].
e slope stability has a certain influence, resulting in deformation, yet it is still in a stable state.
However, the research in this paper has certain limitations. is paper only discusses the application of 3D laser scanning technology in monitoring slope deformation, including horizontal displacement, vertical displacement, and absolute displacement. However, 3D laser scanning can not only monitor slope deformation and displacement, but also perform landslide volume calculation and landslide refinement analysis, which is the focus of future research.
At the same time, 3D laser scanning technology still has certain shortcomings. Its equipment cost is high, and the price of 3D scanning machine is relatively expensive; it is greatly affected by bad weather and cannot operate normally under weather conditions such as heavy fog, heavy rain, and strong wind. Point cloud data also produces a lot of noise, and point cloud data processing is difficult. However, geological disasters such as landslides often occur under the influence of extreme weather. erefore, how to monitor the  slope deformation under extreme weather conditions (threedimensional laser scanning monitoring) is the focus of future researches.

Conclusion
ree-dimensional laser scanning was used to obtain the surface displacement of the slope through intermittent monitoring to develop a sloping point cloud data map to examine the stability of the slope. e landslide deformation map was analyzed based on the vertical displacement change and the horizontal displacement change under the splicing of point cloud data. For the slope of Shunguo Mountain that experienced the rainy season, the results showed that the maximum vertical displacement of the landslide was 0.0015 m, and the maximum horizontal displacement was 0.0009 m. e amount of landslides is not more than 0.0015 m, and the landslide is in a stable state. For the same two slopes in Liyang, the maximum displacement of slope A is 0.0323 m, and the maximum displacement of slope B is 0.0889 m, and the slope as a whole is in a stable state.
3D laser scanning can analyze the overall slope and examine it accurately to any point. e data obtained by scanning feature points makes the data of the entire surface have more detailed precision.
Unlike traditional methods, 3D laser scanning monitoring has a certain degree of accuracy, and noncontact measurement points are more digital and information-based. It can complement traditional monitoring methods, improve the efficiency of slope monitoring, and provide data support for slope protection, early warning, and stability assessment. e slope monitoring method of 3D laser scanning is suitable for slope monitoring during operation as well as slope monitoring during construction. It can be widely used in geological disaster warning and engineering construction projects in the future. e successful application of 3D laser scanning technology in the deformation monitoring of Shunguoshan slope further demonstrates the feasibility of 3D laser scanning technology, provides a new solution for slope deformation monitoring, and provides future landslide warning and slope stability. e evaluation provides an example and accumulates experience for the popularization and application of advanced slope technology in the future.

Data Availability
Upon request, the data supporting the conclusion of our study are accessible from the corresponding author.

Conflicts of Interest
e authors declare that there are no conflicts of interest.