Game-Based Multiobjective Optimization of Suspension System for In-Wheel Motor Drive Electric Vehicle

Since the driving motor is embedded in the wheel, the unsprung mass and the wheel rotational inertia of the in-wheel motor drive electric vehicle both increase, which not only affect the vehicle smoothness but also worsen the motor’s working condition due to its own vertical vibration. ,e evaluation index of in-wheel motor’s vertical vibration is introduced on the basis of vehicle smoothness analysis. ,e parameters’ optimization of vibration absorber and suspension are carried out, respectively, and the optimization results show the contradictory relationship between smoothness objective and the motor’s vertical vibration acceleration objective. Regarding the contradictory indices of the smoothness and the motor’s vertical acceleration as the objective function, a multiobjective optimization scheme is designed.,en, the orthogonal experimentation and fuzzy clustering method are applied in the multiobjective optimized design based on the game decision analysis, and the Nash equilibrium and cooperative competition game theory are used to optimize the parameters of suspension and vibration absorber. ,e optimized results verify the game relation between the optimization variables, the game optimization obtains better optimized results than traditional linear weight sum method, and the in-wheel motor functional stability and the vehicle smoothness can be both achieved. Compared with the traditional complex iterative process and the manmade preassurance weight allocation, the game optimization has the advantages of less iterations, faster convergence, and less influence by human experience.


Introduction
New energy automobiles have become the forwardlooking field in the car industry. e driven technology of the new energy automobiles and the traditional internal combustion engine cars shares a great deal of differences, among which the in-wheel motor drive electric vehicles embrace a promising prospect as a new car driven method. Compared with motor integrated power driven, the inwheel motor drive has a big advantage, which is more flexible and has less complicated mechanic driven system. Nevertheless, it also has some disadvantages. e electric wheels in the in-wheel drive vehicles combine the electric machines, wheel hubs, retarding mechanisms, and brakes together, greatly increasing the unsprung mass and rotational inertia, worsening the vibration caused by the inwheel motor drive, and causing the vibration between the neighbour parts and the rotors, which brings bad influence on the vehicles' smoothness and the safety of the tires touching the ground. How to reduce and even get rid of this kind of bad effect has become one of the key problems needed to be solved in the development of in-wheel drive electric vehicles.
Focusing on the above problems, currently, the scholars have already conducted initial research on the related questions to reduce the influence of the in-wheel drive motor on vehicle vibration. References [1][2][3][4][5] pointed out that, because of the introduction of the in-wheel motors, the unsprung mass of the vehicle is increased clearly, promoting the dynamic load of the tires and the vibration acceleration of the car greatly to affect the ground-touching features of the tires and the smoothness of the vehicle. In order to suppress the in-wheel vibration and improve vehicle ride comfort, the in-wheel motor in [6] was considered as a dynamic vibration absorber, which was isolated from the unsprung mass by using a spring and a damper. A Rojas et al. [7] conducted a deep and thorough study on the active and passive suspensions of the in-wheel motor drive cars and the in-wheel motors including the damping suspension devices, and the study results revealed that the half and active suspension system could reduce the unsprung mass vertical vibration acceleration. But it did little improvement in the wheel ground-touching load, while the design of the motor suspension could effectively improve the wheel groundtouching load and the sprung mass vertical vibration acceleration. Guo-bao Ning et al. [8] from Tongji University analysed the transformation of the vehicle vertical vibration caused by the in-wheel motor system and put forward the idea of transferring the motor mass from the unsprung load with the method of mass transferring as the mass of the vibration absorbing unit to lower the wheel motor load. Scholars like Ma Ying [9] used the minimum root-meansquare value of the vehicle smoothness index as the optimized target and conduced optimization on the in-wheel motor suspension motors. e result showed that the optimized suspension structure of the in-wheel motor could not only eliminate the negative effect exerted on the vertical operation of the in-wheel motors but also improve the wheel ground-touching operations and improve the smoothness and safety of the electric cars.
However, with the development of the in-wheel motor technology, the orientation of the in-wheel motor drive cars is not limited to the travel tool in the city. Its optimized analysis is not limited to the traditional smoothness optimization. As the core part of the in-wheel motor electric cars, the operation, and condition of the in-wheel motor directly exert influences on the safety and cruising ability of the car. e research on in-wheel motor has gained more and more attention. Wei Tong et al. [10] used 1/4 vehicle motor force models to introduce the appraisal index of the vehicle smoothness and the motor vehicle vibration acceleration, based on the relative root-mean-square value and the transmission characteristics, among which the motor vehicle vibration is closely related to the features of the vehicle. It provides available ranges for matching the vehicle performances. In [11], it was proposed that the magnet gap deformation will lead to unbalanced magnetic force, which was a critical vibration source to the vehicle vertical dynamics. For this problem, an in-wheel-motor-driven electric vehicle without a speed reducer was considered as the research subject, and the results demonstrated that the magnetic force had an influence on vehicle vertical dynamics, which provided some theoretical basis for the design and optimization of the in-wheel motor drive electric vehicle.
Besides, the related optimized design analysis and research on in-wheel motors have progressed greatly [12,13], among which, the game theory is applied more and more often in recent years in engineering optimized design as a competitive nature-driven theory and method. Suheylä Ozymldmrmm [14] put forward the optimized method based on the Nash equilibrium and noncompetition game theory in a relatively systematic way, realizing the optimization on the nonrenewable resource models, with calculating speedup by 90% compared with the traditional genetic algorithm. Periaux et al. [15] applied multiple-aimed Nash equilibrium game method in the numerous engineering examples of the airfoil aerodynamic promotion motor optimization, multiple-wing optimization design, and multiple-standard reverse power optimization. Zhong Chen et al. [16] adopted the competition and cooperation game models to conduct multiple-targeted optimized design on the Baihe Dam's shape, reaching a better design plan. Hong-bo Zhang et al. [17] applied Nash equilibrium on the collision analysis of automobiles, confronted with complicated automobile analysis problems, and the game optimization method presented good robustness, with faster convergence during the problem-solving process, meeting the multiple-targeted demands. It could be seen that the game analysis had solved many practical and effective engineering problems.
Many related solutions have been put forward to overcome the negative impact brought by the torque ripple of the in-wheel motors on electric automobiles. While the suspension vibration and the in-wheel motor vibration are both affected by each other. Only observing the vibration of the suspension to get good ride comfort may lead the inwheel motor over vibration. Due to the limited space in the wheel for the motor, the over vibration of the vehicle motor will shorten its using lifetime; meanwhile, this also affects the other parts working in the wheel or the vehicle. In this paper, we will discuss different suspension types with the in-wheel motor. During different suspension types, suspension parameters selection will get different vibration performance. us, the parameter optimization method and strategy are very important to improve the suspension performance. In this paper, it is focused on the two optimized schemes on the in-wheel motor drive vehicle, which are suspension parameters optimization and vibration absorber optimization, respectively. Based on vehicle's smoothness analysis, the evaluation index of vertical vibration of the in-wheel motor is introduced. e parameters of suspension and vibration absorber are optimized, respectively, and the two optimization schemes are compared and analysed. en, regarding the contradictory smoothness index and the in-wheel vertical acceleration as the two objective functions, the suspension parameters' multiobjective optimization scheme is carried out, which could better consider the smoothness of the whole vehicle and the stability of the motor vibration. Finally, the orthogonal experimentation and fuzzy clustering method are applied in the multiobjective optimization design based on the game decision analysis, realizing the transfer of the multiobjective optimization to game-related problems and the division of the game player side. e Nash equilibrium and the cooperation and competition equilibrium are adopted, respectively, to solve the best solution of the related parameters with the profit function as optimization target. Compared with the traditional optimized result, the optimization of the game theory is further analysed, and the effect of the multiobjective optimization with the help of the game theory is validated.

Suspension Model of In-Wheel Motor
Drive Vehicle e torque ripple of the in-wheel motor exerts influences on various functional parameters of the suspension system, especially on the unsprung mass wheel, deteriorating the ground-catching ability of the wheels and harm to the smooth travel of the vehicles. At the same time, the vertical vibration of the in-wheel motor will also deteriorate the motor's working condition. In [18], the regular solutions were pointed out: (1) to conduct torque ripple control over the motor or to optimize the motor types; (2) to optimize or to reallocate the automobile suspension; (3) to design an inwheel motor vibration absorbing system in particular. is paper mainly focuses on the influence exerted by the electric wheels on the vehicles' vertical motor forces, instead of the function of the motor itself. erefore, the study primarily is on the latter two solutions in this paper. e suspension parameter optimization model and the vibration absorbing optimization model are established, respectively.

Suspension Parameter Optimization Model.
e simplified 1/4 vertical vibration model of the vehicle with the inwheel motor is established as shown in Figure 1.
Because the tire damping is relatively low, the tire damping is neglected. e motion equation of the 1/4 vehicle vertical vibration model with in-wheel motor is built as follows: (1) e root-mean-square value of the car body's acceler- x 0 df, the rootmean-square value of the suspension dynamic deflection is x 0 df, and the rootmean-square value of the wheels' relative loading is x 0 df. In the above formula, G q (n 0 ) is the average value of the road spectrum, n 0 is the reference space frequency, and u is the vehicle speed. |H(jω)| € x 0 is the frequency characteristics of the acceleration of car body € x 2 to the random road input speed _ x 0 , |H(jω)| f d ∼ _ x 0 is the amplitude-frequency characteristics of suspension dynamic deflection to the random road input speed _ x 0 , |H(jω)| F d /G ∼ _ x 0 is the amplitude-frequency characteristics of wheels' relative loading to random road input speed _ x 0 , x 0 is the input of the uneven degree of the road, x j (j � 1, 2, 3) is the related mass position movement, m 1 is the unsprung mass (mass of the wheel), m 2 is the sprung mass (mass of the 1/4 car body), m 3 is the inwheel motor mass, c 1 is the wheel damping coefficient, c 2 is the vehicle suspension damping coefficient, k 1 is the tire stiffness, and k 2 is the vehicle suspension stiffness. e system parameters of the target vehicle are shown in Table 1.

Vibration Absorbing Optimization Model.
e introduction of the in-wheel motor brings about the severe vertical negative effect on the vehicle. On the premise of not changing the suspension structure and parameters of the initial design in Section 2.1, the special in-wheel motor vibration absorbing system is installed. e 1/4 inwheel motor vehicle vertical vibration model with vibration absorbing device [10,19] is set up and shown in Figure 2. e wheel, vehicle body, and in-wheel motor's vertical displacement are x 1 , x 2 , and x 3 , respectively. With the origin of coordinates staying in the respective equilibrium points, the road displacement input is x 0 and its dynamic differential equation is In the above formula, M is the quality matrix, C is the damping matrix, and K is the stiffness matrix. where c 3 is the damping coefficient of vibration absorbing system between the motor and the wheel and k 3 is the spring stiffness between the motor and the wheel. e in-wheel motor's vertical displacement and the inwheel motor's vertical displacement relative to the wheel, that is, the root-mean-square value of the in-wheel motor dynamic deflection, are where |H(jω) x 0 | represent the frequency response of in-wheel motors' motion distance of x 3 and the relative motion distance of the in-wheel motor x 3 − x 1 to the vertical speed input _ x 0 , respectively.

Suspension Parameter Optimization.
Suspension could be used to buffer the impact on the in-wheel motor drive electric vehicle caused by the rough road and reduce the vibration to ensure the smooth travel of the vehicle. e suspension parameter optimization aims at fulfilling the realistic demand of the vehicle wheels to reach an optimal suspension parameter value. e in-wheel motor is the drive core of in-wheel motor drive electric vehicle. Its vertical vibration analysis is one of the crucial subjects in the research. e covibration frequency belt of the car-carried inwheel motor has the characteristics of large changing range, big covibration peak, slow decreasing speed, and so on [20].
When matching the in-wheel vehicle parameters, the motor vibration's effect has to be noted particularly.
According to the standard GB/T 4970-1996, the car's smoothness relies on the random input of driving trial method. e suspension parameter optimization scheme is set as follows: selecting the road average spectrum G q (n 0 ) as 0.0000256 m 3 (level C) and the random road speed 80 km/h as working encouragement. e evaluation index of vertical vibration of the in-wheel motor σ € x 3 is introduced on the basis of vehicles' smoothness optimization index J vao � σ € x 2 + σ f d + σ F d /G , and the optimization is carried out for the model in Section 2.1 to get the optimal suspension damping and stiffness parameter. σ € x 2 is the root-mean-square value of the car body's acceleration, σ fd is the root-mean-square value of the suspension dynamic deflection, and σ F/G is the root-mean-square value of the wheels' relative loading. m 3 and m 2 are solid connections, so the vibration of m 3 is basically the same as m 2 . erefore, the vibration of m 3 is about the relative dynamic load of the wheel. e variation range of the variables in the optimization process is e suspension dynamic deflection f d should be properly allocated with its limit distance [f d ]; otherwise, the suspension would constantly bump into the limited area. us, the restriction 0 ≤ f d ≤ 0.1 is added.

Vibration Absorber Optimization.
e introduction of the in-wheel motors brings about the severe vertical negative effect on the vehicle. Adoption of the method in 3.1 could have some improvement, but the challenges are great in terms of the parameter adjustment and matching involved in the vehicle stability in the method [21]. To solve this problem, the in-wheel motor in [6] was considered as a dynamic vibration absorber, which was isolated from the wheel shaft and hub by using an in-wheel spring and a damper, whereby the rigid connections between the motor Table 1: System parameters of the target vehicle.
Parameter  and the hub were replaced by flexible connections. Based on the model in Section 2.2, the vibration absorber optimization scheme is designed in this section, and the vibration absorber parameters k 3 and c 3 are optimized by using the same working condition, evaluation index, and objective function as the suspension parameter optimization scheme. e vertical vibration acceleration can be calculated by equation (4). Substituting the restriction of the suspension x 0 ≤ 0.00287m , and other restrictions keep the same with the suspension optimization scheme. Mark the smoothness optimization index as J vao , and the optimization comparison results are shown in Table 2.

Comparison and Analysis of Optimization Results.
e comparison results of two optimization schemes show that the two schemes both improve the smoothness of electric vehicle. e vibration absorber optimization scheme is superior to the suspension parameter optimization scheme in terms of vehicle smoothness. In the suspension optimization, the in-wheel motor acceleration increased by 1.2% with a little deterioration, while in the vibration absorbing optimization, the in-wheel motor acceleration increased by 19.7% with bigger deterioration.
From the above analysis, it could be seen that the vibration absorbing scheme enjoys an obvious improvement in the vehicle's smoothness compared with the initial design. However, the condition of the in-wheel motor deteriorates greatly. In suspension parameter optimization, the smoothness improvement is not that obviously compared with the initial design and the corresponding working condition of the in-wheel motor in this scheme deteriorates only a little.
For this circumstance, reference [22] mentioned that this is caused by the newly installed vibration absorber. After installing the vibration absorber, the coupling relationship of the system increases, and the outer force leads to the covibration of the main system and the vibration absorbing system. Under the circumstance of the same input energy of the road, the vibration energy is separated by the main system and the vibration absorbing system. By adjusting the vibration absorber damping and spring, the vibration of the system comes near to the road vibration frequency and thus resonance happens as a result. e majority of the energy is absorbed and under the circumstance of the same input energy of the road, it reaches the goal of decreasing the energy of the main system. But compared with the time when the dynamic vibration absorber is not installed, m 3 is in the free vibration end and the system mass is reduced greatly compared with the former solid connection.
ough part of the vibration is absorbed by damping and spring, generally speaking, the ability to resist the road input vibration is reduced. If the road input energy is large, the independent takeover of the vibration should be taken by m 3 but this would lead to worse working conditions. erefore, it is required to design a new multiobjective optimization of suspension parameter, by adjusting the parameters k 2 , c 2 , k 3 , and c 3 to enable both the suspension system's smoothness and in-wheel motor vertical vibration acceleration in a better working condition.

Multiple-Objective Optimal Design
Based on the analysis in Section 3.3, choosing the vehicle main suspension damping coefficient and stiffness, the damping coefficient and stiffness of the vibration absorbing system between motor and wheel as the optimization variables of the multiple-objective optimization, that is, the optimization variable, is x � k 2 , k 3 , c 2 , c 3 in the optimization model. Considering the in-wheel motor drive electric vehicle's demand for smoothness and the working condition and lifespan of in-wheel motor, a multiple-objective optimal design is needed. Mark the multiple-objective optimization's smoothness evaluation index J vao as the first optimal objective and the root-mean-square value of the in-wheel motor acceleration σ € x 3 as the second objective. To fully coordinate the conflicts and confrontation between the first and second optimization objective, the model in Section 2.2 is used as the optimization model, including the variables of k 2 , c 2 , k 3 , and c 3 . To better compare the optimization results, the initial design parameter {k 3 , c 3 } � {45000, 4500} is set.
Firstly, the classic linear weight sum method is adopted to solve this multiple-objective optimization problem. It is shown as follows: In the above formula, q i is the weight and k i�1 q i � 1 . By using different weight parameters to solve the above optimal problem, the solution could be reached as follows.

Objective Function.
e smoothness evaluation index J vao and the root-mean-square values of in-wheel motor acceleration σ € x 3 are used that as the objective function in the multiple-objective optimization, which are expressed as f 1 (x) and f 2 (x), respectively. And we have the following formula:

4.2.
Restrictions. e changing ranges of the optimization variables in the multiple-objective optimization process are as follows:

Optimization Result and Its Analysis.
Because there is not enough former theoretical support for solutions, it takes nine groups of different weight parameters for optimization, regarding the average value [23] as the optimal result shown in Table 2. As a representative, the nine groups of different weight parameters are selected for the multiple-objective optimization, shown in Table 3. Compared with the suspension parameter optimization, the multiple-objective optimization smoothness evaluation index J vao is reduced by 30%, and compared with the vibration absorbing optimization, it increased by 2%. Compared with the suspension parameter optimization, the inwheel motor acceleration increased by 3%, and compared with the vibration absorbing optimization, it is reduced by 20%. Compared with the initial design, multiple-objective optimization smoothness evaluation index J vao is reduced by 31%, and the in-wheel motor acceleration only increased by 4%. Compared with the suspension parameter optimization, the vibration absorbing optimization, and multiple-objective optimization, the solution of the multiobjective optimization scheme is more balanced, which is more comprehensive and reasonable than the original design.

Basic Principles of Game eory.
Game means an action competitive or with protesting nature. From the perspective of methodology, the game theory is a vector optimization consisting of objective function vector and strategic vector. From the perspective of countermeasure, the game mainly studies the decision when the decision-makers act with each other and the equilibrium formed by the decision under some restrictions [24].
From the above sections, it could be seen that, in the suspension parameter optimization, the improvement of the smoothness is smaller compared with the initial design. e in-wheel motor working condition is only deteriorated a little bit, while in the vibration absorbing optimization, the smoothness is obviously improved compared with the initial design and the corresponding in-wheel motor's working condition deteriorates greatly.
It could be seen that the smoothness evaluation index is in a relative resistance relation with the index, that is, the acceleration of in-wheel motors, meeting the requirement of the game equilibrium optimization. e optimization is actually to form an individual advantage and a decision-making process of taking profits separately from each side. By game decisions' mutual compromise, the final optimization results eliminate the gaining contradictions between the two, thus forming an equilibrium scheme taking both the vehicle's smoothness and the motor's vibration smoothness into account.

Description of the Game Equilibrium Optimization.
Game equilibrium optimization is represented by Nash noncompetitive game and cooperation-competitive game, the main differences of which lie in whether the game individuals abide by the unified agreement. e cooperative competition game focuses more on the whole profit and team cooperation, rather than the cooperative competition game, which only considers its self-interest to realize the maximization of its profits [25]. In the specific formula, the cooperative competition game replaces the profit function of the Nash equilibrium game by the profit weighting function.
e Nash equilibrium game roughly consists of the following four steps [26]: (1) By calculating the sensitivity of the variables in the game, it divides the optimization variables X 1 , X 2 , . . . , X m into the strategic combination S � S 1 , S 2 , . . . , S m in the game side, and then game contest is conducted. . ., f m , respectively; that is, . . , s (0) m , the proper objective optimization game method (Nash equilibrium or Cooperative competition game) is selected to carry out the single objective optimization for strategic combination S 1 , S 2 , . . . , S m . at is, the best decision s * i is solved for any i th game side (i � 1, 2, ..., m), making the game gaining the profit F i (s * i , s (0) i ) ⟶ min and meeting the existing restrictions. (4) Let s (1) � s * 1 ∪ s * 2 ∪ . . . ∪ s * m , and calculate the distance (norm) between the two (former and latter) strategic combinations to see if it meets the convergence criterion ‖s (1) − s (0) ‖ ≤ ε � 10 −6 . If it is satisfied, the game process is over; if not, use s (1) replacing s (0) and then transfer to step (3) to go over the process. e framework of Nash equilibrium game is shown in Figure 3. Mathematical Problems in Engineering

Game Optimization Calculation.
Choosing the same multiobjective optimization model, optimization target, optimization function, and restrictions with those in Section 4 to set up game optimization model, mark the game optimization's smoothness evaluation index as J vao for the game optimization calculation [27]. Firstly, conduct single objective optimization to the objective function J vao , σ € x 3 , respectively, and get Table 4. e optimization target in this paper is the nonlinear optimization target, very sensitive to searching space. e calculation efficiency of using general strategy division is relatively low. erefore, it uses the orthogonal test in the experimental division to calculate the sensitivity of the various optimization variables to the objective functions.
It is known that this optimization contains four variables and two objective functions. According to the orthogonal test rule [28], the orthogonal experiment table L 8 (2 7 ) is set up. e first five lists of the table are selected to arrange the orthogonal experiment. e calculation formula of the sensitivity is as follows: (10) where i is the number of factor level, j is the number of factor column, R j is the range of factor x j 's average value K ij , K ij � T ij /a j , a j is the number of horizontal repetitions of the scheduled factors in the jth column, and T ij is the total value of the i level of the factor arranged in the jth column whose magnitude is the sum of the a j test results at the jth level.
Choose the confidence level 0.92 to divide the matrix. From the fuzzy clustering method, the strategic set of game           conduct Nash equilibrium optimization. e results are shown in Table 9 and Figure 4. e cooperative competition game optimization is conducted using formula (9) as the profit function of the game optimization and the results are shown in Table 9 and Figure 5.

Optimization Result Comparison and Analysis
Based on the Game. According to the above results' comparison, the evaluation index presents more reasonable equilibrium relative to the suspension parameter and vibration absorber optimization, which are more close to multiple-objective optimization, that is, the traditional weighting optimization scheme. But compared with the traditional and complex iterative process and the manmade preassurance weight allocation, the game optimization has the advantages of less iterations, faster convergence, and less influenced by human factor, which is more efficient. Meanwhile, vertically comparing the optimization parameters in the different optimizations, it is easy to find that although the game optimization results are similar, the optimization parameters k 2 , c 2 , k 3 , and c 3 are not close to each other. e basic optimal parameters k 2 , c 2 , k 3 , and c 3 in Nash equilibrium optimization are basically those values between the suspension parameter optimization and the vibration absorber optimization or close to that of either group of parameters. In Nash equilibrium optimization, the specific comparison results k 2 (11437 < 11600 < 15000), c 2 (1236 < 1414 < 1500), k 3 , and c 3 are close to those in vibration absorber optimization, while the optimization parameters k 2 , c 2 , k 3 , and c 3 in the cooperative competition optimization are more close to those in multiobjective optimization, which is due to the different profits focused by the game sides. In Nash equilibrium strategy, the game sides do not have a favour towards the objectives and they only focus on their own profits and the competition relations among the various objectives.
Nash equilibrium optimization, suspension parameters, and vibration absorber optimization have the same optimal parameters k 2 , c 2 , k 3 , and c 3 and the same profits (optimization objective), but they adopt different optimization strategies (suspension optimization and vibration absorber optimization), leading to the profits of each side conflict to each other (smoothness evaluation index and inwheel motor acceleration have formed a certain contrast). erefore, the Nash equilibrium could be totally seen as the competition and game between two game strategies of suspension parameters optimization and vibration absorber optimization, and the parameters allocation stays between the two values of the two optimizations. In cooperative competition equilibrium game strategy, the game sides focus on the whole profit of all the game sides and the objectives remain as cooperative and competitive relationship. e parameters are coordinated better. Similar to the idea of the traditional weight allocation, the parameters' allocation is close to the multiobjective optimization naturally.
To view in a comprehensive way, Nash equilibrium game strategy and cooperative competition game strategy both achieve the optimization design effect of the in-wheel motor, fulfilling the complex design demand of the in-wheel motors and revealing the effectiveness and efficiency of game optimization.

Conclusions
e two common in-wheel motor smoothness optimization models, the suspension parameter optimization model and vibration absorber optimization model, are set up. Based on vehicle's smoothness analysis, the evaluation index of inwheel motors' vertical vibration is introduced. e suspension stiffness and damping parameters are optimized for the suspension parameter optimization model, and the stiffness and damping parameters of the vibration absorber are optimized for the vibration absorber optimization model. e comparison and analysis of two optimization results show that, compared with the suspension parameter optimization scheme, the vibration absorber optimization scheme can better improve vehicle smoothness, but the corresponding vertical vibration acceleration deterioration of in-wheel motor worsens more.
Comparison analysis between the suspension optimization scheme and the vibration absorber optimization scheme is conducted. On this basis, a multiple-objective optimization scheme is designed. e linear weighting method is used to weigh the smoothness index and the inwheel motors' vibration acceleration index, and the parameters of suspension stiffness k 2 , suspension damping c 2 , vibration absorber stiffness k 3 , and the vibration absorber damping c 3 are optimized by multiple-objective optimization scheme. e results show that the two optimization objectives are adjusted in a great balance to enable the vehicle in-wheel motor to work in the stable condition while maintaining the good smoothness of the vehicle. e game optimization is applied to deal with the conflict of the two optimization objectives. Taking advantage of the orthogonal experiment combined with fuzzy clustering method, the multiple-objective optimization is converted to game equilibrium optimization. Based on the sensitivity of the optimization variables to optimization objectives, the different game strategic combinations are divided to conduct game confrontation. Using the main suspension and vibration absorber stiffness and damping coefficients as the optimization variables and the minimum profit function as objective function, the Nash equilibrium and cooperative competition game optimizations are adopted to optimize the parameters of suspension and vibration absorber, and the results are more ideal than that by linear weighting multiobjective optimization.
Combined with the game theory, the internal game relation between different optimization results is analysed. e game optimization has the advantages of the greater convergence and high efficiency. e different optimal equilibriums of the suspension vibration and inwheel motor vibration have been achieved by the two different game strategies. Compared with the traditional linear weighting method, this method does not require the weighting of different objectives, which has greater value applied in engineering. Although the optimization design can significantly promote the in-wheel motor drive vehicle vertical vibration performance, the parameters in the system cannot be dynamically regulated according to the vehicle driving conditions. To design the controllers to achieve the suspension and absorber parameters' real-time regulation while driving can further reduce the vehicle vertical vibration. Meanwhile, the motor vibration has the coupling with the suspension system vertical vibration, so paying attention to the coordinated controller design of the motor and suspension considering their characteristics, so as to further reduce the in-wheel motor drive vehicle vertical vibration and improve the system comprehensive performance, is especially worth studying.

Data Availability
e data used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest
e authors declare that they have no conflicts of interest.