At present, methods of bit error rate (BER) analysis for frequency-hopping (FH) system can only solve the problem of barrage jamming, but these are no comprehensive means to follower jamming (FJ). This paper proposes a method of BER analysis with FJ based on frequency hopping M-ary frequency-shift keying (FH/MFSK) system. Through the analysis of the mechanism of FH/MFSK system, assuming the wireless channel is an AWGN channel, the BER formulas for different jamming types are derived, respectively, from the point of one-dimensional probability density function of the output signal of the envelope detector, while judgment principle of envelope detecting method is used. Results show that the BER of multiple FH/MFSK system with FJ is relatively lower. In the worst case of FJ, the BER of FH/4FSK system and FH/8FSK system is reduced by 2 dB and 3 dB, respectively, compared with that of FH/2FSK system. The method of BER analysis proposed provides an effective means to research the BER with FJ in depth.
FH communication has a strong ability to resist jamming and multipath fading [1]; therefore, it has been widely used in tactical communication and civil use [2]. It is of great significance to study the change of BER for FH communication system after it is jammed and to take effective measures to improve the communication quality. FJ and barrage jamming are the main artificial jamming in FH communication. At present, the research about BER analysis for FH communication mainly focuses on barrage jamming, including broadband barrage jamming and narrow-band jamming and partial-band noise jamming (PBNJ). Duan and Zhong [3] analyzed the BER performance of PBNJ for multihop FH/MFSK by means of combination of all probability analysis and multivariate distribution. Zhang and Teh [4, 5] studied the composite effects of multitone jamming (MTJ) and PBNJ for maximum-likelihood fast FH/MFSK receiver over Rayleigh-fading channels. Quan et al. [6, 7] put forward a multisequence frequency hopping system; they derived the BER formulas with PBNJ by using the decision criterion of choosing large size, and the BER performance is analyzed. Dong et al. [8] set the minimum resolution of broadband frequency sweeping jamming (BFSJ) bandwidth to 1/M of the MFSK signal bandwidth for FH/MFSK and derived the closed-form expressions of BER.
From above, the existing research about the BER analysis for FH communication is mainly aimed at barrage jamming, while public research of BER quantitative analysis about FJ is partial but not comprehensive. Riddle [9] had analyzed the performance of a hybrid spread spectrum system against FJ. The error probability of a FH system with typical FSK modulation was derived in the absence of FJ. Though the error probabilities in different communication channels were gained, the modulation mode was of low order, and the jamming mode only considered narrow-band noise. Hassan et al. [10] had examined tone jamming for FH with M-ary FSK modulation and found that the two-tone jamming was the worst case scenario. BERs of different communication and jamming modes were gained from the point of jamming transmitting channel. The jamming signal only considered tone case similarly.
FJ refers to a jamming mode whose jamming signal can follow frequency jump of FH signal [11]. Its characteristics are similar to FH signal in time domain and frequency domain, but their modulation information is generally different. The modulation signal of FJ can be noise, pulse, or single tone. Therefore, it needs to clear the FJ type before analyzing BER performance for FH system; different analytical strategies are adopted for different FJ types. Existing methods of BER analysis for FH system with barrage jamming actually assumed that the modulation signal of jamming is noise, and the jamming power spectral density (PSD) is superimposed with the external noise PSD. This processing way does not consider single tone and other modes, and it cannot be applied to BER analysis with FJ. Existing methods of BER analysis for FH system with FJ were not comprehensive, ignoring the jamming modes or higher modulation order.
Motivated by this, a method of BER analysis with FJ is proposed for FH/MFSK system, and theoretical BER formulas are established. The method is based on the judgment principle of envelope detecting method for two typical types of FJ. Simulation results are given to prove correctness of the theoretical derivation.
2. System Model
The principle block diagram of FH/MFSK system is shown in Figure 1 [12], mainly including the transmitting end and the receiving end. It describes the main signal processing steps. Compared with the practical system, it lacks the secondary steps such as RF filters, IF filters, and so on.
Principle block diagram of FH/MFSK system.
At the transmitting end, the input information is first modulated by MFSK modulator. IF modulated signal is mixed with the hopping RF signal synthesized by the frequency synthesizer to perform frequency shifting at FH modulator. The frequency of the resulting RF signal is constantly changing, and the anti-interception performance and antijamming performance are greatly improved. At the receiving end, the frequency is synchronized first according to the received signal. Then, the system mixes the received signal with the hopping RF signal output by the frequency synthesizer to obtain an IF modulated signal, performing MFSK demodulation by MFSK demodulator to obtain original information.
The low-pass equivalent signal of the MFSK signal can be expressed as(1)st=2EsTdej2πmΔft,m=1,2,…,M,0≤t≤Td,where Es is the signal symbol energy in the transmitting tone; Td is the frequency duration time; Δf is the frequency interval of adjacent MFSK tone; and M is the order of frequency shift-keying modulation.
The FH/MFSK signal can be expressed as(2)xt=2EsTdej2πmΔf+fnt,where fn is the frequency of the nth hop.
Assuming that there is no synchronization error at the receiving end, and the effects of amplitude attenuation and signal transmission delay are ignored, then the received signal can be expressed as(3)rt=xt+Jt+nt,where Jt represents the FJ; nt is the noise due to additive white Gaussian noise (AWGN) with zero mean and variance of σw2=N0/2B, where N0 is the PSD of the noise and bandwidth B meets the condition B=1/Td [13]. The mathematical model of follower jamming can be expressed as(4)Jt=2Pjmjtej2πmΔf+fnt−Δt,where Pj is the power and mjt is the modulated signal of FJ. In this paper, narrow-band noise and single tone signal are considered. Δt is the time delay of FJ signal compared with FH signal at each frequency and meets the condition 0≤Δt<Td.
3. BER Analysis
It is assumed that the FH set contains N frequency points, which are evenly distributed and the hopping speed is constant. For the convenience of analysis, it is also assumed that FJ forms total jamming to all frequency duration time with Δt=0. The transport channel is assumed to be AWGN channel. FH/MFSK signal is demodulated by envelope detection method as shown in Figure 2. The FH signal is equivalent to the fixed-frequency signal at each frequency point. Thus, the process of BER analysis for FH/MFSK system is similar to that of BER analysis for MFSK system.
Demodulation model of envelope detection method for FH/MFSK signal.
Error rate usually includes bit error rate and symbol error rate (SER), and bit error rate is discussed in this paper.
When there is no FJ but external noise alone, the BER of FH/MFSK system is the same as MFSK system, given by [14](5)Pb=12M−1exp−lEb2N0∑i=2M−1iCMiexplEb2−i2N0i,where l=log2M and Eb is the signal bit energy.
3.1. Modulated Signal of FJ Is Narrow-Band Noise
When the modulated signal of FJ is narrow-band noise, called as follower noise jamming (FNJ), it can be modeled as a zero mean Gaussian random variable, whose PSD (Nj) is evenly distributed across the hopping bandwidth. The variance can be expressed as σj2=Nj/2B.
It is assumed that the outputs of envelope detector are Vii=1,2,…,M as shown in Figure 2, and the FH/MFSK signal is jammed by FJ at the first tone. Thus, the output of envelope detector 1 contains FJ and external noise simultaneously. V1 is a generalized Rayleigh distribution with zero mean and variance of σ2, and its one-dimensional probability density function can be expressed as [15](6)fV1=V1σ2e−V12+Es/2σ2I0EsV1σ2,where σ2 represents equivalent noise variance containing variance of external noise and FJ, i.e., σ2=σw2+σj2; I0⋅ represents the first class of zero-order modified Bessel function. Other M−1 envelope detectors only contain external noise, and their outputs Vii=2,3,…,M are Rayleigh distribution with zero mean and variance of σw2. The one-dimensional probability density function of Vi can be expressed as [15](7)fVi=Viσw2e−Vi2/2σw2i=2,3,…,M.
According to the judging principle of envelope detection method, Vi is mutually independent, and there is a fact that the detecting probability of V1 is always bigger than that of Vii≠1, i.e., V1>V2, V1>V3, …, V1>VM when sampling judgment makes a correct decision. Thus, the probability of a symbolic decision being correct can be expressed as(8)Pr=PV1>V2,V1>V3,…,V1>VM=∫0∞fV1PV2<V1,V3<V1,…,VM<V1V1dV1=∫0∞fV1∫0V1fV1dViM−1dV1.
The relation between BER (Pb) and SER (1−Pr) is given by [16](9)Pb=M2M−11−Pr.
Combining (6)–(9), the formulas of BER are reduced to(10)Pb=M2M−1∑k=1M−1−1k+1CM−1kσw2kσ2+σw2e−kEs/2kσ2+σw2.
Noting that m=log2M and Es=mEb, the BER of FH/MFSK system with FNJ is finally expressed as(11)Pb=M2M−1∑k=1M−1−1k+1CM−1k1k+1+kEb/N0/Eb/Nje−mkEb/Nj/k+k+1Eb/N0/Eb/Nj,with Eb/N0 being bit signal-noise ratio and Eb/Nj being bit signal-interference ratio.
3.2. Modulated Signal of FJ Is Single Tone Signal
When the modulated signal of FJ is single tone signal, called as follower tone jamming (FTJ), its mathematical model can be expressed as(12)Jt=2EjTdej2πfnt,where Ej is the symbol energy of jamming signal.
Making the following notations:
A is the amplitude sum of one-hop signal and corresponding jamming signal when FH signal and jamming signal are simultaneously present.
ϕθ−φ is the phase difference of one-hop signal and corresponding jamming signal when FH signal and jamming signal are simultaneously present.
Therefore, A can be expressed as(13)A=Es+Ej+2EsEjcosϕθ−φ.
Although the phase difference ϕθ−φ has a triangular distribution on a 4π interval, cosϕθ−φ is uniformly distributed on a 2π interval, whose probability distribution is given by [13](14)Pcosϕθ−φ≤x=1−1πcos−1x,x≤1.
Same as the case of narrow-band noise, the output of envelope detector 1 contains FJ and external noise. V1 is also a generalized Rayleigh distribution with zero mean but variance of σw2. The one-dimensional probability density function of V1 can be expressed as(15)fV1=V1σw2e−V12+A2/2σw2I0AV1σw2.
The one-dimensional probability density function of other M−1 envelope detectors’ outputs is the same as (7).
Combining (13)–(15) and (7)–(9), the formulas of BER are reduced to(16)Pb=M2M−1∑k=1M−1−1k+1CM−1k1k+1e−kmEb+Ej/k+1N0I02kk+1mEbEjN02.
Noting that interference-signal ratio γ=Pj/Ps=Ej/Es=Ej/mEb, where Pj and Ps represent the power of jamming signal and signal, respectively, the BER of FH/MFSK system with FTJ is finally expressed as(17)Pb=M2M−1∑k=1M−1−1k+1CM−1k1k+1e−mk/k+11+γEb/N0I02mkk+1γEbN0.
4. Numerical Results and Discussion
In this section, some numerical results of the derived BER formulas with FNJ and FTJ are presented, respectively. Analytical results are obtained from the theoretical BER formulas derived in Section 3. Simulation results are obtained by first generating a sequence of binary data for the desired FH signal. It is then mapped into an M-ary symbol stream, and MFSK modulation is performed. Following that, FH modulation is performed, and the resultant signal is passed through an AWGN channel with FJ added. At the receiving end, the envelope detection is performed before sampling judgment making a final decision. The number of total frequency points N is set to 32 and frequency interval of FH is set to 25 kHz. The hopping speed is 200 hop/s, and time delay Δt is set to zero. A numerical research is performed over the parameters Eb/N0, Eb/Nj, and Ps/Pj at different modulation order M.
4.1. FNJ Case
Figure 3 shows BER curves for FH/MFSK system in FNJ case with different Eb/Nj and M. Eb/Nj = INF represents the condition there is no FNJ, and (11) is reduced to (5). The close match between analytical results and simulation results in Figures 3(a)–3(c) verifies the theoretical BER formulas derived in Section 3.1.
BER curves for FH/MFSK system in FNJ case with different Eb/Nj and M. (a) M=2. (b) M=4. (c) M=8.
It is clear to see that the BER of FH/MFSK system in FNJ case decreases as Eb/N0 increases. Moreover, the BER increases with the decrease of Eb/Nj until a peak is reached, which is shown as the black line in Figures 3(a)–3(c). Decreasing Eb/Nj (or increasing the jamming power) exceeding this point will only improves system performance, and the BER decreases. In fact, it can be observed that there is an optimum value of Eb/Nj which makes BER come to maximum for different M. The optimum value of Eb/Nj depends on the fixed Es/Nj (symbol signal-interference ratio), and the relationship can be expressed as(18)mEbNjopt=EsNj=1.
Thus, the value conforms to Eb/Njopt=1/log2M. Corresponding Eb/Njopt are 1(0 dB), 1/2 (−3 dB), and 1/3 (−4.77 dB) in Figures 3(a)–3(c) individually.
Figure 4 shows BER curves for FH/MFSK system with FNJ in worst case. It describes the BER results in optimum value of Eb/Nj. It can be observed that a higher modulation order M makes a lower BER. The BER of FH/4FSK and FH/8FSK system has a decline of 2 dB and 3 dB individually compared with that of FH/2FSK system. Thus, an FH/MFSK system with higher modulation order can improve performance against FNJ.
BER curves for FH/MFSK system with FNJ in worst case.
4.2. FTJ Case
The BER results for FH/MFSK system in FTJ case with different Ps/Pj (1/γ) and M are shown in Figure 5. Ps/Pj = INF represents no FTJ as well, and (17) is reduced to (5). The close match between analytical results and simulation results in Figures 5(a)–5(c) verifies the theoretical BER formulas derived in Section 3.2.
BER curves for FH/MFSK system in FTJ case with different Ps/Pj and M. (a) M=2. (b) M=4. (c) M=8.
It can be seen that the BER of FH/MFSK system in FTJ case decreases as Eb/N0 increases similarly. Simultaneously, the BER increases with the decrease of Ps/Pj until a peak is reached, which is shown as the black line in Figures 5(a)–5(c). Decreasing Ps/Pj (or increasing the jamming power) exceeding this point will only improves system performance as well as the FNJ case, and the BER decreases. Different with FNJ case, the optimum value of Ps/Pj has nothing to do with the order M. Moreover, there is a conclusion that Ps/Pjopt is identically equal to 1(0 dB).
Figure 6 shows BER curves for FH/MFSK system with FTJ in worst case, illustrating the BER results in optimum value of Ps/Pj. Similarly, a higher modulation order M makes a lower BER with the same conditions. The BER of FH/4FSK and FH/8FSK system is reduced by 2 dB and 3 dB, respectively, compared with that of FH/2FSK system. Thus, an FH/MFSK system with higher modulation order can improve performance against FTJ.
BER curves for FH/MFSK system with FTJ in worst case.
Comparing Figures 4 and 6, it can be seen that FTJ is more effective to jamming FH/MFSK system than FNJ in worst case, and the latter one will cause a higher BER. Nevertheless, the effectiveness of FTJ will decrease fast when Ps/Pj is not equal to 0 dB comparing Figures 3 and 5.
5. Conclusion
In this paper, a method of BER analysis with FJ is proposed for FH/MFSK system. Assuming the wireless channel is an AWGN channel, the BER formulas for different jamming types are derived, respectively, from the point of one-dimensional probability density function of the output signal of the envelope detector by theoretical derivation. Numerical results verify the correctness of the theoretical derivation. Results show that multisystem has a lower BER than binary system, and the BER of FH/4FSK and FH/8FSK system has a decline of 2 dB and 3 dB, respectively, compared with FH/2FSK. FNJ is more effective to jamming FH/MFSK system than FTJ in non-worst case. The work in this paper provides an effective means to analyze the BER with FJ, while it is needed to conduct further research for having no regard for the influence of time delay, error correction coding, and convolution interleaving.
Data Availability
The data used to support the findings of this study are available from the corresponding author upon request.
Conflicts of Interest
The authors declare that they have no conflicts of interest regarding the publication of this paper.
Acknowledgments
This study was supported by the Key Pre-Research Fund under Grant no. 9140C87030413JB34001.
YaoF.20122ndBeijing, ChinaPublishing House of Electronics IndustryMarvinK. S.JimK. O.RobertA. S.2002New York, NY, USAMcGraw-HillDuanY.-H.ZhongJ.Performance evaluation of multi-hop FH/MFSK under partial-band jammer2007401279ZhangJ.TehK. C.LiK. H.Maximum-likelihood FFH/MFSK receiver over Rayleigh-fading channels with composite effects of MTJ and PBNJ201159367567910.1109/tcomm.2011.121410.1000162-s2.0-79952985148LeL. M. D.TehK. C.Maximum-likelihood FFH/MFSK receiver with MTJ and PBNJ over frequency-selective Rayleigh-fading channels plus timing and frequency offsetsProceedings of 9th International Conference on Communications and Signal ProcessingDecember 2013Beijing, China1510.1109/ICICS.2013.67828442-s2.0-84899046086QuanH.ZhaoH.CuiP.Anti-jamming frequency hopping system using multiple hopping patterns20158131159117610.1007/s11277-014-2177-12-s2.0-84939959894QuanH.ZhaoH.CuiP.Multi-sequence frequency hopping system and its BER performance analysis over AWGN channel2013295600606DongB.-H.DuY.ZhouL.-L.ChenJ.-Y.Performance analysis of broadband frequency sweeping jamming for FH/MFSK systems2012385109112RiddleL. P.Performance of a hybrid spread spectrum system against follower jammingProceedings of IEEE Conference on Military CommunicationsSeptember 1990Monterey, CA, USA42042410.1109/MILCOM.1990.117454HassanA. A.StarkW. E.HersheyJ. E.Error rate for optimal follower tone-jamming199644554654810.1109/26.4942972-s2.0-0030149407WangJ.JiangC.Analytical study of FFH systems with square-law diversity combining in the presence of multitone interference20004811881196FanX.TanZ.Simulink implementation of frequency-hopping communication system and follower jammingProceedings of 2018 IEEE International Conference on Automation, Electronics and Electrical EngineeringNovember 2018Shenyang, China19219510.1109/AUTEEE.2018.87208032-s2.0-85067096687MillerL. E.LeeJ. S.FrenchR. H.TorrieriD. J.Analysis of an antijam FH acquisition scheme199240116017010.1109/26.1267172-s2.0-0026627444MeiM.WangS.QiuY.DuanX.2005Beijing, ChinaNational Defense Industry PressZhangH.CaoL.2007Beijing, ChinaScience PressProakisJ. G.20014thNew York, NY, USAMcGraw-Hill