Today production and logistic systems are getting more complex. This is a problem which the planning and design of such systems have to deal with. One main issue of production system development in series production is the planning of production processes and systems under uncertainty. New and existing production technologies are often not fully adoptable to new products. This is why some of the main characteristics, like, for example, cost, time, or quality, are not definable at the beginning. Only value ranges and probabilities can be estimated. However, the adaptation process is controllable, which means that the adaptation results are depending on the existing development budget and its resources. This paper presents an approach for the optimized allocation of development resources regarding the adaptation risks of production technologies and processes. The modeling concept GRAMOSA is used for integrated modeling and discrete event-based simulation of the aspired production system. To this end a domain-specific modeling language (DSML) is applied. The further risk-based analysis of the simulation results and the optimized allocation of the development budget are done by use of mathematical optimization.
1. Introduction
The planning and design of production systems are a challenging task. Production systems are becoming more and more complex and less predictable [1, 2]. In addition to the existing objectives for efficient production of a given set of products, new concepts of changeable manufacturing have to be considered [3]. Flexible and changeable production systems are needed to face the challenges of a global and dynamic market, but this leads directly to an increased complexity [4]. A design concept of a production system has to consider potential developments, which makes the difficult task of production system development even more difficult. The only given approach to handle such complexity is the use of digital engineering solutions, like, for example, the concept of digital factory [5]. Based on the concept of model-driven engineering, the process of production system development is supported by specific IT solutions. These should allow us to model, simulate, and visualize the aspired production system in a digital and virtual way [6]. The concept of digital factory is a promising approach to overcome the needs for a more efficient production system development. At the moment, however, only small domains, like, assembly lines in automotive industry, are able to be planned by latest software concepts [7]. Therefore, a lot of research is needed to make such software concepts more flexible and applicable to other domains. This paper addresses the introduction of risk management in the process of production system development based on a perspective of integrated manufacturing and logistics planning as part of logistics engineering. Thereby, the development risks of the aspired manufacturing and production processes will be assessed and considered in allocation of development budget and resources. A literature review is given in the second chapter, while the third chapter deals with the concept of model-driven logistics engineering using GRAMOSA. The modeling concept GRAMOSA is explained to this end, and a use case of a metalworking production process is defined. In the fourth chapter, the mathematical optimization of the risk-based allocation problem of development budgets and resources is presented. A summary and outlook are given in the fifth chapter.
2. Choice under Uncertainty in Production System Development
In general, the early integration of risk analysis in the production system development process has the potential to eliminate or reduce ramp-up problems and production disturbances in a later phase of production system life cycle [10]. Thereby, the handling of uncertainty is essential for the risk-based evaluation of system alternatives. Münster presents an approach of decision under uncertainty in the case of different design scenarios [8]. Thereby, scenario parameters are defined for each design scenario (Figure 1). The next step is to determine states of uncertain parameters, which can be used to evaluate the design scenarios by states. During the last step, the decision can be made by analyzing and comparing the different design scenarios, for example, by mean values and variances. In principle, also probability distributions can be used; however, in practice, the estimation of different probable states is very difficult, even for domain experts [11].
Production system development under uncertainty; compare [8].
The development of production systems under uncertainty is a big challenge and concerns different levels of production. Inman et al. define the following levels of production system development [12]:
supply chain;
production planning;
system layout;
equipment selection;
production management.
Today, the level of supply chain is very important for the design of production systems regarding decisions about capacity extensions. Kostin et al. present an approach of the strategic planning of an integrated bioethanol-sugar supply chain under uncertainty in the demand [13]. A multiscenario mixed-integer linear programming (MILP) problem is developed that seeks to optimize the expected performance of the supply chain under several financial risk mitigation options. The level of production planning is relevant for process planning. The latter is the systematic determination of production steps to manufacture a product. In order to evaluate a specific process design, it is necessary to get detailed data for such production steps, like, for example, turning or milling, in order to determine the process parameters and their uncertainties. Heilala et al. present a design approach of production systems, which is oriented to sustainability [14]. To this end, they integrated methods for the calculation of energy efficiency and CO2 emissions into factory simulation software. The design of a system layout is still a challenging task, because nowadays the aspects of changeability have to be considered [3]. This includes flexibility, complexity, entropy, and robustness. According to Inman et al., the manufacturing flexibility is the capability of building different products in one system without the need for new machines [12]. Complexity and higher entropy are main issues due to the globalization and smaller lot sizes, while robustness is the characteristic of dealing with fluctuations in operations without decreasing the product quality. Another level of production system design is the selection of equipment. In general, better machines cost more money, but they are faster and produce more parts with fewer failures. However, the process and ressource parameters have to be estimated by domain experts, for what reason all parameters include uncertainties. The last level of production system design is the production management. Production management has a high impact on product quality and equipment availability by organizing, for example, the maintenance management and implementing lean philosophies [12]. Due to the fact that the production management influences the system performance indirectly, it is very difficult to estimate costs and process reliabilities as well as product qualities. Nevertheless, there is a need to integrate such factors to production system design. For this reason, Hassan et al. developed a selection process of design scenarios regarding cost and quality [9]. Based on a given product design and an aspired process chain, some methods of quality management (QFD, FMEA, etc.) and costing are applied in order to estimate manufacturing costs, quality failures, and quality costs (Figure 2).
Selection process of design scenarios regarding cost and quality [9].
Next to cost and quality, various key performance indicators (KPI) exist, which have to be measured and which can include uncertainties. Hon presents a study which considers cost performance and quality performance measures as well as time, flexibility, and productivity performance measures [15]. Thereby, the overall lead time is one of the most relevant KPI, which exists for evaluation 9 of manufacturing and production systems. In process planning the estimation of an overall lead time is very difficult because of high impacts due to production management, like, production planning and control strategies [16].
3. Model-Driven Logistics Engineering by Use of GRAMOSA
The production system design is faced with numerous challenges that necessitate a detailed depiction of the production processes and material flows in order to ensure the proper communication of planning content [17]. Thereby, conceptual models can help to collect and structure the data by graphical modeling. The objective of model-driven logistics engineering is to transform automatically such conceptual models of production systems into executable simulation models (Figure 3). This would be beneficial due to the fact that manual model transformation costs a lot of time and is source for transformation errors. Therefore, automated model generation is one of the main issues in context of digital factory. It has already been discussed in scientific communities over a few years [18–20].
Automatic generation of simulation models from factory data models.
Despite promising scientific applications and prototypes, the automated generation of models has not yet been able to prevail in an industrial context [21]. Thereby, the main issues are the incomplete semantics of general purpose modeling languages (GPMLs). Sometimes, the description of domain specific semantics by use of general purpose modeling languages, like, UML, is too complex or just impossible. Therefore, domain-specific modeling languages (DSMLs) can be developed, which are modeling languages whose purpose is to represent concepts efficiently from a particular domain, like, financial services, production, and logistics [22]. The application of DSMLs means to simplify the use and to increase the model accuracy. Key elements, semantics, and constraints of the domain are defined precisely in the metamodel and can be used by domain experts to express the system behavior more intuitively [23]. At the following, the GRAMOSA modeling concept is presented, which contains a domain-specific modeling approach in order to describe complex production processes and systems [24].
3.1. Material Flow Oriented Process Modeling
The idea of the GRAMOSA modeling concept is to realize a process modeling approach, which represents control flows as well as material flows. Additionally, the process control shifts from process sequences to process steps. Encompassed by the integrated modeling of control and material flow, this will allow us to model production processes and systems very precisely. The modeling concept GRAMOSA uses four basic functions in order to control order/batch generation, order release, dispatching, and routing. The idea is to integrate all four control functions into the modeling concept. This is realized by adding these functions primarily to the trigger and order object (Figure 4).
Metamodel of material flow oriented process modeling concept.
The trigger has different activation rules, which are related to the activation event. In the case of a process-driven activation, the order trigger is connected to a process unit and different process events (start, finish, etc.) can be used for the activation (Figure 5). In a time-driven activation the trigger is connected to the time releaser. In a stock-driven activation, the order activator is connected to a buffer and several different rules can be formulated for the activation on the bases of minimum and maximum stocks. Additionally, the material flow condition can be specified by the connection with a material flow object. Thus, for example, in the case of mixed buffers, signals can be defined for certain material flow objects. After activation, the selection rule is processed. The selection rules define how the routing decision is made, while the process call rule defines how many process calls are executed. Amongst other things, the order object defines whether the process calls should be grouped into a batch or processed individually. As mentioned before, the order “dispatching” is realized by setting the dispatching rule for the organization unit. With the use of basic control functions, it is possible to implement the well-known control strategies, such as Conwip and Kanban.
Example of material flow oriented process modeling.
GRAMOSA uses symbols from UML-class diagrams in order to apply regular UML tools for editing, but the syntax is completely new. GRAMOSA, in particular, is characterized by the use of fixed connection sequences. Concerning the material flow, the sequence is as follows: buffer (input), material flow object (input), process, material flow object (output), and buffer (output). This means that material flow objects must not exist without connection to the buffer and the process. The same applies to control flow. Activator element, trigger, order, and process are a fixed element connection sequence. Thereby, the trigger can have more than one order to realize routing decisions.
3.2. Description of the Software Concept
The software concept makes use of a central database solution for the management of all modeling information in MS Access. An MS Access integrated graphic user interface enables the user to manage planning scenarios and carry out modeling via a tree structure. The yEd Graph Editor is used for the graphic model representation: the model view can be exported from the MS Access application and shown in the yEd Graph Editor by use of GraphML-Format (Figure 6).
GRAMOSA software concept and prototypical user interface.
The GraphML-Format is a free file format based on XML, which offers a platform independent representation of graphs. The model structure can be analyzed directly in MS Access. A static dimensioning of the production concept can be achieved by exporting the manufacturing concept to MS Excel. The interface between MS Access and Tecnomatix Plant Simulation is implemented through prepared text tables. In principle, implementation solutions are conceivable that directly access the MS Access database from the simulation environment via ODBC. However, due to the complex database structure and elaborate filter operations for the scenario selection, this approach was given up. It can be implemented better in MS Access. In addition, the prepared text tables can be used as input data for other simulations. In order to realize fully automatic model generation, the structure of the simulation environment is individually programmed. The actual simulation model generation takes place in Tecnomatix Plant Simulation and is entirely automatic. Manual interventions are only necessary when new process and control logics are added and they thus need to be newly implemented. In the simulation environment, the strict separation of control and material flow is noticeable. The order control is responsible for observing the production system and releasing the order by obeying the release rule. The calculation of key performance indicators, like, for example, lead times and costs, is implemented in order to evaluate different parameter and resource settings.
3.3. Sample Use Case: Metalworking Process by Consideration of Rework
In order to show the feasibility of the integrated modeling and simulation concept, a metalworking process is used as a design example of a production system. Applied as a flow production of a single product, the manufacturing process is represented in four stages (Figure 7).
Material flow scheme of metalworking process by consideration of rework.
The process begins with casting and milling, while the third stage is the quality inspection. The quality inspection has the option to send faulty parts back to the milling unit again. The parts that qualify are packed and sent to the shipping buffer. Table 1 shows the process parameters for three different development cases (best/normal/worst). The development cases follow the idea of estimated process parameters, which are determined by a domain expert. The domain expert determines the three different states of the process parameters and their probability of occurrence.
Process parameters and the probability of occurrence in different development cases.
Process description
Parameters
Probability of occurrence (%)
Processing time (min)
Failure rate (%)
Costs (€/h)
Casting
100
(8/10/15)
350
(25/50/25)
Milling
30
0
(300/400/500)
(15/65/20)
Quality inspection
(20/40/60)
0
200
(15/80/5)
Packing
5
0
50
—
Rework (milling)
10
0
400
—
By use of the process parameter, a discrete event simulation was run. The simulation took 2000 hours and 1100 orders were released. The model and the simulation experiment were created in GRAMOSA and transferred to the discrete event simulation environment. Three parameters with three different states were changed, which makes 27 possible permutations. The repetitions of each scenario were three runs, which can be noted in Figure 8.
Simulation results.
4. Risk-Based Allocation of Development Budget
Based on the simulation results, a first statistical analysis can be made. It shows that the mean costs per order will amount to 1398,05 € (Figure 9). The following approach tries to optimize the allocation of the development budget in order to improve the mean value of costs per order.
Statistical analysis of uncertainties in production system design.
The approach is based on the idea that the occurrence of best, normal, and worst case is not completely random. A specific management of development activities allows for shifting probabilities from worst to normal and from normal to best case. For example, the failure rate can be reduced by installation of a better SPC. The costs per hour will be reduced, if the process planner finds a cheaper vendor for the machine. The time for quality inspection will equally be reduced, if the work place is designed more economically. All this requires more time of the production system designer, which can be provided due to development budget.
4.1. Problem Formulation
Parameters
P: Set of parameters, where n=|P|
i: Index of the parameter i∈[1,n]
C: Set of cases, where m=|C| (a case can be worst case, normal, and best case)
j: Index of case j∈[1,m]
fi: Impact changes factor of parameter i, where fi can either be positive or negative
Probijn: Probability occurrence of parameter i in case j in initial state
Maxi: Maximum limit of change allowed in % to the probability occurrence of parameter i
Costi: Modification costs for each percent change to the probability occurrence of parameter i
Expsk: Expected value of scenario sk
DBudget: The total development budget.
Variables
Xi: Change incurred into the probability occurrence of parameter i
Probijo: Probability occurrence of parameter i in case j in optimal state, which represents the positive or negative impact of the change Xi of the initial probability occurrence Probijn. Probijo=Probijnfi·Xi
Ω: Set of scenarios, where S=|Ω| and S=ij. Ω represent all possible combination of different Probijo
sk: Index of scenario of Ω and k∈[1,S], where sk is an i-tuple, which denotes a possible combination of Probijo∀i∈I and ∀j∈J. An example for sk is (Prob1ko,Prob2ko,…,Probiko), and therefore there are ij possible combinations
P(sk): Probability of scenario sk, where P(sk)∏i=1nski.
Objective. The objective function is to minimize the mean value of costs per order. (1)min∑k=1SP(sk)·Expsk.
Constraints. The objective function is subject to the following constraints:
(2)∀i∈IXi≥0,(3)∀i∈IXi≤Maxi,(4)∀i∈I∑j=1mProbijo=1,(5)∀i∈I∑i=1nXi·Costi≤DBudget.
Equation (2) ensures that the change to be incurred to the probability occurrence of parameter i is positive and integer. Equation (3) guarantees that this change should not exceed a maximum value of change allowed in % to the probability occurrence of parameter i. Equation (4) indicates that the sum of the optimized probability occurrence of parameter i in all cases C is equal to 1 (100%). Equation (5) restricts the optimized cost to be less than the total cost.
4.2. Experiment
The experiment is run by a development budget DBudget of 175000 €. The modification costs Cost1 of the casting failure rate are 2000 € per percent, while the modification costs Cost2 of the milling costs are 6000 € per percent. The modification costs Cost3 of the quality inspection processing time are 3000 € per percent. Table 2 shows the results of the optimized allocation of the development budget.
Optimized allocation development budget.
Process parameters
Initial cases
Optimized cases
Development costs
Worst case
Normal
Best case
Worst case
Normal
Best case
Casting failure rate
25%
50%
25%
0%
25%
75%
100.000
Milling costs
15%
65%
20%
9%
59%
32%
72.000
Quality inspection processing time
15%
80%
5%
15%
80%
6%
3.000
The statistical analysis of the optimized production development process shows mean costs of 1324,11 € per order (Figure 10), which is nearly 74 € less than that without the optimization.
Statistical analysis by risk-optimized allocation of development budget.
5. Conclusion
New and existing production technologies are often not completely adoptable to new products. For this reason some of the main characteristics, like cost, time, or quality, have to be estimated at the beginning of process planning and production system development. In general, the estimations can be categorized into different probable cases, like best, normal, and worst case. These uncertainties can be considered in further production system design. In this paper the modeling concept GRAMOSA is applied and used for integrated planning and simulation in context of model driven logistics engineering. The simulations results are used and analyzed for the optimization of development risks in production system design. Thereby, a mathematical optimization problem is formulated, which seeks to minimize the mean costs per order by consideration of different uncertainties. The experiment shows promising results in regard to risk-optimized allocation of the development budget. To give an outlook, the approach will be extended to the performance measures of flexibility and productivity. Flexibility and productivity are important for production system design and are influenced by management actions. This is why they are promising factors for the presented approach of risk-optimized design of production systems.
Conflict of Interests
The authors declare that there is no conflict of interests regarding the publication of this paper.
RiedelR.JentschD.HorbachS.AckermannJ.MüllerE.Agile planning processes2013414143150IFIP Advances in Information and Communication Technology10.1007/978-3-642-41266-0_18DashkovskiyS.KarimiH. R.KosmykovM.Stability analysis of logistics networks with time-delays201324756757410.1080/09537287.2012.659867WiendahlH.-P.ElMaraghyH. A.NyhuisP.ZähM. F.WiendahlH.-H.DuffieN.BriekeM.Changeable manufacturing—classification, design and operation20075627838092-s2.0-3425086974410.1016/j.cirp.2007.10.003MehrsaiH.KarimiR.Scholz-ReiterB.Application of learning pallets for real-time scheduling by the use of radial basis function network20131018293Scholz-ReiterB.LütjenM.MoscaR.Modeling and evaluation of alternative production scenarios in the field of composite manufacturingProceedings of the 20th European Modeling & Simulation Symposium2008Campora S. Giovanni, ItalyDIPTEM Universita di Genova174179SchenkM.WirthS.MüllerE.2010Berlin, GermanySpringerLauderM.SchlerethM.RoseS.SchürrA.Model-driven systems engineering: state-of-the-art and research challenges20105834094212-s2.0-7975148550410.2478/v10175-010-0039-xMünsterC.2004Technische Universität BrandenburgHassanA.SiadatA.DantanJ.-Y.MartinP.Conceptual process planning an improvement approach using QFD, FMEA, and ABC methods20102643924012-s2.0-7795565971110.1016/j.rcim.2009.12.002BellgranM.SäfstenE. K.2010Berlin, GermanySpringerWeigS.2008TU MünchenInmanR. R.BlumenfeldD. E.HuangN.LiJ.LiJ.Survey of recent advances on the interface between production system design and quality201345655757410.1080/0740817X.2012.757680KostinA. M.Guillén-GosálbezG.MeleF. D.BagajewiczM. J.JiménezL.Design and planning of infrastructures for bioethanol and sugar production under demand uncertainty20129033593762-s2.0-8485745083310.1016/j.cherd.2011.07.013HeilalaJ.VatanenS.TonteriH.MontonenJ.LindS.JohanssonB.StahreJ.Simulation-based sustainable manufacturing system designProceedings of the Winter Simulation Conference (WSC '08)2008Miami, Fla, USA19221930HonK. K. B.Performance and evaluation of manufacturing systems200554213915410.1016/S0007-8506(07)60023-7DashkovskiyS.KarimiH. R.KosmykovM.A Lyapunov-Razumikhin approach for stability analysis of logistics networks with time-delays20124358458532-s2.0-8485817649310.1080/00207721.2010.528179MR2892874Scholz-ReiterB.LütjenM.Production process engineering—modelling and evaluation of process chains for composite manufacturingProceedings of the International Conference on Applied Production Technology, Production of Aircraft Structures (APT '07)2007Bremen, GermanyBIAS4351BergmannS.StrassburgerS.Challenges for the automatic generation of simulation models for production systemsProceedings of the Summer Simulation Multiconference (SummerSim ’10)July 2010Ottawa, Canada545549HorbachS.Implications of interoperability for factory planning2013379387Lecture Notes in Mechanical EngineeringMuellerR.2007Georgia Institute of TechnologyStraßburgerS.BergmannS.Müller-SommerH.ZülchG.StockP.Modellgenerierung im kontext der digitalen fabrik—stand der technik und herausforderungenProceedings der 14 ASIM-Fachtagung Simulation in Produktion und Logistik2010Karlsruhe, GermanyKIT Scientific Publishing3744MontrieuxL.YuY.WermelingerM.Issues in representing domain-specific concerns in model- driven engineeringProceedings of the Workshop on Modeling in Software Engineering (ICSE '13)May 2013San Francisco, CA, USA1819SchmidtD. C.Guest editor’s introduction: model-driven engineering20063922531LütjenM.University of Bremen2014, http://nbn-resolving.de/urn:nbn:de:gbv:46-00103681-13