An Associate Rules Mining Algorithm Based on Artificial Immune Network for SAR Image Segmentation

. As a computational intelligence method, artificial immune network (AIN) algorithm has been widely applied to pattern recognition and data classification. In the existing artificial immune network algorithms, the calculating affinity for classifying is based on calculating a certain distance, which may lead to some unsatisfactory results in dealing with data with nominal attributes. To overcome the shortcoming, the association rules are introduced into AIN algorithm, and we propose a new classification algorithm an associate rules mining algorithm based on artificial immune network (ARM-AIN). The new method uses the association rules to represent immune cells and mine the best association rules rather than searching optimal clustering centers. The proposed algorithm has been extensively compared with artificial immune network classification (AINC) algorithm, artificial immune network classification algorithm based on self-adaptive PSO (SPSO-AINC), and PSO-AINC over several large-scale data sets, target recognition of remote sensing image, and segmentation of three different SAR images. The result of experiment indicates the superiority of ARM-AIN in classification accuracy and running time.


Introduction
In data mining field, classification is one of the most important issues which have a wide range of applications.The aim of classification can be defined to classify an object into a predetermined group or a category according to some features observed in itself.In recent years, many classification methods have been widely applied to pattern recognition, machine learning, data mining, and artificial intelligence.So far, a large number of classification algorithms have been proposed, including the -nearest neighbor (KNN) algorithm, Bayesian classification, Fuzzy -means (FCM), decision tree method, and BP neural network algorithm.However, these traditional methods have their drawbacks in dealing with classification problems.Therefore, new methods have been proposed in recent years, and one of the most successful methods is artificial immune classification system inspired by biological immune system.
Artificial immune network has a large number of applications since it was developed.In 1996, the Cooke net [1] was proposed by Hunt and Cooke.They used the net in DNA sequence for pattern recognition.The Multiple-Valued Immune Network (MVIN) [2] proposed by Tang et al. not only simulates the B cells but also makes use of the auxiliary and inhibition of T cells.The main idea in this model is the simulation of the interreaction and regulation between B cell and T cell with a learning mechanism of a multivalue feature set.Then the evolutionary immune network was first employed in data analysis [3] by de Castro and von Zuben.As a simulation of the antibody cloning and selection process in biological immune system, the method regards the data set as the antigen set and generates the output as the antibody set.By the analysis of the simulation results, we find that although the algorithm is hard to determine the number of clusters, even in the case of knowing the number of clusters which may deviate from the correct cluster center, the algorithm can greatly reduce the data redundancy, and the resultant antibody set can reflect the structural features of the data set.In 2001, they proposed a new model, aiNet [4].The model differs from Hunt-coke mostly in the absence of consideration of the concept of stimulation and the model only considers the affinity.To obtain the data pattern, some stages of the training process are driven by clonal selection, and some remove redundancy through the interaction of antibody.In 2012, a segmentation algorithm which is based on the negative selection mechanism of the artificial immune system was proposed in [5].Experiments show that the algorithm has a good performance on the segmentation threshold subjectively.Recently, Fu et al. proposed a coordinated immune network template algorithm [6], and it added a coordination mechanism between innate immunity and adaptive immunity in order to extract targets from blurred infrared images.More recently, an image segmentation method for blurred trace infrared images was proposed in [7], which was considered the function of immune factors for blurred infrared image segmentation.The simulation results show that this method can improve the target segmentation rate and reduce the segmentation error rate.Resource Limited Artificial Immune System (RLAIS) developed by Timmis and Neal uses Artificial Recognition Ball (ARB) to represent classified cells.All of the ARBs compete with each other based on the incentive level to which they are subjected.The higher the incentive level of ARB is, the more B cells it can represent, and one ARB may be pruned away from the network for its incapacity of standing for any of the B cells.For its good control over the population size, Watkins and Timmis made a series of improvements of this algorithm [8][9][10], and de Castro and von Zuben proposed Self-Stabilizing Artificial Immune System (SSAIS) [11] on the basis of RLAIS for continuous analysis of time-varying data.Nevertheless, SSAIS differs from RLAIS quietly in the case of no supply of the resource constraints level, and each ARB in it can control resource on its own level (decentralized control).Moreover, SSAIS computes the stimulation level without the consideration of the inhibition among B cells.Later, an improving version of SSAIS called Metastable Memory Immune Network (MSMIN) emerged.The algorithm, which clings to the idea of AINE, is applied to data analysis, clustering, and artificial immune memory.More recently, artificial immune network has turned out to be a hot research area, which is proved by the stably growing number of related conferences and journal articles [12][13][14][15][16][17][18][19].
Existing artificial immune network classification algorithms are used to find the affinity of immune cells through the calculation of the distance, which determines the classification result far from ideal when the characteristics of the data to be classified are nominal characteristic value.Since the algorithm is a supervised search for the best cluster center, it is more difficult to deal with high-class classification problems.The convergence time of the algorithm is not linearly related to the number of classification categories; with the increase of number of classification categories, the time of calculation increases, while the accuracy of classification decreases.When the number of classification categories grows to a certain extent, the algorithm will result in an incapable classification (the classification result is poor or the calculation time is too long).In order to make the algorithm more versatile and robust, we made some improvements on the basis of the new artificial immune network algorithm [12] and introduced the association rules.Association rules have developed a good application in data mining algorithms.Do et al. [20] implemented a favorable combination between associated classification and artificial immune system clonal selection algorithm, which lead to a new classification algorithm called artificial immune system-associative classification (AIS-AC), and the method had advantage over the traditional association rules classification methods in running time and classification performance.Inspired by this, we introduced the associate rules into the artificial immune network and improved the associate rules mining algorithm based on artificial immune network (AIN-ARM) for large-scale data, remote sensing image, and SAR image classification.

Background
2.1.Idiotype Immune Network Theory.Following Bernet's clonal selection theory, in 1974, Jerne proposed the idiotype and anti-idiotype of immune system internal regulation of the idiotype immune network theory.For his research work in this area, he won the Nobel Prize in 1984.Idiotype immune network theory suggests that, before the stimulation of the body from antigens, it is still in a relatively stable statement; on the entrance of antigens, it destroys the balance and results in the generation of the specific antibody molecules.Once the number of the molecules reaches a fixed value, the idiotypic immune response of the anti-immunoglobulin molecules takes place; namely, the anti-idiotypic antibody are produced.Therefore, the antibody molecules can be identified by their anti-idiotype antibody molecules just as they recognize antigens.This view is accepted whether by the antibody molecules in the blood or the immunoglobulin (Ig) molecules which act as the antigen receptors on the surface of lymphocytes.In the same animal's antibody molecules, a set of idiotypic determinants on the antibody molecules of one animal's body can be identified by another group of anti-idiotype antibody molecules, which is the same as a set of antigen receptor molecules on the surface of the lymphocytes that can be recognized by another group of antiidiotype antibody molecules on the surface of lymphocytes.In this way, a network structure consisting of lymphocytes and antibody molecules is formed in the body.The network theory states that the production of this type of anti-idiotype antibody plays an important role in the regulation of immune response for the clones proliferated by antigen stimulation to be inhibited rather than endlessly proliferated and for a stable balance of the immune response to be maintained.

Associate Rule.
Let  = { 1 ,  2 , . . .,   } be a set of data items,  is a set of transaction data (called transaction database), each transaction  of  is a subset of data items of , that is,  ⊆ ; each transaction  has a unique identification number called TID.Let  be a set of data items, if and only if  ⊆ , being called transaction  contains .An association rule is shaped like an " => " implication, where  ⊆ ,  ⊆ , and  ∩  = ⌀.The associate rule  =>  can be described in the following parameters: Here the sup is the percentage of transactions in  which contains both  and .As a measurement of the importance of the association rules, sup explains how much the representative value of this association is.The higher the support is, the more important the association rules are.If item set meet the minimum support, then call it the frequent item set.Conf refers to the percentage of transactions in  consisting of  as well as , and, as the measurement of accuracy of association rules, it reflects the posterior probability of the occurrence of  subject to the premise of a given .

The Proposed Algorithm
Based on the biological immune network model and the associated classification, we proposed a new classification algorithm, an associate rules mining algorithm based on artificial immune network (AIN-ARM); the algorithm used the association rules to represent the memory cells of artificial immune network, and it also used mining association rules as a replacement of the search of the existing artificial immune network algorithm for the best cluster center.The algorithm has strong robustness and versatility and a convergence time which is linearly proportional to the classification categories, so the problem that the number of the classification categories is too high to classify is nonexistent.The immune academic language that the algorithm refers to and its meaning in this algorithm are presented as follows: (i) Immune cell: the associate rule.
(ii) Memory cell: the association rules which are selected for the final classification.
(iii) Antigen :  is defined as the training samples which is carried in the artificial immune network algorithm, denoted by  = ( 1 ,  2 , . . .,   ), and   is the th collection of training samples.
(iv) Clone size:   represents the size of immune cell proliferation.The number of clone is proportional to the affinity value, if the affinity value of the th immunocyte is denoted by affinity(), and the number of clone is affinity() *   .
(v) Mutation rate: in this paper,   is the mutation probability of each cloning individual.
(vi) Affinity value: affinity value indicates the matching degree of the immune cell to the antigen and is represented as affinity.In this algorithm, the affinity is the confidence value.
(vii) Minimum support: it is a threshold condition to distinguish whether a rule is a frequent rule or not and denoted by minsupport.Let the support of the th rule be support(), if and only if support() >= minsupport, and the rule is useful.
(viii) Minimum confidence: it is denoted by minconfidence.
If and only if a frequent rule meets the minconfidence, that is, confidence() >= minconfidence (where the confidence() denotes the rule's confidence value), the rule is called association rule.
This section first presents the key technologies in the algorithm in detail, including data preprocessing, network initialization, antibody affinity function, hypermutation, pruning operations, suppression of the immune network operation, and classified operation, and the steps of the algorithm are given in the end.

Data Preprocessing.
Of the input data, the continuous features should be discretized.Data can be preprocessed according to Here,  means the input data to be processed; min () and max () represent, respectively, the minimum and maximum of a column to which a continuous feature data belongs. is the range size of data discretization, which represents the right rounding.

Network Initialization.
Immune network initialization includes the generation of the candidate rule set, the initialized population of immune cells, and the weight vector of .The rules candidate set contains all the association rules which have a length of 2 and is similar to "  =>   " (here,   represents a characteristic value of a certain dimension;   is the category property value).Immune cells initialization includes that some association rules are selected randomly as the initial immune cells from the candidate rule set to the network.Set the initial confidence value of each immune cell for the value of its initial weight vector, and weight vector has the following functions: (1) When the network is suppressed, it promotes the retention of high-quality memory cells.(2) When it is classified, it is used to evaluate the value of membership grade between the test samples and the memory cells.

Function of Antibody Affinity.
The affinity value of this algorithm is the value of confidence.We assume that an immune cell   such as  1 ∧  2 ∧ ⋅ ⋅ ⋅ ∧   =>   , then the affinity value is calculated as where sup() represents the obtaining of the support value of , which is the occurrence probability of event .
3.1.4.Super Variation.Since association rules are unique, the variation mentioned by this algorithm only acts on a certain position of immune cells (change the value of the position or add a new value to the position); the new value is chosen from the candidate rules set randomly, so it guarantees that the new value meets the minimum support value and minimum confidence value.Once the offspring has different values on two or more positions with the parent, the two rules would generally be irrelevant, and then the offspring would lose the inheritance of the parent.The mutation probability (  ) is positively related to the immune cell affinity.
3.1.5.Pruning Operation.In the process of evolutionary search, it will produce a lot of redundant rules.To improve the efficiency of this algorithm, these rules should be deleted.
The cancel rules include: duplicate rule sets, long rules with a low confidence value, and rules contained in the memory cells of immune networks.

Suppression Operation of the Immune Network.
To improve the efficiency of the algorithm, it is necessary to eliminate parts of the memory cells with the elite selection principle.The elimination is obtained by mutual inhibition among memory cells.The network suppression rule is that the memory cell  is eliminated when it is contained in the memory cell  ( ⊆ ), when and only when the weight vector corresponded with  is not greater than that with  (  ≤   ).
3.1.7.Classification Operation.Associated classification algorithms generally use maximum degree of confidence as the basis for classification.It means that, while in the classification process, a test sample should travel through all the association rules and choose all the rules which are capable of covering the test sample, and then the sample belongs to the category which has the rule with the largest confidence value.This classification approach combines the training and classification process of association rules well together.However, direct application of this algorithm may produce the problem that some samples fail to be classified (because only some relatively good association rules can be chosen as the memory cells).Therefore, classification rules of the algorithm are set as where  is the degree of membership between  and ,  represents memory cells,  is its length,  is its weight value (that is, confidence value),  means the test sample,  is the largest length of memory cell,  indicates the dispersion,  is the number of the same features between  and , and distance expresses the difference between the two features.The flowchart of the proposed algorithm is shown in Algorithm 1.

Experimental Results and Analysis
In order to verify the effectiveness of the proposed ARM-AIN, the performance of the ARM-AIN is compared with other four state-of-the-art methods.They are artificial immune network classification algorithm (AINC), artificial immune network classification algorithm based on Self-adaptive Particle Swarm Optimization (SPSO-AINC) and artificial immune network classification algorithm based on Particle Swarm Optimization (PSO-AINC) and K-NN (KNN) algorithm.
The experiments include three parts.In the first part, we test the performance of all compared algorithms with four data sets with large size.In the second part, five algorithms are applied to a target recognition problem of remote sensing image.In the third section, we apply five algorithms to segment three synthetic aperture radar (SAR) images.In all experiments, we have taken 50 independent runs (with different seeds of the random number generator) of each algorithm.
The encoding mechanism in AIN-ARM is modified on the basis of an artificial immune network classification (AINC) algorithm, and each immune cell includes all the category information in the antigen; therefore the proposed algorithm is more suitable for dealing with data sets with large number of categories.In SPSO-AINC, an adaptive weight is introduced to the AINC mutation operator, which is specified as follows: ( In which,  is the adaptive weight, MC represents the immune cells before variation, MC  means the immune cells after variation, train(, ) expresses the -dimension elements of training sampler randomly selected with the same category in the mutation fragments, MC indicates the group cloned,  is the fitness value, the global extreme  represents the individual with the highest affinity degree, MC(, ) means the -dimensional elements of the th individual selected, and  1 and  2 represent learning parameters of which the sum is 1.
In PSO-AINC, a basic PSO mutation is adopted; other one is similar to that of AINC.
Step 1. Read and preprocess (discrete the continuous feature) the data.
Step 2. Set the minimum support and confidence (minSupport, minConfidence), maximum rule length max long, clone size   , mutation probability   and so forth; meanwhile initialize immune network net M, weight vector , set the initial value of  to 1,  ≤  ( is the number of categories of data).
Step 3. Network evolution 3.1: Generate candidate rule set candidatei of the th training samples, (which contains all the rules that have a length of 2, meets the minimum support value rule), and choose a certain amount of rules with the highest confidence value from candidates as the initial immune cells to be added into   , set the number of iterations: iteration = 0, coverage: coverage = 0, the number of generation with stable coverage: no change = 0; Main parameters employed in these algorithms are set as follows.
AIN-ARM.Mutation probability   = 0.8, clone size   = 10, the maximum number of iterations is 50, the range of the minimum support minsupport is (0.001, 0.1), and the initial minimum confidence minconfidence is 1.
SPAINC.Mutation probability   = 0.8, clone size   = 10, the maximum number of iterations is 100, and the stop condition is that the affinity of the best individual is 1 or as follows.
AINC.The parameter setting is the same with SPAINC.
The stop condition is set that the total coverage of training samples of the category reaches 100%, or it is not changed within 10 generations.
All the algorithms discussed here have been developed in a Matlab7.0.1 platform on a Pentium-IV 2.33-GHz PC, with a 2-GB main memory in Windows Server 2003 environment.

Experimental Results on Large-Scale Standard Data Sets.
The properties of the test data sets including Letter, Nursery, Adult, and Digit [21]  As shown in Table 2, for Letter, it has a large category number (26), so there is a great difference in classification results.AIN-ARM increases by 15% compared to SPSO-AINC, and it requires the least running time compared to other methods.Since the category number of Nursery is 5 and all of its features are nominal, ARM-AIN increases by approximately four times in running times compared with SPSO-AINS and obtains 35.3% higher classification accuracy than SPSO-AINS and it is best among five algorithms.We can see ARM-AIN has a slight improvement in Adult in terms of classification accuracy compared with other four algorithms.For Adult, we can see the proposed algorithm is still best whether in classification accuracy or running time; however, the improvement is not very obvious; the reason is that Adult has two categories.For Digit with a relatively larger classification category number, ARM-AIN gets an obvious improvement in classification accuracy and running time compared with other algorithms.Since it is widely used that the seven constant features of two-dimensional images have the features of rotation, translation, and scale invariance, the algorithm still extracts seven invariant moments as the classification features [20].
Two-dimensional image (, ) has a ( + ) central moment: where  and  represent the average value of the horizontal and the vertical coordinates of all pixels in the images and (, ) expresses the gray value of the pixel located in (, ).
In this case, seven constant moments  1 - 7 based on second-and third-order central moments are shown as To obtain the scale invariance, equation needs to be handled as follows, where  is the number of pixels contained in the target  = ( 20 +  02 ): classification results of remote sensing image are shown in Table 3.We can see that ARM-AIN is better in all three measures than SPSO-AINC.The former increases by 2.1% compared with the latter in classification accuracy.Its standard deviation also decreases by 2.1, which means ARM-AIN performs more stably.The two algorithms are far different in training time: AIN-ARM takes no more than 11 s, yet SPAINC takes about 1760 s.The proposed algorithm is far better than other three algorithms in terms of average classification accuracy and running times over 50 independent runs.For the good characteristics performed in texture features analysis of the statistic amount based on GLCM and the wavelet transformation, this study extracts 4-dimensional characteristics [22] based on GLCM, respectively, which are called angle second-order moment (energy), contrast, entropy and correlation, and seven-dimensional features in which there are two-layer wavelet extract energy of offspring.Therefore, what the algorithms deal with is 11-dimensional texture feature value of two-layers wavelets transforming and GLCM.
The first image is an X-band SAR subimage of a Swiss lake, its size being 140 × 155, as shown in Figure 2(a), which contains three types of ground objects: lakes, city, and mountains.Various types of representative areas are selected as training samples, which are 200, 100, and 200, respectively.We get the test samples of lake, city, and mountains, respectively, as 225, 121, and 300.Both of the sliding window sizes of GLCM and wavelet are 7. Figures 2(b), 2(c), and 2(d) are classification results of four algorithms, respectively.
As seen from Figure 2, all of the algorithms can basically achieve correct classification of the lake and the city, and the overall classification result of ARM-AIN is better compared to other algorithms.AINC, SPSO-AINC, and PSO-AINC misclassify more pixel points which belong to the mountain.Moreover, ARM-AIN has more obvious superiority in running time which takes only 5.98 s while AINC and SPAINC take 41.65 s and 22.13 s, respectively.Table 4 presents confusion matrix obtained by the five algorithms, and Table 5 gives average classification accuracy and kappa coefficient of the five algorithms, which indicates that AIN-ARM is best among five algorithms and, especially, it increases by 0.3% and 1.6%, respectively, compared with SPSO-AINC and AINC in classification accuracy and increase by 0.005 and 0.0239, respectively, in the Kappa coefficient.
The size of the second SAR image is 256 × 256, which contains four ground objects: river and three kinds of crops.It can be seen from Figure 3(a) that the number selected as training samples of water, white, gray, and light crop is 100, 100, 200, and 200, respectively.GLCM and wavelet sliding window sizes are set as 5 and 13, respectively.Figures 3(b Figure 3 shows that ARM-AIN remains better than other three algorithms in the edge areas with four crosscutting   As shown in Tables 6 and 7, ARM-AIN increases by 4.4%, 4.2%, and 7.6% in average classification accuracy compared with SPSO-AINC, AINC, and PSO-AINC, respectively.Whether from the view of classification accuracy or kappa coefficient, the proposed algorithm is superior to the other three algorithms.
The size of the third SAR image is 256 × 256, which includes four kinds of surface features: water, urban, and two crops.Referring to Figure 4  It can be seen from the classification results in Figure 4 that ARM-AIN has obvious advantage over SPSO-AINC, PSO-AINC, and AINC in the results of water, and the latter misclassified more pixels of the water to the dark crops.For both crops, the classification results of ARM-AIN are most ideal, SPSO-AINC misclassified more pixels of light crops to the dark crops, and ANIC is opposite.Overall, the classification results of ARM-AIN are best.For running time, the consumption time of AIN-ARM, AINC, and SPAINC is 15.25 s, 237.23 s, and 188.92 s, respectively, and the first one has a time less than one-tenth of the latter two.It can be seen clearly that ARM-AIN plays a notable role in convergence rate.As can be seen from Tables 8 and 9, ARM-AIN obtained higher average classification accuracy than SPSO-AINC, PSO-AINC, and AINC, respectively.

Noise Sensitivity of the Proposed Method.
In order to discuss the noise sensitivity of the proposed algorithm, we take the first SAR image as an example and add two kinds of noise, that is, Gaussian noise and salt noise, into the original SAR image then adopt the proposed algorithm to segment the image with noise.The noise parameters are set as 0.02, 0.05, and 0.1, respectively, and Figures 5 and 6 show the results of classification.
As shown in Figure 7, with the parameter value increasing, the classification accuracy decreases; compared to the Gaussian noise, Salt noise makes the classification results worse, due to Gaussian noise having an evenly distribuation in the image, which is also proved by the classification accuracy provided in Table 10.

Analysis of Algorithm Parameters.
There are five main parameters used in the proposed algorithm, that is, unchanged, the greater the size of the antigen population and proportion of clone are, the better the population diversity is, which is at the expense of the algorithm's time complexity.Minimum confidence of the confidence of the algorithm is adaptive; it will gradually reduce with the number of iterations increasing, so the minimum confidence level has little effect on the algorithm, and the initial value can be set to 1.For the mutation probability   , in the general immune algorithm, it always has a great impact on the performance of the algorithm; however, the unique mutation operator and pruning operations in the ARM-AIN algorithm cause   a little impact on the performance of the algorithm; while it only concerns the convergence time of the algorithm, the larger mutation probability can lead to a faster convergence rate, and in this paper we set   = 0.8.
The main consideration in the algorithm design is the effect of parameter minsupport on the performance.The size of the minimum support is related to the number of the frequent rules to be searched; the smaller the value of the minsupport is, the more the frequent the rules are; the greater the searching space is, the right higher the classification accuracy of the algorithm is; however, when the minsupport reduces to some extent and confronts the problem of frequent rule explosion, the convergence time becomes unacceptable too.To sum up, the reasonable range of minsupport is from 0.01 to 0.1.Here we use the data of Digit as the example and sample the parameter minsupport in the range from 0.01 to 0.11 with the step size 0.01 and examine the effect of the classification accuracy.The results are shown in Figure 7.

Conclusion
Based on the biological immune network theory and associated classification, we proposed an association rules mining algorithm based on artificial immune network (ARM-AIN), and the proposed algorithm is applied to large-scale data mining, target recognition of remote sensing image, and classification of SAR images.The algorithm can solve multiclass or nominal-attribute classification problem which cannot be solved well by most of existed immune network classification algorithms.Moreover, AIN-ARM is superior in the results of SAR image classification to SPSO-AINC and AINC and particularly dominates in the convergence rate.Consequently, all the above illustrate the algorithm plays a good role in its versatility and robustness.

4. 2 .
Target Recognition of Remote Sensing Image.In this section, we apply five methods to solve target recognition of remote sensing image.Experimental images are real measured remote sensing images.Each contains only the target and background.The entire images set are 1064 pieces of images which have a variety of targets with different rotating angles, scales, and incomplete parts.Their basic condition are aircraft class 608 and ship class 456, and parts of images are shown in Figure 1; aircraft training takes 160 samples as training data set, we extract 120 from ship data sets as training samples, and the rest ones are used for testing.

Figure 1 :
Figure 1: Parts of remote sensing images.
)-3(d) are separately classification results of four algorithms.

Figure 2 :
Figure 2: Classification results of five algorithms on the first SAR image.

Figure 3 :
Figure 3: Classification results of four algorithms on the second SAR image.

Figure 4 :
Figure 4: Classification results of four algorithms on the third SAR image.

Figure 5 :
Figure 5: Gaussian noise with different parameters and the corresponding classification results.
3.2:Calculate the affinity values of immune cells in   , and sort them in descending order by affinity values; 3.3: Clone   from the immune cells of   , clone number and the affinity is proportional; 3.4: Super variate each individual in   ; each individual only variates on one position, the group variated is noted   ; 3.5: Calculate support and confidence of each individual in   ; and add the individuals which meet the minimum support and confidence rule and cover at least one or more (includes one) training samples in the category as the memory cells to net ; then remove these immune cells from   , add their corresponding confidence values to the weight vector , and update coverage; 3.6: Replace the original immune cells in   with the immune cells in   , then   performs the pruning operation; 3.7: net M performs the network suppression; if iteration is an integer multiple of some integer, then reduce the minimum confidence value, select parts of rules randomly from   for adding to   in order to maintain the diversity of immune cells;

Table 1 :
are shown in Table1.The last two columns of Table1represent the number of training samples and test samples selected from different data sets, respectively.Table2gives experimental results including average classification accuracy and average running time (CPU) over Basic property of data sets used in experimental section.

Table 2 :
Experimental results of five algorithms on large-scale data sets.
50 independent runs, and the running time in Table2is in seconds (s).All experimental results is obtained by a 10-fold crossmatching technology.

Table 3 :
Classification results of remote sensing image.

Table 4 :
Comparison of confusion matrix of four methods.

Table 5 :
Comparison in the average classification accuracy and the Kappa coefficient of four algorithms.

Table 6 :
Comparison of confusion matrix of four methods.

Table 7 :
Comparisons in the average classification accuracy and kappa coefficient of four algorithms.

Table 8 :
Comparison of confusion matrix of four methods.