Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

Surface roughness is often considered the main purpose in contemporary computer numerical controlled CNC machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and high level are considered to optimize the surface roughness for finish turning based on L9 34 orthogonal array. Additionally, nine fuzzy control rules using triangle membership function with respective to five linguistic grades for surface roughness are constructed. Considering four input and twenty output intervals, the defuzzification using center of gravity is then completed. Thus, the optimum general fuzzy linguistic parameters can then be received. The confirmation experiment result showed that the surface roughness from the fuzzy linguistic optimization parameters is significantly advanced compared to that from the benchmark. This paper certainly proposes a general optimization scheme using orthogonal array fuzzy linguistic approach to the surface roughness for CNC turning with profound insight.


Introduction
Machining operations have been the core of the manufacturing industry since the industrial revolution 1 .The existing optimization researches for computer numerical controlled CNC turning were either simulated within particular manufacturing circumstances 2-5 or achieved through numerous frequent equipment operations 6, 7 .Nevertheless, these are regarded as computing simulations, and the applicability to real-world industry is still uncertain.Therefore, a general deduction optimization scheme without equipment operations is deemed to be necessarily developed.
The machining process on a CNC lathe is programmed by speed, feed rate, and cutting depth, which are frequently determined based on the job shop experiences.However, the machine performance and the product characteristics are not guaranteed to be acceptable.

Mathematical Problems in Engineering
Therefore, the optimum turning conditions have to be accomplished.It is mentioned that the tool nose runoff will affect the performance of the machining process 8 .Therefore, the tool nose runoff is also selected as one of the control factors in this study.
Parameter optimization is a hard-solving issue because of the interactions between parameters.Problems related to the enhancement of product quality and production efficiency can always be related to the optimization procedures.Taguchi method, an experimental design method, has been widely applied to many industries.It can not only optimize quality characteristics through the setting of design parameters but also reduce the sensitivity of the system performance to sources of variation 9-12 .The Taguchi method adopts a set of orthogonal arrays to investigate the effect of parameters on specific quality characteristics to decide the optimum parameter combination.These kinds of arrays use a small number of experimental runs to analyze the quality effects of parameters as well as the optimum combination of parameters.
To achieve the general optimization, it is necessary to first describe the dynamic behavior of the system to be controlled.Because of the number, complexity, and unclear, vague nature of the variables of the dynamic systems that may influence the decision maker's decision, fuzzy set theory is the most suitable solution 13, 14 .Fuzzy linguistic models permit the translation of verbal expressions into numerical ones 15 .Therefore, the inputoutput relationship of the process can be described by the collection of fuzzy control rules involving linguistic variables rather than a complicated dynamic mathematical model.
With all the viewpoints above, this paper considers four parameters cutting depth, feed rate, speed, and tool nose runoff with three levels low, medium, and high to optimize surface roughness in CNC finish turning.The fuzzy control rules using triangle membership function with respective to five linguistic grades for surface roughness are additionally constructed.The defuzzification is then quantified using center of gravity and introduced to Taguchi experiment.Thus, the optimum fuzzy linguistic parameters can then be received.This paper definitely proposes a general deduction optimization approach and satisfactory fuzzy linguistic technique for improving surface roughness in CNC turning with profound insight.

Methodology
In this paper, the linguistic variable quantification and parameter optimization for CNC turning operations are proposed using fuzzy set theory and Taguchi method, respectively.They are described as below.

Fuzzy Set Theory
Let X be a universe of discourse; A is a fuzzy subset of X if for all x ∈ X, there is a number μ A x ∈ 0, 1 assigned to represent the membership of x to A, and μ A x is called the membership function of A. A triangular fuzzy number A can be defined by a triplet a, b, and c Figure 1 16 .The membership function is defined as In this paper, the two most important parameters for surface roughness are primarily concluded through literature review.Additionally, nine fuzzy control rules for surface roughness using triangle membership function with respective to five linguistic grades will be constructed following IF-THEN rules.
To eliminate the computation, four input parameter and twenty output quality intervals are considered to prepare the defuzzification.Through Cartesian product, the degree of membership for both input and output can thus be attained as Here, "Input" describes the parameter, "Output" represents the quality, and R denotes the fuzzy relation between the parameter and quality.
The "OR" rules are then utilized for combining rules for maximum degree of membership as where R1 and R2 symbolize for the two rules.In this study, the average value using center of gravity is determined to represent the fuzzy set as where F x i is the final rating of activity, and μ A x i describes the membership function of fuzzy set A.

Taguchi Method
The Taguchi method is a robust design method technique 17, 18 , which provides a simple way to design an efficient and cost-effective experiment.In order to efficiently reduce the Mathematical Problems in Engineering numbers of conventional experimental tasks, the orthogonal array 10, 19 by using design parameters control factors in column and standard quantities levels in row is proposed and further adopted.The performance measure, signal-to-noise ratio S/N 20 proposed by Taguchi is used to obtain the optimal parameter combinations.The larger S/N means that the relation to the quality will become better.The lower quality characteristic will be regarded as a better result when considering the smaller-the-best quality.The related S/N ratio is defined as where n is the number of experiments for each experimental set, and y i expresses the quality characteristic at the ith experiment.On the contrary, the larger quality characteristic will have better result when considering the larger-the-best quality, therefore, by taking the inverse of quality characteristic into 2.5 , the related S/N ratio can also be deduced and shown in S/N −10 In this study, the defuzzification result for CNC machined surface roughness is introduced to the Taguchi experiment as the S/N ratio.In addition to the S/N ratio, a statistical analysis of variance ANOVA 21 can be employed to indicate the impact of process parameters.In this way, the optimal levels of process parameters can be estimated.

Research Design
Surface roughness is considered the quality in this paper.Four parameters with three levels are selected to optimize the surface roughness in finish turning based on the L 9 3 4 orthogonal array.Additionally, nine fuzzy control rules with respective to five linguistic grades for surface roughness are constructed.Considering four input and twenty output intervals, the defuzzification using center of gravity is thus completed and introduced into the Taguchi experiment.Therefore, the optimum fuzzy linguistic parameters can then be received.

Construction of Orthogonal Array
In this study, the four turning parameters A speed, B cutting depth, C feed rate, and D tool nose runoff 22 with three different levels low, medium, and high see Table 1 are constructed for the deduction optimization of machining operation.In Table 1, the three levels of speed, cutting depth, and feed rate are considered according to the machining handbook suggested by the tool manufacturer.The tool nose runoff is positioned by using different shims located under the tool holder.The orthogonal array is then selected to perform the nine sets of deduction experiments.

Fuzzy Control Rules
The nine fuzzy control rules with respective to five linguistic grades for the surface roughness in this paper are constructed.The five linguistic grades for surface roughness are determined as excellent, good, fair, poor, and worst.From the existing literature 23 , it is found that the surface roughness can be expressed as R i i a, zD, t, p, q, 3z C i V mi f ni , where the machining speed V and feed rate f are concluded as major parameters to surface roughness.Therefore, the fuzzy rules can be described as follows.

Defuzzification
In this paper, the three parameter levels are selected based on the Taguchi experimental method, therefore, the triangle membership function is related to the peak point of its fuzzy area.Considering four input and twenty output intervals, the defuzzification of five linguistic grades using center of gravity can then be completed.Since two major parameters are considered for surface roughness, the input parameter membership functions are regarded as the intersection of two fuzzy sets, and the height of fuzzy set is considered as μ 1 Figure 2 .The degree of membership for input parameter and output quality can be described as shown in Tables 2 and 3, respectively.Utilizing the average value of the fuzzy set to represent the entire set, we then have the quantified result for the fuzzy item of five linguistic grades as shown in Table 4.

Results and Discussion
By considering the parameter combinations of the nine sets of experiment based on the L 9 3 4 orthogonal array, the quantified results from fuzzy deduction for the machining surface roughness are determined and shown in Table 5.
Introducing the deduction result as the signal-to-noise ratio S/N for surface roughness, the results of factor responses are calculated and listed in Table 6.The mean effects for S/N ratios are then drawn by MINITAB 14 and shown in Figure 4. Therefore, the optimum fuzzy linguistic turning parameters are found to be A(High , B (High, Medium, and Low), C (High), and D (Low).

Confirmation Experiment
The finishing diameter turning operation of S45C ϕ45 mm × 250 mm work pieces on an ECOCA-3807 CNC lathe is arranged for the experiment.The TOSHIBA WTJNR2020K16 tool holder with MITSUBISHI NX2525 insert is utilized as the cutting tool.The four turning parameters speed, cutting depth, feed rate, and tool nose runoff with three different levels low, medium, and high Table 7 are experimentally distinguished for the machining operation on the basis of L 9 3 4 orthogonal array.In Table 7, the three levels of speed, cutting depth, and feed rate are identified from the machining handbook suggested by the tool manufacturer.The tool nose runoff is positioned by using different shims located under the tool holder and determined by measuring the tip after the face turned the work piece.When the tool nose is set approximately 0.1 mm higher lower than the center of the work piece, it is regarded as "High Low ".When the tool nose is set within ±0.03 mm, it is considered as "Medium".The surface roughness R a of machined work pieces is measured on the MITSUTOYO SURFTEST at three different sections of 40 mm, 80 mm, and 120 mm from the face, therefore, the average data are received as the surface roughness.To verify the applicability of the optimum result achieved by our proposed general optimization technique, the machining operations under both fuzzy Taguchi deduction optimization parameters and benchmark parameters A medium: 200 m/min , B medium: 2 mm , C medium: 0.3 mm/rev , and D medium: ±0.03 mm , which are often introduced into the confirmation experiment in many of the studies 7, 24 for comparison to the optimum parameters, are performed on the CNC lathe.The machined results are concluded and listed in Table 8.From Table 8, it is observed that the surface roughness under fuzzy linguistic parameters is significantly improved by

Concluding Remarks
In this paper, the fuzzy linguistic optimization was proposed and applied to achieve the optimum CNC finish turning parameters under the considerations of surface roughness.
A confirmation experiment of the optimum fuzzy linguistic parameters was conducted to indicate the effectiveness of the proposed optimization method.Through the confirmation test for the proposed method, the experimental results validate the potency that the surface roughness can be significantly advanced from our fuzzy linguistic optimization technique.The considered qualities in the fuzzy linguistic optimization are found valuable for future study to be possibly extended in the real-world machining industry.Future studies are also encouraged to verify the proposed fuzzy linguistic optimization scheme on hard-to-machine metals like stainless steels and titanium alloys.
Parameter optimization is a hard-solving issue because of the interactions between parameters.This paper not only proposes a fuzzy linguistic optimization approach using orthogonal array but also contributes the satisfactory technique for improving machining performance in CNC turning with profound insight.The competition of manufacturing industry will then be economically excited through the development proposed in this study.

Rule 3 . 1 .Rule 3 . 2 .Rule 3 . 5 .Rule 3 . 6 .Rule 3 . 7 .Rule 3 . 8 .
If the fuzzy rules are medium machining speed and low feed rate, then the surface roughness is excellent.If the fuzzy rules are low machining speed and medium feed rate, then the surface roughness is good.Rule 3.3.If the fuzzy rules are low machining speed and high feed rate, then the surface roughness is fair.Rule 3.4.If the fuzzy rules are medium machining speed and medium feed rate, then the surface roughness is fair.If the fuzzy rules are medium machining speed and high feed rate, then the surface roughness is poor.If the fuzzy rules are medium machining speed and low feed rate, then the surface roughness is good.If the fuzzy rules are high machining speed and high feed rate, then the surface roughness is worst.If the fuzzy rules are high machining speed and low feed rate, then the surface roughness is fair.Rule 3.9.If the fuzzy rules are high machining speed and medium feed rate, then the surface roughness is worst.

Figure 3 :
Figure 3: Plot of main effects.

Figure 4 :
Figure 4: Plot of main effects.

Table 2 :
Degree of membership for parameter.

Table 3 :
Degree of membership for surface roughness.

Table 4 :
Quantified results for linguistic results.

Table 6 :
Result of factor responses.

Table 7 :
Parameters and levels.

Table 8 :
Confirmation results.99%, and 15.20%, respectively, and the average result is found to be improved by 18.66% from the benchmark parameters.It is shown that our proposed fuzzy linguistic optimization technique can really advance the surface roughness.