Physicochemical Properties and Biological Activities of Garlic (Allium sativum L.) Bulb and Leek (Allium ampeloprasum L. var. Porrum) Leaf Oil Extracts

Allium species including garlic and leek exhibits a broad range of medicinal and nutritional properties. Therefore, this study investigates the physicochemical and biological activities of garlic (Allium sativum L.) and leek (A. ampeloprasum L. var. Porrum) oil extracts. The result indicated that physicochemical properties indicated that significantly higher oil yield (21.25%), ACV (2.66 mg/g), FFA (1.34%), and PV (4.10 meq/kg) and also antioxidant activities with respect to 2, 2-diphenyl-1-picrylhydrazyl, DPPH (27.60 ± 1.55%), hydrogen peroxide (12.35 ± 0.92%) free radical scavenging activities, and ascorbic acid content (25.30 ± 3.25%) were obtained for leek leaf oil extract. Stronger antibacterial activity with a maximum zone of inhibition (16.00 mm), minimum inhibitory concentration (MIC) (0.20 µg/ml), and minimum bactericidal concentration (MBC) (0.40 µg/ml) was recorded for leek oil extract against S. pyogenes. However, garlic oil has presented stronger antifungal activity with a maximum zone of inhibition (13.50 mm), MIC (0.40 µg/ml), and minimum fungicidal concentration (MFC) (0.75 µg/ml) against Candida albicans. It is concluded from the results of this investigation that oils extracts of garlic bulb and leek leaves demonstrated significant biological activities that can be used as sources for pharmaceutical and nutraceutical ingredients.

Allium spp., such as garlic, onion, and leek, have long been known to be effective in the therapy of infectious diseases. In particular, garlic has a greater antimicrobial activity than other Allium spp. as it contains several hydrophobic antimicrobial compounds, such as allicin, vinyldithiin, ajoene, and diallyl polysulfide [4]. Allicin is a characteristic sulfur-containing compound found in raw garlic and exhibits antimicrobial activity against both Grampositive and Gram-negative bacteria. In addition, allicin has been reported to inhibit the biofilm formation of bacteria, which is a major cause of bacterial resistance to the antibiotic treatment of infections, by regulating quorum sensing in microorganisms [4,5]. e spread of drug-resistant bacteria has become a serious global concern in the therapy of infectious diseases. A number of antibiotics have been developed and used to treat infectious diseases. However, the increased frequency in the use of such antibiotics has led to changes in bacterial characteristics, with bacteria acquiring drug-resistant ability through the mutations of drug-target molecules, the overexpression of efflux pumps, changes in the composition of the cell membrane, the production of metabolizing enzymes, and biofilm formation [6]. Garlic (Allium sativum L.) has been used as not only a food but also as a remedy for several diseases, such as cardiovascular diseases and cancer [7,8].
Garlic and leek oils are applicable in pharmaceuticals and nutraceutical industries as flavouring agents and can reduce blood pressure and prevent cancer and cardiovascular diseases through reducing serum LDL cholesterol and triglycerides [9].
ere are many reports on the antimicrobial, antioxidant, antithrombotic, and anticancer properties of garlic oil, which could be used to prevent nausea, diarrhea, ease coughs, and treatment in conditions such as malaria and cholera [10]. e organosulphur compounds in garlic and onion are responsible for their characteristic odour and flavour, as well as most of their biological activities [11]. e aim of the present study was to assess the physicochemical properties, antioxidant, and antimicrobial activities of oil extracts from garlic bulb and leek leaves.

Plant Material and Extract Preparation.
e experiment was conducted in the Molecular Biology and Biotechnology Laboratory, Haramaya University. e garlic (Allium sativum L.) bulb and leek (Allium ampeloprasum L. var. Porrum) leaf samples were collected from a farmland in Kombolcha district, East Hararghe, Ethiopia. e garlic bulb and leek leaf samples were manually washed with distilled water and residual moisture evaporated at room temperature. Determination of moisture (on dry basis) was carried out [12]. e oil extraction was done in the Soxhlet apparatus using hexane as a solvent.

Physicochemical Properties of the Oil Extracts.
e oil yield and specific gravity were done based on Soxhlet oil method [13][14][15]. e percentage oil yield of each sample was determined as follows: where oil weight � W2-W1, W1 is the weight of the extraction flask (g), and W2 is the weight of the extraction flask plus the dried crude fat (g). e specific gravity of oil was determined gravimetrically by employing the weight ratio of oil to the equivalent amount of water according to the following formula: where W2 and W1 are the weights of oil and equivalent amount of water, respectively.

Determination of Acid
Value. e acid value was determined as per the AOAC [16] method. Briefly, 2 g of oil sample was weighed into a 250 ml conical flask, and then, 25 ml diethyl ether mixed with 25 ml alcohol and 1 ml of 1% phenolphthalein indicator were added to the oil sample. e conical flask was then placed on a hot waterbath until oil was completely dissolved in the solvent. e hot solution was then titrated with 0.1 M KOH until a pink colour, which persisted for 15 seconds, was noticed. e acid value was calculated as Acid value � Titre(ml)x 5.61 Weight of sample used , which is expressed as mg KOH/g of oil.

Estimation of Free Fatty
Acid. e percentage of free fatty acid (%FFA) was estimated by multiplying the acid value with the factor 0.503. %FFA � 0.503 × acid value.

Determination of Peroxide Value.
To a weighed sample (1.0 g) in a flask was added powdered potassium iodide (1.0 g) and solvent mixture (2 : 1, glacial acetic acid: chloroform v/v). e resulting solution was then placed on a waterbath to dissolve properly, and 5% potassium iodide (20 cm 3 ) was then added. e sample solution was then titrated with 0.002 N sodium thiosulphate using starch as an indicator. e peroxide values of the samples were calculated using the following equation [17].
where PV is the peroxide value, V is the volume of sodium thiosulphate used, 2 � (N x 1000)/W, N is the normality of sodium thiosulphate used, and W is the weight of sample used.
2.6. Antioxidant Activity 2.6.1. DPPH Radical Scavenging Activity. e radical scavenging activity (RSA) of the oil extract is used to measure antioxidant activity using the DPPH (2, 2-diphenyl-1-picrylhydrazyl) method [18]. Briefly, 2 ml of oil extract (100 µg/ ml) was added to 2 mL of DPPH (0.1 mM) solution. e mixtures were kept aside in a dark area for 30 min and absorbance was measured at λmax 517 nm against an equivalent amount of DPPH and methanol as a blank. e percentage of DPPH radical scavenging activity (RSA %) was estimated using the following equation: where A blank is the absorbance of the blank solution and A sample is the absorbance in the presence of the sample. Ascorbic acid was used as the positive control.

Hydrogen Peroxide Scavenging
Activity. e radical scavenging activity of the oil extract was determined using the H 2 O 2 method [19]. Briefly, 2 ml of oil extract solution (100 µg/ml) was added to 4.0 ml of H 2 O 2 (20 mM) solution in phosphate buffer (pH 7.4). After 10 min, the absorbance was measured at λ max 230 nm against the phosphate buffer blank solution. e percentage scavenging of H 2 O 2 was calculated using the equation: where A blank is the absorbance of the blank (phosphate buffer with H 2 O 2 ) and A sample is the absorbance of the oil extracts.

Ascorbic Acid
Content. e ascorbic acid content was determined using the 2, 6-dichlorophenol indophenol (DCPIP) dye method [16]. Accordingly, 5 ml of the standard ascorbic acid solution was pipetted into a 100 ml conical flask, and then, 5 ml of the 3% HPO 3 solution was added. e ascorbic acid solution was titrated with the dye solution to a pink colour that persisted for 15 s. e titer value was recorded. Dye factor was expressed as mg of ascorbic acid per ml of the dye. Since 5 ml of the standard ascorbic acid solution contains 0.5 mg ascorbic acid, Dye factor (mg ascorbic acid per dye) � 0.5mg titrant volume . (7) One ml of the extracted oil was diluted to 5 ml with 3% metaphosphoric acid in a 50 ml volumetric flask. e aliquot was then centrifuged (Model, Z300, 580W, 3052 Nm, Germany) for 15 minutes and titrated with the standard dye to a pink end point (persisting for 15 seconds). e ascorbic acid content was calculated from the titration value, dye factor, dilution, and volume of the sample as where A.A is the ascorbic acid and ABR is the average burette reading.

Antimicrobial Activity of the Oil Extracts.
e antimicrobial experiment was arranged as 2X1X4 (2 source extracts: garlic bulb and leek leaves at three concentration levels, 1 solvent system, i.e., hexane, 4 test organisms including two bacteria (Shigella boyelli (Gram-negative) and Streptococcus pyogenes (Gram-positive)) and two fungi (Aspergillus niger and Candida albicans)) completely randomized factorial design in three replications. e test pathogens were obtained from Ethiopian Institute of Public Health and Nutrition, Addis Ababa, Ethiopia. e fungal and bacterial pathogens were subcultured and maintained on potato dextrose agar (PDA) and nutrient agar, respectively. enceforth, the fungal and bacterial cultures were incubated for 72 h at 27°C and for 24 h at 37°C, respectively.

Media Preparation and Standardization of Inoculum.
Nutrient agar (NA), potato dextrose agar (PDA), and Mueller-Hinton agar (MHA) were used for subculturing of bacterial test organism and fungal test organism and determination of antimicrobial activities, respectively. ese media were prepared and sterilized using an autoclave according to the manufacturers' instructions. Two to three bacterial colonies on the plate were picked up with a sterile inoculating loop and transferred into a test tube containing sterile normal saline and vortexes thoroughly. e spores of the test fungi were harvested by washing the surface of the fungal colony using 5 ml of sterile saline solution.
is procedure was repeated until the turbidity of each bacterial and fungal spore suspension matched the turbidity of 0.5 McFarland Standards as described by the Clinical Laboratory Standards Institute [20]. e resulting suspension was used as inoculums for the test pathogen in the antimicrobial susceptibility test.

Disc Diffusion Method.
e discs of 6 mm diameter were prepared from sterile filter paper cut into small, circular pieces of equal size by a perforator and then impregnated. Each of them was impregnated with 0.01 ml of the prepared test extract ethyl acetate solution. e extract impregnated discs were placed onto MHA plates evenly inoculated with test pathogens [21]. Following this step, the impregnated discs were dispensed onto the surface of the inoculated agar plates using sterile forceps [22]. Discs of commercial ampicillin (1 µg/disc) and ketoconazole (1 µg/disc) were used as positive controls for bacterial and fungal pathogens, respectively, and distilled water impregnated discs were used as negative controls. en, the MHA plates were sealed with parafilm and incubated at 37°C for 24 h and 27°C for 72 h for bacterial and fungal pathogens, respectively. e diameters of the zone of inhibition around each disc were measured to the nearest millimeter along two axes (i.e., 90°to each other) using a transparent ruler, and the means of the two readings were recorded.

Determination of Minimum Inhibitory Concentration (MIC).
e oil extracts that showed significant antimicrobial activity in the antimicrobial activity tests were selected for determination of MIC based on the broth dilution method followed by Mousaviet al. [23] with slight modifications. In the broth dilution method, two milliliter of nutrient broth and potato dextrose broth for bacteria and fungi, respectively, were added into all test tubes and 0.1 ml of the prepared concentration of each oil extract was mixed with the nutrient broth and potato dextrose.
ereafter, standardized inoculums of 0.1 ml of the respective test pathogens were dispensed into the test tubes containing the suspensions of the broth and the oil extract. en, all test tubes were properly corked and incubated at 37°C for 24 h for bacteria and 27°C for 72 h for fungi. After that, they were observed for the absence or presence of visible growth. e lowest concentration at which no visible growth of e Scientific World Journal 3 organisms occurs was regarded as the MIC. e experiment was carried out for each test organism in triplicates.

Determination of Minimum Bactericidal (MBC) and Fungicidal Concentrations (MFC).
For the determination of the MBC and MFC, fresh nutrient agar and potato dextrose agar plates were inoculated with a loop taken from each of the broth cultures that showed no growth in the MIC tubes, that is, MBC/MFC values were determined by subculturing from respective MIC values. Antibacterial agents are usually regarded as bactericidal if the MBC is no more than four times the MIC [20]. MBC/MFC is the amount of the extract that kills microbial growth. While MBC assay plates were incubated for 48 h, MFC assay plates were incubated for 3 days. After the incubation periods, the lowest concentration of the extract that did not allow any bacterial or fungal growth on solid medium was regarded as MBC and MFC for the extract [22].

Statistical Data Analysis.
e experimental data (Supplementary Tables S1, S2, and S3) were subjected to analysis of variance (ANOVA) using ProcGLM and least significance difference (LSD) t-test programs of SAS version 9.2 [24] to investigate the statistical significance between different oil quality parameters. Differences between means were considered statistically significant at p < 0.05.

Physicochemical Properties of Oils from Garlic (Allium sativum L.) Bulbs and Leek (Allium ampeloprasum L.) Leaf
Oils. Physicochemical properties of A. sativum bulb and A. ampeloprasum leaf oil extracts were determined based on oil content, specific gravity, acid value, free fatty acids, and peroxide values as given in Table 1. Significance differences between garlic bulbs and leek leaf oils were obtained for all measured parameters except for specific gravity. Significantly higher oil yield (21.25%), ACV (2.66 mg/g), FFA (1.34), and PV (4.10 meq/kg) were recorded for leek leaf oil extract. A similar study was conducted by Rafe and Nadjafi [25] in which the chemical analyses revealed 2.5 as the acid value, 1.27 for free fatty acids, 1.8 as the saponification value, and 14.5 as the iodine value of garlic oil.
Shalaby et al. [26] indicated volatile oil composition of (0.073% ± 0.1) for A. sativum and (0.59% ± 0.0) for A. cepa. Boukeria et al. [27] suggested that variation observed in essential oils yield, between varieties of each species, may be explained by the differences in genetic background of the targeted plant and/or to the extraction protocol followed during the experiment. Specific gravity is a characteristic used in the classification of essential oils. e specific gravity of oil is defined as the mass ratio of a volume of oil to that of an equal volume of distilled water, both held at 20°C [28]. Measuring the specific gravity of different essential oils showed a higher density than water, allowing them to be below water during extraction. e acid index gives an idea about the content of free acids. e acid number less than 2 indicates proper preservation of these oil's weak quantity of free acid [29].

Antioxidant Activities of Garlic Bulb and Leek Leaf Oil
Extracts.
e antioxidant activities of the oil extracted from garlic and onion bulbs were assessed based on DPPH and hydrogen peroxide free radical scavenging activities and ascorbic acid content as given in Table 2. Significantly higher antioxidant activities with respect to DPPH (27.60 ± 1.55%), hydrogen peroxide (12.35 ± 0.92%) free radical scavenging activities, and ascorbic acid content (25.30 ± 3.25%) were obtained for leek leaf oil extract. e higher DPPH value (27.60%) indicates higher antioxidant activities and the presence of higher essential omega-3 fatty acids in leek leaf oil extract. e antioxidant activities of leek leaf oil were found to be significantly higher indicating that leek oil might possess better biological activities, oil quality, and pharmacological applications. A similar study was conducted by Abdel-Salam et al. [30] who suggested the phenolic contents and antioxidant activity were higher in essential oils of garlic, leek, and red onion, whereas the lower contents and activity were shown in aqueous extracts. e DPPH and oxygen radical absorption capacity (ORAC) assays showed that the ethanolic extract of garlic sprouts exhibited stronger antioxidant activities than the ethanolic extract of raw garlic [31]. In addition, the antioxidant properties of aged garlic were found to be higher than fresh garlic by DPPH, ABTS, FRAP, H 2 O 2 scavenging, and Fe2 + chelating assays [32]. Compared with multi clove garlic extract, single clove garlic extract had a higher amount of phenolic compounds and showed stronger antioxidant activity [33]. Moreover, the antioxidant activity of black garlic increased with thermal treatment, and the highest antioxidant activity was obtained on the 21 st day of processing [34,35]. Also, the increased pressure improved the antioxidant activity of garlic paste [36]. However, the antioxidant activity of "Laba" garlic, a traditional Chinese garlic product, decreased during fermentation [37].

Antimicrobial Activities of Garlic Bulb and Leek Leaf Oil
Extracts.
e disk diffusion method was used to measure the diameter of inhibition zone. e diameter of inhibition zone for garlic and leek leaf oil extracts is given in Table 3. Both garlic and leek oil extracts presented significantly lower inhibition as compared to positive controls including ampicillin for the antibacterial activity test and ketoconazole for the antifungal activity test. Significance differences were recorded for both garlic and onion bulb oil extracts at different concentration levels. e mean zone of inhibition at highest concentration (3 µg/ml) against bacterial test pathogens ranged from 12.93 ± 0.40 mm to 16.00 ± 0.50 mm, while 0.00 ± 0.00 to 13.50 ± 0.45 mm against fungal test pathogens. Stronger antibacterial activity with maximum zone of inhibition (16.00 mm) was recorded for leek oil extract against S. pyogenes indicating that S. pyogenes was more susceptible than S. boyelli.
On the other hand, the stronger antifungal activity with maximum zone of inhibition (13.50 mm) was recorded for 4 e Scientific World Journal garlic bulb oil extract against Candida albicans as the weaker antifungal activity with zero zone of inhibition (0.00 mm) was observed for leek oil against A. niger. e crude garlic oil extracted by diethyl ether solvent exhibited marked inhibition activity against bacteria, and inhibition was stronger than those of garlic oil extracted by hydrodistillation [38].
Allium essential oils were more effective as compared to aqueous extracts. At 100% dilution, the maximum zone of inhibition was observed against K. oxytoca, a Gram-negative organism, and the minimum was against E. coli, a Gramnegative, and S. aureus, a Gram-positive organism, for the garlic essential oil [39].

Minimum Inhibitory Concentration (MIC), Minimum Bactericidal Concentration (MBC), and Minimum Fungicidal Concentration (MFC) of Oils from Garlic Bulb and Leek Leaf
Oil Extracts. e antimicrobial efficacy of garlic bulb and leek leaf oil extracts against pathogenic microbes was evaluated by MIC, MBC, and MFC as given in Table 4. e oil extracts from leek leaf have exhibited stronger bactericidal activity with MIC (0.20 µg/ml) and MBC (0.45 µg/ml) against S. pyogenes indicating that S. pyogenes was more susceptible to the oil extract and also indicating leek oil possesses stronger antibacterial potential. By contrast, garlic bulb oil extract has demonstrated stronger antifungal activity with MIC (0.40 µg/ml, the least value) and MFC (0.75 µg/ml) against C. albicans showing that C. albicans was more susceptible to the oil extract than A. niger, and the garlic bulb oil was more effective antifungal potential than leek leaf oil extract.

Conclusion
e result indicated that oils extracts of both garlic bulb and leek leaves demonstrated considerable biological activities as antioxidant and antimicrobial potentials. Leek oil was found to have stronger antioxidant and antibacterial potential. However, garlic bulb oil demonstrated better antifungal   Means followed by same letter within a column were not significantly different at 0.05 probability level based on the LSD (least significance difference) test. ACV, acid value; FFA, free fatty acids; PV, peroxide value. Means followed by same letter within a column were not significantly different at 0.05 probability level based on the LSD (least significant difference) test. DPPH, 2, 2-diphenyl-1-picrylhydrazyl; HPSA, hydrogen peroxide scavenging activity. e Scientific World Journal 5 potential. Both garlic and leek oil extracts exhibited marked inhibition activity against bacteria at high concentrations. erefore, the oil extracts of both Allium spp. can be used as a potential source of ingredients for sustainable pharmaceutical and nutraceutical industries in further study conducted on them.

Data Availability
e data used to support the findings of this study are included within the supplementary information file.

Conflicts of Interest
e authors declare that there are no conflicts of interest.

Authors' Contributions
Zekeria Yusuf initiated and designed the study and performed lab experiment and data analysis. Elias lemma and Sewnet Mengistu performed lab experiment, collected data, and wrote the manuscript. Sultan Seyida, MegersaIdris, Jemal Teneshu, and Mulugeta Desta analyzed and interpreted data. All authors contributed to drafting the article and revising it critically for important intellectual content.