Convolutional Neural Network Face Recognition Method Using Fisher’s Criterion

In order to further improve the ability of automatic feature extraction of deep learning technology and better solve the problem of system recognition ability declining when the number of training samples is reduced or the number of iterations is reduced, this paper proposes a sher-based convolutional neural network algorithm, which automatically obtains the structural feature information of a face image with the help of a deep learning algorithm network and then reduces the number of weights with the help of a convolutional neural network to further reduce the complexity of the face recognition model. rough the system test, the verication data shows that the recognition error rate can be controlled at about 10% by extracting 10 of the 14 pictures of each type of face for training. When the training images are reduced, the recognition rate can be further improved.


Introduction
Face information is not only the external representation element that can directly express features but also the most natural biometric information. Face recognition technology is a special biometric technology to identify and authenticate individuals with the help of each person's di erent facial feature information [1]. With the rapid development of science and technology, face recognition technology has been applied to various elds of production and life, such as community access systems, mobile phone unlocking systems, mobile payment systems, and so on. In fact, face recognition and authentication are to carry out image comparison and recognition with the help of naturally taken pictures and system-registered certi cate photos, and then provide technical support for intelligent life. e fusion of convolutional neural networks greatly improves the accuracy of classi cation problems, especially the combination with a face recognition system, which can better distinguish the corresponding attributes of the face and design better optimization functions by obtaining more data. is paper is based on this and further improves the e ect of face recognition by using the Fisher criterion [2]. Figure 1 is a method and process of facial expression recognition based on a convolutional neural network.

Literature Review
In recent years, research on face recognition technology has achieved remarkable results. For example, some scholars have proposed the algorithm research of face recognition based on Fisher linear discrimination. First, the mean value of each class of face image is found through the Fisher linear discrimination method, then the distribution matrix in the class and the di usion matrix between classes are calculated, and nally, the optimal projection value of the face image is found and the face weight is obtained [3][4][5].
ere are also many research studies on face recognition in moving scenes. For example, we studied the face recognition access and control system using a convolutional neural network. In the system, two speci c people are allowed to enter after 5 seconds of separate recognition in the video sequence, and the entry is blocked when the presence of external people in the visual area is detected. e experimental accuracy is 95% with the proposed Fisher vector coding method with binary features. e Fisher vector (FV) coding based on local scale-invariant feature transform (SIFT) is one of the best codings. In order to speed up the calculation time of this method, the FV coding method based on the binary feature has been introduced. By using binary robust independent basic features (brief ), this method obtains high efficiency but also loses accuracy. e FV representation of binary features requires appropriate mathematical tools, which are not as easy to obtain as continuous features. erefore, a new method of FV coding to obtain binary features is proposed, which is still effective and accurate. Experiments also verify that this method has the same good performance as video face recognition obtained by SIFT features [6]. e model-based face recognition method uses facial features to connect with the model and establish a feature model for face recognition. More commonly used models, such as the hidden Markov model, simulate the changes of image features by using a Markov chain. Some scholars have proposed an improved hidden Markov face recognition method. By segmenting the image feature sequence, and then using some observation sequences to calculate the maximum similarity of all hidden Markov models, and selecting the hidden Markov model with high similarity, which effectively reduces the calculation times of the feature vector and improves the speed of face recognition [7][8][9]. In the research work of deep learning, some scholars have designed a new convolutional neural network structure, which makes full use of the advantages of the spatial pyramid pooling layer, replaces the traditional pooling layer with a spatial pyramid pooling layer, improves the expression of deep features of samples, greatly improves the training speed and the recognition rate, studied the application of the particle swarm optimization algorithm, used PCA technology to extract facial features, and then used the particle swarm optimization algorithm to optimize the parameters of SVM. Experiments on ORL and Yale face databases have achieved high recognition accuracy.

Face Recognition Algorithm
(1) See Figure 2 for details Define the linear sample set as follows: e classification function is as follows: where en the distance between any sample and the optimal hyperplane can be expressed as follows: e distance between the classification surface and the nearest sample is as follows: when r ′ is the largest, the optimal classification surface is determined, and its corresponding constraints are In order to solve the optimal classification surface, Lagrange multiplier method can be introduced, that is as follows: Let L calculate the partial derivative of w and b to 0, that is as follows: en you can get e above quadratic function can be solved, and the optimal discriminant function is as follows: 3.1.2. Nonlinear Support Vector Machine. For the nonlinear sample classification problem, the support vector machine uses the kernel function of the input space. While solving the optimal hyperplane, first compare the vectors in the input space and then nonlinear transform the results, which greatly reduces the amount of calculation. Figure 3 shows that the low-dimensional linear separable problem is transformed into a high-dimensional linear separable problem by using a kernel function and then classified by a linear support vector machine [10].
Define the kernel function as K(x i , x j ), so that en the optimal discriminant function is as follows: Kernel functions mainly include the following: Linear kernel function: Gaussian kernel function: Polynomial kernel function:

Application of Support Vector Machine Face Recognition.
Traditional support vector machines usually use a single core to deal with linear inseparable problems, so the selection of kernel function is a key point. In practical applications, experience or experiments are often used to select the most appropriate kernel function, which will increase the workload. Moreover, the features of data samples may be fused by a variety of features, such as color features, statistical features, geometric features, and so on. e optimal kernel functions corresponding to different features may also be different, so the performance of a single core for complex face image recognition is not high, and it becomes meaningful for multi-core learning and research [11,12]. Support vector machines have great advantages in dealing with small sample learning problems and have a solid theoretical foundation [13].

Depth Convolution Recognition Algorithm
Based on Fisher Criterion

Algorithm Process.
To make the algorithm easier to classify, we provide the working force based on the distance between classes, based on the concept of the Fisher test. e formula is as follows: Triangle class r r' w T x+b=0 Pentagram

Linear inseparable
High dimensional linear separability Mobile Information Systems Equation (17) is the function of measuring class consistency, defined by the sum of the spacing of each model and their class average; equation (18) is the similarity measurement function between classes, which is defined as the sum of the distances of the mean values of all sample classes. M (i) is the average value of class i samples To make it easier to distribute the acquired characteristics of each layer of deep learning in the network, we provide models of working forces with different class and class constraints.
In the abovementioned formula, R is the cost function of the neural network, and the overall cost function is J. While considering the error, it makes the intra class spacing of samples small and the inter class spacing large [14,15].

Multitask Attribute Based Face Analysis.
e system diagram of multitask training is shown in Figure 4. First, the databases for each task are preprocessed in the same way and then input into the shared network for training. Finally, they are tested on the corresponding data sets. Table 1 lists the details and usage of each database.4.
Each layer of a convolutional neural network extracts features. e features at the bottom are more basic, and the more upward, the more abstract the features are. According to our idea, in the network of face attribute analysis, the underlying features should be the same and gradually become different as we go up [16]. erefore, we use the multitask learning method to combine the face attribute analysis task with the face recognition task, sharing the parameters of the previous convolution layer so that the network can learn more comprehensive content, while the latter full connection layer is separated and classified separately, so that we can learn different features [17,18].
We use MTCNN for face detection and key point location of all database images, then we use the similarity transformation of five points for image alignment, intercept and zoom to the image size of 256 × 256, and finally, divide the image pixel value by 128 after subtracting 127.5, normalize the value to [−1,1] and input it into the network for training. e experimental platform is Ubuntu 16.04. A total of four NVIDIA Tesla P100 GPUs are used for training. e depth learning tool used is PyTorch, with an initial learning rate of 0.1. e number of pictures trained in each iteration of each task is 256. When the iterative training reaches 20000 and 30000 times, the learning rate will be reduced by 10 times, and finally the training will be stopped when the number of iterations reaches 40000 times. e impulse and weight attenuation parameters used in training are 0.9 and 0.0005, respectively. Different tasks assign different loss function weights to them. e details are shown in Table 2.
We also conducted single-task training for these several face attribute analysis tasks and compared them with the multitask learning method. Table 3 is the accuracy rate of face recognition task on LFW. Table 4 is the accuracy rate of gender recognition task on Adience. Table 5 is the accuracy rate of age recognition task on Adience. Table 6 is the performance of age recognition task on MORPH Performance. Table 7 is the accuracy of the expression recognition task on FER2013 [9,19].    As can be seen from Table 7, our method has achieved 92% accuracy in gender recognition tasks and also has achieved good accuracy in age recognition and expression recognition tasks. At the same time, the accuracy of multitask is higher than that of a single task, which shows that different face attribute analysis tasks can promote each other. It is worth noting that the accuracy of multitask face recognition decreases slightly, which may be related to the amount of training data. Because the training data for face recognition itself is enough, adding other databases has a certain impact on it.
e weight proportion of the loss function is different between different tasks, which also affects the results. In addition, the classification training of face recognition is divided into many categories, including about 10000 categories. It is a relatively fine classification and has high requirements for accuracy. Adding other databases for training interferes with it [20,21].

Face Recognition System Based on Improved Convolutional Neural Network.
e traditional convolutional neural network will use the Softmax regression function for regression classification after feature extraction.
e classifier can deal with two classification and multiclassification problems, and the calculation is simple.
e Softmax classifier can accurately calculate the probability that the sample belongs to each class, so as to determine the class of the sample. In the face database in this paper, the recognition degree of faces is greatly affected by the environment, so this paper selects the support vector machine with a stronger classification ability as the classifier [22]. e face recognition system includes three stages: face image preprocessing; feature extraction of a convolutional neural network; and classification of a support vector machine. e face image preprocessing stage includes image normalization, Gaussian filtering, and image histogram equalization. In order to ensure the consistency of the images, it is necessary to normalize the images. Image normalization includes geometric normalization and gray normalization. Geometric normalization is used to solve the problem of different face sizes and poses due to different image acquisition distances. Gray normalization is used to solve the influence of illumination intensity and light source intensity on the face image. Gray normalization usually includes two steps: gray change and stretching. For example, if the average value of an image is m and one pixel of the image is f(x, y), the standard deviation σ of the image is as follows: e gray transformation formula of the image is as follows:     Mobile Information Systems However, the pixel value of the transformed image may not be within the gray value range, so it is necessary to stretch the mapped image to make its pixel values within the range of 0∼255. e specific transformation formula is as follows: e images used in this paper are gray-scale images, so it is necessary to normalize the gray-scale images to transform the images into the required standard size form. Because there are some noise factors in the face database, which have nothing to do with the research content of the experiment, they will interfere with the extraction of some key information from the image and affect the subsequent image processing work. erefore, in order to reduce the influence of noise factors on the experimental results, the Gaussian filtering method is adopted in this paper. Gaussian filtering is widely used in image denoising. is method uses a known convolution check to convolute the pixels of the image, and uses the weighted average gray value in its neighborhood to replace the pixel value of the central point of the neighborhood. It is an efficient process of facial feature extraction based on convolution neural networks [23]. e training flow chart of a convolutional neural network based on the Fisher criterion is shown in Figure 5.
In the training process, the sensitivity of each layer is calculated by the Fisher criterion algorithm, and the increment of weight and bias is calculated to update it. After the convolution neural network is trained, the image features can be extracted. In this paper, a 6-layer convolution neural network is constructed. e input image goes through the convolution operation and sampling operation layer by layer. Finally, a face image is mapped into 120 feature images, and each feature image contains some local information about the original image. e classification stage of support vector machines also includes the training and discrimination of support vector machines. In the training stage, the image features extracted by the convolutional neural network are normalized and transmitted to the support vector machine for training. In this paper, the kernel function of the support vector machine is a Gaussian kernel function, in which the parameter C and the grid search method are used to optimize the parameters. e grid search method is an exhaustive method of parameter optimization, which is suitable for all parameter optimization problems.
e specific implementation method is as follows: first, the penalty factor and the search range of the parameters are selected according to experience; then the different growth directions of the two parameters are extended by using a fixed step size to form a grid shape; and finally, the accuracy is obtained by using the method of cross verification. In the discrimination stage, the sample set to be classified is preprocessed and extracted by the face system, expressed as a feature vector, and input into the trained support vector machine. Finally, the accuracy of face recognition is evaluated [24].

Experimental Results and Analysis.
In order to prove the robustness of the algorithm proposed in this paper, this chapter will carry out a series of experiments on the ORL face database, Yale face database, and AR face database, respectively, and compare this algorithm with classical face recognition algorithms such as the SCNN algorithm, traditional neural network, convolutional neural network, and sparse self-coding network, so as to verify the effectiveness of the convolutional neural network and the support vector machine algorithm based on Fisher criterion.

Introduction to Experimental Database.
e ORL face database contains 400 face images of 40 volunteers. ese face images include the changes of volunteers' posture, expression, and facial ornaments. e original image size is 112 × 92. In the preprocessing stage of the face recognition system, the image needs to be initialized to the size of 28 × 28. e Yale face database contains a total of 165 face images of 15 volunteers. e data set included different changes in volunteers' facial posture, light intensity, and expression. e size of the image is 100 × 100, which needs to be uniformly converted to the size of 28 × 28. e AR face database contains 3000 images of 126 volunteers. In this paper, 120 people in the database, 13 images per person, are selected as the database. e database contains the occlusion, expression, and small pose changes of the face. e original size of the AR face image is 768 × 576, which also needs preprocessing to reduce the image to 28 × 28.

Experimental Results and Analysis of ORL Face
Database.
e experiment was carried out on the ORL face database. e parameters of the convolution neural network are set as follows: the size of the C1 and C3 convolution kernel is 5 × 5, the size of the C5 convolution kernel is 4 × 4, the lower sampling layer adopts mean sampling, the sampling window is 2 × 2, the network adopts batch training, the activation function adopts a Sigmoid function, the learning rate is 0.01, the values of parameters α and β are 0.02, the network threshold is initialized to 0, and the kernel function selected by the support vector machine is a Gaussian kernel function. Figure 6 shows the comparison of the recognition rate of the algorithm in this paper (FSCNN) and the classical CNN when iterating on the ORL library for different times. From the figure, it can be seen that the recognition rate of the algorithm in this paper is significantly improved and the convergence is better than that of the CNN method.
In order to test the recognition rate of this algorithm under different numbers of training samples, 2, 4, 6, and 8 face images of each type in the ORL library are trained, respectively, and the remaining images are used for testing. e experimental results are shown in Table 8. It can be seen that this algorithm can also obtain high recognition effects with fewer training samples, and the overall recognition rate is stronger than other methods.

Experimental Results and Analysis of the Yale Face
Database.
e experiment was carried out on the Yale face database, and the parameters are the same as those of the ORL database. Compare the method in this paper with CNN and record the experimental results, as shown in Table 9. From the table, it can be seen that compared with CNN, the   Figure 7 mentioned above, and the experimental data are recorded as shown in Table 10. From Table 10, it can be concluded that the algorithm in this paper improves significantly when there are few samples, which verifies the effectiveness of the algorithm in this paper.

Recognition of Different
Training times. 60000 training samples were selected in the experiment, and the training times increased from 1 to 10. e experimental results are shown in Table 11. e experimental results show that when the training times are more than 10 times, there is no difference between the two recognition rates. When the training times are reduced to only once, the recognition rate of the proposed method is improved by 1.15% compared with the traditional method. When the number of trials is increased, most machine learning methods will improve the recognition rate accordingly, but the more training times, the longer the time will be consumed. However, in practical application, it is required to complete the recognition quickly in a short time.
e experimental results show that the algorithm proposed in this paper can better meet the actual needs, especially for handwritten word databases. When the same training times are small, the recognition rate of the method proposed in this paper is significantly improved.

For AR Database, When the Training Is Different, the Identification Error of Different Methods Is Analyzed.
e database contains color photos of 126 people. Each type of people has changes in light, size, and expression, with a total of 2600 pictures. A total of 120 people are selected, and 14 pictures of each person are tested. During the experiment, 4, 7, and 10 pictures are taken from 14 pictures of each type of people for training, and other images are tested. e experimental results are shown in Table 12.
It can be seen from the results that when 10 images are taken from 14 images of each type of person for training and the rest are tested, the recognition error rate of most methods is 10%, but when the training images of each type of person are reduced, the recognition rate of the improved     Mobile Information Systems algorithm proposed in this paper is higher than that of other algorithms. In other words, when the labeled training data is less, the method proposed in this study is more effective.

Conclusion
Face recognition has become a hot topic in our time, and its use plays an important role in many areas. is paper describes the development algorithms for the extraction and distribution of facial expressions and proves the effectiveness of the experimental algorithms. e main role of this sentence is as follows: (1) Outreach characteristics are a prerequisite for facial recognition. In this paper, a broken neural network is used to decompose facial features and cannot be repaired by training the network. is paper describes the improvement of the neural network algorithm in this paper because the speed of recognition of neural networks decreases rapidly with the reduction of training standards. e Fisher indicator is used to calculate operating costs and change patterns. In addition, vector technology is used as an alternative to the simple classifier of a convolutional neural network. Experiments have shown that this algorithm has a higher percentage of recognition, improved compatibility, and a better alternative when the model is smaller.
(2) Due to the limitations of single-core auxiliary vector machines for learning and distribution, this paper provides support for vector machine algorithms with mixed-core operations which integrate important functions into global and local roles. Local education skills will be improved, and international assessment scores will be improved. Supporting vector systems with integrated cores are combined with enhanced neural network systems to improve the overall capacity distribution of the system. e test results also confirm the performance of the algorithm.
In this study, facial recognition based on neural networks and vector support systems was devised to eliminate facial and dividing faces. Facial removal is very important in postoperative work, and the neural network has many advantages over removal features. erefore, in this article, the disruptive neural network is used as a signal breaker. To improve the neural network performance of commercial products, the author has introduced a neural network dysfunction algorithm based on Fisher procedures, which can reduce the distance between similar models and increase the distance between different models when an error occurs between the actual release and the model. e label should be as small as possible. Face feature classification is a key and difficult point. Feature extraction and feature classification are two functions of a general convolutional neural network. A Softmax classification layer will be added after the full connection layer. Softmax has great advantages in multiclassification, but support vector machines are also very successful in dealing with nonlinear and multidimensional problems and have stronger classification ability. erefore, a support vector machine is used for classification and prediction in this paper. e effectiveness of the algorithm in this paper is also verified through experimental comparisons on three face databases: ORL, AR, and Yale.
Data Availability e labeled data set used to support the findings of this study is available from the corresponding author upon request.

Conflicts of Interest
e authors declare that there are no conflicts of interest.